#ifndef THERMISTORTABLE_H_
#define THERMISTORTABLE_H_

// Uncomment the next line if you are using a thermistor; leave it if you have a thermocouple
//#define USE_THERMISTOR

// How many temperature samples to take.  each sample takes about 100 usecs.
#define TEMPERATURE_SAMPLES 3

// How accurately do we maintain the temperature?
#define HALF_DEAD_ZONE 5

// Thermistor lookup table for RepRap Temperature Sensor Boards (http://make.rrrf.org/ts)
// See this page:  for details of what goes in this table.
// Made with createTemperatureLookup.py (http://svn.reprap.org/trunk/reprap/firmware/Arduino/utilities/createTemperatureLookup.py)
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=4066 --max-adc=1023
// r0: 100000
// t0: 25
// r1: 0
// r2: 4700
// beta: 4066
// max adc: 1023
#ifdef USE_THERMISTOR
#define NUMTEMPS 20
short temptable[NUMTEMPS][2] = {
   {1, 841},
   {54, 255},
   {107, 209},
   {160, 184},
   {213, 166},
   {266, 153},
   {319, 142},
   {372, 132},
   {425, 124},
   {478, 116},
   {531, 108},
   {584, 101},
   {637, 93},
   {690, 86},
   {743, 78},
   {796, 70},
   {849, 61},
   {902, 50},
   {955, 34},
   {1008, 3}
};
#endif
#endif