Python: module skeinforge_tools.craft

skeinforge_tools.craft_plugins.clip ($Date: 2008/21/04 $)

index
/home/enrique/Desktop/backup/babbleold/script/reprap/pyRepRap/skeinforge_tools/craft_plugins/clip.py

Clip clips the ends of loops to prevent bumps from forming. The clip manual page is at: http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Clip Operation Settings Clip Over Perimeter Width Connect Loops Examples

`Operation`

The default 'Activate Clip' checkbox is on. When it is on, the functions described below will work, when it is off, the functions will not be called. Settings Clip Over Perimeter Width Default is 0.2. Defines the ratio of the amount each end of the loop is clipped over the perimeter width. The total gap will therefore be twice the clip. If the ratio is too high loops will have a gap, if the ratio is too low there will be a bulge at the loop ends. Connect Loops Default is on. When selected, clip will connect nearby loops, combining them into a spiral. Examples The following examples clip the file Screw Holder Bottom.stl. The examples are run in a terminal in the folder which contains Screw Holder Bottom.stl and clip.py. > python clip.py This brings up the clip dialog. > python clip.py Screw Holder Bottom.stl The clip tool is parsing the file: Screw Holder Bottom.stl .. The clip tool has created the file: .. Screw Holder Bottom_clip.gcode > python Python 2.5.1 (r251:54863, Sep 22 2007, 01:43:31) [GCC 4.2.1 (SUSE Linux)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import clip >>> clip.main() This brings up the clip dialog. >>> clip.writeOutput( 'Screw Holder Bottom.stl' ) The clip tool is parsing the file: Screw Holder Bottom.stl .. The clip tool has created the file: .. Screw Holder Bottom_clip.gcode

Previous / Next / Contents

Modules

__init__
skeinforge_tools.skeinforge_utilities.consecution
skeinforge_tools.skeinforge_utilities.euclidean
skeinforge_tools.skeinforge_utilities.gcodec
skeinforge_tools.skeinforge_utilities.intercircle
skeinforge_tools.skeinforge_utilities.interpret
math
skeinforge_tools.meta_plugins.polyfile
skeinforge_tools.profile
skeinforge_tools.skeinforge_utilities.settings
sys

Classes



ClipRepository
ClipSkein

class ClipRepository

    A class to handle the clip settings.

Methods defined here:

__init__(self)
Set the default settings, execute title & settings fileName.

execute(self)
Clip button has been clicked.

class ClipSkein

    A class to clip a skein of extrusions.

Methods defined here:

__init__(self)

addGcodeFromThreadZ(self, thread, z)
Add a gcode thread to the output.

addSegmentToPixelTables(self, location, maskPixelTable, oldLocation)
Add the segment to the layer and mask table.

addTailoredLoopPath(self, line)
Add a clipped loop path.

getConnectionIsCloseWithoutOverlap(self, location, path)
Determine if the connection is close enough and does not overlap another thread.

getCraftedGcode(self, clipRepository, gcodeText)
Parse gcode text and store the clip gcode.

getNextThreadIsACloseLoop(self, path)
Determine if the next thread is a loop.

isNextExtruderOn(self)
Determine if there is an extruder on command before a move command.

linearMove(self, splitLine)
Add to loop path if this is a loop or path.

parseInitialization(self, clipRepository)
Parse gcode initialization and store the parameters.

parseLine(self, line)
Parse a gcode line and add it to the clip skein.

setLayerPixelTable(self)
Set the layer pixel table.

Functions

getCraftedText(fileName, text, clipRepository=None)
Clip a gcode linear move file or text.

getCraftedTextFromText(gcodeText, clipRepository=None)
Clip a gcode linear move text.

getNewRepository()
Get the repository constructor.

main()
Display the clip dialog.

writeOutput(fileName='')
Clip a gcode linear move file. Chain clip the gcode if it is not already clipped. If no fileName is specified, clip the first unmodified gcode file in this folder.

Data

__author__ = 'Enrique Perez (perez_enrique@yahoo.com)'
__date__ = '$Date: 2008/21/04 $'
__license__ = 'GPL 3.0'
absolute_import = _Feature((2, 5, 0, 'alpha', 1), (2, 7, 0, 'alpha', 0), 16384)

Author

Enrique Perez (perez_enrique@yahoo.com)

Data
		__author__ = 'Enrique Perez (perez_enrique@yahoo.com)' __date__ = '$Date: 2008/21/04 $' __license__ = 'GPL 3.0' absolute_import = _Feature((2, 5, 0, 'alpha', 1), (2, 7, 0, 'alpha', 0), 16384)