skeinforge_tools.craft_plugins.flow ($Date: 2008/21/04 $) | index /home/enrique/Desktop/backup/babbleold/script/reprap/pyRepRap/skeinforge_tools/craft_plugins/flow.py |
The flow script sets the flow rate by writing the M108 gcode.
Operation
Settings
Flow Rate
Examples
Operation
The default 'Activate Flow' checkbox is on. When it is on, the functions described below will work, when it is off, the functions will not be called.
Settings
Flow Rate
Default is 210.
Defines the flow rate which will be written following the M108 command. The flow rate is usually a PWM setting, but could be anything, like the rpm of the tool or the duty cycle of the tool.
Examples
The following examples flow the file Screw Holder Bottom.stl. The examples are run in a terminal in the folder which contains Screw Holder Bottom.stl and flow.py.
> python flow.py
This brings up the flow dialog.
> python flow.py Screw Holder Bottom.stl
The flow tool is parsing the file:
Screw Holder Bottom.stl
..
The flow tool has created the file:
.. Screw Holder Bottom_flow.gcode
> python
Python 2.5.1 (r251:54863, Sep 22 2007, 01:43:31)
[GCC 4.2.1 (SUSE Linux)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import flow
>>> flow.main()
This brings up the flow dialog.
>>> flow.writeOutput( 'Screw Holder Bottom.stl' )
The flow tool is parsing the file:
Screw Holder Bottom.stl
..
The flow tool has created the file:
.. Screw Holder Bottom_flow.gcode
Classes | ||||||||||||||||||
|
Functions | ||
|
Data | ||
__author__ = 'Enrique Perez (perez_enrique@yahoo.com)' __date__ = '$Date: 2008/21/04 $' __license__ = 'GPL 3.0' absolute_import = _Feature((2, 5, 0, 'alpha', 1), (2, 7, 0, 'alpha', 0), 16384) |
Author | ||
Enrique Perez (perez_enrique@yahoo.com) |