-- File: Geom_BSplineCurve.cdl -- Created: Tue Mar 9 19:30:09 1993 -- Author: JCV -- -- Copyright: Matra Datavision 1993 -- xab : modified 15-Mar-95 : added cache mecanism to speed up evaluation -- mei : modified 08-Jun-95 : added method MovePoint class BSplineCurve from Geom inherits BoundedCurve from Geom ---Purpose : Definition of the B_spline curve. -- A B-spline curve can be -- Uniform or non-uniform -- Rational or non-rational -- Periodic or non-periodic -- -- a b-spline curve is defined by : -- its degree; the degree for a -- Geom_BSplineCurve is limited to a value (25) -- which is defined and controlled by the system. -- This value is returned by the function MaxDegree; -- - its periodic or non-periodic nature; -- - a table of poles (also called control points), with -- their associated weights if the BSpline curve is -- rational. The poles of the curve are "control -- points" used to deform the curve. If the curve is -- non-periodic, the first pole is the start point of -- the curve, and the last pole is the end point of -- the curve. The segment which joins the first pole -- to the second pole is the tangent to the curve at -- its start point, and the segment which joins the -- last pole to the second-from-last pole is the -- tangent to the curve at its end point. If the curve -- is periodic, these geometric properties are not -- verified. It is more difficult to give a geometric -- signification to the weights but are useful for -- providing exact representations of the arcs of a -- circle or ellipse. Moreover, if the weights of all the -- poles are equal, the curve has a polynomial -- equation; it is therefore a non-rational curve. -- - a table of knots with their multiplicities. For a -- Geom_BSplineCurve, the table of knots is an -- increasing sequence of reals without repetition; -- the multiplicities define the repetition of the knots. -- A BSpline curve is a piecewise polynomial or -- rational curve. The knots are the parameters of -- junction points between two pieces. The -- multiplicity Mult(i) of the knot Knot(i) of -- the BSpline curve is related to the degree of -- continuity of the curve at the knot Knot(i), -- which is equal to Degree - Mult(i) -- where Degree is the degree of the BSpline curve. -- If the knots are regularly spaced (i.e. the difference -- between two consecutive knots is a constant), three -- specific and frequently used cases of knot -- distribution can be identified: -- - "uniform" if all multiplicities are equal to 1, -- - "quasi-uniform" if all multiplicities are equal to 1, -- except the first and the last knot which have a -- multiplicity of Degree + 1, where Degree is -- the degree of the BSpline curve, -- - "Piecewise Bezier" if all multiplicities are equal to -- Degree except the first and last knot which -- have a multiplicity of Degree + 1, where -- Degree is the degree of the BSpline curve. A -- curve of this type is a concatenation of arcs of Bezier curves. -- If the BSpline curve is not periodic: -- - the bounds of the Poles and Weights tables are 1 -- and NbPoles, where NbPoles is the number -- of poles of the BSpline curve, -- - the bounds of the Knots and Multiplicities tables -- are 1 and NbKnots, where NbKnots is the -- number of knots of the BSpline curve. -- If the BSpline curve is periodic, and if there are k -- periodic knots and p periodic poles, the period is: -- period = Knot(k + 1) - Knot(1) -- and the poles and knots tables can be considered -- as infinite tables, verifying: -- - Knot(i+k) = Knot(i) + period -- - Pole(i+p) = Pole(i) -- Note: data structures of a periodic BSpline curve -- are more complex than those of a non-periodic one. -- Warning -- In this class, weight value is considered to be zero if -- the weight is less than or equal to gp::Resolution(). -- -- References : -- . A survey of curve and surface methods in CADG Wolfgang BOHM -- CAGD 1 (1984) -- . On de Boor-like algorithms and blossoming Wolfgang BOEHM -- cagd 5 (1988) -- . Blossoming and knot insertion algorithms for B-spline curves -- Ronald N. GOLDMAN -- . Modelisation des surfaces en CAO, Henri GIAUME Peugeot SA -- . Curves and Surfaces for Computer Aided Geometric Design, -- a practical guide Gerald Farin uses Array1OfInteger from TColStd, Array1OfReal from TColStd, HArray1OfInteger from TColStd, HArray1OfReal from TColStd, Array1OfPnt from TColgp, Ax1 from gp, Ax2 from gp, Pnt from gp, HArray1OfPnt from TColgp, Trsf from gp, Vec from gp, BSplKnotDistribution from GeomAbs, Geometry from Geom, Shape from GeomAbs raises ConstructionError from Standard, DimensionError from Standard, DomainError from Standard, OutOfRange from Standard, RangeError from Standard, NoSuchObject from Standard, UndefinedDerivative from Geom is Create (Poles : Array1OfPnt from TColgp; Knots : Array1OfReal from TColStd; Multiplicities : Array1OfInteger from TColStd; Degree : Integer; Periodic : Boolean = Standard_False) returns mutable BSplineCurve from Geom ---Purpose : Creates a non-rational B_spline curve on the -- basis of degree . raises ConstructionError; -- The following conditions must be verified. -- 0 < Degree <= MaxDegree. -- -- Knots.Length() == Mults.Length() >= 2 -- -- Knots(i) < Knots(i+1) (Knots are increasing) -- -- 1 <= Mults(i) <= Degree -- -- On a non periodic curve the first and last multiplicities -- may be Degree+1 (this is even recommanded if you want the -- curve to start and finish on the first and last pole). -- -- On a periodic curve the first and the last multicities -- must be the same. -- -- on non-periodic curves -- -- Poles.Length() == Sum(Mults(i)) - Degree - 1 >= 2 -- -- on periodic curves -- -- Poles.Length() == Sum(Mults(i)) except the first or last Create (Poles : Array1OfPnt from TColgp; Weights : Array1OfReal from TColStd; Knots : Array1OfReal from TColStd; Multiplicities : Array1OfInteger from TColStd; Degree : Integer; Periodic : Boolean = Standard_False; CheckRational : Boolean = Standard_True) returns mutable BSplineCurve from Geom ---Purpose : Creates a rational B_spline curve on the basis -- of degree . -- Raises ConstructionError subject to the following conditions -- 0 < Degree <= MaxDegree. -- -- Weights.Length() == Poles.Length() -- -- Knots.Length() == Mults.Length() >= 2 -- -- Knots(i) < Knots(i+1) (Knots are increasing) -- -- 1 <= Mults(i) <= Degree -- -- On a non periodic curve the first and last multiplicities -- may be Degree+1 (this is even recommanded if you want the -- curve to start and finish on the first and last pole). -- -- On a periodic curve the first and the last multicities -- must be the same. -- -- on non-periodic curves -- -- Poles.Length() == Sum(Mults(i)) - Degree - 1 >= 2 -- -- on periodic curves -- -- Poles.Length() == Sum(Mults(i)) except the first or last raises ConstructionError; IncreaseDegree (me : mutable; Degree : Integer) ---Purpose: Increases the degree of this BSpline curve to -- Degree. As a result, the poles, weights and -- multiplicities tables are modified; the knots table is -- not changed. Nothing is done if Degree is less than -- or equal to the current degree. -- Exceptions -- Standard_ConstructionError if Degree is greater than -- Geom_BSplineCurve::MaxDegree(). raises ConstructionError; IncreaseMultiplicity (me : mutable; Index : Integer; M : Integer) ---Purpose :Increases the multiplicity of the knot to -- . -- -- If is lower or equal to the current -- multiplicity nothing is done. If is higher than -- the degree the degree is used. raises OutOfRange; ---Purpose: If is not in [FirstUKnotIndex, LastUKnotIndex] IncreaseMultiplicity (me : mutable; I1, I2 : Integer; M : Integer) ---Purpose :Increases the multiplicities of the knots in -- [I1,I2] to . -- -- For each knot if is lower or equal to the -- current multiplicity nothing is done. If is -- higher than the degree the degree is used. raises OutOfRange; ---Purpose: If are not in [FirstUKnotIndex, LastUKnotIndex] IncrementMultiplicity (me : mutable; I1, I2 : Integer; M : Integer) ---Purpose :Increment the multiplicities of the knots in -- [I1,I2] by . -- -- If is not positive nithing is done. -- -- For each knot the resulting multiplicity is -- limited to the Degree. raises OutOfRange; ---Purpose: If are not in [FirstUKnotIndex, LastUKnotIndex] InsertKnot (me : mutable; U : Real; M : Integer = 1; ParametricTolerance : Real = 0.0; Add : Boolean = Standard_True); ---Purpose: Inserts a knot value in the sequence of knots. If -- is an existing knot the multiplicity is -- increased by . -- -- If U is not on the parameter range nothing is -- done. -- -- If the multiplicity is negative or null nothing is -- done. The new multiplicity is limited to the -- degree. -- -- The tolerance criterion for knots equality is -- the max of Epsilon(U) and ParametricTolerance. InsertKnots (me : mutable; Knots : Array1OfReal from TColStd; Mults : Array1OfInteger from TColStd; ParametricTolerance : Real = 0.0; Add : Boolean = Standard_False); ---Purpose: Inserts a set of knots values in the sequence of -- knots. -- -- For each U = Knots(i), M = Mults(i) -- -- If is an existing knot the multiplicity is -- increased by if is True, increased to -- if is False. -- -- If U is not on the parameter range nothing is -- done. -- -- If the multiplicity is negative or null nothing is -- done. The new multiplicity is limited to the -- degree. -- -- The tolerance criterion for knots equality is -- the max of Epsilon(U) and ParametricTolerance. RemoveKnot(me : mutable; Index : Integer; M : Integer; Tolerance : Real) returns Boolean ---Purpose : Reduces the multiplicity of the knot of index Index -- to M. If M is equal to 0, the knot is removed. -- With a modification of this type, the array of poles is also modified. -- Two different algorithms are systematically used to -- compute the new poles of the curve. If, for each -- pole, the distance between the pole calculated -- using the first algorithm and the same pole -- calculated using the second algorithm, is less than -- Tolerance, this ensures that the curve is not -- modified by more than Tolerance. Under these -- conditions, true is returned; otherwise, false is returned. -- A low tolerance is used to prevent modification of -- the curve. A high tolerance is used to "smooth" the curve. -- Exceptions -- Standard_OutOfRange if Index is outside the -- bounds of the knots table. raises OutOfRange; ---Purpose : pole insertion and pole removing -- this operation is limited to the Uniform or QuasiUniform -- BSplineCurve. The knot values are modified . If the BSpline is -- NonUniform or Piecewise Bezier an exception Construction error -- is raised. Reverse (me : mutable); ---Purpose : -- Changes the direction of parametrization of . The Knot -- sequence is modified, the FirstParameter and the -- LastParameter are not modified. The StartPoint of the -- initial curve becomes the EndPoint of the reversed curve -- and the EndPoint of the initial curve becomes the StartPoint -- of the reversed curve. ReversedParameter(me; U : Real) returns Real; ---Purpose: Returns the parameter on the reversed curve for -- the point of parameter U on . -- -- returns UFirst + ULast - U Segment (me : mutable; U1, U2 : Real) ---Purpose : Modifies this BSpline curve by segmenting it between -- U1 and U2. Either of these values can be outside the -- bounds of the curve, but U2 must be greater than U1. -- All data structure tables of this BSpline curve are -- modified, but the knots located between U1 and U2 -- are retained. The degree of the curve is not modified. -- Warnings : -- Even if is not closed it can become closed after the -- segmentation for example if U1 or U2 are out of the bounds -- of the curve or if the curve makes loop. -- After the segmentation the length of a curve can be null. raises DomainError from Standard; ---Purpose: raises if U2 < U1. SetKnot (me : mutable; Index : Integer; K : Real) ---Purpose : Modifies this BSpline curve by assigning the value K -- to the knot of index Index in the knots table. This is a -- relatively local modification because K must be such that: -- Knots(Index - 1) < K < Knots(Index + 1) -- The second syntax allows you also to increase the -- multiplicity of the knot to M (but it is not possible to -- decrease the multiplicity of the knot with this function). -- Standard_ConstructionError if: -- - K is not such that: -- Knots(Index - 1) < K < Knots(Index + 1) -- - M is greater than the degree of this BSpline curve -- or lower than the previous multiplicity of knot of -- index Index in the knots table. -- Standard_OutOfRange if Index is outside the bounds of the knots table. raises ConstructionError, OutOfRange; SetKnots (me : mutable; K : Array1OfReal from TColStd) ---Purpose : Modifies this BSpline curve by assigning the array -- K to its knots table. The multiplicity of the knots is not modified. -- Exceptions -- Standard_ConstructionError if the values in the -- array K are not in ascending order. -- Standard_OutOfRange if the bounds of the array -- K are not respectively 1 and the number of knots of this BSpline curve. raises ConstructionError, OutOfRange; SetKnot (me : mutable; Index : Integer; K : Real; M : Integer) ---Purpose : -- Changes the knot of range Index with its multiplicity. -- You can increase the multiplicity of a knot but it is -- not allowed to decrease the multiplicity of an existing knot. raises ConstructionError, ---Purpose : -- Raised if K >= Knots(Index+1) or K <= Knots(Index-1). -- Raised if M is greater than Degree or lower than the previous -- multiplicity of knot of range Index. OutOfRange; ---Purpose : Raised if Index < 1 || Index > NbKnots PeriodicNormalization(me ; U : in out Real) ; ---Purpose : returns the parameter normalized within -- the period if the curve is periodic : otherwise -- does not do anything SetPeriodic (me : mutable) ---Purpose : Changes this BSpline curve into a periodic curve. -- To become periodic, the curve must first be closed. -- Next, the knot sequence must be periodic. For this, -- FirstUKnotIndex and LastUKnotIndex are used -- to compute I1 and I2, the indexes in the knots -- array of the knots corresponding to the first and -- last parameters of this BSpline curve. -- The period is therefore: Knots(I2) - Knots(I1). -- Consequently, the knots and poles tables are modified. -- Exceptions -- Standard_ConstructionError if this BSpline curve is not closed. raises ConstructionError; SetOrigin (me : mutable; Index : Integer) ---Purpose: Assigns the knot of index Index in the knots table as -- the origin of this periodic BSpline curve. As a -- consequence, the knots and poles tables are modified. -- Exceptions -- Standard_NoSuchObject if this curve is not periodic. -- Standard_DomainError if Index is outside the bounds of the knots table. raises NoSuchObject, DomainError; SetOrigin (me : mutable; U : Real from Standard; Tol : Real from Standard) ---Purpose: Set the origin of a periodic curve at Knot U. If U -- is not a knot of the BSpline a new knot is -- inseted. KnotVector and poles are modified. raises NoSuchObject; ---Purpose: Raised if the curve is not periodic SetNotPeriodic (me : mutable); ---Purpose : Changes this BSpline curve into a non-periodic -- curve. If this curve is already non-periodic, it is not modified. -- Note: the poles and knots tables are modified. -- Warning -- If this curve is periodic, as the multiplicity of the first -- and last knots is not modified, and is not equal to -- Degree + 1, where Degree is the degree of -- this BSpline curve, the start and end points of the -- curve are not its first and last poles. SetPole (me : mutable; Index : Integer; P : Pnt) ---Purpose : Modifies this BSpline curve by assigning P to the pole -- of index Index in the poles table. -- Exceptions -- Standard_OutOfRange if Index is outside the -- bounds of the poles table. -- Standard_ConstructionError if Weight is negative or null. raises OutOfRange; SetPole (me : mutable; Index : Integer; P : Pnt; Weight : Real) ---Purpose: Modifies this BSpline curve by assigning P to the pole -- of index Index in the poles table. -- This syntax also allows you to modify the -- weight of the modified pole, which becomes Weight. -- In this case, if this BSpline curve is non-rational, it -- can become rational and vice versa. -- Exceptions -- Standard_OutOfRange if Index is outside the -- bounds of the poles table. -- Standard_ConstructionError if Weight is negative or null. raises OutOfRange, ConstructionError; SetWeight (me : mutable; Index : Integer; Weight : Real) ---Purpose : -- Changes the weight for the pole of range Index. -- If the curve was non rational it can become rational. -- If the curve was rational it can become non rational. raises OutOfRange, ---Purpose: -- Raised if Index < 1 || Index > NbPoles ConstructionError; ---Purpose : Raised if Weight <= 0.0 MovePoint (me : mutable; U: Real; P: Pnt; Index1, Index2: Integer; FirstModifiedPole, LastModifiedPole: out Integer) ---Purpose : Moves the point of parameter U of this BSpline curve -- to P. Index1 and Index2 are the indexes in the table -- of poles of this BSpline curve of the first and last -- poles designated to be moved. -- FirstModifiedPole and LastModifiedPole are the -- indexes of the first and last poles which are effectively modified. -- In the event of incompatibility between Index1, Index2 and the value U: -- - no change is made to this BSpline curve, and -- - the FirstModifiedPole and LastModifiedPole are returned null. -- Exceptions -- Standard_OutOfRange if: -- - Index1 is greater than or equal to Index2, or -- - Index1 or Index2 is less than 1 or greater than the -- number of poles of this BSpline curve. raises OutOfRange; MovePointAndTangent (me : mutable; U : Real; P : Pnt; Tangent : Vec ; Tolerance : Real ; StartingCondition, EndingCondition : Integer; ErrorStatus : out Integer) ---Purpose : -- Move a point with parameter U to P. -- and makes it tangent at U be Tangent. -- StartingCondition = -1 means first can move -- EndingCondition = -1 means last point can move -- StartingCondition = 0 means the first point cannot move -- EndingCondition = 0 means the last point cannot move -- StartingCondition = 1 means the first point and tangent cannot move -- EndingCondition = 1 means the last point and tangent cannot move -- and so forth -- ErrorStatus != 0 means that there are not enought degree of freedom -- with the constrain to deform the curve accordingly -- raises OutOfRange; IsCN (me; N : Integer) returns Boolean ---Purpose : -- Returns the continuity of the curve, the curve is at least C0. raises RangeError; ---Purpose : Raised if N < 0. IsClosed (me) returns Boolean; ---Purpose : -- Returns true if the distance between the first point and the -- last point of the curve is lower or equal to Resolution -- from package gp. --- Warnings : -- The first and the last point can be different from the first -- pole and the last pole of the curve. IsPeriodic (me) returns Boolean; ---Purpose : Returns True if the curve is periodic. IsRational (me) returns Boolean; ---Purpose : -- Returns True if the weights are not identical. -- The tolerance criterion is Epsilon of the class Real. IsCacheValid(me; Parameter : Real) returns Boolean ---Purpose : -- Tells whether the Cache is valid for the -- given parameter -- Warnings : the parameter must be normalized within -- the period if the curve is periodic. Otherwise -- the answer will be false -- is static private; Continuity (me) returns Shape from GeomAbs; ---Purpose : -- Returns the global continuity of the curve : -- C0 : only geometric continuity, -- C1 : continuity of the first derivative all along the Curve, -- C2 : continuity of the second derivative all along the Curve, -- C3 : continuity of the third derivative all along the Curve, -- CN : the order of continuity is infinite. -- For a B-spline curve of degree d if a knot Ui has a -- multiplicity p the B-spline curve is only Cd-p continuous -- at Ui. So the global continuity of the curve can't be greater -- than Cd-p where p is the maximum multiplicity of the interior -- Knots. In the interior of a knot span the curve is infinitely -- continuously differentiable. Degree (me) returns Integer; ---Purpose: Returns the degree of this BSpline curve. -- The degree of a Geom_BSplineCurve curve cannot -- be greater than Geom_BSplineCurve::MaxDegree(). ---Purpose : Computation of value and derivatives D0 (me ; U : Real; P : out Pnt); ---Purpose: Returns in P the point of parameter U. D1 (me; U : Real; P : out Pnt; V1 : out Vec) raises UndefinedDerivative; ---Purpose : Raised if the continuity of the curve is not C1. D2 (me; U : Real; P : out Pnt; V1, V2 : out Vec) raises UndefinedDerivative; ---Purpose : Raised if the continuity of the curve is not C2. D3 (me; U : Real; P : out Pnt; V1, V2, V3 : out Vec) raises UndefinedDerivative; ---Purpose : Raised if the continuity of the curve is not C3. DN (me; U : Real; N : Integer) returns Vec ---Purpose : For the point of parameter U of this BSpline curve, -- computes the vector corresponding to the Nth derivative. -- Warning -- On a point where the continuity of the curve is not the -- one requested, this function impacts the part defined -- by the parameter with a value greater than U, i.e. the -- part of the curve to the "right" of the singularity. -- Exceptions -- Standard_RangeError if N is less than 1. raises UndefinedDerivative, RangeError; ---Purpose : -- The following functions compute the point of parameter U -- and the derivatives at this point on the B-spline curve -- arc defined between the knot FromK1 and the knot ToK2. -- U can be out of bounds [Knot (FromK1), Knot (ToK2)] but -- for the computation we only use the definition of the curve -- between these two knots. This method is useful to compute -- local derivative, if the order of continuity of the whole -- curve is not greater enough. Inside the parametric -- domain Knot (FromK1), Knot (ToK2) the evaluations are -- the same as if we consider the whole definition of the -- curve. Of course the evaluations are different outside -- this parametric domain. LocalValue (me; U : Real; FromK1, ToK2 : Integer) returns Pnt raises DomainError, ---Purpose : Raised if FromK1 = ToK2. OutOfRange; ---Purpose : -- Raised if FromK1 and ToK2 are not in the range -- [FirstUKnotIndex, LastUKnotIndex]. LocalD0 (me; U : Real; FromK1, ToK2 : Integer; P : out Pnt) raises DomainError, ---Purpose : Raised if FromK1 = ToK2. OutOfRange; ---Purpose : -- Raised if FromK1 and ToK2 are not in the range -- [FirstUKnotIndex, LastUKnotIndex]. LocalD1 (me; U : Real; FromK1, ToK2 : Integer; P : out Pnt; V1 : out Vec) raises UndefinedDerivative, ---Purpose : -- Raised if the local continuity of the curve is not C1 -- between the knot K1 and the knot K2. DomainError, ---Purpose : Raised if FromK1 = ToK2. OutOfRange; ---Purpose : -- Raised if FromK1 and ToK2 are not in the range -- [FirstUKnotIndex, LastUKnotIndex]. LocalD2 (me; U : Real; FromK1, ToK2 : Integer; P : out Pnt; V1, V2 : out Vec) raises UndefinedDerivative, ---Purpose : -- Raised if the local continuity of the curve is not C2 -- between the knot K1 and the knot K2. DomainError, ---Purpose : Raised if FromK1 = ToK2. OutOfRange; ---Purpose : -- Raised if FromK1 and ToK2 are not in the range -- [FirstUKnotIndex, LastUKnotIndex]. LocalD3 (me; U : Real; FromK1, ToK2 : Integer; P : out Pnt; V1, V2, V3 : out Vec) raises UndefinedDerivative, ---Purpose : -- Raised if the local continuity of the curve is not C3 -- between the knot K1 and the knot K2. DomainError, ---Purpose : Raised if FromK1 = ToK2. OutOfRange; ---Purpose : -- Raised if FromK1 and ToK2 are not in the range -- [FirstUKnotIndex, LastUKnotIndex]. LocalDN (me; U : Real; FromK1, ToK2 : Integer; N : Integer) returns Vec raises UndefinedDerivative, ---Purpose : -- Raised if the local continuity of the curve is not CN -- between the knot K1 and the knot K2. DomainError, ---Purpose : Raised if FromK1 = ToK2. RangeError, ---Purpose : Raised if N < 1. OutOfRange; ---Purpose : -- Raises if FromK1 and ToK2 are not in the range -- [FirstUKnotIndex, LastUKnotIndex]. EndPoint (me) returns Pnt; ---Purpose : -- Returns the last point of the curve. -- Warnings : -- The last point of the curve is different from the last -- pole of the curve if the multiplicity of the last knot -- is lower than Degree. FirstUKnotIndex (me) returns Integer; ---Purpose : Returns the index in the knot array of the knot -- corresponding to the first or last parameter of this BSpline curve. -- For a BSpline curve, the first (or last) parameter -- (which gives the start (or end) point of the curve) is a -- knot value. However, if the multiplicity of the first (or -- last) knot is less than Degree + 1, where -- Degree is the degree of the curve, it is not the first -- (or last) knot of the curve. FirstParameter (me) returns Real; ---Purpose : Returns the value of the first parameter of this -- BSpline curve. This is a knot value. -- The first parameter is the one of the start point of the BSpline curve. Knot (me; Index : Integer) returns Real ---Purpose : -- Returns the knot of range Index. When there is a knot -- with a multiplicity greater than 1 the knot is not repeated. -- The method Multiplicity can be used to get the multiplicity -- of the Knot. raises OutOfRange; ---Purpose : Raised if Index < 1 or Index > NbKnots Knots (me; K : out Array1OfReal from TColStd) ---Purpose : returns the knot values of the B-spline curve; -- Warning -- A knot with a multiplicity greater than 1 is not -- repeated in the knot table. The Multiplicity function -- can be used to obtain the multiplicity of each knot. raises DimensionError; ---Purpose : -- Raised if the length of K is not equal to the number of knots. KnotSequence (me; K : out Array1OfReal from TColStd) ---Purpose : Returns K, the knots sequence of this BSpline curve. -- In this sequence, knots with a multiplicity greater than 1 are repeated. -- In the case of a non-periodic curve the length of the -- sequence must be equal to the sum of the NbKnots -- multiplicities of the knots of the curve (where -- NbKnots is the number of knots of this BSpline -- curve). This sum is also equal to : NbPoles + Degree + 1 -- where NbPoles is the number of poles and -- Degree the degree of this BSpline curve. -- In the case of a periodic curve, if there are k periodic -- knots, the period is Knot(k+1) - Knot(1). -- The initial sequence is built by writing knots 1 to k+1, -- which are repeated according to their corresponding multiplicities. -- If Degree is the degree of the curve, the degree of -- continuity of the curve at the knot of index 1 (or k+1) -- is equal to c = Degree + 1 - Mult(1). c -- knots are then inserted at the beginning and end of -- the initial sequence: -- - the c values of knots preceding the first item -- Knot(k+1) in the initial sequence are inserted -- at the beginning; the period is subtracted from these c values; -- - the c values of knots following the last item -- Knot(1) in the initial sequence are inserted at -- the end; the period is added to these c values. -- The length of the sequence must therefore be equal to: -- NbPoles + 2*Degree - Mult(1) + 2. -- Example -- For a non-periodic BSpline curve of degree 2 where: -- - the array of knots is: { k1 k2 k3 k4 }, -- - with associated multiplicities: { 3 1 2 3 }, -- the knot sequence is: -- K = { k1 k1 k1 k2 k3 k3 k4 k4 k4 } -- For a periodic BSpline curve of degree 4 , which is -- "C1" continuous at the first knot, and where : -- - the periodic knots are: { k1 k2 k3 (k4) } -- (3 periodic knots: the points of parameter k1 and k4 -- are identical, the period is p = k4 - k1), -- - with associated multiplicities: { 3 1 2 (3) }, -- the degree of continuity at knots k1 and k4 is: -- Degree + 1 - Mult(i) = 2. -- 2 supplementary knots are added at the beginning -- and end of the sequence: -- - at the beginning: the 2 knots preceding k4 minus -- the period; in this example, this is k3 - p both times; -- - at the end: the 2 knots following k1 plus the period; -- in this example, this is k2 + p and k3 + p. -- The knot sequence is therefore: -- K = { k3-p k3-p k1 k1 k1 k2 k3 k3 -- k4 k4 k4 k2+p k3+p } -- Exceptions -- Standard_DimensionError if the array K is not of -- the appropriate length.Returns the knots sequence. raises DimensionError; KnotDistribution (me) returns BSplKnotDistribution from GeomAbs; ---Purpose : -- Returns NonUniform or Uniform or QuasiUniform or PiecewiseBezier. -- If all the knots differ by a positive constant from the -- preceding knot the BSpline Curve can be : -- - Uniform if all the knots are of multiplicity 1, -- - QuasiUniform if all the knots are of multiplicity 1 except for -- the first and last knot which are of multiplicity Degree + 1, -- - PiecewiseBezier if the first and last knots have multiplicity -- Degree + 1 and if interior knots have multiplicity Degree -- A piecewise Bezier with only two knots is a BezierCurve. -- else the curve is non uniform. -- The tolerance criterion is Epsilon from class Real. LastUKnotIndex (me) returns Integer; ---Purpose : -- For a BSpline curve the last parameter (which gives the -- end point of the curve) is a knot value but if the -- multiplicity of the last knot index is lower than -- Degree + 1 it is not the last knot of the curve. This -- method computes the index of the knot corresponding to -- the last parameter. LastParameter (me) returns Real; ---Purpose : -- Computes the parametric value of the end point of the curve. -- It is a knot value. LocateU (me; U : Real; ParametricTolerance : Real; I1, I2 : in out Integer; WithKnotRepetition : Boolean = Standard_False); ---Purpose : -- Locates the parametric value U in the sequence of knots. -- If "WithKnotRepetition" is True we consider the knot's -- representation with repetition of multiple knot value, -- otherwise we consider the knot's representation with -- no repetition of multiple knot values. -- Knots (I1) <= U <= Knots (I2) -- . if I1 = I2 U is a knot value (the tolerance criterion -- ParametricTolerance is used). -- . if I1 < 1 => U < Knots (1) - Abs(ParametricTolerance) -- . if I2 > NbKnots => U > Knots (NbKnots) + Abs(ParametricTolerance) Multiplicity (me; Index : Integer) returns Integer ---Purpose : -- Returns the multiplicity of the knots of range Index. raises OutOfRange; ---Purpose : Raised if Index < 1 or Index > NbKnots Multiplicities (me; M : out Array1OfInteger from TColStd) ---Purpose : -- Returns the multiplicity of the knots of the curve. raises DimensionError; ---Purpose : -- Raised if the length of M is not equal to NbKnots. NbKnots (me) returns Integer; ---Purpose : -- Returns the number of knots. This method returns the number of -- knot without repetition of multiple knots. NbPoles (me) returns Integer; ---Purpose : Returns the number of poles Pole (me; Index : Integer) returns Pnt ---Purpose : Returns the pole of range Index. raises OutOfRange; ---Purpose : Raised if Index < 1 or Index > NbPoles. Poles (me; P : out Array1OfPnt from TColgp) ---Purpose : Returns the poles of the B-spline curve; raises DimensionError; ---Purpose : -- Raised if the length of P is not equal to the number of poles. StartPoint (me) returns Pnt; ---Purpose : -- Returns the start point of the curve. -- Warnings : -- This point is different from the first pole of the curve if the -- multiplicity of the first knot is lower than Degree. Weight (me; Index : Integer) returns Real ---Purpose : Returns the weight of the pole of range Index . raises OutOfRange; ---Purpose : Raised if Index < 1 or Index > NbPoles. Weights (me; W : out Array1OfReal from TColStd) ---Purpose : Returns the weights of the B-spline curve; raises DimensionError; ---Purpose : -- Raised if the length of W is not equal to NbPoles. Transform (me : mutable; T : Trsf); ---Purpose: Applies the transformation T to this BSpline curve. MaxDegree (myclass) returns Integer; ---Purpose : -- Returns the value of the maximum degree of the normalized -- B-spline basis functions in this package. Resolution(me : mutable; Tolerance3D : Real; UTolerance : out Real) ---Purpose: Computes for this BSpline curve the parametric -- tolerance UTolerance for a given 3D tolerance Tolerance3D. -- If f(t) is the equation of this BSpline curve, -- UTolerance ensures that: -- | t1 - t0| < Utolerance ===> -- |f(t1) - f(t0)| < Tolerance3D ; Copy (me) returns mutable like me; ---Purpose: Creates a new object which is a copy of this BSpline curve. InvalidateCache(me : mutable) ---Purpose : Invalidates the cache. This has to be private -- this has to be private is static private; UpdateKnots(me : mutable) ---Purpose : Recompute the flatknots, the knotsdistribution, the continuity. is static private; ValidateCache(me : mutable ; Parameter : Real) is static private; ---Purpose : updates the cache and validates it fields rational : Boolean; periodic : Boolean; knotSet : BSplKnotDistribution from GeomAbs; smooth : Shape from GeomAbs; deg : Integer; poles : HArray1OfPnt from TColgp; weights : HArray1OfReal from TColStd; flatknots : HArray1OfReal from TColStd; knots : HArray1OfReal from TColStd; mults : HArray1OfInteger from TColStd; cachepoles : HArray1OfPnt from TColgp; -- Taylor expansion of the poles function, in homogeneous -- form if the curve is rational. The taylor expansion -- is normalized so that the span corresponds to -- [0 1] see below cacheweights : HArray1OfReal from TColStd; -- Taylor expansion of the poles function, in homogeneous -- form if the curve is rational. The taylor expansion -- is normalized so that the span corresponds to -- [0 1] see below validcache : Integer; -- = 1 the cache is valid -- = 0 the cache is invalid parametercache : Real; -- Parameter at which the Taylor expension is stored in -- the cache spanlenghtcache : Real; -- Since the Taylor expansion is normalized in the -- cache to evaluate the cache one has to use -- (Parameter - parametercache) / nspanlenghtcache spanindexcache : Integer; -- the span for which the cache is valid if -- validcache is 1 -- usefull to evaluate the parametric resolution maxderivinv : Real from Standard; maxderivinvok : Boolean from Standard; end;