blob: d360ebb71512aa15aadcf42b42d11d5551137de8 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
|
xhc-hb04-layout2
18 buttons:
---------------------------------------
|RESET |Stop | |
---------------------------------------
|GotoZero|Start/Pause|Rewind |Probe-Z |
---------------------------------------
|Spindle | =1/2 | =0 |Safe-Z |
---------------------------------------
|GotoHome|Macro-1 |Macro-2|Macro-3 |
---------------------------------------
|STEP |Mode |Macro-6|Macro-7 |
---------------------------------------
| Off |
| X |
| Y |
| Rotary -------> Z |
| Switch A |
| Spindle |
| Feed |
---------------------------------------
Button codes defined in xhc-hb04-layout2.cfg
The Start/Pause button can be connected for standard behavior with:
[XHC_HB04_BUTTON]start-pause = std_start_pause
The STEP button is normally connected with:
[XHC_HB04_BUTTON]step = xhc-hb04.stepsize-up
The other buttons can be connected to hal pins -- typically halui provided pins.
MDI commands can be executed using halui.mdi-command-nn pins defined in the ini file with entries like: [HALUI]MDI_COMMAND = mdi_command
The rotary switch selects the axis, spindle, or feedoverride for control by the jogwheel.
The switch positions (xyza) can be defined to any available axis (xyzc for instance).
|
