blob: 08ec7378d07be41486a2ca6672900ca869f007aa (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
|
# core HAL config file for steppers
# first load the core RT modules that will be needed
# kinematics
loadrt trivkins
# motion controller, get name and thread periods from ini file
loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[TRAJ]AXES
# stepper module, three step generators, all three using step/dir
loadrt stepgen step_type=0,0,0
# hook functions to base thread (high speed thread for step generation)
addf stepgen.make-pulses base-thread
# hook functions to servo thread
addf stepgen.capture-position servo-thread
addf motion-command-handler servo-thread
addf motion-controller servo-thread
addf stepgen.update-freq servo-thread
# connect position commands from motion module to step generator
net Xpos-cmd axis.0.motor-pos-cmd => stepgen.0.position-cmd
net Ypos-cmd axis.1.motor-pos-cmd => stepgen.1.position-cmd
net Zpos-cmd axis.2.motor-pos-cmd => stepgen.2.position-cmd
# connect position feedback from step generators
# to motion module
net Xpos-fb stepgen.0.position-fb => axis.0.motor-pos-fb
net Ypos-fb stepgen.1.position-fb => axis.1.motor-pos-fb
net Zpos-fb stepgen.2.position-fb => axis.2.motor-pos-fb
# connect enable signals for step generators
net Xen axis.0.amp-enable-out => stepgen.0.enable
net Yen axis.1.amp-enable-out => stepgen.1.enable
net Zen axis.2.amp-enable-out => stepgen.2.enable
# connect signals to step pulse generator outputs
net Xstep <= stepgen.0.step
net Xdir <= stepgen.0.dir
net Ystep <= stepgen.1.step
net Ydir <= stepgen.1.dir
net Zstep <= stepgen.2.step
net Zdir <= stepgen.2.dir
# set stepgen module scaling - get values from ini file
setp stepgen.0.position-scale [AXIS_0]SCALE
setp stepgen.1.position-scale [AXIS_1]SCALE
setp stepgen.2.position-scale [AXIS_2]SCALE
# set stepgen module accel limits - get values from ini file
setp stepgen.0.maxaccel [AXIS_0]STEPGEN_MAXACCEL
setp stepgen.1.maxaccel [AXIS_1]STEPGEN_MAXACCEL
setp stepgen.2.maxaccel [AXIS_2]STEPGEN_MAXACCEL
|
