// This file is generated by WOK (CPPExt). // Please do not edit this file; modify original file instead. // The copyright and license terms as defined for the original file apply to // this header file considered to be the "object code" form of the original source. #ifndef _Geom_BSplineCurve_HeaderFile #define _Geom_BSplineCurve_HeaderFile #ifndef _Standard_HeaderFile #include #endif #ifndef _Standard_DefineHandle_HeaderFile #include #endif #ifndef _Handle_Geom_BSplineCurve_HeaderFile #include #endif #ifndef _Standard_Boolean_HeaderFile #include #endif #ifndef _GeomAbs_BSplKnotDistribution_HeaderFile #include #endif #ifndef _GeomAbs_Shape_HeaderFile #include #endif #ifndef _Standard_Integer_HeaderFile #include #endif #ifndef _Handle_TColgp_HArray1OfPnt_HeaderFile #include #endif #ifndef _Handle_TColStd_HArray1OfReal_HeaderFile #include #endif #ifndef _Handle_TColStd_HArray1OfInteger_HeaderFile #include #endif #ifndef _Standard_Real_HeaderFile #include #endif #ifndef _Geom_BoundedCurve_HeaderFile #include #endif #ifndef _Handle_Geom_Geometry_HeaderFile #include #endif class TColgp_HArray1OfPnt; class TColStd_HArray1OfReal; class TColStd_HArray1OfInteger; class Standard_ConstructionError; class Standard_DimensionError; class Standard_DomainError; class Standard_OutOfRange; class Standard_RangeError; class Standard_NoSuchObject; class Geom_UndefinedDerivative; class TColgp_Array1OfPnt; class TColStd_Array1OfReal; class TColStd_Array1OfInteger; class gp_Pnt; class gp_Vec; class gp_Trsf; class Geom_Geometry; //! Definition of the B_spline curve.
//! A B-spline curve can be
//! Uniform or non-uniform
//! Rational or non-rational
//! Periodic or non-periodic
//!
//! a b-spline curve is defined by :
//! its degree; the degree for a
//! Geom_BSplineCurve is limited to a value (25)
//! which is defined and controlled by the system.
//! This value is returned by the function MaxDegree;
//! - its periodic or non-periodic nature;
//! - a table of poles (also called control points), with
//! their associated weights if the BSpline curve is
//! rational. The poles of the curve are "control
//! points" used to deform the curve. If the curve is
//! non-periodic, the first pole is the start point of
//! the curve, and the last pole is the end point of
//! the curve. The segment which joins the first pole
//! to the second pole is the tangent to the curve at
//! its start point, and the segment which joins the
//! last pole to the second-from-last pole is the
//! tangent to the curve at its end point. If the curve
//! is periodic, these geometric properties are not
//! verified. It is more difficult to give a geometric
//! signification to the weights but are useful for
//! providing exact representations of the arcs of a
//! circle or ellipse. Moreover, if the weights of all the
//! poles are equal, the curve has a polynomial
//! equation; it is therefore a non-rational curve.
//! - a table of knots with their multiplicities. For a
//! Geom_BSplineCurve, the table of knots is an
//! increasing sequence of reals without repetition;
//! the multiplicities define the repetition of the knots.
//! A BSpline curve is a piecewise polynomial or
//! rational curve. The knots are the parameters of
//! junction points between two pieces. The
//! multiplicity Mult(i) of the knot Knot(i) of
//! the BSpline curve is related to the degree of
//! continuity of the curve at the knot Knot(i),
//! which is equal to Degree - Mult(i)
//! where Degree is the degree of the BSpline curve.
//! If the knots are regularly spaced (i.e. the difference
//! between two consecutive knots is a constant), three
//! specific and frequently used cases of knot
//! distribution can be identified:
//! - "uniform" if all multiplicities are equal to 1,
//! - "quasi-uniform" if all multiplicities are equal to 1,
//! except the first and the last knot which have a
//! multiplicity of Degree + 1, where Degree is
//! the degree of the BSpline curve,
//! - "Piecewise Bezier" if all multiplicities are equal to
//! Degree except the first and last knot which
//! have a multiplicity of Degree + 1, where
//! Degree is the degree of the BSpline curve. A
//! curve of this type is a concatenation of arcs of Bezier curves.
//! If the BSpline curve is not periodic:
//! - the bounds of the Poles and Weights tables are 1
//! and NbPoles, where NbPoles is the number
//! of poles of the BSpline curve,
//! - the bounds of the Knots and Multiplicities tables
//! are 1 and NbKnots, where NbKnots is the
//! number of knots of the BSpline curve.
//! If the BSpline curve is periodic, and if there are k
//! periodic knots and p periodic poles, the period is:
//! period = Knot(k + 1) - Knot(1)
//! and the poles and knots tables can be considered
//! as infinite tables, verifying:
//! - Knot(i+k) = Knot(i) + period
//! - Pole(i+p) = Pole(i)
//! Note: data structures of a periodic BSpline curve
//! are more complex than those of a non-periodic one.
//! Warning
//! In this class, weight value is considered to be zero if
//! the weight is less than or equal to gp::Resolution().
//!
//! References :
//! . A survey of curve and surface methods in CADG Wolfgang BOHM
//! CAGD 1 (1984)
//! . On de Boor-like algorithms and blossoming Wolfgang BOEHM
//! cagd 5 (1988)
//! . Blossoming and knot insertion algorithms for B-spline curves
//! Ronald N. GOLDMAN
//! . Modelisation des surfaces en CAO, Henri GIAUME Peugeot SA
//! . Curves and Surfaces for Computer Aided Geometric Design,
//! a practical guide Gerald Farin
class Geom_BSplineCurve : public Geom_BoundedCurve { public: //! Creates a non-rational B_spline curve on the
//! basis of degree .
Standard_EXPORT Geom_BSplineCurve(const TColgp_Array1OfPnt& Poles,const TColStd_Array1OfReal& Knots,const TColStd_Array1OfInteger& Multiplicities,const Standard_Integer Degree,const Standard_Boolean Periodic = Standard_False); //! Creates a rational B_spline curve on the basis
//! of degree .
//! Raises ConstructionError subject to the following conditions
//! 0 < Degree <= MaxDegree.
//!
//! Weights.Length() == Poles.Length()
//!
//! Knots.Length() == Mults.Length() >= 2
//!
//! Knots(i) < Knots(i+1) (Knots are increasing)
//!
//! 1 <= Mults(i) <= Degree
//!
//! On a non periodic curve the first and last multiplicities
//! may be Degree+1 (this is even recommanded if you want the
//! curve to start and finish on the first and last pole).
//!
//! On a periodic curve the first and the last multicities
//! must be the same.
//!
//! on non-periodic curves
//!
//! Poles.Length() == Sum(Mults(i)) - Degree - 1 >= 2
//!
//! on periodic curves
//!
//! Poles.Length() == Sum(Mults(i)) except the first or last
Standard_EXPORT Geom_BSplineCurve(const TColgp_Array1OfPnt& Poles,const TColStd_Array1OfReal& Weights,const TColStd_Array1OfReal& Knots,const TColStd_Array1OfInteger& Multiplicities,const Standard_Integer Degree,const Standard_Boolean Periodic = Standard_False,const Standard_Boolean CheckRational = Standard_True); //! Increases the degree of this BSpline curve to
//! Degree. As a result, the poles, weights and
//! multiplicities tables are modified; the knots table is
//! not changed. Nothing is done if Degree is less than
//! or equal to the current degree.
//! Exceptions
//! Standard_ConstructionError if Degree is greater than
//! Geom_BSplineCurve::MaxDegree().
Standard_EXPORT void IncreaseDegree(const Standard_Integer Degree) ; //!Increases the multiplicity of the knot to
//! .
//!
//! If is lower or equal to the current
//! multiplicity nothing is done. If is higher than
//! the degree the degree is used.
//! If is not in [FirstUKnotIndex, LastUKnotIndex]
Standard_EXPORT void IncreaseMultiplicity(const Standard_Integer Index,const Standard_Integer M) ; //!Increases the multiplicities of the knots in
//! [I1,I2] to .
//!
//! For each knot if is lower or equal to the
//! current multiplicity nothing is done. If is
//! higher than the degree the degree is used.
//! If are not in [FirstUKnotIndex, LastUKnotIndex]
Standard_EXPORT void IncreaseMultiplicity(const Standard_Integer I1,const Standard_Integer I2,const Standard_Integer M) ; //!Increment the multiplicities of the knots in
//! [I1,I2] by .
//!
//! If is not positive nithing is done.
//!
//! For each knot the resulting multiplicity is
//! limited to the Degree.
//! If are not in [FirstUKnotIndex, LastUKnotIndex]
Standard_EXPORT void IncrementMultiplicity(const Standard_Integer I1,const Standard_Integer I2,const Standard_Integer M) ; //! Inserts a knot value in the sequence of knots. If
//! is an existing knot the multiplicity is
//! increased by .
//!
//! If U is not on the parameter range nothing is
//! done.
//!
//! If the multiplicity is negative or null nothing is
//! done. The new multiplicity is limited to the
//! degree.
//!
//! The tolerance criterion for knots equality is
//! the max of Epsilon(U) and ParametricTolerance.
Standard_EXPORT void InsertKnot(const Standard_Real U,const Standard_Integer M = 1,const Standard_Real ParametricTolerance = 0.0,const Standard_Boolean Add = Standard_True) ; //! Inserts a set of knots values in the sequence of
//! knots.
//!
//! For each U = Knots(i), M = Mults(i)
//!
//! If is an existing knot the multiplicity is
//! increased by if is True, increased to
//! if is False.
//!
//! If U is not on the parameter range nothing is
//! done.
//!
//! If the multiplicity is negative or null nothing is
//! done. The new multiplicity is limited to the
//! degree.
//!
//! The tolerance criterion for knots equality is
//! the max of Epsilon(U) and ParametricTolerance.
Standard_EXPORT void InsertKnots(const TColStd_Array1OfReal& Knots,const TColStd_Array1OfInteger& Mults,const Standard_Real ParametricTolerance = 0.0,const Standard_Boolean Add = Standard_False) ; //! Reduces the multiplicity of the knot of index Index
//! to M. If M is equal to 0, the knot is removed.
//! With a modification of this type, the array of poles is also modified.
//! Two different algorithms are systematically used to
//! compute the new poles of the curve. If, for each
//! pole, the distance between the pole calculated
//! using the first algorithm and the same pole
//! calculated using the second algorithm, is less than
//! Tolerance, this ensures that the curve is not
//! modified by more than Tolerance. Under these
//! conditions, true is returned; otherwise, false is returned.
//! A low tolerance is used to prevent modification of
//! the curve. A high tolerance is used to "smooth" the curve.
//! Exceptions
//! Standard_OutOfRange if Index is outside the
//! bounds of the knots table.
//! pole insertion and pole removing
//! this operation is limited to the Uniform or QuasiUniform
//! BSplineCurve. The knot values are modified . If the BSpline is
//! NonUniform or Piecewise Bezier an exception Construction error
//! is raised.
Standard_EXPORT Standard_Boolean RemoveKnot(const Standard_Integer Index,const Standard_Integer M,const Standard_Real Tolerance) ; //! Changes the direction of parametrization of . The Knot
//! sequence is modified, the FirstParameter and the
//! LastParameter are not modified. The StartPoint of the
//! initial curve becomes the EndPoint of the reversed curve
//! and the EndPoint of the initial curve becomes the StartPoint
//! of the reversed curve.
Standard_EXPORT void Reverse() ; //! Returns the parameter on the reversed curve for
//! the point of parameter U on .
//!
//! returns UFirst + ULast - U
Standard_EXPORT Standard_Real ReversedParameter(const Standard_Real U) const; //! Modifies this BSpline curve by segmenting it between
//! U1 and U2. Either of these values can be outside the
//! bounds of the curve, but U2 must be greater than U1.
//! All data structure tables of this BSpline curve are
//! modified, but the knots located between U1 and U2
//! are retained. The degree of the curve is not modified.
//! Warnings :
//! Even if is not closed it can become closed after the
//! segmentation for example if U1 or U2 are out of the bounds
//! of the curve or if the curve makes loop.
//! After the segmentation the length of a curve can be null.
//! raises if U2 < U1.
Standard_EXPORT void Segment(const Standard_Real U1,const Standard_Real U2) ; //! Modifies this BSpline curve by assigning the value K
//! to the knot of index Index in the knots table. This is a
//! relatively local modification because K must be such that:
//! Knots(Index - 1) < K < Knots(Index + 1)
//! The second syntax allows you also to increase the
//! multiplicity of the knot to M (but it is not possible to
//! decrease the multiplicity of the knot with this function).
//! Standard_ConstructionError if:
//! - K is not such that:
//! Knots(Index - 1) < K < Knots(Index + 1)
//! - M is greater than the degree of this BSpline curve
//! or lower than the previous multiplicity of knot of
//! index Index in the knots table.
//! Standard_OutOfRange if Index is outside the bounds of the knots table.
Standard_EXPORT void SetKnot(const Standard_Integer Index,const Standard_Real K) ; //! Modifies this BSpline curve by assigning the array
//! K to its knots table. The multiplicity of the knots is not modified.
//! Exceptions
//! Standard_ConstructionError if the values in the
//! array K are not in ascending order.
//! Standard_OutOfRange if the bounds of the array
//! K are not respectively 1 and the number of knots of this BSpline curve.
Standard_EXPORT void SetKnots(const TColStd_Array1OfReal& K) ; //! Changes the knot of range Index with its multiplicity.
//! You can increase the multiplicity of a knot but it is
//! not allowed to decrease the multiplicity of an existing knot.
//! Raised if K >= Knots(Index+1) or K <= Knots(Index-1).
//! Raised if M is greater than Degree or lower than the previous
//! multiplicity of knot of range Index.
//! Raised if Index < 1 || Index > NbKnots
Standard_EXPORT void SetKnot(const Standard_Integer Index,const Standard_Real K,const Standard_Integer M) ; //! returns the parameter normalized within
//! the period if the curve is periodic : otherwise
//! does not do anything
Standard_EXPORT void PeriodicNormalization(Standard_Real& U) const; //! Changes this BSpline curve into a periodic curve.
//! To become periodic, the curve must first be closed.
//! Next, the knot sequence must be periodic. For this,
//! FirstUKnotIndex and LastUKnotIndex are used
//! to compute I1 and I2, the indexes in the knots
//! array of the knots corresponding to the first and
//! last parameters of this BSpline curve.
//! The period is therefore: Knots(I2) - Knots(I1).
//! Consequently, the knots and poles tables are modified.
//! Exceptions
//! Standard_ConstructionError if this BSpline curve is not closed.
Standard_EXPORT void SetPeriodic() ; //! Assigns the knot of index Index in the knots table as
//! the origin of this periodic BSpline curve. As a
//! consequence, the knots and poles tables are modified.
//! Exceptions
//! Standard_NoSuchObject if this curve is not periodic.
//! Standard_DomainError if Index is outside the bounds of the knots table.
Standard_EXPORT void SetOrigin(const Standard_Integer Index) ; //! Set the origin of a periodic curve at Knot U. If U
//! is not a knot of the BSpline a new knot is
//! inseted. KnotVector and poles are modified.
//! Raised if the curve is not periodic
Standard_EXPORT void SetOrigin(const Standard_Real U,const Standard_Real Tol) ; //! Changes this BSpline curve into a non-periodic
//! curve. If this curve is already non-periodic, it is not modified.
//! Note: the poles and knots tables are modified.
//! Warning
//! If this curve is periodic, as the multiplicity of the first
//! and last knots is not modified, and is not equal to
//! Degree + 1, where Degree is the degree of
//! this BSpline curve, the start and end points of the
//! curve are not its first and last poles.
Standard_EXPORT void SetNotPeriodic() ; //! Modifies this BSpline curve by assigning P to the pole
//! of index Index in the poles table.
//! Exceptions
//! Standard_OutOfRange if Index is outside the
//! bounds of the poles table.
//! Standard_ConstructionError if Weight is negative or null.
Standard_EXPORT void SetPole(const Standard_Integer Index,const gp_Pnt& P) ; //! Modifies this BSpline curve by assigning P to the pole
//! of index Index in the poles table.
//! This syntax also allows you to modify the
//! weight of the modified pole, which becomes Weight.
//! In this case, if this BSpline curve is non-rational, it
//! can become rational and vice versa.
//! Exceptions
//! Standard_OutOfRange if Index is outside the
//! bounds of the poles table.
//! Standard_ConstructionError if Weight is negative or null.
Standard_EXPORT void SetPole(const Standard_Integer Index,const gp_Pnt& P,const Standard_Real Weight) ; //! Changes the weight for the pole of range Index.
//! If the curve was non rational it can become rational.
//! If the curve was rational it can become non rational.
//! Raised if Index < 1 || Index > NbPoles
//! Raised if Weight <= 0.0
Standard_EXPORT void SetWeight(const Standard_Integer Index,const Standard_Real Weight) ; //! Moves the point of parameter U of this BSpline curve
//! to P. Index1 and Index2 are the indexes in the table
//! of poles of this BSpline curve of the first and last
//! poles designated to be moved.
//! FirstModifiedPole and LastModifiedPole are the
//! indexes of the first and last poles which are effectively modified.
//! In the event of incompatibility between Index1, Index2 and the value U:
//! - no change is made to this BSpline curve, and
//! - the FirstModifiedPole and LastModifiedPole are returned null.
//! Exceptions
//! Standard_OutOfRange if:
//! - Index1 is greater than or equal to Index2, or
//! - Index1 or Index2 is less than 1 or greater than the
//! number of poles of this BSpline curve.
Standard_EXPORT void MovePoint(const Standard_Real U,const gp_Pnt& P,const Standard_Integer Index1,const Standard_Integer Index2,Standard_Integer& FirstModifiedPole,Standard_Integer& LastModifiedPole) ; //! Move a point with parameter U to P.
//! and makes it tangent at U be Tangent.
//! StartingCondition = -1 means first can move
//! EndingCondition = -1 means last point can move
//! StartingCondition = 0 means the first point cannot move
//! EndingCondition = 0 means the last point cannot move
//! StartingCondition = 1 means the first point and tangent cannot move
//! EndingCondition = 1 means the last point and tangent cannot move
//! and so forth
//! ErrorStatus != 0 means that there are not enought degree of freedom
//! with the constrain to deform the curve accordingly
//!
Standard_EXPORT void MovePointAndTangent(const Standard_Real U,const gp_Pnt& P,const gp_Vec& Tangent,const Standard_Real Tolerance,const Standard_Integer StartingCondition,const Standard_Integer EndingCondition,Standard_Integer& ErrorStatus) ; //! Returns the continuity of the curve, the curve is at least C0.
//! Raised if N < 0.
Standard_EXPORT Standard_Boolean IsCN(const Standard_Integer N) const; //! Returns true if the distance between the first point and the
//! last point of the curve is lower or equal to Resolution
//! from package gp.
//! Warnings :
//! The first and the last point can be different from the first
//! pole and the last pole of the curve.
Standard_EXPORT Standard_Boolean IsClosed() const; //! Returns True if the curve is periodic.
Standard_EXPORT Standard_Boolean IsPeriodic() const; //! Returns True if the weights are not identical.
//! The tolerance criterion is Epsilon of the class Real.
Standard_EXPORT Standard_Boolean IsRational() const; //! Returns the global continuity of the curve :
//! C0 : only geometric continuity,
//! C1 : continuity of the first derivative all along the Curve,
//! C2 : continuity of the second derivative all along the Curve,
//! C3 : continuity of the third derivative all along the Curve,
//! CN : the order of continuity is infinite.
//! For a B-spline curve of degree d if a knot Ui has a
//! multiplicity p the B-spline curve is only Cd-p continuous
//! at Ui. So the global continuity of the curve can't be greater
//! than Cd-p where p is the maximum multiplicity of the interior
//! Knots. In the interior of a knot span the curve is infinitely
//! continuously differentiable.
Standard_EXPORT GeomAbs_Shape Continuity() const; //! Returns the degree of this BSpline curve.
//! The degree of a Geom_BSplineCurve curve cannot
//! be greater than Geom_BSplineCurve::MaxDegree().
//! Computation of value and derivatives
Standard_EXPORT Standard_Integer Degree() const; //! Returns in P the point of parameter U.
Standard_EXPORT void D0(const Standard_Real U,gp_Pnt& P) const; //! Raised if the continuity of the curve is not C1.
Standard_EXPORT void D1(const Standard_Real U,gp_Pnt& P,gp_Vec& V1) const; //! Raised if the continuity of the curve is not C2.
Standard_EXPORT void D2(const Standard_Real U,gp_Pnt& P,gp_Vec& V1,gp_Vec& V2) const; //! Raised if the continuity of the curve is not C3.
Standard_EXPORT void D3(const Standard_Real U,gp_Pnt& P,gp_Vec& V1,gp_Vec& V2,gp_Vec& V3) const; //! For the point of parameter U of this BSpline curve,
//! computes the vector corresponding to the Nth derivative.
//! Warning
//! On a point where the continuity of the curve is not the
//! one requested, this function impacts the part defined
//! by the parameter with a value greater than U, i.e. the
//! part of the curve to the "right" of the singularity.
//! Exceptions
//! Standard_RangeError if N is less than 1.
//! The following functions compute the point of parameter U
//! and the derivatives at this point on the B-spline curve
//! arc defined between the knot FromK1 and the knot ToK2.
//! U can be out of bounds [Knot (FromK1), Knot (ToK2)] but
//! for the computation we only use the definition of the curve
//! between these two knots. This method is useful to compute
//! local derivative, if the order of continuity of the whole
//! curve is not greater enough. Inside the parametric
//! domain Knot (FromK1), Knot (ToK2) the evaluations are
//! the same as if we consider the whole definition of the
//! curve. Of course the evaluations are different outside
//! this parametric domain.
Standard_EXPORT gp_Vec DN(const Standard_Real U,const Standard_Integer N) const; //! Raised if FromK1 = ToK2.
//! Raised if FromK1 and ToK2 are not in the range
//! [FirstUKnotIndex, LastUKnotIndex].
Standard_EXPORT gp_Pnt LocalValue(const Standard_Real U,const Standard_Integer FromK1,const Standard_Integer ToK2) const; //! Raised if FromK1 = ToK2.
//! Raised if FromK1 and ToK2 are not in the range
//! [FirstUKnotIndex, LastUKnotIndex].
Standard_EXPORT void LocalD0(const Standard_Real U,const Standard_Integer FromK1,const Standard_Integer ToK2,gp_Pnt& P) const; //! Raised if the local continuity of the curve is not C1
//! between the knot K1 and the knot K2.
//! Raised if FromK1 = ToK2.
//! Raised if FromK1 and ToK2 are not in the range
//! [FirstUKnotIndex, LastUKnotIndex].
Standard_EXPORT void LocalD1(const Standard_Real U,const Standard_Integer FromK1,const Standard_Integer ToK2,gp_Pnt& P,gp_Vec& V1) const; //! Raised if the local continuity of the curve is not C2
//! between the knot K1 and the knot K2.
//! Raised if FromK1 = ToK2.
//! Raised if FromK1 and ToK2 are not in the range
//! [FirstUKnotIndex, LastUKnotIndex].
Standard_EXPORT void LocalD2(const Standard_Real U,const Standard_Integer FromK1,const Standard_Integer ToK2,gp_Pnt& P,gp_Vec& V1,gp_Vec& V2) const; //! Raised if the local continuity of the curve is not C3
//! between the knot K1 and the knot K2.
//! Raised if FromK1 = ToK2.
//! Raised if FromK1 and ToK2 are not in the range
//! [FirstUKnotIndex, LastUKnotIndex].
Standard_EXPORT void LocalD3(const Standard_Real U,const Standard_Integer FromK1,const Standard_Integer ToK2,gp_Pnt& P,gp_Vec& V1,gp_Vec& V2,gp_Vec& V3) const; //! Raised if the local continuity of the curve is not CN
//! between the knot K1 and the knot K2.
//! Raised if FromK1 = ToK2.
//! Raised if N < 1.
//! Raises if FromK1 and ToK2 are not in the range
//! [FirstUKnotIndex, LastUKnotIndex].
Standard_EXPORT gp_Vec LocalDN(const Standard_Real U,const Standard_Integer FromK1,const Standard_Integer ToK2,const Standard_Integer N) const; //! Returns the last point of the curve.
//! Warnings :
//! The last point of the curve is different from the last
//! pole of the curve if the multiplicity of the last knot
//! is lower than Degree.
Standard_EXPORT gp_Pnt EndPoint() const; //! Returns the index in the knot array of the knot
//! corresponding to the first or last parameter of this BSpline curve.
//! For a BSpline curve, the first (or last) parameter
//! (which gives the start (or end) point of the curve) is a
//! knot value. However, if the multiplicity of the first (or
//! last) knot is less than Degree + 1, where
//! Degree is the degree of the curve, it is not the first
//! (or last) knot of the curve.
Standard_EXPORT Standard_Integer FirstUKnotIndex() const; //! Returns the value of the first parameter of this
//! BSpline curve. This is a knot value.
//! The first parameter is the one of the start point of the BSpline curve.
Standard_EXPORT Standard_Real FirstParameter() const; //! Returns the knot of range Index. When there is a knot
//! with a multiplicity greater than 1 the knot is not repeated.
//! The method Multiplicity can be used to get the multiplicity
//! of the Knot.
//! Raised if Index < 1 or Index > NbKnots
Standard_EXPORT Standard_Real Knot(const Standard_Integer Index) const; //! returns the knot values of the B-spline curve;
//! Warning
//! A knot with a multiplicity greater than 1 is not
//! repeated in the knot table. The Multiplicity function
//! can be used to obtain the multiplicity of each knot.
//! Raised if the length of K is not equal to the number of knots.
Standard_EXPORT void Knots(TColStd_Array1OfReal& K) const; //! Returns K, the knots sequence of this BSpline curve.
//! In this sequence, knots with a multiplicity greater than 1 are repeated.
//! In the case of a non-periodic curve the length of the
//! sequence must be equal to the sum of the NbKnots
//! multiplicities of the knots of the curve (where
//! NbKnots is the number of knots of this BSpline
//! curve). This sum is also equal to : NbPoles + Degree + 1
//! where NbPoles is the number of poles and
//! Degree the degree of this BSpline curve.
//! In the case of a periodic curve, if there are k periodic
//! knots, the period is Knot(k+1) - Knot(1).
//! The initial sequence is built by writing knots 1 to k+1,
//! which are repeated according to their corresponding multiplicities.
//! If Degree is the degree of the curve, the degree of
//! continuity of the curve at the knot of index 1 (or k+1)
//! is equal to c = Degree + 1 - Mult(1). c
//! knots are then inserted at the beginning and end of
//! the initial sequence:
//! - the c values of knots preceding the first item
//! Knot(k+1) in the initial sequence are inserted
//! at the beginning; the period is subtracted from these c values;
//! - the c values of knots following the last item
//! Knot(1) in the initial sequence are inserted at
//! the end; the period is added to these c values.
//! The length of the sequence must therefore be equal to:
//! NbPoles + 2*Degree - Mult(1) + 2.
//! Example
//! For a non-periodic BSpline curve of degree 2 where:
//! - the array of knots is: { k1 k2 k3 k4 },
//! - with associated multiplicities: { 3 1 2 3 },
//! the knot sequence is:
//! K = { k1 k1 k1 k2 k3 k3 k4 k4 k4 }
//! For a periodic BSpline curve of degree 4 , which is
//! "C1" continuous at the first knot, and where :
//! - the periodic knots are: { k1 k2 k3 (k4) }
//! (3 periodic knots: the points of parameter k1 and k4
//! are identical, the period is p = k4 - k1),
//! - with associated multiplicities: { 3 1 2 (3) },
//! the degree of continuity at knots k1 and k4 is:
//! Degree + 1 - Mult(i) = 2.
//! 2 supplementary knots are added at the beginning
//! and end of the sequence:
//! - at the beginning: the 2 knots preceding k4 minus
//! the period; in this example, this is k3 - p both times;
//! - at the end: the 2 knots following k1 plus the period;
//! in this example, this is k2 + p and k3 + p.
//! The knot sequence is therefore:
//! K = { k3-p k3-p k1 k1 k1 k2 k3 k3
//! k4 k4 k4 k2+p k3+p }
//! Exceptions
//! Standard_DimensionError if the array K is not of
//! the appropriate length.Returns the knots sequence.
Standard_EXPORT void KnotSequence(TColStd_Array1OfReal& K) const; //! Returns NonUniform or Uniform or QuasiUniform or PiecewiseBezier.
//! If all the knots differ by a positive constant from the
//! preceding knot the BSpline Curve can be :
//! - Uniform if all the knots are of multiplicity 1,
//! - QuasiUniform if all the knots are of multiplicity 1 except for
//! the first and last knot which are of multiplicity Degree + 1,
//! - PiecewiseBezier if the first and last knots have multiplicity
//! Degree + 1 and if interior knots have multiplicity Degree
//! A piecewise Bezier with only two knots is a BezierCurve.
//! else the curve is non uniform.
//! The tolerance criterion is Epsilon from class Real.
Standard_EXPORT GeomAbs_BSplKnotDistribution KnotDistribution() const; //! For a BSpline curve the last parameter (which gives the
//! end point of the curve) is a knot value but if the
//! multiplicity of the last knot index is lower than
//! Degree + 1 it is not the last knot of the curve. This
//! method computes the index of the knot corresponding to
//! the last parameter.
Standard_EXPORT Standard_Integer LastUKnotIndex() const; //! Computes the parametric value of the end point of the curve.
//! It is a knot value.
Standard_EXPORT Standard_Real LastParameter() const; //! Locates the parametric value U in the sequence of knots.
//! If "WithKnotRepetition" is True we consider the knot's
//! representation with repetition of multiple knot value,
//! otherwise we consider the knot's representation with
//! no repetition of multiple knot values.
//! Knots (I1) <= U <= Knots (I2)
//! . if I1 = I2 U is a knot value (the tolerance criterion
//! ParametricTolerance is used).
//! . if I1 < 1 => U < Knots (1) - Abs(ParametricTolerance)
//! . if I2 > NbKnots => U > Knots (NbKnots) + Abs(ParametricTolerance)
Standard_EXPORT void LocateU(const Standard_Real U,const Standard_Real ParametricTolerance,Standard_Integer& I1,Standard_Integer& I2,const Standard_Boolean WithKnotRepetition = Standard_False) const; //! Returns the multiplicity of the knots of range Index.
//! Raised if Index < 1 or Index > NbKnots
Standard_EXPORT Standard_Integer Multiplicity(const Standard_Integer Index) const; //! Returns the multiplicity of the knots of the curve.
//! Raised if the length of M is not equal to NbKnots.
Standard_EXPORT void Multiplicities(TColStd_Array1OfInteger& M) const; //! Returns the number of knots. This method returns the number of
//! knot without repetition of multiple knots.
Standard_EXPORT Standard_Integer NbKnots() const; //! Returns the number of poles
Standard_EXPORT Standard_Integer NbPoles() const; //! Returns the pole of range Index.
//! Raised if Index < 1 or Index > NbPoles.
Standard_EXPORT gp_Pnt Pole(const Standard_Integer Index) const; //! Returns the poles of the B-spline curve;
//! Raised if the length of P is not equal to the number of poles.
Standard_EXPORT void Poles(TColgp_Array1OfPnt& P) const; //! Returns the start point of the curve.
//! Warnings :
//! This point is different from the first pole of the curve if the
//! multiplicity of the first knot is lower than Degree.
Standard_EXPORT gp_Pnt StartPoint() const; //! Returns the weight of the pole of range Index .
//! Raised if Index < 1 or Index > NbPoles.
Standard_EXPORT Standard_Real Weight(const Standard_Integer Index) const; //! Returns the weights of the B-spline curve;
//! Raised if the length of W is not equal to NbPoles.
Standard_EXPORT void Weights(TColStd_Array1OfReal& W) const; //! Applies the transformation T to this BSpline curve.
Standard_EXPORT void Transform(const gp_Trsf& T) ; //! Returns the value of the maximum degree of the normalized
//! B-spline basis functions in this package.
Standard_EXPORT static Standard_Integer MaxDegree() ; //! Computes for this BSpline curve the parametric
//! tolerance UTolerance for a given 3D tolerance Tolerance3D.
//! If f(t) is the equation of this BSpline curve,
//! UTolerance ensures that:
//! | t1 - t0| < Utolerance ===>
//! |f(t1) - f(t0)| < Tolerance3D
Standard_EXPORT void Resolution(const Standard_Real Tolerance3D,Standard_Real& UTolerance) ; //! Creates a new object which is a copy of this BSpline curve.
Standard_EXPORT Handle_Geom_Geometry Copy() const; DEFINE_STANDARD_RTTI(Geom_BSplineCurve) protected: private: //! Tells whether the Cache is valid for the
//! given parameter
//! Warnings : the parameter must be normalized within
//! the period if the curve is periodic. Otherwise
//! the answer will be false
//!
Standard_EXPORT Standard_Boolean IsCacheValid(const Standard_Real Parameter) const; //! Invalidates the cache. This has to be private
//! this has to be private
Standard_EXPORT void InvalidateCache() ; //! Recompute the flatknots, the knotsdistribution, the continuity.
Standard_EXPORT void UpdateKnots() ; //! updates the cache and validates it
Standard_EXPORT void ValidateCache(const Standard_Real Parameter) ; Standard_Boolean rational; Standard_Boolean periodic; GeomAbs_BSplKnotDistribution knotSet; GeomAbs_Shape smooth; Standard_Integer deg; Handle_TColgp_HArray1OfPnt poles; Handle_TColStd_HArray1OfReal weights; Handle_TColStd_HArray1OfReal flatknots; Handle_TColStd_HArray1OfReal knots; Handle_TColStd_HArray1OfInteger mults; Handle_TColgp_HArray1OfPnt cachepoles; Handle_TColStd_HArray1OfReal cacheweights; Standard_Integer validcache; Standard_Real parametercache; Standard_Real spanlenghtcache; Standard_Integer spanindexcache; Standard_Real maxderivinv; Standard_Boolean maxderivinvok; }; // other Inline functions and methods (like "C++: function call" methods) #endif