path: root/src/hal/user_comps/mb2hal/examples/mb2hal_example_01_arduino/Modbusino/Modbusino.cpp

/*
 * Copyright © 2011-2012 Stéphane Raimbault <stephane.raimbault@gmail.com>
 *
 * License ISC, see LICENSE for more details.
 *
 * This library implements the Modbus protocol.
 * http://libmodbus.org/
 *
 */

#include <inttypes.h>

#if defined(ARDUINO) && ARDUINO >= 100
  #include "Arduino.h"
#else
  #include "WProgram.h"
  #include <pins_arduino.h>
#endif
#include "Modbusino.h"

#define _MODBUS_RTU_SLAVE              0
#define _MODBUS_RTU_FUNCTION           1
#define _MODBUS_RTU_PRESET_REQ_LENGTH  6
#define _MODBUS_RTU_PRESET_RSP_LENGTH  2

#define _MODBUS_RTU_CHECKSUM_LENGTH    2

#define _MODBUSINO_RTU_MAX_ADU_LENGTH  128

/* Supported function codes */
#define _FC_READ_HOLDING_REGISTERS    0x03
#define _FC_WRITE_MULTIPLE_REGISTERS  0x10

enum {
    _STEP_FUNCTION = 0x01,
    _STEP_META,
    _STEP_DATA
};

static uint16_t crc16(uint8_t *req, uint8_t req_length)
{
    uint8_t j;
    uint16_t crc;

    crc = 0xFFFF;
    while (req_length--) {
	crc = crc ^ *req++;
	for (j=0; j < 8; j++) {
	    if (crc & 0x0001)
		crc = (crc >> 1) ^ 0xA001;
	    else
		crc = crc >> 1;
	}
    }

    return (crc << 8  | crc >> 8);
}

ModbusinoSlave::ModbusinoSlave(uint8_t slave) {
    if (slave >= 0 & slave <= 247) {
	_slave = slave;
    }
}

void ModbusinoSlave::setup(long baud) {
    Serial.begin(baud);
}

static int check_integrity(uint8_t *msg, uint8_t msg_length)
{
    uint16_t crc_calculated;
    uint16_t crc_received;

    if (msg_length < 2)
	return -1;

    crc_calculated = crc16(msg, msg_length - 2);
    crc_received = (msg[msg_length - 2] << 8) | msg[msg_length - 1];

    /* Check CRC of msg */
    if (crc_calculated == crc_received) {
        return msg_length;
    } else {
        return -1;
    }
}

static int build_response_basis(uint8_t slave, uint8_t function,
				uint8_t* rsp)
{
    rsp[0] = slave;
    rsp[1] = function;

    return _MODBUS_RTU_PRESET_RSP_LENGTH;
}

static void send_msg(uint8_t *msg, uint8_t msg_length)
{
    uint16_t crc = crc16(msg, msg_length);

    msg[msg_length++] = crc >> 8;
    msg[msg_length++] = crc & 0x00FF;

    Serial.write(msg, msg_length);
}

static uint8_t response_exception(uint8_t slave, uint8_t function,
				  uint8_t exception_code,
				  uint8_t *rsp)
{
    uint8_t rsp_length;

    rsp_length = build_response_basis(slave, function + 0x80, rsp);

    /* Positive exception code */
    rsp[rsp_length++] = exception_code;

    return rsp_length;
}

static void flush(void)
{
    uint8_t i = 0;

    /* Wait a moment to receive the remaining garbage but avoid getting stuck
     * because the line is saturated */
    while (Serial.available() && i++ < 10) {
	Serial.flush();
	delay(3);
    }
}

static int receive(uint8_t *req, uint8_t _slave)
{
    uint8_t i;
    uint8_t length_to_read;
    uint8_t req_index;
    uint8_t step;
    uint8_t function;

    /* We need to analyse the message step by step.  At the first step, we want
     * to reach the function code because all packets contain this
     * information. */
    step = _STEP_FUNCTION;
    length_to_read = _MODBUS_RTU_FUNCTION + 1;

    req_index = 0;
    while (length_to_read != 0) {

	/* The timeout is defined to ~10 ms between each bytes.  Precision is
	   not that important so I rather to avoid millis() to apply the KISS
	   principle (millis overflows after 50 days, etc) */
        if (!Serial.available()) {
	    i = 0;
	    while (!Serial.available()) {
		delay(1);
		if (++i == 10) {
		    /* Too late, bye */
		    return -1;
		}
	    }
        }

	req[req_index] = Serial.read();

        /* Moves the pointer to receive other data */
	req_index++;

        /* Computes remaining bytes */
        length_to_read--;

        if (length_to_read == 0) {
            switch (step) {
            case _STEP_FUNCTION:
                /* Function code position */
		function = req[_MODBUS_RTU_FUNCTION];
		if (function == _FC_READ_HOLDING_REGISTERS) {
		    length_to_read = 4;
		} else if (function == _FC_WRITE_MULTIPLE_REGISTERS) {
		    length_to_read = 5;
		} else {
		    /* Wait a moment to receive the remaining garbage */
		    flush();
		    if (req[_MODBUS_RTU_SLAVE] == _slave ||
			req[_MODBUS_RTU_SLAVE] == MODBUS_BROADCAST_ADDRESS) {
			/* It's for me so send an exception (reuse req) */
			uint8_t rsp_length = response_exception(
			    _slave, function,
			    MODBUS_EXCEPTION_ILLEGAL_FUNCTION,
			    req);
			send_msg(req, rsp_length);
			return - 1 - MODBUS_EXCEPTION_ILLEGAL_FUNCTION;
		    }

		    return -1;
		}
		step = _STEP_META;
		break;
            case _STEP_META:
		length_to_read = _MODBUS_RTU_CHECKSUM_LENGTH;

		if (function == _FC_WRITE_MULTIPLE_REGISTERS)
		    length_to_read += req[_MODBUS_RTU_FUNCTION + 5];

                if ((req_index + length_to_read) > _MODBUSINO_RTU_MAX_ADU_LENGTH) {
		    flush();
		    if (req[_MODBUS_RTU_SLAVE] == _slave ||
			req[_MODBUS_RTU_SLAVE] == MODBUS_BROADCAST_ADDRESS) {
			/* It's for me so send an exception (reuse req) */
			uint8_t rsp_length = response_exception(
			    _slave, function,
			    MODBUS_EXCEPTION_ILLEGAL_DATA_VALUE,
			    req);
			send_msg(req, rsp_length);
			return - 1 - MODBUS_EXCEPTION_ILLEGAL_FUNCTION;
		    }
		    return -1;
                }
                step = _STEP_DATA;
                break;
            default:
                break;
            }
        }
    }

    return check_integrity(req, req_index);
}


static void reply(uint16_t *tab_reg, uint16_t nb_reg,
		  uint8_t *req, uint8_t req_length, uint8_t _slave)
{
    uint8_t slave = req[_MODBUS_RTU_SLAVE];
    uint8_t function = req[_MODBUS_RTU_FUNCTION];
    uint16_t address = (req[_MODBUS_RTU_FUNCTION + 1] << 8) +
	req[_MODBUS_RTU_FUNCTION + 2];
    uint16_t nb = (req[_MODBUS_RTU_FUNCTION + 3] << 8) +
	req[_MODBUS_RTU_FUNCTION + 4];
    uint8_t rsp[_MODBUSINO_RTU_MAX_ADU_LENGTH];
    uint8_t rsp_length = 0;

    if (slave != _slave &&
	slave != MODBUS_BROADCAST_ADDRESS) {
	return;
    }

    if (address + nb > nb_reg) {
	rsp_length = response_exception(
	    slave, function,
	    MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, rsp);
    } else {
        req_length -= _MODBUS_RTU_CHECKSUM_LENGTH;

        if (function == _FC_READ_HOLDING_REGISTERS) {
            uint16_t i;

            rsp_length = build_response_basis(slave, function, rsp);
            rsp[rsp_length++] = nb << 1;
            for (i = address; i < address + nb; i++) {
                rsp[rsp_length++] = tab_reg[i] >> 8;
                rsp[rsp_length++] = tab_reg[i] & 0xFF;
            }
        } else {
            uint16_t i, j;

            for (i = address, j = 6; i < address + nb; i++, j += 2) {
                /* 6 and 7 = first value */
                tab_reg[i] = (req[_MODBUS_RTU_FUNCTION + j] << 8) +
                    req[_MODBUS_RTU_FUNCTION + j + 1];
            }

            rsp_length = build_response_basis(slave, function, rsp);
            /* 4 to copy the address (2) and the no. of registers */
            memcpy(rsp + rsp_length, req + rsp_length, 4);
            rsp_length += 4;
        }
    }

    send_msg(rsp, rsp_length);
}

int ModbusinoSlave::loop(uint16_t* tab_reg, uint16_t nb_reg)
{
    int rc = 0;
    uint8_t req[_MODBUSINO_RTU_MAX_ADU_LENGTH];

    if (Serial.available()) {
	rc = receive(req, _slave);
	if (rc > 0) {
	    reply(tab_reg, nb_reg, req, rc, _slave);
	}
    }

    /* Returns a positive value if successful,
       0 if a slave filtering has occured,
       -1 if an undefined error has occured,
       -2 for MODBUS_EXCEPTION_ILLEGAL_FUNCTION
       etc */
    return rc;
}