// This file is generated by WOK (CPPExt).
// Please do not edit this file; modify original file instead.
// The copyright and license terms as defined for the original file apply to 
// this header file considered to be the "object code" form of the original source.

#ifndef _BRepBuilderAPI_MakeEdge2d_HeaderFile
#define _BRepBuilderAPI_MakeEdge2d_HeaderFile

#ifndef _Standard_HeaderFile
#include <Standard.hxx>
#endif
#ifndef _Standard_Macro_HeaderFile
#include <Standard_Macro.hxx>
#endif

#ifndef _BRepLib_MakeEdge2d_HeaderFile
#include <BRepLib_MakeEdge2d.hxx>
#endif
#ifndef _BRepBuilderAPI_MakeShape_HeaderFile
#include <BRepBuilderAPI_MakeShape.hxx>
#endif
#ifndef _Standard_Real_HeaderFile
#include <Standard_Real.hxx>
#endif
#ifndef _Handle_Geom2d_Curve_HeaderFile
#include <Handle_Geom2d_Curve.hxx>
#endif
#ifndef _Standard_Boolean_HeaderFile
#include <Standard_Boolean.hxx>
#endif
#ifndef _BRepBuilderAPI_EdgeError_HeaderFile
#include <BRepBuilderAPI_EdgeError.hxx>
#endif
class StdFail_NotDone;
class TopoDS_Vertex;
class gp_Pnt2d;
class gp_Lin2d;
class gp_Circ2d;
class gp_Elips2d;
class gp_Hypr2d;
class gp_Parab2d;
class Geom2d_Curve;
class TopoDS_Edge;


//! Provides methods to build edges. <br>
//! <br>
//!          The   methods have  the  following   syntax, where <br>
//!          TheCurve is one of Lin2d, Circ2d, ... <br>
//! <br>
//!          Create(C : TheCurve) <br>
//! <br>
//!            Makes an edge on  the whole curve.  Add vertices <br>
//!            on finite curves. <br>
//! <br>
//!          Create(C : TheCurve; p1,p2 : Real) <br>
//! <br>
//!            Make an edge  on the curve between parameters p1 <br>
//!            and p2. if p2 < p1 the edge will be REVERSED. If <br>
//!            p1  or p2 is infinite the  curve will be open in <br>
//!            that  direction. Vertices are created for finite <br>
//!            values of p1 and p2. <br>
//! <br>
//!          Create(C : TheCurve; P1, P2 : Pnt2d from gp) <br>
//! <br>
//!            Make an edge on the curve  between the points P1 <br>
//!            and P2. The  points are projected on   the curve <br>
//!            and the   previous method is  used. An  error is <br>
//!            raised if the points are not on the curve. <br>
//! <br>
//!          Create(C : TheCurve; V1, V2 : Vertex from TopoDS) <br>
//! <br>
//!            Make an edge  on the curve  between the vertices <br>
//!            V1 and V2. Same as the  previous but no vertices <br>
//!            are created. If a vertex is  Null the curve will <br>
//!            be open in this direction. <br>
class BRepBuilderAPI_MakeEdge2d  : public BRepBuilderAPI_MakeShape {
public:

  void* operator new(size_t,void* anAddress) 
  {
    return anAddress;
  }
  void* operator new(size_t size) 
  {
    return Standard::Allocate(size); 
  }
  void  operator delete(void *anAddress) 
  {
    if (anAddress) Standard::Free((Standard_Address&)anAddress); 
  }

  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const TopoDS_Vertex& V1,const TopoDS_Vertex& V2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Pnt2d& P1,const gp_Pnt2d& P2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Lin2d& L);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Lin2d& L,const Standard_Real p1,const Standard_Real p2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Lin2d& L,const gp_Pnt2d& P1,const gp_Pnt2d& P2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Lin2d& L,const TopoDS_Vertex& V1,const TopoDS_Vertex& V2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Circ2d& L);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Circ2d& L,const Standard_Real p1,const Standard_Real p2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Circ2d& L,const gp_Pnt2d& P1,const gp_Pnt2d& P2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Circ2d& L,const TopoDS_Vertex& V1,const TopoDS_Vertex& V2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Elips2d& L);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Elips2d& L,const Standard_Real p1,const Standard_Real p2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Elips2d& L,const gp_Pnt2d& P1,const gp_Pnt2d& P2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Elips2d& L,const TopoDS_Vertex& V1,const TopoDS_Vertex& V2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Hypr2d& L);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Hypr2d& L,const Standard_Real p1,const Standard_Real p2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Hypr2d& L,const gp_Pnt2d& P1,const gp_Pnt2d& P2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Hypr2d& L,const TopoDS_Vertex& V1,const TopoDS_Vertex& V2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Parab2d& L);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Parab2d& L,const Standard_Real p1,const Standard_Real p2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Parab2d& L,const gp_Pnt2d& P1,const gp_Pnt2d& P2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const gp_Parab2d& L,const TopoDS_Vertex& V1,const TopoDS_Vertex& V2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const Handle(Geom2d_Curve)& L);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const Handle(Geom2d_Curve)& L,const Standard_Real p1,const Standard_Real p2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const Handle(Geom2d_Curve)& L,const gp_Pnt2d& P1,const gp_Pnt2d& P2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const Handle(Geom2d_Curve)& L,const TopoDS_Vertex& V1,const TopoDS_Vertex& V2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const Handle(Geom2d_Curve)& L,const gp_Pnt2d& P1,const gp_Pnt2d& P2,const Standard_Real p1,const Standard_Real p2);
  
  Standard_EXPORT   BRepBuilderAPI_MakeEdge2d(const Handle(Geom2d_Curve)& L,const TopoDS_Vertex& V1,const TopoDS_Vertex& V2,const Standard_Real p1,const Standard_Real p2);
  
  Standard_EXPORT     void Init(const Handle(Geom2d_Curve)& C) ;
  
  Standard_EXPORT     void Init(const Handle(Geom2d_Curve)& C,const Standard_Real p1,const Standard_Real p2) ;
  
  Standard_EXPORT     void Init(const Handle(Geom2d_Curve)& C,const gp_Pnt2d& P1,const gp_Pnt2d& P2) ;
  
  Standard_EXPORT     void Init(const Handle(Geom2d_Curve)& C,const TopoDS_Vertex& V1,const TopoDS_Vertex& V2) ;
  
  Standard_EXPORT     void Init(const Handle(Geom2d_Curve)& C,const gp_Pnt2d& P1,const gp_Pnt2d& P2,const Standard_Real p1,const Standard_Real p2) ;
  
  Standard_EXPORT     void Init(const Handle(Geom2d_Curve)& C,const TopoDS_Vertex& V1,const TopoDS_Vertex& V2,const Standard_Real p1,const Standard_Real p2) ;
  
  Standard_EXPORT   virtual  Standard_Boolean IsDone() const;
  //! Returns the error description when NotDone. <br>
  Standard_EXPORT     BRepBuilderAPI_EdgeError Error() const;
  
  Standard_EXPORT    const TopoDS_Edge& Edge() const;
Standard_EXPORT operator TopoDS_Edge() const;
  //! Returns the first vertex of the edge. May be Null. <br>
//! <br>
  Standard_EXPORT    const TopoDS_Vertex& Vertex1() const;
  //! Returns the second vertex of the edge. May be Null. <br>
//! <br>
  Standard_EXPORT    const TopoDS_Vertex& Vertex2() const;





protected:





private:



BRepLib_MakeEdge2d myMakeEdge2d;


};





// other Inline functions and methods (like "C++: function call" methods)


#endif