summaryrefslogtreecommitdiff
path: root/configs/sim/pyvcp_demo/pyvcp_demo1.ini
blob: 19d70de7e14a7d32e04eca9507d949394437a1fe (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
# EMC controller parameters for a simulated machine.

# General note: Comments can either be preceded with a # or ; - either is
# acceptable, although # is in keeping with most linux config files.

# General section -------------------------------------------------------------
[EMC]

# Version of this INI file
VERSION =               $Revision: 1.6 $

# Name of machine, for use with display, etc.
MACHINE =               Pyvcp_demo1

# Name of NML file to use, default is emc.nml
#NML_FILE =              emc.nml

# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
# DEBUG =               0x7FFFFFFF
DEBUG = 0

# Sections for display options ------------------------------------------------
[DISPLAY]

# Name of display program, e.g., xemc
DISPLAY =             axis

PYVCP = pyvcp_demo1.xml

# Cycle time, in seconds, that display will sleep between polls
CYCLE_TIME =            0.100

# Path to help file
HELP_FILE =             doc/help.txt

# Initial display setting for position, RELATIVE or MACHINE
POSITION_OFFSET =       RELATIVE

# Initial display setting for position, COMMANDED or ACTUAL
POSITION_FEEDBACK =     ACTUAL

# Highest value that will be allowed for feed override, 1.0 = 100%
MAX_FEED_OVERRIDE =     1.2
MAX_SPINDLE_OVERRIDE =  1.0
# Prefix to be used
PROGRAM_PREFIX = /root/emc2/ngc/

# Introductory graphic
INTRO_GRAPHIC = emc2.gif
INTRO_TIME = 5

EDITOR = gedit

INCREMENTS = 5mm 1mm .5mm .1mm .05mm .01mm
#INCREMENTS = 1 mm, .01 in, .1mm, 1 mil, .1 mil, 1/8000 in

[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Grayscale Depth Image
PROGRAM_EXTENSION = .py Python Script
PROGRAM_EXTENSION = .nc, .NC

png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
dxf = image-to-gcode
py = python
nc = /usr/bin/axis

# Task controller section -----------------------------------------------------
[TASK]

# Name of task controller program, e.g., milltask
TASK =                  milltask

# Cycle time, in seconds, that task controller will sleep between polls
CYCLE_TIME =            0.001

# Part program interpreter section --------------------------------------------
[RS274NGC]

# File containing interpreter variables
PARAMETER_FILE =        sim_mm.var

# Motion control section ------------------------------------------------------
[EMCMOT]

EMCMOT =              motmod

# Timeout for comm to emcmot, in seconds
COMM_TIMEOUT =          1.0

# Interval between tries to emcmot, in seconds
COMM_WAIT =             0.010

# BASE_PERIOD is unused in this configuration but specified in core_sim.hal
BASE_PERIOD  =               0
# Servo task period, in nano-seconds
SERVO_PERIOD =               1000000

# Hardware Abstraction Layer section --------------------------------------------------
[HAL]

# The run script first uses halcmd to execute any HALFILE
# files, and then to execute any individual HALCMD commands.
#

# list of hal config files to run through halcmd
# files are executed in the order in which they appear
HALFILE =                    core_sim.hal
HALFILE =		     axis_manualtoolchange.hal
HALFILE = simulated_home.hal
#HALFILE = gamepad.hal

# list of halcmd commands to execute
# commands are executed in the order in which they appear
#HALCMD =                    save neta

# Single file that is executed after the GUI has started.  Only supported by
# AXIS at this time (only AXIS creates a HAL component of its own)
POSTGUI_HALFILE = custom.hal

HALUI = halui

[HALUI]
# add halui MDI commands here (max 64)

# Trajectory planner section --------------------------------------------------
[TRAJ]

AXES =                  3
COORDINATES =           X Y Z
HOME =                  0 0 0
LINEAR_UNITS =          mm
ANGULAR_UNITS =         degree
CYCLE_TIME =            0.010
DEFAULT_VELOCITY =      30.48
MAX_VELOCITY =          53.34
DEFAULT_ACCELERATION =  508
MAX_ACCELERATION =      508
POSITION_FILE = position_mm.txt

# Axes sections ---------------------------------------------------------------

# First axis
[AXIS_0]

TYPE =                          LINEAR
HOME =                          0.000
MAX_VELOCITY =                  30.48
MAX_ACCELERATION =              508
BACKLASH = 0.000
INPUT_SCALE =                   157.48
OUTPUT_SCALE = 1.000
MIN_LIMIT =                     -254
MAX_LIMIT =                     254
FERROR = 1.27
MIN_FERROR = .254
HOME_OFFSET =                    0.0
HOME_SEARCH_VEL =                0
HOME_LATCH_VEL =                 0
HOME_USE_INDEX =                 NO
#HOME_IGNORE_LIMITS =             YES
HOME_SEQUENCE = 0
#HOME_IS_SHARED = 1

# Second axis
[AXIS_1]

TYPE =                          LINEAR
HOME =                          0.000
MAX_VELOCITY =                  30.48
MAX_ACCELERATION =              508
BACKLASH = 0.000
INPUT_SCALE =                   157.48
OUTPUT_SCALE = 1.000
MIN_LIMIT =                     -254
MAX_LIMIT =                     254
FERROR = 1.27
MIN_FERROR = .254
HOME_OFFSET =                    0.0
HOME_SEARCH_VEL =                0
HOME_LATCH_VEL =                 0
#HOME_USE_INDEX =                 NO
#HOME_IGNORE_LIMITS =             NO
HOME_SEQUENCE = 0

# Third axis
[AXIS_2]

TYPE =                          LINEAR
HOME =                          0.0
MAX_VELOCITY =                  30.48
MAX_ACCELERATION =              508
BACKLASH = 0.000
INPUT_SCALE =                   157.48
OUTPUT_SCALE = 1.000
MIN_LIMIT =                     -150
MAX_LIMIT =                     101.6
FERROR = 1.27
MIN_FERROR = .254
HOME_OFFSET =                    0
HOME_SEARCH_VEL =                0
HOME_LATCH_VEL =                 0
#HOME_USE_INDEX =                 NO
#HOME_IGNORE_LIMITS =             NO
HOME_SEQUENCE = 0
#HOME_IS_SHARED = 1

# section for main IO controller parameters -----------------------------------
[EMCIO]

# Name of IO controller program, e.g., io
EMCIO = 		io

# cycle time, in seconds
CYCLE_TIME =    0.100

# tool table file
TOOL_TABLE =    sim_mm.tbl
TOOL_CHANGE_POSITION = 0 0 50.8
#RANDOM_TOOLCHANGER = 1