N..... USE_LENGTH_UNITS(CANON_UNITS_MM)
 N..... SET_G5X_OFFSET(1, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000)
 N..... SET_G92_OFFSET(0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000)
 N..... SET_XY_ROTATION(0.0000)
 N..... SET_FEED_REFERENCE(CANON_XYZ)
 N..... COMMENT("cut a small 1/4-20 thread and part it")
 N..... SELECT_PLANE(CANON_PLANE_XZ)
 N..... USE_LENGTH_UNITS(CANON_UNITS_INCHES)
 N..... SET_MOTION_CONTROL_MODE(CANON_CONTINUOUS, 0.000000)
 N..... SET_NAIVECAM_TOLERANCE(0.0000)
 N..... COMMENT("thread")
 N..... SELECT_POCKET(4)
 N..... START_CHANGE()
 N..... STOP_SPINDLE_TURNING()
 N..... CHANGE_TOOL(4)
 N..... USE_TOOL_LENGTH_OFFSET(0.0000 0.0000 0.7000, 0.0000 0.0000 0.0000, 0.0000 0.0000 0.0000)
 N..... SET_SPINDLE_SPEED(800.0000)
 N..... START_SPINDLE_CLOCKWISE()
 N..... DWELL(1.0000)
 N..... STRAIGHT_TRAVERSE(0.2000, 0.0000, 0.2000, 0.0000, 0.0000, 0.0000)
 N..... COMMENT("p = thread pitch, distance per revolution")
 N..... COMMENT("z = end of drive line")
 N..... COMMENT("i = offset from drive line to thread peaks")
 N..... COMMENT("negative i means the threads are at a smaller radius than the drive line,")
 N..... COMMENT("so i is negative for outside threads, positive for inside threads")
 N..... COMMENT("j = initial cut depth; subsequent depths follow degression formula")
 N..... COMMENT("r = depth degression: 1.0 = constant depth, 2.0 = constant area")
 N..... COMMENT("any number >= 1.0 allowed")
 N..... COMMENT("k = full thread depth")
 N..... COMMENT("q = "compound slide" angle")
 N..... COMMENT("h = number of spring passes")
 N..... COMMENT("e = distance along drive line used for tapered start/end")
 N..... COMMENT("l = which ends get the taper: 0 = neither, 1 = begin, 2 = end, 3 = both")
 N..... STRAIGHT_TRAVERSE(0.2370, 0.0000, 0.1955, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.1170, 0.0000, 0.1955, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.1170, 0.0000, -0.4291, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1620, 0.0000, -0.4791, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2370, 0.0000, -0.4791, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2337, 0.0000, 0.1936, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.1137, 0.0000, 0.1936, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.1137, 0.0000, -0.4309, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1587, 0.0000, -0.4809, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2337, 0.0000, -0.4809, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2311, 0.0000, 0.1922, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.1111, 0.0000, 0.1922, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.1111, 0.0000, -0.4324, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1561, 0.0000, -0.4824, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2311, 0.0000, -0.4824, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2290, 0.0000, 0.1909, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.1090, 0.0000, 0.1909, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.1090, 0.0000, -0.4336, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1540, 0.0000, -0.4836, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2290, 0.0000, -0.4836, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2271, 0.0000, 0.1899, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.1071, 0.0000, 0.1899, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.1071, 0.0000, -0.4347, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1521, 0.0000, -0.4847, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2271, 0.0000, -0.4847, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2254, 0.0000, 0.1889, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.1054, 0.0000, 0.1889, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.1054, 0.0000, -0.4356, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1504, 0.0000, -0.4856, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2254, 0.0000, -0.4856, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2238, 0.0000, 0.1880, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.1038, 0.0000, 0.1880, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.1038, 0.0000, -0.4365, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1488, 0.0000, -0.4865, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2238, 0.0000, -0.4865, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2224, 0.0000, 0.1872, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.1024, 0.0000, 0.1872, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.1024, 0.0000, -0.4373, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1474, 0.0000, -0.4873, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2224, 0.0000, -0.4873, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2210, 0.0000, 0.1864, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.1010, 0.0000, 0.1864, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.1010, 0.0000, -0.4381, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1460, 0.0000, -0.4881, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2210, 0.0000, -0.4881, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2197, 0.0000, 0.1857, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0997, 0.0000, 0.1857, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0997, 0.0000, -0.4389, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1447, 0.0000, -0.4889, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2197, 0.0000, -0.4889, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2185, 0.0000, 0.1850, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0985, 0.0000, 0.1850, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0985, 0.0000, -0.4396, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1435, 0.0000, -0.4896, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2185, 0.0000, -0.4896, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2173, 0.0000, 0.1843, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0973, 0.0000, 0.1843, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0973, 0.0000, -0.4402, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1423, 0.0000, -0.4902, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2173, 0.0000, -0.4902, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2162, 0.0000, 0.1837, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0962, 0.0000, 0.1837, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0962, 0.0000, -0.4409, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1412, 0.0000, -0.4909, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2162, 0.0000, -0.4909, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2151, 0.0000, 0.1831, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0951, 0.0000, 0.1831, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0951, 0.0000, -0.4415, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1401, 0.0000, -0.4915, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2151, 0.0000, -0.4915, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2140, 0.0000, 0.1825, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0940, 0.0000, 0.1825, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0940, 0.0000, -0.4421, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1390, 0.0000, -0.4921, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2140, 0.0000, -0.4921, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2130, 0.0000, 0.1819, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0930, 0.0000, 0.1819, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0930, 0.0000, -0.4426, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1380, 0.0000, -0.4926, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2130, 0.0000, -0.4926, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2120, 0.0000, 0.1813, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0920, 0.0000, 0.1813, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0920, 0.0000, -0.4432, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1370, 0.0000, -0.4932, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2120, 0.0000, -0.4932, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2111, 0.0000, 0.1808, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0911, 0.0000, 0.1808, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0911, 0.0000, -0.4437, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1361, 0.0000, -0.4937, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2111, 0.0000, -0.4937, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2101, 0.0000, 0.1803, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0901, 0.0000, 0.1803, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0901, 0.0000, -0.4443, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1351, 0.0000, -0.4943, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2101, 0.0000, -0.4943, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2092, 0.0000, 0.1798, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0892, 0.0000, 0.1798, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0892, 0.0000, -0.4448, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1342, 0.0000, -0.4948, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2092, 0.0000, -0.4948, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2083, 0.0000, 0.1793, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0883, 0.0000, 0.1793, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0883, 0.0000, -0.4453, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1333, 0.0000, -0.4953, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2083, 0.0000, -0.4953, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2075, 0.0000, 0.1788, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0875, 0.0000, 0.1788, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0875, 0.0000, -0.4458, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1325, 0.0000, -0.4958, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2075, 0.0000, -0.4958, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2066, 0.0000, 0.1783, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0866, 0.0000, 0.1783, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0866, 0.0000, -0.4462, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1316, 0.0000, -0.4962, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2066, 0.0000, -0.4962, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2058, 0.0000, 0.1778, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0858, 0.0000, 0.1778, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0858, 0.0000, -0.4467, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1308, 0.0000, -0.4967, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2058, 0.0000, -0.4967, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2050, 0.0000, 0.1774, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0850, 0.0000, 0.1774, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0850, 0.0000, -0.4472, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1300, 0.0000, -0.4972, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2050, 0.0000, -0.4972, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2042, 0.0000, 0.1769, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0842, 0.0000, 0.1769, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0842, 0.0000, -0.4476, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1292, 0.0000, -0.4976, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2042, 0.0000, -0.4976, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2034, 0.0000, 0.1765, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0834, 0.0000, 0.1765, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0834, 0.0000, -0.4481, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1284, 0.0000, -0.4981, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2034, 0.0000, -0.4981, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2027, 0.0000, 0.1760, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0827, 0.0000, 0.1760, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0827, 0.0000, -0.4485, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1277, 0.0000, -0.4985, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2027, 0.0000, -0.4985, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2019, 0.0000, 0.1756, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0819, 0.0000, 0.1756, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0819, 0.0000, -0.4489, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1269, 0.0000, -0.4989, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2019, 0.0000, -0.4989, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2012, 0.0000, 0.1752, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0812, 0.0000, 0.1752, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0812, 0.0000, -0.4493, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1262, 0.0000, -0.4993, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2012, 0.0000, -0.4993, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2005, 0.0000, 0.1748, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0805, 0.0000, 0.1748, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0805, 0.0000, -0.4497, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1255, 0.0000, -0.4997, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2005, 0.0000, -0.4997, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2000, 0.0000, 0.1745, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0800, 0.0000, 0.1745, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0800, 0.0000, -0.4500, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1250, 0.0000, -0.5000, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2000, 0.0000, -0.5000, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2000, 0.0000, 0.1745, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0800, 0.0000, 0.1745, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0800, 0.0000, -0.4500, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1250, 0.0000, -0.5000, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2000, 0.0000, -0.5000, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2000, 0.0000, 0.1745, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0800, 0.0000, 0.1745, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0800, 0.0000, -0.4500, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1250, 0.0000, -0.5000, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2000, 0.0000, -0.5000, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2000, 0.0000, 0.1745, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.0800, 0.0000, 0.1745, 0.0000, 0.0000, 0.0000)
 N..... DISABLE_FEED_OVERRIDE()
 N..... START_SPEED_FEED_SYNC(0.050000,0)
 N..... STRAIGHT_FEED(0.0800, 0.0000, -0.4500, 0.0000, 0.0000, 0.0000)
 N..... START_SPEED_FEED_SYNC(0.067268,0)
 N..... STRAIGHT_FEED(0.1250, 0.0000, -0.5000, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPEED_FEED_SYNCH()
 N..... STRAIGHT_TRAVERSE(0.2000, 0.0000, -0.5000, 0.0000, 0.0000, 0.0000)
 N..... ENABLE_FEED_OVERRIDE()
 N..... STRAIGHT_TRAVERSE(0.2000, 0.0000, -0.5000, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.5000, 0.0000, -0.5000, 0.0000, 0.0000, 0.0000)
 N..... STRAIGHT_TRAVERSE(0.5000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000)
 N..... STOP_SPINDLE_TURNING()
 N..... SET_G5X_OFFSET(1, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000)
 N..... SET_XY_ROTATION(0.0000)
 N..... SELECT_PLANE(CANON_PLANE_XY)
 N..... SET_FEED_MODE(0)
 N..... SET_FEED_RATE(0.0000)
 N..... STOP_SPINDLE_TURNING()
 N..... SET_SPINDLE_MODE(0.0000)
 N..... PROGRAM_END()