summaryrefslogtreecommitdiff
path: root/trunk/users/metalab/skeinforge-profiles/Kali/raft.csv
blob: cdf0fe0bea96b25bfb791444d3e75381f634d061 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Format is tab separated preferences.
Activate Raft:	True
Add Raft, Elevate Nozzle, Orbit and Set Altitude:	True
Base Infill Density (ratio):	0.5
Base Layer Thickness over Layer Thickness:	1.0
Base Layers (integer):	1
Base Nozzle Lift over Half Base Layer Thickness (ratio):	0.75
Bottom Altitude:	0.0
Open File to be Rafted	
Infill Overhang (ratio):	0.1
Interface Infill Density (ratio):	0.5
Interface Layer Thickness over Layer Thickness:	1.0
Interface Layers (integer):	2
Interface Nozzle Lift over Half Interface Layer Thickness (ratio):	1.0
Operating Nozzle Lift over Half Layer Thickness (ratio):	1.0
Raft Outset Radius over Extrusion Width (ratio):	15.0
Support Cross Hatch:	False
Support Flowrate over Operating Flowrate (ratio):	1.0
Support Gap over Perimeter Extrusion Width (ratio):	1.0
No Support Material	True
Support Material Everywhere	False
Support Material on Exterior Only	False
Support Minimum Angle (degrees):	60.0
Temperature Change Time Before Raft (seconds):	0.0
Temperature Change Time Before First Layer Outline (seconds):	0.0
Temperature Change Time Before Next Threads (seconds):	0.0
Temperature Change Time Before Support Layers (seconds):	0.0
Temperature Change Time Before Supported Layers (seconds):	0.0
Temperature of Raft (Celcius):	220.0
Temperature of Shape First Layer Outline (Celcius):	220.0
Temperature of Shape First Layer Within (Celcius):	220.0
Temperature of Shape Next Layers (Celcius):	220.0
Temperature of Support Layers (Celcius):	220.0
Temperature of Supported Layers (Celcius):	220.0
windowPositionRaft Preferences	0+0
windowPositionRaft Preferences	0+0