From: Ron Kean (ronkean@juno.com)
Date: Tue May 04 1999 - 08:57:03 MDT
On Tue, 04 May 1999 09:08:09 -0400 "Michael S. Lorrey" <mike@lorrey.com>
writes:
Some iron oxides are
>ferromagnetic, others are not. I'm not sure the proper molecule for
>the ferromagentic types, but once extra oxygen gets added on, its
>toast. The precious metals apparently are alloyed or compounded with
>the ferrous oxide and aids stability. I'll check on this, but I do
>know that while standard old tapes will usually develop bad blocks
>near the beginning of the tapes (closest to the outside environment),
>the gold, platinum, and silver tapes tend to remain error free unless
>they've been misused. They also read and write much faster (fewer
>rewrites) than standard tapes. The other day I used a silver tape
>dated 1963 and it read and wrote cleanly.
>
>Mike Lorrey
>
>
Thanks for the elaboration. Whereas most audio tapes, the kind I was
thinking of, are so-called 'normal bias' or 'Type I' tapes, and use an
iron compound, there are also so-called 'high bias' or 'Type II' audio
tapes which use chromium dioxide, and they are sometimes called 'metal
tapes'. I checked one reference book which indicated that floppy
diskettes are coated with ferrite, and that modern hard disks are
aluminum, covered with a thin (0.05 to 0.2 micron) layer of cobalt, which
holds the data, topped by a thin layer of graphite.
Ron Kean
.
.
.
.
.
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
This archive was generated by hypermail 2.1.5 : Fri Nov 01 2002 - 15:03:40 MST