Python: module skeinforge_tools.craft

skeinforge_tools.craft_plugins.hop ($Date: 2008/21/04 $)

index
/home/enrique/Desktop/backup/babbleold/script/reprap/pyRepRap/skeinforge_tools/craft_plugins/hop.py

Hop is a script to raise the extruder when it is not extruding. The hop manual page is at: http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Hop Operation Settings Hop Over Layer Thickness Minimum Hop Angle Examples

`Operation`

The default 'Activate Hop' checkbox is off. It is off because Vik and Nophead found better results without hopping. When it is on, the functions described below will work, when it is off, the functions will not be called. Settings Hop Over Layer Thickness Default is one. Defines the ratio of the hop height over the layer thickness, this is the most important hop setting. Minimum Hop Angle Default is 20 degrees. Defines the minimum angle that the path of the extruder will be raised. An angle of ninety means that the extruder will go straight up as soon as it is not extruding and a low angle means the extruder path will gradually rise to the hop height. Examples The following examples hop the file Screw Holder Bottom.stl. The examples are run in a terminal in the folder which contains Screw Holder Bottom.stl and hop.py. > python hop.py This brings up the hop dialog. > python hop.py Screw Holder Bottom.stl The hop tool is parsing the file: Screw Holder Bottom.stl .. The hop tool has created the file: .. Screw Holder Bottom_hop.gcode > python Python 2.5.1 (r251:54863, Sep 22 2007, 01:43:31) [GCC 4.2.1 (SUSE Linux)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import hop >>> hop.main() This brings up the hop dialog. >>> hop.writeOutput( 'Screw Holder Bottom.stl' ) The hop tool is parsing the file: Screw Holder Bottom.stl .. The hop tool has created the file: .. Screw Holder Bottom_hop.gcode

Previous / Next / Contents

Modules

__init__
skeinforge_tools.skeinforge_utilities.consecution
skeinforge_tools.skeinforge_utilities.euclidean
skeinforge_tools.skeinforge_utilities.gcodec
skeinforge_tools.skeinforge_utilities.interpret
math
skeinforge_tools.meta_plugins.polyfile
skeinforge_tools.profile
skeinforge_tools.skeinforge_utilities.settings
sys

Classes



HopRepository
HopSkein

class HopRepository

    A class to handle the hop settings.

Methods defined here:

__init__(self)
Set the default settings, execute title & settings fileName.

execute(self)
Hop button has been clicked.

class HopSkein

    A class to hop a skein of extrusions.

Methods defined here:

__init__(self)

getCraftedGcode(self, gcodeText, hopRepository)
Parse gcode text and store the hop gcode.

getHopLine(self, line)
Get hopped gcode line.

isNextTravel(self)
Determine if there is another linear travel before the thread ends.

parseInitialization(self, hopRepository)
Parse gcode initialization and store the parameters.

parseLine(self, line)
Parse a gcode line and add it to the bevel gcode.

Functions

getCraftedText(fileName, text, hopRepository=None)
Hop a gcode linear move text.

getCraftedTextFromText(gcodeText, hopRepository=None)
Hop a gcode linear move text.

getNewRepository()
Get the repository constructor.

main()
Display the hop dialog.

writeOutput(fileName='')
Hop a gcode linear move file. Chain hop the gcode if it is not already hopped. If no fileName is specified, hop the first unmodified gcode file in this folder.

Data

__author__ = 'Enrique Perez (perez_enrique@yahoo.com)'
__date__ = '$Date: 2008/21/04 $'
__license__ = 'GPL 3.0'
absolute_import = _Feature((2, 5, 0, 'alpha', 1), (2, 7, 0, 'alpha', 0), 16384)

Author

Enrique Perez (perez_enrique@yahoo.com)

Data
		__author__ = 'Enrique Perez (perez_enrique@yahoo.com)' __date__ = '$Date: 2008/21/04 $' __license__ = 'GPL 3.0' absolute_import = _Feature((2, 5, 0, 'alpha', 1), (2, 7, 0, 'alpha', 0), 16384)