blob: 8a76a9bb3021421a9920e1c71bca16a7644ee354 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
|
#ifndef PINS_H
#define PINS_H
#if MOTHERBOARD == 0
#error The Arduino cannot run the 5D GCode interpreter
/****************************************************************************************
* Arduino pin assignment - left here as they might be useful
*
****************************************************************************************/
#define X_STEP_PIN (byte)2
#define X_DIR_PIN (byte)3
#define X_MIN_PIN (byte)4
#define X_MAX_PIN (byte)9
#define Y_STEP_PIN (byte)10
#define Y_DIR_PIN (byte)7
#define Y_MIN_PIN (byte)8
#define Y_MAX_PIN (byte)13
#define Z_STEP_PIN (byte)19
#define Z_DIR_PIN (byte)18
#define Z_MIN_PIN (byte)17
#define Z_MAX_PIN (byte)16
//extruder pins
#define EXTRUDER_0_MOTOR_SPEED_PIN (byte)11
#define EXTRUDER_0_MOTOR_DIR_PIN (byte)12
#define EXTRUDER_0_HEATER_PIN (byte)6
#define EXTRUDER_0_FAN_PIN (byte)5
#define EXTRUDER_0_TEMPERATURE_PIN (byte)0 // Analogue input
#define EXTRUDER_0_VALVE_DIR_PIN (byte)16 //NB: Conflicts with Max Z!!!!
#define EXTRUDER_0_VALVE_ENABLE_PIN (byte)15
#define EXTRUDER_0_STEP_ENABLE_PIN 5 // 5 - NB conflicts with the fan; set -ve if no stepper
/****************************************************************************************
* Sanguino/RepRap Motherboard with direct-drive extruders
*
****************************************************************************************/
#elif MOTHERBOARD == 1
#define DEBUG_PIN 0
#define X_STEP_PIN (byte)15
#define X_DIR_PIN (byte)18
#define X_MIN_PIN (byte)20
#define X_MAX_PIN (byte)21
#define X_ENABLE_PIN (byte)19
#define Y_STEP_PIN (byte)23
#define Y_DIR_PIN (byte)22
#define Y_MIN_PIN (byte)25
#define Y_MAX_PIN (byte)26
#define Y_ENABLE_PIN (byte)19
#define Z_STEP_PIN (byte)29
#define Z_DIR_PIN (byte)30
#define Z_MIN_PIN (byte)1
#define Z_MAX_PIN (byte)2
#define Z_ENABLE_PIN (byte)31
//extruder pins
#define EXTRUDER_0_MOTOR_SPEED_PIN (byte)12
#define EXTRUDER_0_MOTOR_DIR_PIN (byte)16
#define EXTRUDER_0_HEATER_PIN (byte)14
#define EXTRUDER_0_FAN_PIN (byte)3
#define EXTRUDER_0_TEMPERATURE_PIN (byte)4 // Analogue input
#define EXTRUDER_0_VALVE_DIR_PIN (byte)17
#define EXTRUDER_0_VALVE_ENABLE_PIN (byte)13 // Valve needs to be redesigned not to need this
#define EXTRUDER_0_STEP_ENABLE_PIN (byte)3 // 3 - Conflicts with the fan; set -ve if no stepper
#define EXTRUDER_1_MOTOR_SPEED_PIN (byte)4
#define EXTRUDER_1_MOTOR_DIR_PIN (byte)0
#define EXTRUDER_1_HEATER_PIN (byte)24
#define EXTRUDER_1_FAN_PIN (byte)7
#define EXTRUDER_1_TEMPERATURE_PIN (byte)3 // Analogue input
#define EXTRUDER_1_VALVE_DIR_PIN (byte) 6
#define EXTRUDER_1_VALVE_ENABLE_PIN (byte)5 // Valve needs to be redesigned not to need this
#define EXTRUDER_1_STEP_ENABLE_PIN (byte)-1 // 7 - Conflicts with the fan; set -ve if no stepper
/****************************************************************************************
* RepRap Motherboard with RS485 extruders
*
****************************************************************************************/
#elif MOTHERBOARD == 2
//x axis pins
#define X_STEP_PIN 15
#define X_DIR_PIN 18
#define X_ENABLE_PIN 19
#define X_MIN_PIN 20
#define X_MAX_PIN 21
//y axis pins
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24
#define Y_MIN_PIN 25
#define Y_MAX_PIN 26
//z axis pins
#define Z_STEP_PIN 27
#define Z_DIR_PIN 28
#define Z_ENABLE_PIN 29
#define Z_MIN_PIN 30
#define Z_MAX_PIN 31
//our pin for debugging.
#define DEBUG_PIN 0
//our SD card pins
#define SD_CARD_WRITE 2
#define SD_CARD_DETECT 3
#define SD_CARD_SELECT 4
//our RS485 pins
#define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13
//pin for controlling the PSU.
#define PS_ON_PIN 14
/****************************************************************************************
* Arduino Mega pin assignment
*
****************************************************************************************/
#elif MOTHERBOARD == 3
#error The Arduino Mega is not yet implemented for the 5D GCode interpreter
#else
#error Unknown MOTHERBOARD value in parameters.h
#endif
#endif
|
