blob: 78aa509fc1b80c8462e972af3f100fda98ed77ea (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
|
Format is tab separated preferences.
Activate Raft: True
Add Raft, Elevate Nozzle, Orbit and Set Altitude: True
Base Infill Density (ratio): 0.4
Base Layer Thickness over Layer Thickness: 1.0
Base Layers (integer): 1
Base Nozzle Lift over Half Base Layer Thickness (ratio): 0.0
Bottom Altitude: 0.0
Open File to be Rafted /Users/kintel/code/metalab/checkout/reprap/users/metalab/models/cylinder.gts
Infill Overhang (ratio): 0.1
Interface Infill Density (ratio): 0.4
Interface Layer Thickness over Layer Thickness: 1.0
Interface Layers (integer): 1
Interface Nozzle Lift over Half Interface Layer Thickness (ratio): 0.0
Operating Nozzle Lift over Half Layer Thickness (ratio): 0.0
Raft Outset Radius over Extrusion Width (ratio): 10.0
Support Inset over Perimeter Extrusion Width (ratio): 0.0
No Support Material True
Support Material Everywhere False
Support Material on Exterior Only False
Support Minimum Angle (degrees): 60.0
Temperature Change Time Before Raft (seconds): 0.0
Temperature Change Time Before First Layer Outline (seconds): 0.0
Temperature Change Time Before Next Threads (seconds): 0.0
Temperature Change Time Before Support Layers (seconds): 0.0
Temperature Change Time Before Supported Layers (seconds): 0.0
Temperature of Raft (Celcius): 230.0
Temperature of Shape First Layer Outline (Celcius): 230.0
Temperature of Shape First Layer Within (Celcius): 230.0
Temperature of Shape Next Layers (Celcius): 230.0
Temperature of Support Layers (Celcius): 230.0
Temperature of Supported Layers (Celcius): 230.0
windowPositionRaft Preferences 0+0
|
