Received-SPF: pass (sog-mx-2.v43.ch3.sourceforge.com: domain of petertodd.org
	designates 62.13.149.43 as permitted sender)
	client-ip=62.13.149.43; envelope-from=pete@petertodd.org;
	helo=outmail149043.authsmtp.co.uk; 
Date: Mon, 6 Jan 2014 07:03:38 -0500
From: Peter Todd <pete@petertodd.org>
To: bitcoin-development@lists.sourceforge.net
Message-ID: <20140106120338.GA14918@savin>
MIME-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha256;
	protocol="application/pgp-signature"; boundary="7AUc2qLy4jB3hD7Z"
Content-Disposition: inline
User-Agent: Mutt/1.5.21 (2010-09-15)
Subject: [Bitcoin-development] Stealth Addresses
Precedence: list


--7AUc2qLy4jB3hD7Z
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

* Abstract

A Stealth Address is a new type of Bitcoin address and related
scriptPubKey/transaction generation scheme that allowers payees to
publish a single, fixed, address that payors can send funds efficiently,
privately, reliably and non-interactively. Payors do not learn what
other payments have been made to the stealth address, and third-parties
learn nothing at all. (both subject to an adjustable anonymity set)


* Acknowledgments

Credit goes to ByteCoin for the original idea.(1) Gregory Maxwell, Adam
Back, and others on #bitcoin-wizards contributed valuable input on the
implementation. Finally thanks goes to Amir Taaki for input on the
general idea of stealth addresses and use-cases.


* Background

Viewed generally a Bitcoin address is a mechanism by which a payee
instructs a payor to create a transaction such that the payee can spend
one or more of the transaction outputs. Of course, typically the address
is simply the hash of a pubkey, and the mechanism by which the funds are
made available to the payee is to simply create a scriptPubKey of the
following form:

    DUP HASH160 <pubKeyHash> EQUALVERIFY CHECKSIG

The problem however is address reuse: it is convenient for payees to
give one or more payor a single address and use it multiple times for
various purposes. This results in all those payments becoming trivially
linkable to each other by an attacker - a threat not only to the privacy
of the user, but also to all users of Bitcoin.(2)

BIP32 hierarchical deterministic wallets are frequently proposed as a
solution. Now an address is a chain code and the mechanism by which a
scriptPubKey is generated is to derive a one-time-use pubkey from that
chain code and some index i. However, this quickly runs into two main
problems:

1) Lack of privacy: While someone not in possession of the address can't
   link payments together, someone who is can.

2) State: If the index is not to be re-used wallets must either maintain
   per-address state, or somehow query for already used indexes, or
   somehow generate them in a sufficiently small range that the payee
   can recover the indexes. All these solutions are problematic.

A good example of where the BIP32-derivation solutions fails come up at
the Dark Wallet Hackathon where it was suggested by the author that for
the purpose of securing person-to-person payments OpenPGP public keys
and X.509 certificates be extended with a new user-id field containing a
Bitcoin address. Wallet software could then use either certificate
system to ensure funds were being sent to the intended recipients -
essentially a non-interactive way of solving what the BIP70 payment
protocol solves interactively. Of course, without stealth addresses the
scheme would likely have little or no privacy.


* Requirements

1) Generated scriptPubKey must be globally unique

2) Must be only spendable by payee

3) scriptPubKey and associated transaction must be indistinguishable to
   third-parties from other transactions in some anonymity set.

4) Method must be fully deterministic and funds recoverable from a
   wallet seed and blockchain data for both payee and payor.

5) Funds must be efficiently recoverable by payee with reasonable, and
   configurable, computation and bandwidth costs.

6) Must be compatible with CoinJoin/Must not leak information to payee
   about what txins were used to pay them.

7) Must be compatible with multisig-protected wallets.

8) Must not make assumptions about txin scriptSig form.

9) Must be possible to prove to third parties that payment was made in
   accordance to instructions without revealing any other information.


** Payment Reliability

Schemes for making payments by transmitting nonces to the recipient
through some other medium, such as Bitmessage, were discussed at the
Dark Wallet Hackathon. However using any medium but the blockchain
itself for the communication means that the reliability of the payment
getting to the recipient is less than that of a standard transaction.
For instance Bitmessage nodes only keep messages for two weeks. We
decided that anything less than reliable atomic transactions was
unacceptable.


* Applying encryption to payments, simple explanation

Using Elliptic curve Diffie-Hellman (ECDH) we can generate a shared
secret that the payee can use to recover their funds. Let the payee have
keypair Q=3DdG. The payor generates nonce keypair P=3DeG and uses ECDH to
arrive at shared secret c=3DH(eQ)=3DH(dP). This secret could be used to
derive a ECC secret key, and from that a scriptPubKey, however that
would allow both payor and payee the ability to spend the funds. So
instead we use BIP32-style derivation to create Q'=3D(Q+c)G and associated
scriptPubKey.

As for the nonce keypair, that is included in the transaction in an
additional zero-valued output:

    RETURN <P>

The payee recovers the funds by scanning the blockchain for candiate P's
in transactions, regenerating the scriptPubKey, and finally checking if
any txouts in the transactions match. Note the close similarity of this
technique to how the Bitmessage network functions - an initial
implementation of the idea will find the Bitmessage code a suitable
starting point.


* Trading off anonymity set size for decreased bandwidth/CPU

By taking advantage of prefix filters(3) we can choose a tradeoff
between anonymity set size and bandwidth/CPU usage if the payee
specifies that payments to them are to match some short prefix k. There
are a few possibilities for how the prefix is to the applied - the most
simple is if per-block indexes of scriptPubKeys are available:

    RETURN <k> <P>

Alternatively if per-block indexes of H(scriptPubKeys) are only
available the wallet software can grind the scriptPubKey with nonce i
until it matches the specified prefix:

    RETURN <i> <P>

Furthermore as symmetric ciphers are quite cheap we might as well hide
the purpose of the OP_RETURN txout and encrypt the pubkey P using H(Q)
as a symmetric key. This gives us a slightly larger anonymity set.


* Advantages of using a separate output

An alternative would be to either re-use a pubkey or signature nonce
value from a transaction input, saving about 45 bytes per txout. An
absolute minimum sized Bitcoin transaction is 166 bytes(4) so at best we
have a 27% savings in tx fees, and more typically around ~15%. (modulo
mass-payments from a single txin)

However using an explicit prunable OP_RETURN output to store the pubkey
rather than re-using one from a txin or txin signature has a number of
advantages:

1) The txin's owned by the payor are not revealed to the payee. In fact,
   they could be held by a third-party who simply makes a transaction
   with the appropriate txouts on behalf of the payee.

2) Less information about the txouts is leaked. The statistical
   distribution of txouts remains unchanged - not possible in re-use
   schemes because they need to grind the payee scriptPubKey's for the
   sake of the prefix filters.

3) If required the nonce secret can be revealed to prove that a payment
   was made to a third-party, e.g. for dispute resolution.


* Bare CHECK(MULTI)SIG output alternative

An alternative with better efficiency could be to use bare
OP_CHECK(MULTI)SIG outputs to hold the nonce pubkey - generally a second
output is needed anyway for change. The most simple would be to use Jeff
Garzik's OP_DROP proposal(5) for the prefix:

  <prefix> DROP n <pubkey>...<pubkey> m CHECKMULTISIG

  or

  <prefix> DROP <pubkey> CHECKSIG

The payor pubkey is in the *change* txout, and the payee's ECDH-derived
pubkey in the other txout. By setting the prefix to be the same on both
txouts and using the same basic scriptPubKey form the relationship of
change and payment is still hidden; CoinJoin-using implementations can
adopt even more sophisticated approaches.

If IsStandard() rules remain the same and using OP_DROP is impractical,
we can also grind the change pubkey to match the prefix in a
deterministic manner so the wallet can still be recovered from a seed.
More costly, but maybe still acceptable for reasonably short prefixes.
Either way the result is transactions that are actually smaller and
cheaper than standard transactions, although without the advantage of
pushing scriptPubKey size payment to the receiver. (a pity we didn't
spend the extra time to adopt OP_EVAL)

A disadvantage is that revealing the nonce secret to prove a payment was
made is more problematic - either the txout needs to be spent first, or
we need a CHECKMULTISIG.


* Address format

To be decided. To support mulisig we probably want the ability to
specify n-of-m master pubkeys, using the nonce to generate derived ones.
For the single pubkey case the addresses will be a little longer than
standard Bitcoin addresses:

  s9KND3vfXjs3YqfZp86Acce3bM7Mhuptwh6mjeDnThsDei9Z2ZZcU

  vs.

  1LZn91ynrA6BCmoUKwnV3Ygk4FQMfPxLbg


1) ByteCoin, Untraceable transactions which can contain a secure message
   are inevitable, https://bitcointalk.org/index.php?topic=3D5965.0

2) Gregory Maxwell, Dark Wallet Certification discussions, also
   http://snowdenandthefuture.info/PartIII.html

3) Peter Todd, [Bitcoin-development] Privacy and blockchain data,
   http://www.mail-archive.com/bitcoin-development@lists.sourceforge.net/ms=
g03612.html

4) Bitcoin Wiki, Maximum transaction rate,
   https://en.bitcoin.it/w/index.php?title=3DMaximum_transaction_rate&oldid=
=3D36983

5) Jeff Garzik, Add small-data OP_DROP transactions as standard
   transactions, https://github.com/bitcoin/bitcoin/pull/1809

--=20
'peter'[:-1]@petertodd.org
0000000000000002861ee0919fc86990573ac360820766dc1b9ba580e5ccf7b6

--7AUc2qLy4jB3hD7Z
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: Digital signature

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
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==
=Z5tP
-----END PGP SIGNATURE-----

--7AUc2qLy4jB3hD7Z--