summaryrefslogtreecommitdiff
path: root/configs/attic/dallur-thc/dallur-advanced.ini
blob: 3c609aa7446b4a5aacb729e092165856929c3a08 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
# EMC controller parameters for generic controller. Make these what you need
# for your system.

# General note: Comments can either be preceded with a # or ; - either is
# acceptable, although # is in keeping with most linux config files.


# General section -------------------------------------------------------------
[EMC]

# Version of this INI file
VERSION =               $Revision$

# Name of machine, for use with display, etc.
MACHINE =               LinuxCNC-DALLUR-ADVANCED

# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
# DEBUG =                 0x00000001
# DEBUG =               0x00000007
# DEBUG =               0x7FFFFFFF
DEBUG = 0

# Enable Adaptive Feedrate for THC
# Enable adaptive feed input, we use it for feedhold button and to
# prevent motion during inverse-homing of torch and for pierce delay
RS274NGC_STARTUP_CODE = M52 P1

# Sections for display options ------------------------------------------------
[DISPLAY]

# Name of display program, e.g., xemc
# DISPLAY =             axis
# DISPLAY =		xemc
# DISPLAY =             usrmot
 DISPLAY = 		tkemc
# Cycle time, in seconds, that display will sleep between polls
CYCLE_TIME =            0.200

# Path to help file
HELP_FILE =             tklinucnc.txt

# Initial display setting for position, RELATIVE or MACHINE
POSITION_OFFSET =       RELATIVE

# Initial display setting for position, COMMANDED or ACTUAL
POSITION_FEEDBACK =     ACTUAL

# Highest value that will be allowed for feed override, 1.0 = 100%
MAX_FEED_OVERRIDE =     1.2

# Prefix to be used
PROGRAM_PREFIX = ../../nc_files/

# Introductory graphic
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 2

# Increments for the JOG section
INCREMENTS = 1000 10 1 0.1 0.01

# Task controller section -----------------------------------------------------
[TASK]

# Name of task controller program, e.g., milltask
TASK =                  milltask

# Cycle time, in seconds, that task controller will sleep between polls
CYCLE_TIME =            0.010

# Part program interpreter section --------------------------------------------
[RS274NGC]

# File containing interpreter variables
PARAMETER_FILE =        dallur-advanced.var

# Motion control section ------------------------------------------------------
[EMCMOT]

EMCMOT =              motmod

# Timeout for comm to emcmot, in seconds
COMM_TIMEOUT =          1.0

# Interval between tries to emcmot, in seconds
COMM_WAIT =             0.010

# Base task period, in nanoseconds - this is the fastest thread in the machine
#BASE_PERIOD =		      10000
#BASE_PERIOD =		      14107
#BASE_PERIOD = 		      11000
#BASE_PERIOD =		      15000
BASE_PERIOD = 		      20000 
#BASE_PERIOD =                50000
# Servo task period, in nanoseconds - will be rounded to an integer multiple
#   of BASE_PERIOD
SERVO_PERIOD =               1000000

# Hardware Abstraction Layer section --------------------------------------------------
[HAL]

# The run script first uses halcmd to execute any HALFILE
# files, and then to execute any individual HALCMD commands.
#

# HALUI to interact with NML 
# Run before any other HALFILE
HALUI=halui 


# list of hal config files to run through halcmd
# files are executed in the order in which they appear
HALFILE =                    dallur-core_stepper.hal
HALFILE =                    dallur-advanced.hal
HALFILE =                    dallur-halvcp.hal
#HALFILE =                    xylotex_pinout.hal
# HALFILE =                    standard_pinout.hal
# HALFILE =                    simulated_limits.hal


# list of halcmd commands to execute
# commands are executed in the order in which they appear
#HALCMD =                    save neta

# Trajectory planner section --------------------------------------------------
[TRAJ]

AXES =                  3
COORDINATES =           X Y Z
HOME =                  0 0 0
LINEAR_UNITS = 		mm
ANGULAR_UNITS =         degree
CYCLE_TIME =            0.00001
DEFAULT_VELOCITY =      180.00
MAX_VELOCITY =          260.00
DEFAULT_ACCELERATION =  500.0
MAX_ACCELERATION =      2400.0

# Axes sections ---------------------------------------------------------------

# First axis
[AXIS_0]

TYPE =                          LINEAR
HOME =                          0.000
MAX_VELOCITY =                  220
MAX_ACCELERATION =              2400
STEPGEN_MAXACCEL =             	2800 
BACKLASH = 			0.000
SCALE =                   150.333 
OUTPUT_SCALE = 			1.000
MIN_LIMIT =                     0
MAX_LIMIT =                     2100
FERROR = 			1.270
MIN_FERROR = 			0.254
HOME_OFFSET =                   0.0
HOME_SEARCH_VEL =               0.0
HOME_LATCH_VEL =                0.0
HOME_USE_INDEX =                NO
HOME_IGNORE_LIMITS =            NO

# Second axis
[AXIS_1]

TYPE =                          LINEAR
HOME =                          0.000
MAX_VELOCITY =                  240
MAX_ACCELERATION =              2400
STEPGEN_MAXACCEL =              2800
BACKLASH = 			0.000
SCALE =                   150.333 
OUTPUT_SCALE = 			1.000
MIN_LIMIT =                     0.0
MAX_LIMIT =                     6100
FERROR = 			0.127
MIN_FERROR = 			0.254
HOME_OFFSET =                   0.0
HOME_SEARCH_VEL =               0.0
HOME_LATCH_VEL =                0.0
HOME_USE_INDEX =                NO
HOME_IGNORE_LIMITS =            NO

# Third axis
[AXIS_2]

TYPE =                          LINEAR
HOME =                          0.0
MAX_VELOCITY =                  20
MAX_ACCELERATION =              250
STEPGEN_MAXACCEL =              300
BACKLASH = 			0.000
SCALE =                   150.333 
OUTPUT_SCALE = 			1.000
MIN_LIMIT =                     0.0
MAX_LIMIT =                     4000.0
FERROR = 			0.127
#MIN_FERROR = 			0.254
MIN_FERROR = 			500
HOME_OFFSET =                    0.0
HOME_SEARCH_VEL =                0.0
HOME_LATCH_VEL =                 0.0
HOME_USE_INDEX =                 NO
HOME_IGNORE_LIMITS =             NO

# Settings for the Torch Height Control which does not use the stepgen but depends on a PID loop
P =				2500
I =				0.0
D =				0.0
BIAS =				0.0
FF0 =				0.0
FF1 =				0.0
FF2 =				0.0
DEADBAND=			0.000375

# section for main IO controller parameters -----------------------------------
[EMCIO]

# Name of IO controller program, e.g., io
EMCIO = 		io

# cycle time, in seconds
CYCLE_TIME =    0.100

# tool table file
TOOL_TABLE =    dallur-advanced.tbl

# section for external NML server parameters ----------------------------------
[EMCSERVER]
# Uncomment the following line if you need to run a remote GUI.
# EMCSERVER =           emcsvr