-- File:        StepShape.cdl
-- Created:     Fri Dec  1 11:11:09 1995
-- Author:      EXPRESS->CDL V0.2 Translator
-- Copyright:   Matra-Datavision 1993




package StepShape 

    ---Purpose: Collects definitions of STEP topological entities 
    --          from Part 42 of ISO10303 (topology_schema)

uses


	TCollection, TColStd, StepData, Interface, MMgt,
	StepBasic, StepRepr, StepGeom

is



enumeration BooleanOperator is

	boDifference,
	boIntersection,
	boUnion
end;


class BooleanOperand;		-- Select Type for

	-- SolidModel
	-- HalfSpaceSolid
	-- CsgPrimitive
	-- BooleanResult


class CsgPrimitive;		-- Select Type for

	-- Sphere
	-- Block
	-- RightAngularWedge
	-- Torus
	-- RightCircularCone
	-- RightCircularCylinder


class CsgSelect;		-- Select Type for

	-- BooleanResult
	-- CsgPrimitive

class GeometricSetSelect;		-- Select Type for

	-- Point
	-- Curve
	-- Surface


class ReversibleTopologyItem;		-- Select Type for

	-- Edge
	-- Path
	-- Face
	-- FaceBound
	-- ClosedShell
	-- OpenShell


class Shell;		-- Select Type for

	-- OpenShell
	-- ClosedShell


class SurfaceModel;		-- Select Type for

	-- ShellBasedSurfaceModel
	-- FaceBasedSurfaceModel


--class Protocol;


class BoxDomain;
--class PropertyDefinitionRepresentation;
    class ShapeDefinitionRepresentation;
--class Representation;
	class ShapeRepresentation;
		class AdvancedBrepShapeRepresentation;
		class CsgShapeRepresentation;
		class FacetedBrepShapeRepresentation;
		class GeometricallyBoundedSurfaceShapeRepresentation;
		class GeometricallyBoundedWireframeShapeRepresentation;
		class ManifoldSurfaceShapeRepresentation;
    	    	class NonManifoldSurfaceShapeRepresentation;
		class TransitionalShapeRepresentation;
		class CompoundShapeRepresentation;
		class EdgeBasedWireframeShapeRepresentation;
		class ConnectedFaceShapeRepresentation;
--class RepresentationItem;
--	class GeometricRepresentationItem;
		class Block;
		class BooleanResult;
		class GeometricSet;
			class GeometricCurveSet;
		class HalfSpaceSolid;
			class BoxedHalfSpace;
		class ConnectedEdgeSet;
-- Removed from Rev2 to Rev4 :		class OneDirectionRepeatFactor;
-- Removed from Rev2 to Rev4 :			class TwoDirectionRepeatFactor;
		class RightAngularWedge;
		class RightCircularCone;
		class RightCircularCylinder;
		class ShellBasedSurfaceModel;
		class EdgeBasedWireframeModel;
		class FaceBasedSurfaceModel;
		class SolidModel;
			class CsgSolid;
			class ManifoldSolidBrep;
				class BrepWithVoids;
				class FacetedBrep;
				class FacetedBrepAndBrepWithVoids; 
    	    	    	    	-- Added by FMA (oublie ANDOR dans SCHEMA)
			class SolidReplica;
			class SweptAreaSolid;
				class ExtrudedAreaSolid;
				class RevolvedAreaSolid;
				
				--Added from CC2 to DIS
			
    	    	    	class SweptFaceSolid;
			    	class ExtrudedFaceSolid;
				class RevolvedFaceSolid;
		class Sphere;
		class Torus;
	class DefinitionalRepresentationAndShapeRepresentation; -- abv CAX-IF TRJ4 k1_geo-ac
	class TopologicalRepresentationItem;
		class ConnectedFaceSet;
			class ClosedShell;
				class OrientedClosedShell;
			class OpenShell;
				class OrientedOpenShell;
			class ConnectedFaceSubSet;--  Added from AP214 DIS to IS 4.01.2002
		class Edge;
			class EdgeCurve;
			class OrientedEdge;
			class Subedge;--  Added from AP214 DIS to IS 4.01.2002
			class SeamEdge;--  Added from AP214 DIS to IS 4.01.2002
		class Face;
			class FaceSurface;
				class AdvancedFace;
			class OrientedFace;
			class Subface;--  Added from AP214 DIS to IS 4.01.2002
		class FaceBound;
			class FaceOuterBound;
		class Loop;
			class EdgeLoop;
			class PolyLoop;
			class VertexLoop;
		class Path;
			class OrientedPath;
		class Vertex;
			class VertexPoint;
		class LoopAndPath;

    --  Added from AP214 CC1 to CC2

    --- added for TR12J (GD&T)    
    class ShapeRepresentationWithParameters; -- inherits ShapeRepresentation
    

class ContextDependentShapeRepresentation;

class Array1OfOrientedClosedShell instantiates Array1 from TCollection (OrientedClosedShell);
class HArray1OfOrientedClosedShell instantiates HArray1 from TCollection (OrientedClosedShell,Array1OfOrientedClosedShell from StepShape);

class Array1OfEdge instantiates Array1 from TCollection (Edge);
class HArray1OfEdge instantiates HArray1 from TCollection (Edge,Array1OfEdge from StepShape);

class Array1OfFace instantiates Array1 from TCollection (Face);
class HArray1OfFace instantiates HArray1 from TCollection (Face,Array1OfFace from StepShape);

class Array1OfFaceBound instantiates Array1 from TCollection (FaceBound);
class HArray1OfFaceBound instantiates HArray1 from TCollection (FaceBound,Array1OfFaceBound from StepShape);

class Array1OfConnectedEdgeSet instantiates Array1 from TCollection (ConnectedEdgeSet);
class HArray1OfConnectedEdgeSet instantiates HArray1 from TCollection (ConnectedEdgeSet,Array1OfConnectedEdgeSet from StepShape);

class Array1OfConnectedFaceSet instantiates Array1 from TCollection (ConnectedFaceSet);
class HArray1OfConnectedFaceSet instantiates HArray1 from TCollection (ConnectedFaceSet,Array1OfConnectedFaceSet from StepShape);

class Array1OfGeometricSetSelect instantiates Array1 from TCollection (GeometricSetSelect);
class HArray1OfGeometricSetSelect instantiates HArray1 from TCollection (GeometricSetSelect,Array1OfGeometricSetSelect from StepShape);

class Array1OfOrientedEdge instantiates Array1 from TCollection (OrientedEdge);
class HArray1OfOrientedEdge instantiates HArray1 from TCollection (OrientedEdge,Array1OfOrientedEdge from StepShape);

class Array1OfShell instantiates Array1 from TCollection (Shell);
class HArray1OfShell instantiates HArray1 from TCollection (Shell,Array1OfShell from StepShape);

    -- ABV 18 Apr 00: for dimensions and tolerances (Part 47)
    enumeration AngleRelator is 
	Equal,
	Large,
	Small
    end;
    class DimensionalCharacteristic;
    class AngularLocation;
    class AngularSize;
    class DimensionalCharacteristicRepresentation;
    class DimensionalLocation;
    class DirectedDimensionalLocation;
    class DimensionalLocationWithPath;
    class DimensionalSize;
    class DimensionalSizeWithPath;
    class ShapeDimensionRepresentation;

    -- CKY 24 Apr 2001 : for dimensions and tolerances , continued (TR7J)
    class LimitsAndFits;
    class ToleranceValue;
    class MeasureQualification;
    class PlusMinusTolerance;
    class PrecisionQualifier;
    class TypeQualifier;

    class ValueQualifier;
    class ToleranceMethodDefinition;

    class QualifiedRepresentationItem;
    class MeasureRepresentationItemAndQualifiedRepresentationItem;

    class Array1OfValueQualifier  instantiates Array1 from TCollection (ValueQualifier);
    class HArray1OfValueQualifier instantiates HArray1 from TCollection 
    	(ValueQualifier,Array1OfValueQualifier);

--added for AP209

    class PointRepresentation;

--	Protocol returns Protocol from StepShape;
	---Purpose : creates a Protocol

end StepShape;