A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

L

l - Variable in class org.reprap.devices.ExtruderState

lastEnding - Static variable in class org.reprap.comms.GCodeReaderAndWriter

How does the last file name in a multiple set end?

lastPicked - Variable in class org.reprap.gui.RepRapBuild

lastScreenPosition - Static variable in class org.reprap.gui.ContinuationMesage

lastTemperatureUpdate - Variable in class org.reprap.devices.SNAPExtruder

layer - Variable in class org.reprap.gui.botConsole.BotConsoleFrame

layerConditions - Variable in class org.reprap.geometry.LayerProducer

layerNumber - Variable in class org.reprap.geometry.polygons.AllSTLsToBuild.SliceCache

layerPause(boolean) - Method in class org.reprap.gui.botConsole.PrintTabFrame

layerPause() - Method in class org.reprap.machines.GenericRepRap

Display a message indicating a layer is about to be printed and wait for the user to acknowledge

layerPause - Variable in class org.reprap.Main

layerPauseCheck - Variable in class org.reprap.gui.botConsole.PrintTabFrame

layerPauseCheckActionPerformed(ActionEvent) - Method in class org.reprap.gui.botConsole.PrintTabFrame

layerPauseCheckbox - Variable in class org.reprap.machines.GenericRepRap

layerPointer - Variable in class org.reprap.geometry.LayerRules

index into layerRecord

LayerProducer - Class in org.reprap.geometry

LayerProducer(RrPolygonList[], LayerRules, RrGraphics) - Constructor for class org.reprap.geometry.LayerProducer

Set up a normal layer

LayerRules - Class in org.reprap.geometry

This stores a set of facts about the layer currently being made, and the rules for such things as infill patterns, support patterns etc.

LayerRules(Printer, double, double, int, int, boolean, RrRectangle) - Constructor for class org.reprap.geometry.LayerRules

layerRules - Variable in class org.reprap.geometry.Producer

layFoundationTopDown(RrRectangle) - Method in class org.reprap.geometry.Producer

layingSupport - Variable in class org.reprap.geometry.LayerRules

Putting down foundations?

leaf(Rr2Point) - Method in class org.reprap.geometry.polygons.RrCSG

leaf find the half-plane that generates the value for a point

leaf - Variable in class org.reprap.utilities.BooleanExpression

leafCount - Variable in class org.reprap.utilities.BooleanExpression

leafCount() - Method in class org.reprap.utilities.BooleanExpression

leafOp - Variable in class org.reprap.utilities.BooleanExpression

legendName - Static variable in class org.reprap.RFO

length() - Method in class org.reprap.devices.ExtruderState

length() - Method in class org.reprap.geometry.polygons.RrInterval

Size

length() - Method in class org.reprap.utilities.TableRow

lessGridSquare - Static variable in class org.reprap.Preferences

lessGridSquare() - Static method in class org.reprap.Preferences

lineNumber - Variable in class org.reprap.comms.GCodeReaderAndWriter

The current linenumber

LinePrinter - Class in org.reprap.devices.pseudo

This is a pseudo device that provides an apparent single device for plotting lines.

LinePrinter(AxisMotor, AxisMotor, Extruder) - Constructor for class org.reprap.devices.pseudo.LinePrinter

listConvexHull() - Method in class org.reprap.geometry.polygons.RrPolygon

listPoint(int, List<Integer>) - Method in class org.reprap.geometry.polygons.RrPolygon

find a point from a list of polygon points

load(String) - Static method in class org.reprap.RFO

This is what gets called to read an rfo file from filename fn.

loadBool(String) - Method in class org.reprap.Preferences

loadConfig(String) - Static method in class org.reprap.Preferences

loadDouble(String) - Method in class org.reprap.Preferences

loadedFiles - Variable in class org.reprap.gui.botConsole.PrintTabFrame

loadedFilesLong - Variable in class org.reprap.gui.botConsole.PrintTabFrame

loadExtruders() - Method in class org.reprap.machines.GCodeRepRap

loadExtruders() - Method in class org.reprap.machines.GenericRepRap

loadGCode - Variable in class org.reprap.gui.botConsole.PrintTabFrame

LoadGCode(ActionEvent) - Method in class org.reprap.gui.botConsole.PrintTabFrame

loadGCodeFileForMaking() - Method in class org.reprap.comms.GCodeReaderAndWriter

loadGCodeFileForMaking() - Method in class org.reprap.machines.GCodeRepRap

Load a GCode file to be made.

loadGCodeFileForMaking() - Method in class org.reprap.machines.GenericRepRap

Load a GCode file to be made.

loadGCodeFileForMaking() - Method in class org.reprap.machines.Simulator

Load a GCode file to be made.

loadGCodeFileForMaking() - Method in interface org.reprap.Printer

loadGlobalBool(String) - Static method in class org.reprap.Preferences

loadGlobalDouble(String) - Static method in class org.reprap.Preferences

loadGlobalInt(String) - Static method in class org.reprap.Preferences

loadGlobalString(String) - Static method in class org.reprap.Preferences

loadInt(String) - Method in class org.reprap.Preferences

loadMotors() - Method in class org.reprap.machines.GCodeRepRap

loadMotors() - Method in class org.reprap.machines.GenericRepRap

loadMotors() - Method in class org.reprap.machines.Simulator

loadRFO - Variable in class org.reprap.gui.botConsole.PrintTabFrame

loadRFO(ActionEvent) - Method in class org.reprap.gui.botConsole.PrintTabFrame

loadRFOFileForMaking() - Method in class org.reprap.machines.GenericRepRap

Load an RFO file to be made.

loadRFOFileForMaking() - Method in interface org.reprap.Printer

loadSingleSTL(String, Attributes, Vector3d, STLObject) - Method in class org.reprap.gui.STLObject

Actually load the stl file and set its attributes.

loadSTL - Variable in class org.reprap.gui.botConsole.PrintTabFrame

loadSTL(ActionEvent) - Method in class org.reprap.gui.botConsole.PrintTabFrame

loadString(String) - Method in class org.reprap.gui.Preferences

Get the value corresponding to name from the preferences file

loadString(String) - Method in class org.reprap.Preferences

localNodeNumber - Static variable in class org.reprap.Main

location - Variable in class org.reprap.RFO.XMLIn

File location for reading (eg for an input STL file).

lock() - Method in interface org.reprap.comms.Communicator

lock() - Method in class org.reprap.devices.SNAPExtruder

Method to lock communication to this device.

lock() - Method in class org.reprap.devices.SNAPStepperMotor

Method to lock communication to this device.

low - Variable in class org.reprap.geometry.polygons.RrInterval

low() - Method in class org.reprap.geometry.polygons.RrInterval

lowerFineLayers - Variable in class org.reprap.devices.GenericExtruder

below this infill finely