/v1.0/

• ../
• 11t17p.stl
• 39t17p.stl
• circuit-board-spacer.scad
• dc-extruder.scad
• extruder-idler-bracket.scad
• frame-vertex.dxf
• frame-vertex.scad
• geared-extruder.scad
• holder-module.scad
• mendel.conf
• mendel.inc
• mendel.scad
• pcb-clamp.scad
• power-bracket.scad
• pulley.scad
• timing-pulley.scad
• x-180-z-bearing-plate_2off.stl
• x-360-z-bearing-plate-bottom-outline.dxf
• x-360-z-bearing-plate-top-outline.dxf
• x-360-z-bearing-plate.scad
• x-axis-side-plate-nut-jig_2off.stl
• x-bar-clamp-m3_6off.stl
• x-bar-clamp-m4.scad
• x-belt-clamp.scad
• x-carriage-lower.scad
• x-carriage-upper.scad
• x-end-bracket.scad
• x-motor-bracket-spacer.scad
• x-motor-bracket.scad
• x-vert-drive-nut-trap.scad
• x-vert-drive-side-plate-180.scad
• x-vert-drive-side-plate-360.scad
• y-bar-clamp.scad
• y-bearing-180-inner_2off.stl
• y-bearing-180-outer-left_1off.stl
• y-bearing-180-outer-right_1off.stl
• y-bearing-360-inner_2off.stl
• y-bearing-360-outer-left_1off.stl
• y-bearing-360-outer-right_1off.stl
• y-belt-clamp.scad
• y-idler-bracket-outline.dxf
• y-idler-bracket.scad
• y-motor-bracket.dxf
• y-motor-bracket_1off.stl
• z-axis-combined-leadscrew-base.scad
• z-bar-top-clamp.scad
• z-leadscrew-base-bar-clamp.scad
• z-leadscrew-base.scad
• z-motor-bracket.scad
• z-opto-bracket_1off.stl
• z-pulley.scad
• z-tensioner.scad