Adzima, Brian J, and Sachin S Velankar. “Pressure drops for droplet flows in microfluidic channels.” Journal of Micromechanics and Microengineering 16 (August 2006): 1504–1510.
Ajaev, Vladimir S. “Modeling Shapes and Dynamics of Con ned Bubbles” (2006).
Aoki, Ryota, Masumi Yamada, Masahiro Yasuda, and Minoru Seki. “In-channel focusing of flowing microparticles utilizing hydrodynamic filtration.” Microfluidics and Nanofluidics 6 (April 2009): 571–576.
Arzt, Eduard. “Fabrication Approaches for Generating Complex Micro- and Nanopatterns on Polymeric Surfaces.” Chemical Reviews 49 (2008).
Baroud, Charles N, Matthieu Robert De Saint Vincent, and Jean-Pierre Delville. “An optical toolbox for total control of droplet microfluidics.” Lab on a Chip 7 (2007): 1029.
Barsotti, Robert J, Michael D Vahey, Ryan Wartena, Yet-ming Chiang, Joel Voldman, and Francesco Stellacci. “Assembly of Metal Nanoparticles into Nanogaps.” Small 3 (March 2007): 488–499.
Basu, Amar S. “Microthermal devices for fluidic actuation by modulation of surface tension” (2008).
Basu, Amar S, and Yogesh B Gianchandani. “A 128-PIXEL DIGITALLY-PROGRAMMABLE MICROFLUIDIC PLATFORM FOR NON-CONTACT DROPLET ACTUATION USING MARANGONI FLOWS Amar S. Basu and Yogesh B. Gianchandani Department of Electrical Engineering, University of Michigan, Ann Arbor, USA.”
Bensimon, D., A J Simon, V. Croquette, and A. Bensimon. “Stretching DNA with a Receding Meniscus: Experiments and Models.” Physical Review Letters 5 (1995): 3–6.
Beyzavi, Ali, and Nam-Trung Nguyen. “Modeling and optimization of planar microcoils.” Journal of Micromechanics and Microengineering 18 (September 2008): 095018.
---. “One-dimensional actuation of a ferrofluid droplet by planar microcoils.” Journal of Physics D: Applied Physics 42 (January 2009): 015004.
Bhagat, Ali Asgar S, Sathyakumar S Kuntaegowdanahalli, Dionysios D Dionysiou, and Ian Papautsky. “Spiral microfluidic nanoparticle separators.” Proceedings of SPIE 6886 (2008): 68860M–68860M–11.
Boncheva, Mila, Derek A Bruzewicz, and George M Whitesides. “Millimeter-scale self-assembly and its applications*.” Structure 75 (2003): 621–630.
Boukellal, Hakim, Šeila Selimović, Yanwei Jia, Galder Cristobal, and Seth Fraden. “Simple, robust storage of drops and fluids in a microfluidic device.” Lab on a Chip 9 (2009): 331.
Cao, Han, Zhaoning Yu, Jian Wang, Jonas O Tegenfeldt, Robert H Austin, Erli Chen, Wei Wu, and Stephen Y Chou. “Fabrication of 10 nm enclosed nanofluidic channels.” Applied Physics Letters 81 (2002): 174.
Carlo, Dino Di, Ki-hun Jeong, and Luke P Lee. “Reagentless mechanical cell lysis by nanoscale barbs in microchannels for sample preparation.” Lab on a Chip 3 (2003): 287.
Chen, Hong, Lin Wang, and Paul C. H Li. “Nucleic acid microarrays created in the double-spiral format on a circular microfluidic disk.” Lab on a Chip 8 (2008): 826.
Chen, Jian Z, Anton A Darhuber, M. Troian, and Sigurd Wagner. “Capacitive sensing of droplets for micro uidic devices based on thermocapillary actuation.” Most (2004): 473–480.
Chen, Jian Z, Sandra M Troian, Anton A Darhuber, and Sigurd Wagner. “Effect of contact angle hysteresis on thermocapillary droplet actuation.” Journal of Applied Physics 97 (2005): 014906.
Cheow, Lih Feng, Levent Yobas, and Dim-Lee Kwong. “Digital microfluidics: Droplet based logic gates.” Applied Physics Letters 90 (2007): 054107.
Cheung, C L, R J Nikolić, C E Reinhardt, and T F Wang. “Fabrication of nanopillars by nanosphere lithography.” Nanotechnology 17 (March 2006): 1339–1343.
Chiou, Pei Yu, Aaron T Ohta, and Ming C Wu. “Massively parallel manipulation of single cells and microparticles using optical images.” Nature 436 (July 2005): 370–372.
Cho, Hanjin, M. (Ash) Parameswaran, and Hua-Zhong Yu. “Fabrication of microsensors using unmodified office inkjet printers.” Sensors and Actuators B: Chemical 123 (May 2007): 749–756.
Choi, Se-Jin, Kahp Y Suh, and Hong H Lee. “A geometry controllable approach for the fabrication of biomimetic hierarchical structure and its superhydrophobicity with near-zero sliding angle.” Nanotechnology 19 (July 2008): 275305.
Chowdhury, Devasish, Anumita Paul, and Arun Chattopadhyay. “Patterning Design in Color at the Submicron Scale.” Nano Letters 1 (August 2001): 409–412.
Concentrator, Microorganism. “A Combined Microfluidic/Dielectrophoretic Microorganism Concentrator.” Electrical Engineering (2005): 1–72.
“Copyright by Anh Quoc Nguyen 2001.” Analysis (2001).
Cox, J Colin, Janel Lape, and Mahmood A Sayed. “Protein fabrication automation.” Protein Science (2007): 379–390.
Cristini, Vittorio, and Yung-Chieh Tan. “Theory and numerical simulation of droplet dynamics in complex flows—a review†.” Lab on a Chip (2004): 257–264.
Darhuber, Anton A, and Sandra M Troian. “P m a m s s.” Annual Review of Fluid Mechanics (2005).
Darhuber, Anton A, Sandra M Troian, and Sigurd Wagner. “Generation of high-resolution surface temperature distributions.” Journal of Applied Physics 91 (2002): 5686.
Dissertation, A. “Electrical Detection of DNA and Integration with Nano-fluidic Channels” (2008).
Ducrée, Jens, Thilo Brenner, Stefan Haeberle, Thomas Glatzel, and Roland Zengerle. “Multilamination of flows in planar networks of rotating microchannels.” Microfluidics and Nanofluidics 2 (January 2006): 78–84.
Egatz-Gómez, Ana, Sonia Melle, Antonio A García, S. A Lindsay, M. Márquez, P. Domínguez-García, Miguel A Rubio, et al. “Discrete magnetic microfluidics.” Applied Physics Letters 89 (2006): 034106.
Farahi, R H, A. Passian, T L Ferrell, and T. Thundat. “Marangoni forces created by surface plasmon decay.” Optics Letters 30 (2005): 616–618.
Farahi, R. H, A. Passian, T. L Ferrell, and T. Thundat. “Microfluidic manipulation via Marangoni forces.” Applied Physics Letters 85 (2004): 4237.
Fiordemondo, Deborah, and Pasquale Stano. “Lecithin-Based Water-In-Oil Compartments as Dividing Bioreactors.” ChemBioChem 8 (November 2007): 1965–1973.
Fluent, Application Examples. “CFD for Microfluidics” (2006): 1–43.
Fredrickson, Carl K, and Z Hugh Fan. “Macro-to-micro interfaces for micro uidic devices.” Lab on a Chip (2004): 526–533.
Fu, Jianping, Pan Mao, and Jongyoon Han. “Nanofilter array chip for fast gel-free biomolecule separation.” Applied Physics Letters 87 (2005): 263902.
Gates, Byron D. “with molds & stamps.” Review Literature And Arts Of The Americas (2005): 44–49.
Gillmor, S D, A J Thiel, T C Strother, L M Smith, and M G Lagally. “Hydrophilic/Hydrophobic Patterned Surfaces as Templates for DNA Arrays.” Langmuir 6 (2000): 7223–7228.
Glatzel, Thomas, Christian Litterst, Claudio Cupelli, Timo Lindemann, Christian Moosmann, Remigius Niekrawietz, Wolfgang Streule, Roland Zengerle, and Peter Koltay. “Computational uid dynamics (CFD) software tools for micro uidic applications – A case study.” Most 37 (2008): 218–234.
Golden, J., L. Shriverlake, K. SAPSFORD, and F. Ligler. “A “do-it-yourself” array biosensor.” Methods 37 (September 2005): 65–72.
Grumann, Markus, Patric Schippers, Michael Dobmeier, Stefan Häberle, Andreas Geipel, Thilo Brenner, Roland Zengerle, Jens Ducrée, Claus Kuhn, and Michael Fritsche. “Stacking of beads into monolayers by flow through flat microfluidic chambers.” Manufacturing Engineering.
Grzybowski, Bartosz A, Ned Bowden, Francisco Arias, Hong Yang, and George M Whitesides. “Modeling of Menisci and Capillary Forces from the Millimeter to the Micrometer Size Range.” Journal of Physical Chemistry B (2001): 404–412.
Hahm, J., and A. Beskok. “Numerical simulation of multiple species detection using hydrodynamic/electrokinetic focusing.” Bulletin Of The Polish Academy Of Sciences Technical Sciences 53 (2005).
Hosokawa, Kazuo, and Mizuo Maeda. “Spatial distribution of laminar flow-assisted dendritic amplification.” Lab on a Chip 9 (2009): 464.
Howell, Peter B, David R Mott, P. Golden, and Frances S Ligler. “Design and evaluation of a Dean vortex-based micromixer.” Lab on a Chip (2004): 663–669.
Hsieh, Chih-Chen, Anthony Balducci, and Patrick S Doyle. “An Experimental Study of DNA Rotational Relaxation Time in Nanoslits.” Time (2007): 5196–5205.
Huang, Lotien Richard, Jonas O Tegenfeldt, Jessica J Kraeft, James C Sturm, Robert H Austin, and Edward C Cox. “A DNA prism for high-speed continuous fractionation of large DNA molecules.” Nature Biotechnology 20 (2002): 1048–1051.
Integration of polymer and metal microstructures using liquid-phase photopolymerization.pdf.
Jeong, Hoon Eui, Sung Hoon Lee, Pilnam Kim, and Kahp Y Suh. “Stretched Polymer Nanohairs by Nanodrawing.” Nano Letters 6 (July 2006): 1508–1513.
Jeong, Hoon Eui, and Kahp Y Suh. “On the role of oxygen in fabricating microfluidic channels with ultraviolet curable materials.” Lab on a Chip 8 (2008): 1787.
Jiao, Z J, X Y Huang, and N-t Nguyen. “Manipulation of a droplet in a planar channel by periodic thermocapillary actuation.” Journal of Micromechanics and Microengineering 18 (April 2008): 045027.
Jinesh, K. B, and J. W. M Frenken. “Capillary Condensation in Atomic Scale Friction: How Water Acts like a Glue.” Physical Review Letters 96 (April 2006): 1–4.
Ju, Y S. “Exploration of thermolithography for micro- and nanomanufacturing.” Aerospace Engineering (2006).
Kim, Hanyoup, Sanhita Dixit, Christopher J Green, and Gregory W Faris. “Nanodroplet real-time PCR system with laser assisted heating.” Optics Express 17 (2009): 283–289.
Kim, Jeong Ah, Keunchang Cho, Mi Sun Shin, Won Gu Lee, Neoncheol Jung, Chanil Chung, and Jun Keun Chang. “A novel electroporation method using a capillary and wire-type electrode.” Biosensors and Bioelectronics 23 (April 2008): 1353–1360.
Kim, Jitae, Hee Jang, Guangyao Jia, Jim V Zoval, and A Da Silva. “Cell lysis on a microfluidic CD (compact disc).” Cell (2004): 1–7.
Kim, Sang Kyung, Jae Hyun Kim, Kwang Pyo Kim, and Taek Dong Chung. “Continuous Low-Voltage dc Electroporation on a Microfluidic Chip with Polyelectrolytic Salt Bridges.” Analytical Chemistry 79 (October 2007): 7761–7766.
Kim, Sun Min, Sung Hoon Lee, and Kahp Yang Suh. “Cell research with physically modified microfluidic channels: A review.” Lab on a Chip 8 (2008): 1015.
Kim, Youn Sang, Hong H Lee, and Paula T Hammond. “High density nanostructure transfer in soft molding using polyurethane acrylate molds and polyelectrolyte multilayers.” Interface Science 14 (2003): 1140–1144.
Kralchevsky, Peter A, and Kuniaki Nagayamaj. “Direct Measurement of Lateral Capillary Forces.” Acs Symposium Series (1993): 3702–3709.
Kuo, Chun-wen, Jau-ye Shiu, and Peilin Chen. “Sub-10 nm Fabrication of Large Area Periodic Nanopillars.” Materials Research (2004): 10–12.
Kusumaatmaja, H., and J M Yeomans. “Controlling drop size and polydispersity using chemically patterned surfaces” (2008): 1–16.
“Lab on paper.” Lab on a Chip 8 (2008): 1988.
Langer, Robert, Andreas Lendlein, Hongyan Jiang, and Oliver Ju. “Light-induced shape-memory polymers ¨.” Nature 434 (2005): 695–697.
Lean, M H. “High Throughput Membrane-less Water Purification.” Water: 1–5.
Lee, Sung Hun, Pilnam Kim, Hoon Eui Jeong, and Kahp Y Suh. “Electrically induced formation of uncapped, hollow polymeric microstructures.” Journal of Micromechanics and Microengineering 16 (November 2006): 2292–2297.
Li, Mao, Shi Tang, Dan Lu, Fangzhong Shen, Meirong Liu, Huan Wang, Ping Lu, Muddasir Hanif, and Yuguang Ma. “Electrochemical deposition of patterning and highly luminescent organic films for light emitting diodes.” Semiconductor Science and Technology 22 (August 2007): 855–858.
Lin, James T. Y, John T. W Yeow, and Weijie Wan. “Controlling two-dimensional movement of microparticles over an electrode array surface.” Biomedical Microdevices 11 (February 2009): 193–200.
Lin, J. T. Y, and J. T. W Yeow. “Enhancing dielectrophoresis effect through novel electrode geometry.” Biomedical Microdevices 9 (October 2007): 823–831.
Linke, H., L D Melling, M J Taormina, M J Francis, V. Narayanan, R P Taylor, and A. Stout. “Self-propelled film-boiling liquids.” Mechanical Engineering.
Lin, Yen-Heng, and Gwo-bin Lee. “An optically induced cell lysis device using dielectrophoresis.” Applied Physics Letters 94 (2009): 033901.
Lithography, Capillary Force. “Capillary Force Lithography.” Advanced Materials 742 (2001): 1386–1389.
LUNDOLESEN, T., M. Dufva, and M. Hansen. “Capture of DNA in microfluidic channel using magnetic beads: Increasing capture efficiency with integrated microfluidic mixer.” Journal of Magnetism and Magnetic Materials 311 (April 2007): 396–400.
Lu, Yao, Weiwei Shi, Lei Jiang, Jianhua Qin, and Bingcheng Lin. “Rapid prototyping of paper-based microfluidics with wax for low-cost, portable bioassay.” Electrophoresis (April 2009): NA–NA.
Martinez, Andres W, Scott T Phillips, Manish J Butte, and George m Whitesides. “Patterned Paper as a Platform for Inexpensive, Low-Volume, Portable Bioassays.” Angewandte Chemie International Edition 46 (February 2007): 1318–1320.
Martinez, Andres W, Scott T Phillips, Benjamin J Wiley, Malancha Gupta, and George M Whitesides. “FLASH: A rapid method for prototyping paper-based microfluidic devices.” Lab on a Chip 8 (2008): 2146.
Mele, Elisa, Andrea Camposeo, Carmela De Marco, Luana Persano, Roberto Cingolani, and Dario Pisignano. “Patterning photo-curable light-emitting organic composites by vertical and horizontal capillarity: a general route to photonic nanostructures.” Nanotechnology 19 (August 2008): 335301.
Member, Senior. “Modeling and Controlling Parallel Tasks in Droplet-Based Micro uidic Systems.” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 25 (2006): 329–339.
Metzler, Ralf, Walter Reisner, Robert Riehn, Robert Austin, and Igor M Sokolov. “Di usion mechanisms of localised knots along a polymer” 2: 1–7.
Miller, Scott M, Sandra M Troian, and Sigurd Wagner. “Direct printing of polymer microstructures on flat and spherical surfaces using a letterpress technique.” Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures 20 (2002): 2320.
Mott, David R, Jr Howell, Joel P Golden, Carolyn R Kaplan, Frances S Ligler, and Elaine S Oran. “Toolbox for the design of optimized microfluidic components.” Lab on a Chip 6 (2006): 540.
Mott, David R, Peter B Howell, Joel Golden, Carolyn R Kaplan, Frances S Ligler, and Elaine S Oran. “Advection Routine for Calculating Streamlines.” Perspective.
Mott, David R, Keith S Obenschain, Peter B Howell, and Elaine S Oran. “Designing Microfluidic Components for Enhanced Surface Delivery Using a Genetic Algorithm Search.” Fluid Dynamics (2008): 1–13.
Nag, Angshuman, Biswa Ranjan Panda, and Arun Chattopadhyay. “Performing chemical reactions in virtual capillary of surface tension-con ned micro uidic devices.” October 65 (2005): 621–630.
Ng, Jessamine M K, Michael J Fuerstman, Bartosz A Grzybowski, Howard A Stone, and George M Whitesides. “Self-Assembly of Gears at a Fluid/Air Interface.” Annual Review of Materials Science (2003): 7948–7958.
Nguyen, Nam-Trung, Kon Meng Ng, and Xiaoyang Huang. “Manipulation of ferrofluid droplets using planar coils.” Applied Physics Letters 89 (2006): 052509.
“No title.” Engineering Sciences 362 (2009): 1037–1058.
Odijk, Theo, and Kluyver Laboratory. “DNA Con ned in Nanochannels: Hairpin Tightening by Entropic Depletion.” Integration The Vlsi Journal.
Oh, Kwang W, and Chong H Ahn. “A review of microvalves.” Journal of Micromechanics and Microengineering 16 (May 2006): R13–R39.
Ookawara, S., D. Street, and K. Ogawa. “Numerical study on development of particle concentration profiles in a curved microchannel.” Chemical Engineering Science 61 (June 2006): 3714–3724.
Oozeki, Nobuo, Shinichi Ookawara, Kohei Ogawa, Patrick Löb, and Volker Hessel. “Characterization of microseparator/classifier with a simple arc microchannel.” AIChE Journal 55 (January 2009): 24–34.
Pamula, Vamsee K, and Krishnendu Chakrabarty. “Cooling of Integrated Circuits Using Droplet-Based Microfluidics.” Most (2003).
Pan, Qinmin, and Min Wang. “Miniature Boats with Striking Loading Capacity Fabricated from Superhydrophobic Copper Meshes.” ACS Applied Materials & Interfaces 1 (February 2009): 420–423.
Pappas, Theron J, and Lisa A Holland. “Fluid steering in a microfluidic chip by means of thermally responsive phospholipids.” Sensors and Actuators B: Chemical 128 (January 2008): 427–434.
Park, M., W. Choi, and O. Park. “Patterning polymer light-emitting diodes by micromolding in capillary.” Current Applied Physics 6 (July 2006): 627–631.
Peng, Xing Yue (Larry), Paul C. H Li, Hua-Zhong Yu, M. Parameswaran (Ash), and Wa Lok (Jacky) Chou. “Spiral microchannels on a CD for DNA hybridizations.” Sensors and Actuators B: Chemical 128 (December 2007): 64–69.
Perozziello, Gerardo. “Packaging of Microfluidic systems: A microfluidic Motherboard Integrating Fluidic and Optical Interconnections.” Technology (2006).
Polymer microstructures formed by moulding in capillaries.pdf.
Prakash, Manu, and Neil Gershenfeld. “Microfluidic Bubble Logic.” Science (2008): 2008–2008.
Reano, R. M, and S. W Pang. “Sealed three-dimensional nanochannels.” Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures 23 (2005): 2995.
Riehn, Robert, Robert H Austin, and James C Sturm. “A Nanofluidic Railroad Switch for DNA.” Nano (2006): 2–5.
Rink, Klaus, and Arvid Bergander. “Non-contact Mesoscale Manipulation Using Laser Induced Convection Flows.” Atomic Energy (2008): 22–26.
Rosenthal, A. “Dielectrophoretic Traps for Single-Particle Patterning.” Biophysical Journal 88 (March 2005): 2193–2205.
Sabourin, D., D. Snakenborg, and M. Dufva. “Interconnection blocks: a method for providing reusable, rapid, multiple, aligned and planar microfluidic interconnections.” Journal of Micromechanics and Microengineering 19 (March 2009): 035021.
Schindler, M., and A. Ajdari. “Droplet traffic in microfluidic networks: A simple model for understanding and designing.” Change (2007).
Schmidt, Peter. “A nanoelectrode lined nanochannel for single- molecule DNA sequencing” (2004).
Shastry, Ashutosh, Marianne J Case, and Karl F Böhringer. “Engineering surface roughness to manipulate droplets in microfluidic systems.” Electrical Engineering: 2–5.
Sinville, Rondedrick, and Steven A Soper. “High resolution DNA separations using microchip electrophoresis.” Journal of Separation Science 30 (July 2007): 1714–1728.
Snakenborg, D., G. Perozziello, O. Geschke, and J P Kutter. “A fast and reliable way to establish fluidic connections to planar microchips.” Journal of Micromechanics and Microengineering 17 (January 2007): 98–103.
Suh, By Kahp Y, and Hong H Lee. “Capillary Force Lithography: Large-Area Patterning, Self-Organization, and Anisotropic Dewetting.” Advanced Functional Materials (2002): 405–413.
Suh, Kahp Y, Ali Khademhosseini, Sangyong Jon, and Robert Langer. “Direct Confinement of Individual Viruses within Polyethylene Glycol (PEG) Nanowells.” Nano (2006): 11–16.
Suh, Kahp Y, and Hong H Lee. “Formation of complex polymeric microstructures through physical self-organization and capillary dynamics.” Journal of Micromechanics and Microengineering 15 (February 2005): 400–407.
Suh, K. Y, Joonhyung Park, and Hong H Lee. “Controlled polymer dewetting by physical confinement.” The Journal of Chemical Physics 116 (2002): 7714.
Suk, Ji Won, and Jun-Hyeong Cho. “Capillary flow control using hydrophobic patterns.” Journal of Micromechanics and Microengineering 17 (April 2007): N11–N15.
Sun, Kang, Zongxing Wang, and Xingyu Jiang. “Modular microfluidics for gradient generation.” Lab on a Chip 8 (2008): 1536.
Sun, Y., Y. C Kwok, and N. T Nguyen. “A circular ferrofluid driven microchip for rapid polymerase chain reaction.” Lab on a Chip 7 (2007): 1012.
Tang, Jing, and Patrick S Doyle. “Electrophoretic stretching of DNA molecules using microscale T junctions.” Applied Physics Letters 90 (2007): 224103.
Tegenfeldt, Jonas O, Christelle Prinz, Han Cao, Steven Chou, Walter W Reisner, Robert Riehn, Yan Mei Wang, et al. “The dynamics of genomic-length DNA molecules in 100-nm channels.” Sciences-New York 101 (2004).
Teh, Shia-Yen, Robert Lin, Lung-Hsin Hung, and Abraham P Lee. “Droplet microfluidics.” Lab on a Chip 8 (2008): 198.
“The shape of a exible polymer in a cylindrical pore G. Morrison:” 1–8.
Toepke, Michael W, Vinay V Abhyankar, and David J Beebe. “Microfluidic logic gates and timers.” Lab on a Chip 7 (2007): 1449.
Verma, R., A. Sharma, I. Banerjee, and K. Kargupta. “Spinodal instability and pattern formation in thin liquid films confined between two plates.” Journal of Colloid and Interface Science 296 (April 2006): 220–232.
Wagner, Frederik. “Polymers in Con ned Geometry” (2004).
Wang, Wei, Zhi-Xin Li, Rong Luo, Shu-Hai Lü, Ai-Dong Xu, and Yong-Jun Yang. “Droplet-based micro oscillating-flow PCR chip.” Journal of Micromechanics and Microengineering 15 (August 2005): 1369–1377.
Ward, Jennifer H, Rashid Bashir, and Nicholas A Peppas. “Micropatterning of biomedical polymer surfaces by novel UV polymerization techniques.” Biomedical Engineering (2001).
Watanabe, M. “Microchannels Constructed on Rough Hydrophobic Surfaces.” Chemical Engineering & Technology 31 (August 2008): 1196–1200.
---. “Refreshable microfluidic channels constructed using an inkjet printer.” Sensors and Actuators B: Chemical 122 (March 2007): 141–147.
Watanabe, Masashi. “Construction of refreshable microfluidic channels and electrophoresis along them.” Sensors and Actuators B: Chemical 114 (March 2006): 296–300.
Wei, P., and C. Hsiao. “Microbubble or pendant drop control described by a general phase diagram.” International Journal of Heat and Mass Transfer 52 (February 2009): 1304–1312.
Whitesides, George M. “Fabrication inside Microchannels Using Fluid Flow.” Accounts of Chemical Research 33 (2000): 841–847.
Wilson, Clyde F, Garth J Simpson, Daniel T Chiu, Anette Strömberg, Owe Orwar, Nestor Rodriguez, and Richard N Zare. “Nanoengineered Structures for Holding and Manipulating Liposomes and Cells.” Analytical Chemistry 73 (February 2001): 787–791.
Wixforth, Achim. “FLAT FLUIDICS: ACOUSTICALLY DRIVEN PLANAR MICROFLUIDIC DEVlCES FOR BIOLOGICAL” (2005): 2–5.
Xiao, Sufang, Xuemin Lu, and Qinghua Lu. “Photosensitive Polymer from Ionic Self-Assembly of Azobenzene Dye and Poly(ionic liquid) and Its Alignment Characteristic toward Liquid Crystal Molecules.” Macromolecules 40 (October 2007): 7944–7950.
Xia, Younan, Enoch Kim, and George M Whitesides. “Micromolding of Polymers in Capillaries: Applications in Microfabrication.” Chemistry of Materials 8 (January 1996): 1558–1567.
Xu, J. H, S. W Li, J. Tan, and G. S Luo. “Correlations of droplet formation in T-junction microfluidic devices: from squeezing to dripping.” Microfluidics and Nanofluidics 5 (December 2008): 711–717.
Yamada, Masumi, Vivi Kasim, Megumi Nakashima, Jun'ichi Edahiro, and Minoru Seki. “Continuous cell partitioning using an aqueous two-phase flow system in microfluidic devices.” Biotechnology and Bioengineering 88 (November 2004): 489–494.
Yamada, Masumi, Megumi Nakashima, and Minoru Seki. “Pinched Flow Fractionation: Continuous Size Separation of Particles Utilizing a Laminar Flow Profile in a Pinched Microchannel.” Analytical Chemistry 76 (September 2004): 5465–5471.
Yamada, Masumi, and Minoru Seki. “Hydrodynamic filtration for on-chip particle concentration and classification utilizing microfluidics.” Lab on a Chip 5 (2005): 1233.
---. “Microfluidic Particle Sorter Employing Flow Splitting and Recombining.” Analytical Chemistry 78 (February 2006): 1357–1362.
Yang, Jing-tang, Julia C Chen, Ker-jer Huang, and J Andrew Yeh. “Droplet Manipulation on a Hydrophobic Textured Surface With Roughened Patterns.” Journal Of Microelectromechanical Systems 15 (2006): 697–707.
Zeira, Assaf, Devasish Chowdhury, Rivka Maoz, and Jacob Sagiv. “Contact Electrochemical Replication of Hydrophilic؊Hydrophobic Monolayer Patterns” XXX (2008).
Zhai, Lei, Michael C Berg, Fevzi Ç Cebeci, Yushan Kim, John M Milwid, Michael F Rubner, and Robert E Cohen. “Patterned Superhydrophobic Surfaces: Toward a Synthetic Mimic of the Namib Desert Beetle.” Nano Letters 6 (June 2006): 1213–1217.
Zhang, C., and D. Xing. “Miniaturized PCR chips for nucleic acid amplification and analysis: latest advances and future trends.” Nucleic Acids Research 35 (June 2007): 4223–4237.
Zhang, Jinlong, Qiuquan Guo, Mei Liu, and Jun Yang. “A lab-on-CD prototype for high-speed blood separation.” Journal of Micromechanics and Microengineering 18 (December 2008): 125025.
Zhang, Z., G. Perozziello, P. Boccazzi, A. Sinskey, O. Geschke, and K. Jensen. “Microbioreactors for Bioprocess Development.” Journal of the Association for Laboratory Automation 12 (June 2007): 143–151.
Zheng, Yizhe, Wen Dai, and Hongkai Wu. “A screw-actuated pneumatic valve for portable, disposable microfluidics.” Lab on a Chip 9 (2009): 469.
Zhou, Chunfeng, Pengtao Yue, and James J Feng. “Formation of simple and compound drops in microfluidic devices.” Physics of Fluids 18 (2006): 092105.