blob: e580710b46e683f2ed2a33ccafaa0ae64b092170 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
|
Format is tab separated raft preferences.
Name Value
Activate Raft: True
Add Raft, Elevate Nozzle, Orbit and Set Altitude: True
Base Infill Density (ratio): 0.3
Base Layer Thickness over Layer Thickness: 2.0
Base Layers (integer): 1
Base Nozzle Lift over Half Base Layer Thickness (ratio): 0.75
Bottom Altitude: 0.0
Open File to be Rafted /home/enrique/Desktop/backup/babbleold/script/reprap/pyRepRap_v0.1/Hollow Square Bottom_comb_raft.gcode
Infill Overhang (ratio): 0.1
Interface Infill Density (ratio): 0.5
Interface Layer Thickness over Layer Thickness: 1.0
Interface Layers (integer): 2
Interface Nozzle Lift over Half Interface Layer Thickness (ratio): 0.9
Operating Nozzle Lift over Half Layer Thickness (ratio): 1.0
Raft Outset Radius over Extrusion Width (ratio): 10.0
Support Cross Hatch: True
Support Flowrate over Operating Flowrate (ratio): 1.0
Support Gap over Perimeter Extrusion Width (ratio): 1.0
No Support Material True
Support Material Everywhere False
Support Material on Exterior Only False
Support Minimum Angle (degrees): 60.0
Temperature Change Time Before Raft (seconds): 0.0
Temperature Change Time Before First Layer Outline (seconds): 0.0
Temperature Change Time Before Next Threads (seconds): 0.0
Temperature Change Time Before Support Layers (seconds): 0.0
Temperature Change Time Before Supported Layers (seconds): 0.0
Temperature of Raft (Celcius): 235.0
Temperature of Shape First Layer Outline (Celcius): 235.0
Temperature of Shape First Layer Within (Celcius): 240.0
Temperature of Shape Next Layers (Celcius): 242.0
Temperature of Support Layers (Celcius): 230.0
Temperature of Supported Layers (Celcius): 230.0
windowPositionRaft Preferences 654+177
|
