1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
/* -*- mode: c++; c-basic-offset: 8; indent-tabs-mode: t -*- */
// Arduino G-code Interpreter
// v1.0 by Mike Ellery - initial software (mellery@gmail.com)
// v1.1 by Zach Hoeken - cleaned up and did lots of tweaks (hoeken@gmail.com)
// v1.2 by Chris Meighan - cleanup / G2&G3 support (cmeighan@gmail.com)
// v1.3 by Zach Hoeken - added thermocouple support and multi-sample temp readings. (hoeken@gmail.com)
// vX.X by Marius Kintel - refactored a bit to save space and clarify code (kintel@sim.no)
#include <HardwareSerial.h>
#include "_init.h"
AxisConfig axes[3] = {
{X_STEP_PIN, X_DIR_PIN, X_MIN_PIN, X_MAX_PIN, X_ENABLE_PIN, INVERT_X_DIR, REFERENCE_X_DIR, ENDSTOP_X_MIN_ENABLED, ENDSTOP_X_MAX_ENABLED, X_STEPS_PER_INCH, X_STEPS_PER_MM, X_MOTOR_STEPS},
{Y_STEP_PIN, Y_DIR_PIN, Y_MIN_PIN, Y_MAX_PIN, Y_ENABLE_PIN, INVERT_Y_DIR, REFERENCE_Y_DIR, ENDSTOP_Y_MIN_ENABLED, ENDSTOP_Y_MAX_ENABLED, Y_STEPS_PER_INCH, Y_STEPS_PER_MM, Y_MOTOR_STEPS},
{Z_STEP_PIN, Z_DIR_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_ENABLE_PIN, INVERT_Z_DIR, REFERENCE_Z_DIR, ENDSTOP_Z_MIN_ENABLED, ENDSTOP_Z_MAX_ENABLED, Z_STEPS_PER_INCH, Z_STEPS_PER_MM, Z_MOTOR_STEPS}
};
//our command string
#define COMMAND_SIZE 128
char cmdbuffer[COMMAND_SIZE];
byte serial_count;
int no_data = 0;
long old_idle_time;
long idle_time;
int delta;
boolean comment = false;
boolean bytes_received = false;
void setup()
{
//Do startup stuff here
Serial.begin(19200);
Serial.println("start");
//other initialization.
init_steppers();
init_extruder();
clear_process_string();
}
void clear_process_string()
{
//init our command buffer
for (uint8_t i=0; i<COMMAND_SIZE; i++) cmdbuffer[i] = 0;
serial_count = 0;
bytes_received = false;
idle_time = millis();
}
void loop()
{
char c;
extruder_manage_temperature(); //keep it hot!
//read in characters if we got them.
if (Serial.available() > 0)
{
c = Serial.read();
// Reset no_data timer
no_data = 0;
idle_time = millis();
if (c == '\r') {
Serial.println("debug: linefeed ?!");
}
else
// commands end with newlines
if (c != '\n')
{
// Start of comment - ignore any bytes received from now on
if (c == '(') comment = true;
// If we're not in comment mode, add it to our array.
if (!comment)
{
cmdbuffer[serial_count] = c;
serial_count++;
}
if (c == ')') comment = false; // End of comment - start listening again
}
bytes_received = true;
}
else
{
// mark no_data if nothing heard for 100 milliseconds
delta = millis() - idle_time;
if (delta >= 100)
// if ((millis() - idle_time) >= 100)
{
no_data++;
old_idle_time = idle_time;
idle_time = millis();
}
}
// if there's a pause or we got a real command, do it
if (bytes_received && (c == '\n' || no_data))
{
if (no_data)
{
Serial.print("NODATA(");
Serial.print(no_data);
Serial.print(" ");
Serial.print((long)millis());
Serial.print(" ");
Serial.print(old_idle_time);
Serial.print(" ");
Serial.print(idle_time);
Serial.print(" ");
Serial.print(delta);
Serial.print("): ");
Serial.println(cmdbuffer);
}
#if (DEBUG == 1)
else
{
Serial.print("debug: ");
Serial.println(cmdbuffer);
}
#endif
//process our command!
process_string(cmdbuffer, serial_count);
//clear command.
clear_process_string();
}
//no data for > 1 sec -> turn off steppers
if (no_data > 10)
disable_steppers();
}
|
