msgid "" msgstr "" "Project-Id-Version: de\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2012-03-10 13:39-0600\n" "PO-Revision-Date: 2012-03-11 01:15+0200\n" "Last-Translator: Jeff Epler \n" "Language-Team: German Translation Team \n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Weblate 0.5\n" #: src/hal/utils/meter.c:198 hal/utils/meter.c:181 #, c-format msgid "ERROR: '%s' is not a valid probe type\n" msgstr "FEHLER: »%s« ist kein gültiger Typ\n" #: src/hal/utils/meter.c:206 hal/utils/meter.c:189 #, c-format msgid "ERROR: no pin/signal/parameter name\n" msgstr "FEHLER: Kein Pin-, Signal- oder Parameter-Name\n" #: src/hal/utils/meter.c:212 #, c-format msgid "" "ERROR: -s option requires a probe type and a pin/signal/parameter name\n" msgstr "FEHLER: Kein Pin-, Signal- oder Parameter-Name mit -s\n" #: src/hal/utils/meter.c:238 tcl/tklinuxcnc.tcl:764 hal/utils/meter.c:229 #: ../tcl/tkemc.tcl:816 msgid "Hal Meter" msgstr "HAL-Meter" #: src/hal/utils/meter.c:287 hal/utils/meter.c:278 msgid "_Select" msgstr "_Auswahl ändern" #: src/hal/utils/meter.c:288 hal/utils/meter.c:279 msgid "E_xit" msgstr "_Beenden" #: src/hal/utils/meter.c:336 src/hal/utils/meter.c:364 hal/utils/meter.c:355 msgid "Select Item to Probe" msgstr "Element zum Anzeigen auswählen" #: src/hal/utils/meter.c:640 hal/utils/meter.c:630 msgid " _Pins " msgstr "_Pins" #: src/hal/utils/meter.c:641 hal/utils/meter.c:631 msgid " _Signals " msgstr "_Signale" #: src/hal/utils/meter.c:642 hal/utils/meter.c:632 msgid " Para_meters " msgstr "Para_meter" #: src/hal/utils/meter.c:685 hal/utils/meter.c:675 msgid "_Close" msgstr "_Schließen" #: src/hal/utils/scope.c:126 hal/utils/scope.c:130 msgid "" "Usage:\n" " halscope [-h] [-i infile] [-o outfile] [num_samples]\n" msgstr "" "Benutzung:\n" " halscope [-h] [-i Eingabedatei] [-o Ausgabedatei] [Anzahl der Samples]\n" #: src/hal/utils/scope.c:474 src/hal/utils/scope.c:501 hal/utils/scope.c:478 #: hal/utils/scope.c:505 msgid "Open Configuration File:" msgstr "Konfiguration öffnen" #: src/hal/utils/scope.c:535 hal/utils/scope.c:539 msgid "_Open Configuration..." msgstr "K_onfiguration laden..." #: src/hal/utils/scope.c:541 hal/utils/scope.c:545 msgid "_Save Configuration..." msgstr "Konfiguration _speichern..." #: src/hal/utils/scope.c:550 hal/utils/scope.c:554 msgid "O_pen Data File..." msgstr "_Daten laden..." #: src/hal/utils/scope.c:557 hal/utils/scope.c:561 msgid "S_ave Data File..." msgstr "D_aten speichern..." #: src/hal/utils/scope.c:566 share/axis/tcl/axis.tcl:93 hal/utils/scope.c:570 #: ../share/axis/tcl/axis.tcl:91 msgid "_Quit" msgstr "_Beenden" #: src/hal/utils/scope.c:572 hal/utils/scope.c:576 msgid "_About Halscope" msgstr "Über H_AL-Scope" #: src/hal/utils/scope.c:578 share/axis/tcl/axis.tcl:435 hal/utils/scope.c:582 #: ../share/axis/tcl/axis.tcl:411 msgid "_File" msgstr "_Datei" #: src/hal/utils/scope.c:582 share/axis/tcl/axis.tcl:447 hal/utils/scope.c:586 #: ../share/axis/tcl/axis.tcl:423 msgid "_Help" msgstr "_Hilfe" #: src/hal/utils/scope.c:641 hal/utils/scope.c:645 msgid "HAL Oscilloscope" msgstr "HAL-Oszilloskop" #: src/hal/utils/scope.c:669 hal/utils/scope.c:673 msgid "Horizontal" msgstr "Horizontal" #: src/hal/utils/scope.c:677 hal/utils/scope.c:681 msgid "Selected Channel" msgstr "Ausgewähler Kanal" #: src/hal/utils/scope.c:683 hal/utils/scope.c:687 msgid "Run Mode" msgstr "Modus" #: src/hal/utils/scope.c:686 hal/utils/scope.c:690 msgid "Trigger" msgstr "Trigger" #: src/hal/utils/scope.c:692 hal/utils/scope.c:696 msgid "Vertical" msgstr "Vertikal" #: src/hal/utils/scope.c:700 share/axis/tcl/axis.tcl:135 #: share/axis/tcl/axis.tcl:1199 hal/utils/scope.c:704 #: ../share/axis/tcl/axis.tcl:133 ../share/axis/tcl/axis.tcl:1156 msgid "Stop" msgstr "Stopp" #: src/hal/utils/scope.c:703 hal/utils/scope.c:707 msgid "Normal" msgstr "Normal" #: src/hal/utils/scope.c:706 hal/utils/scope.c:710 msgid "Single" msgstr "Single" #: src/hal/utils/scope.c:709 hal/utils/scope.c:713 msgid "Roll" msgstr "Roll" #: src/hal/utils/scope_horiz.c:130 hal/utils/scope_horiz.c:137 msgid "Zoom" msgstr "Zoom" #: src/hal/utils/scope_horiz.c:131 hal/utils/scope_horiz.c:138 msgid " Pos " msgstr "Pos" #: src/hal/utils/scope_horiz.c:164 hal/utils/scope_horiz.c:171 msgid "" "----- Samples\n" "at ---- KHz" msgstr "" "----- Samples\n" "bei ---- kHz" #: src/hal/utils/scope_horiz.c:459 hal/utils/scope_horiz.c:466 msgid "Realtime component not loaded" msgstr "Echtzeicht-Komponente nicht geladen" #: src/hal/utils/scope_horiz.c:460 hal/utils/scope_horiz.c:467 #, fuzzy msgid "" "HALSCOPE uses a realtime component called scope_rt'\n" "to sample signals for display. It is not currently loaded\n" "and attempting to load it automatically failed. More information\n" "may be available in the terminal where halscope was started.\n" "\n" "Please do one of the following:\n" "\n" "Load the component (using 'halcmd loadrt scope_rt'), then click 'OK'\n" "or\n" "Click 'Quit' to exit HALSCOPE" msgstr "" "HALSCOPE benutzt eine Echtzeit-Komponente namens scope_rt\n" "um Werte aufzuzeichnen. Diese wurde nicht geladen und der\n" "atomatische Versuch die Komponente zu laden schlug fehl.\n" "Weitere Informationen könnten in der Konole verfügbar sein,\n" "aus der der Befehl »halscope« gestartet wurde.\n" "\n" "Wählen Sie eine der folgenden Möglichkeiten:\n" "\n" "Laden der Komponente (mittels »halcmd loadrt scope_rt«). Wählen Sie »OK«\n" "oder\n" "wählen Sie »Beenden« um HALSCOPE zu beenden" #: hal/utils/scope_horiz.c:503 src/hal/utils/scope_horiz.c:495 msgid "Realtime function not linked" msgstr "Echtzeitfunktion nicht gelinkt" #: hal/utils/scope_horiz.c:504 src/hal/utils/scope_horiz.c:496 msgid "" "The HALSCOPE realtime sampling function\n" "must be called from a HAL thread in to\n" "determine the sampling rate.\n" "\n" "Please do one of the following:\n" "\n" "Select a thread name and multiplier then click 'OK'\n" "or\n" "Click 'Quit' to exit HALSCOPE" msgstr "" "Die HALSCOPE Echtzeit-Samplingfunktion\n" "muß aus einem HAL Thread aufgerufen werden,\n" "um die Samplingfrequenz zu ermitteln. \n" "\n" "Führen Sie eine dieser Möglichkeiten aus:\n" "Wählen Sie einen Threadnamen, einen\n" "Multiplikationsfaktor und klicken Sie \"OK\"\n" "oder\n" "klicken Sie 'Quit' um HALSCOPE zu verlassen." #: src/hal/utils/scope_horiz.c:503 hal/utils/scope_horiz.c:511 msgid "Select Sample Rate" msgstr "Abtastrate auswählen" #: src/hal/utils/scope_horiz.c:504 hal/utils/scope_horiz.c:512 #, fuzzy msgid "" "Select a thread name and multiplier then click 'OK'\n" "or\n" "Click 'Quit' to exit HALSCOPE" msgstr "" "Wählen Sie einen Tread-Namen und Vervielfacher\n" "und bestätigen Sie mit »OK«\n" "oder\n" "wählen Sie »Beenden« um HALSCOPE zu beenden\n" #: src/hal/utils/scope_horiz.c:526 hal/utils/scope_horiz.c:534 msgid "Thread:" msgstr "Thread:" #: src/hal/utils/scope_horiz.c:534 hal/utils/scope_horiz.c:542 msgid "Sample Period:" msgstr "Abtastperiode:" #: src/hal/utils/scope_horiz.c:542 hal/utils/scope_horiz.c:550 msgid "Sample Rate:" msgstr "Abtastrate:" #: src/hal/utils/scope_horiz.c:558 src/emc/usr_intf/touchy/mdi.py:78 #: hal/utils/scope_horiz.c:566 msgid "Thread" msgstr "Thread" #: src/hal/utils/scope_horiz.c:559 hal/utils/scope_horiz.c:567 msgid "Period" msgstr "Periode" #: src/hal/utils/scope_horiz.c:619 hal/utils/scope_horiz.c:627 msgid "Multiplier:" msgstr "Vervielfacher:" #: src/hal/utils/scope_horiz.c:636 hal/utils/scope_horiz.c:644 msgid "Record Length" msgstr "Länge der Aufzeichnung:" #: src/hal/utils/scope_horiz.c:639 hal/utils/scope_horiz.c:650 #, c-format msgid "%5d samples (1 channel)" msgstr "%5d Samples (1 Kanal)" #: src/hal/utils/scope_horiz.c:641 hal/utils/scope_horiz.c:653 #, c-format msgid "%5d samples (2 channels)" msgstr "%5d Samples (2 Kanäle)" #: src/hal/utils/scope_horiz.c:645 hal/utils/scope_horiz.c:657 #, c-format msgid "%5d samples (4 channels)" msgstr "%5d Samples (4 Kanäle)" #: src/hal/utils/scope_horiz.c:649 hal/utils/scope_horiz.c:661 #, c-format msgid "%5d samples (8 channels)" msgstr "%5d Samples (8 Kanäle)" #: src/hal/utils/scope_horiz.c:653 hal/utils/scope_horiz.c:665 #, c-format msgid "%5d samples (16 channels)" msgstr "%5d Samples (16 Kanäle)" #: src/hal/utils/scope_horiz.c:708 src/hal/utils/scope_horiz.c:754 #: src/hal/utils/scope_horiz.c:966 src/hal/utils/scope_vert.c:761 #: src/hal/utils/scope_vert.c:853 tcl/bin/emccalib.tcl:227 #: tcl/bin/genedit.tcl:180 tcl/bin/genedit.tcl:450 tcl/bin/halconfig.tcl:682 #: tcl/bin/halconfig.tcl:733 tcl/bin/pickconfig.tcl:257 #: tcl/bin/pickconfig.tcl:479 tcl/bin/pickconfig.tcl:506 tcl/mini.tcl:1456 #: tcl/mini.tcl:2937 tcl/tklinuxcnc.tcl:160 tcl/tklinuxcnc.tcl:245 #: tcl/tklinuxcnc.tcl:419 tcl/tklinuxcnc.tcl:1338 tcl/tklinuxcnc.tcl:1407 #: tcl/tklinuxcnc.tcl:1438 tcl/tklinuxcnc.tcl:1469 tcl/tklinuxcnc.tcl:2017 #: tcl/tklinuxcnc.tcl:2036 tcl/tklinuxcnc.tcl:2055 tcl/tklinuxcnc.tcl:2102 #: src/emc/usr_intf/axis/scripts/axis.py:1069 #: src/emc/usr_intf/axis/scripts/axis.py:1129 #: src/emc/usr_intf/axis/scripts/axis.py:1445 #: src/emc/usr_intf/axis/scripts/axis.py:2464 #: src/emc/usr_intf/axis/scripts/axis.py:3320 #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:718 #: lib/python/propertywindow.py:34 share/axis/tcl/axis.tcl:1720 #: share/axis/tcl/axis.tcl:1757 src/emc/usr_intf/axis/scripts/axis.py:1077 #: src/emc/usr_intf/axis/scripts/axis.py:1141 #: src/emc/usr_intf/axis/scripts/axis.py:1458 #: src/emc/usr_intf/axis/scripts/axis.py:2477 #: src/emc/usr_intf/axis/scripts/axis.py:3336 hal/utils/scope_horiz.c:720 #: hal/utils/scope_horiz.c:766 hal/utils/scope_horiz.c:981 #: hal/utils/scope_vert.c:763 hal/utils/scope_vert.c:855 #: ../tcl/bin/emccalib.tcl:227 ../tcl/bin/genedit.tcl:180 #: ../tcl/bin/genedit.tcl:450 ../tcl/bin/halconfig.tcl:682 #: ../tcl/bin/halconfig.tcl:733 ../tcl/bin/pickconfig.tcl:252 #: ../tcl/bin/pickconfig.tcl:401 ../tcl/bin/pickconfig.tcl:426 #: ../tcl/mini.tcl:1456 ../tcl/mini.tcl:2934 ../tcl/tkemc.tcl:215 #: ../tcl/tkemc.tcl:318 ../tcl/tkemc.tcl:464 ../tcl/tkemc.tcl:1379 #: ../tcl/tkemc.tcl:1448 ../tcl/tkemc.tcl:1479 ../tcl/tkemc.tcl:1510 #: ../tcl/tkemc.tcl:2058 ../tcl/tkemc.tcl:2077 ../tcl/tkemc.tcl:2096 #: ../tcl/tkemc.tcl:2143 emc/usr_intf/axis/scripts/axis.py:1955 #: emc/usr_intf/axis/scripts/axis.py:2013 #: emc/usr_intf/axis/scripts/axis.py:2268 #: emc/usr_intf/axis/scripts/axis.py:3332 #: emc/usr_intf/axis/scripts/axis.py:4080 #: emc/usr_intf/axis/scripts/image-to-gcode.py:709 #: ../lib/python/propertywindow.py:34 ../share/axis/tcl/axis.tcl:1676 #: ../share/axis/tcl/axis.tcl:1713 msgid "OK" msgstr "OK" #: src/hal/utils/scope_horiz.c:713 src/hal/utils/scope_horiz.c:754 #: tcl/bin/emccalib.tcl:91 tcl/bin/halconfig.tcl:103 #: hal/utils/scope_horiz.c:725 hal/utils/scope_horiz.c:766 #: ../tcl/bin/emccalib.tcl:91 ../tcl/bin/halconfig.tcl:103 msgid "Quit" msgstr "Beenden" #: hal/utils/scope_horiz.c:757 src/hal/utils/scope_horiz.c:745 msgid "Realtime thread(s) not running" msgstr "Echtzeit-Thread ist nicht gestarted" #: hal/utils/scope_horiz.c:758 src/hal/utils/scope_horiz.c:746 msgid "" "HALSCOPE uses code in a realtime HAL thread to sample\n" "signals for display. The HAL thread(s) are not running.\n" "Threads are usually started by the application you are\n" "attempting to run, or you can use the 'halcmd start' command.\n" "\n" "Please do one of the following:\n" "\n" "Start the threads, then click 'OK'\n" "or\n" "Click 'Quit' to exit HALSCOPE" msgstr "" "HALSCOPE benutzt HAL-Echtzeitkomponenten, um \n" "Signale für die Darstellung abzutasten. Die HAL threads\n" "sind nicht geladen. Threads werden normalerweise \n" "von der Anwendung geladen, die Sie starten wollen,\n" "oder können mit 'halcmd start' aufgerufen werden.\n" "\n" "Sie haben diese Möglichkeiten:\n" "\n" "Sie starten die Threads und klicken 'OK'\n" "oder\n" "klicken Sie 'Quit', um HALSCOPE zu verlassen." #: hal/utils/scope_horiz.c:791 src/hal/utils/scope_horiz.c:779 msgid "Pick log file to write to:" msgstr "Wählen Sie eine Log-Datei zum Speichern:" #: src/hal/utils/scope_horiz.c:962 hal/utils/scope_horiz.c:977 msgid "Not enough channels" msgstr "Nicht genügend Kanäle" #: hal/utils/scope_horiz.c:978 src/hal/utils/scope_horiz.c:963 msgid "" "This record length cannot handle the channels\n" "that are currently enabled. Pick a shorter\n" "record length that supports more channels." msgstr "" "Diese Datensatzlänge kann nicht alle\n" "Kanäle verarbeiten wie momentan aktiv\n" "sind. Wählen Sie einen kürzeren Wert,\n" "um mehr Kanäle zu unterstützen." #: src/hal/utils/scope_horiz.c:1051 hal/utils/scope_horiz.c:1066 #, fuzzy, c-format msgid "" "%s\n" "per div" msgstr "" "%s\n" "pro Teilstrich" #: src/hal/utils/scope_horiz.c:1066 hal/utils/scope_horiz.c:1081 #, c-format msgid "" "%s samples\n" "at %s" msgstr "" "%s Samples\n" "bei %s" #: src/hal/utils/scope_horiz.c:1170 hal/utils/scope_horiz.c:1185 msgid "nSec" msgstr "ns" #: src/hal/utils/scope_horiz.c:1173 hal/utils/scope_horiz.c:1188 msgid "uSec" msgstr "µs" #: src/hal/utils/scope_horiz.c:1177 hal/utils/scope_horiz.c:1192 msgid "mSec" msgstr "ms" #: src/hal/utils/scope_horiz.c:1181 #: src/emc/usr_intf/pncconf/pncconf.glade:1953 #: src/emc/usr_intf/pncconf/pncconf.glade:2825 #: src/emc/usr_intf/pncconf/pncconf.glade:3706 #: src/emc/usr_intf/pncconf/pncconf.glade:4587 hal/utils/scope_horiz.c:1196 msgid "Sec" msgstr "s" #: src/hal/utils/scope_horiz.c:1198 #: src/emc/usr_intf/stepconf/stepconf.glade:3664 #: src/emc/usr_intf/stepconf/stepconf.glade:4040 #: src/emc/usr_intf/pncconf/pncconf.glade:8268 #: src/emc/usr_intf/pncconf/pncconf.glade:8281 #: src/emc/usr_intf/pncconf/pncconf.glade:8458 hal/utils/scope_horiz.c:1213 #: emc/usr_intf/stepconf/stepconf.glade:2459 #: emc/usr_intf/stepconf/stepconf.glade:3142 #: emc/usr_intf/pncconf/pncconf.glade:15953 #: emc/usr_intf/pncconf/pncconf.glade:18084 msgid "Hz" msgstr "Hz" #: src/hal/utils/scope_horiz.c:1201 hal/utils/scope_horiz.c:1216 msgid "KHz" msgstr "kHz" #: src/hal/utils/scope_horiz.c:1205 hal/utils/scope_horiz.c:1220 msgid "Mhz" msgstr "MHz" #: src/hal/utils/scope_vert.c:403 src/hal/utils/scope_vert.c:1258 #: hal/utils/scope_vert.c:409 hal/utils/scope_vert.c:1260 #, c-format msgid "" "Offset\n" "%s" msgstr "" "Offset\n" "%s" #: src/hal/utils/scope_vert.c:618 hal/utils/scope_vert.c:620 msgid "Gain" msgstr "Gain" #: src/hal/utils/scope_vert.c:630 src/hal/utils/scope_trig.c:252 #: hal/utils/scope_vert.c:632 hal/utils/scope_trig.c:259 msgid "Pos" msgstr "Pos" #: src/hal/utils/scope_vert.c:644 tcl/ngcgui_ttt.tcl:214 #: src/emc/usr_intf/pncconf/pncconf.glade:57147 hal/utils/scope_vert.c:646 msgid "Scale" msgstr "Scale" #: src/hal/utils/scope_vert.c:657 hal/utils/scope_vert.c:659 msgid "Chan Off" msgstr "Kan. aus" #: src/hal/utils/scope_vert.c:713 hal/utils/scope_vert.c:715 msgid "Set Offset" msgstr "Offset setzen" #: src/hal/utils/scope_vert.c:714 hal/utils/scope_vert.c:716 #, c-format msgid "" "Set the vertical offset\n" "for channel %d." msgstr "" "Vertikaler Offset\n" "für Kanal %d" #: src/hal/utils/scope_vert.c:734 hal/utils/scope_vert.c:736 msgid "AC Coupled" msgstr "AC-Kopplung" #: src/hal/utils/scope_vert.c:769 src/hal/utils/scope_vert.c:1171 #: src/hal/utils/scope_trig.c:367 tcl/bin/emccalib.tcl:229 #: tcl/bin/genedit.tcl:294 tcl/bin/halconfig.tcl:103 tcl/bin/halconfig.tcl:684 #: tcl/bin/halconfig.tcl:735 tcl/bin/pickconfig.tcl:260 #: tcl/bin/pickconfig.tcl:369 tcl/mini.tcl:1457 tcl/mini.tcl:2938 #: tcl/mini.tcl:3110 tcl/tklinuxcnc.tcl:162 tcl/tklinuxcnc.tcl:213 #: tcl/tklinuxcnc.tcl:420 tcl/tklinuxcnc.tcl:1339 tcl/tklinuxcnc.tcl:1408 #: tcl/tklinuxcnc.tcl:1439 tcl/tklinuxcnc.tcl:1470 tcl/tklinuxcnc.tcl:2103 #: src/emc/usr_intf/axis/scripts/axis.py:1391 #: src/emc/usr_intf/axis/scripts/axis.py:1446 #: src/emc/usr_intf/axis/scripts/axis.py:1633 #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:720 #: src/emc/usr_intf/axis/scripts/axis.py:1404 #: src/emc/usr_intf/axis/scripts/axis.py:1459 #: src/emc/usr_intf/axis/scripts/axis.py:1646 hal/utils/scope_vert.c:771 #: hal/utils/scope_vert.c:1173 hal/utils/scope_trig.c:378 #: ../tcl/bin/emccalib.tcl:229 ../tcl/bin/genedit.tcl:294 #: ../tcl/bin/halconfig.tcl:103 ../tcl/bin/halconfig.tcl:684 #: ../tcl/bin/halconfig.tcl:735 ../tcl/bin/pickconfig.tcl:255 #: ../tcl/bin/pickconfig.tcl:366 ../tcl/mini.tcl:1457 ../tcl/mini.tcl:2935 #: ../tcl/mini.tcl:3107 ../tcl/tkemc.tcl:217 ../tcl/tkemc.tcl:260 #: ../tcl/tkemc.tcl:286 ../tcl/tkemc.tcl:465 ../tcl/tkemc.tcl:1380 #: ../tcl/tkemc.tcl:1449 ../tcl/tkemc.tcl:1480 ../tcl/tkemc.tcl:1511 #: ../tcl/tkemc.tcl:2144 emc/usr_intf/axis/scripts/axis.py:2269 #: emc/usr_intf/axis/scripts/axis.py:2458 #: emc/usr_intf/axis/scripts/image-to-gcode.py:711 msgid "Cancel" msgstr "Abbrechen" #: src/hal/utils/scope_vert.c:849 hal/utils/scope_vert.c:851 msgid "Too many channels" msgstr "Zu viele Kanäle" #: hal/utils/scope_vert.c:852 src/hal/utils/scope_vert.c:850 msgid "" "You cannot add another channel.\n" "\n" "Either turn off one or more channels, or shorten\n" "the record length to allow for more channels" msgstr "" "Kein weiterer Kanal möglich.\n" "\n" "Einen oder mehrere Kanäle abschalten \n" "oder die Datensatzlänge verkleinern,\n" "um mehr Kanäle zu ermöglichen." #: src/hal/utils/scope_vert.c:1026 hal/utils/scope_vert.c:1028 msgid "Select Channel Source" msgstr "Kanal-Quelle auswählen" #: src/hal/utils/scope_vert.c:1027 hal/utils/scope_vert.c:1029 #, c-format msgid "" "Select a pin, signal, or parameter\n" "as the source for channel %d." msgstr "" "Einen Pin, ein Signal oder einen Parameter\n" "als Quelle für den Kanal %d wählen." #: src/hal/utils/scope_vert.c:1059 hal/utils/scope_vert.c:1061 msgid "Pins" msgstr "Pins" #: src/hal/utils/scope_vert.c:1060 hal/utils/scope_vert.c:1062 msgid "Signals" msgstr "Signale" #: src/hal/utils/scope_vert.c:1061 hal/utils/scope_vert.c:1063 msgid "Parameters" msgstr "Parameter" #: src/hal/utils/scope_trig.c:110 hal/utils/scope_trig.c:117 #, c-format msgid "Falling" msgstr "Fallende" #: src/hal/utils/scope_trig.c:112 src/hal/utils/scope_trig.c:275 #: hal/utils/scope_trig.c:119 hal/utils/scope_trig.c:282 #, c-format msgid "Rising" msgstr "Steigende" #: src/hal/utils/scope_trig.c:119 src/hal/utils/scope_trig.c:283 #: hal/utils/scope_trig.c:126 hal/utils/scope_trig.c:290 msgid "" "Source\n" "None" msgstr "" "Quelle:\n" "Keine" #: src/hal/utils/scope_trig.c:124 hal/utils/scope_trig.c:131 #, c-format msgid "" "Source\n" "Chan %2d" msgstr "" "Quelle:\n" "Kanal %2d" #: src/hal/utils/scope_trig.c:199 tcl/tklinuxcnc.tcl:827 #: src/emc/usr_intf/touchy/touchy.glade:2469 hal/utils/scope_trig.c:206 #: ../tcl/tkemc.tcl:879 msgid "Auto" msgstr "Auto" #: hal/utils/scope_trig.c:208 src/hal/utils/scope_trig.c:201 msgid "Force" msgstr "Zwang" #: hal/utils/scope_trig.c:242 hal/utils/scope_trig.c:276 #: src/hal/utils/scope_trig.c:235 src/hal/utils/scope_trig.c:269 msgid "Level" msgstr "Schwelle" #: src/hal/utils/scope_trig.c:303 hal/utils/scope_trig.c:314 msgid "Trigger Source" msgstr "Trigger-Quelle" #: src/hal/utils/scope_trig.c:304 hal/utils/scope_trig.c:315 msgid "Select a channel to use for triggering." msgstr "Einen Kanal als Trigger-Quelle wählen." #: src/hal/utils/scope_trig.c:327 hal/utils/scope_trig.c:338 msgid "Chan" msgstr "Kanal" #: src/hal/utils/scope_trig.c:328 hal/utils/scope_trig.c:339 msgid "Source" msgstr "Quelle" #: src/emc/motion/control.c:261 msgid "Unexpected realtime delay: check dmesg for details." msgstr "" "Unerwartete Echtzeitverzögerung.\n" "Details stehen in dmesg." #: src/emc/motion/control.c:263 #, c-format msgid "" "\n" "In recent history there were\n" "%ld, %ld, %ld, %ld, and %ld\n" "elapsed clocks between calls to the motion controller.\n" msgstr "" "\n" "In der letzten Zeit sind \n" "%ld,%ld,%ld,%ld und %ld\n" "Clockimpulse zwischen den Impulsen an \n" "die Motorsteuerung ausgefallen.\n" #: src/emc/motion/control.c:268 #, c-format msgid "" "This time, there were %ld which is so anomalously\n" "large that it probably signifies a problem with your\n" "realtime configuration. For the rest of this run of\n" "EMC, this message will be suppressed.\n" "\n" msgstr "" "Dieses Mal waren es %ld, also unnormal viele,\n" "was auf ein Problem mit Ihrer Echtzeitkon-\n" "figuration hinweist. Für die Restlaufzeit\n" "von EMC wird diese Meldung unterdrückt.\n" #: src/emc/motion/control.c:384 msgid "G38.4 move finished without breaking contact." msgstr "G38.4: Bewegung ohne Kontaktöffnung beendet." #: src/emc/motion/control.c:387 msgid "G38.2 move finished without making contact." msgstr "G38.4: Bewegung ohne Kontaktschließung beendet." #: src/emc/motion/control.c:401 msgid "Probe tripped during non-probe MDI command." msgstr "Tastspitze bei inaktivem MDI-Befehl ausgelöst." #: src/emc/motion/control.c:429 msgid "Probe tripped during homing motion." msgstr "Tastspitze bei Referenzfahrt ausgelöst." #: src/emc/motion/control.c:433 msgid "Probe tripped during a jog." msgstr "Tastspitze bei Eilfahrt ausgelöst." #: src/emc/motion/control.c:697 src/emc/motion/control.c:718 msgid "motion stopped by enable input" msgstr "Bewegung durch Enable-Eingabe angehalten." #: src/emc/motion/control.c:720 src/emc/motion/control.c:741 #, c-format msgid "joint %d on limit switch error" msgstr "Fehler: Joint %d am Endschalter" #: src/emc/motion/control.c:732 src/emc/motion/control.c:753 #, c-format msgid "joint %d amplifier fault" msgstr "Verstärkerfehler an Joint %d" #: src/emc/motion/control.c:741 src/emc/motion/control.c:762 #, c-format msgid "joint %d following error" msgstr "" #: src/emc/motion/control.c:1423 src/emc/motion/control.c:1444 #, c-format msgid "Exceeded positive soft limit on joint %d" msgstr "Positiver Softanschlag bei Joint %d überschritten" #: src/emc/motion/control.c:1428 src/emc/motion/control.c:1449 #, c-format msgid "Exceeded negative soft limit on joint %d" msgstr "Negativer Softanschlag bei Joint %d überschritten" #: src/emc/motion/command.c:159 #, c-format msgid "Can't jog invalid joint number %d." msgstr "Kann ungültigen Joint %d nicht bewegen" #: src/emc/motion/command.c:163 #, c-format msgid "Can't jog joint %d further past max hard limit." msgstr "Kann Joint %d nicht weiter über Bahnmaximum bewegen" #: src/emc/motion/command.c:168 #, c-format msgid "Can't jog joint %d further past min hard limit." msgstr "Kann Joint %d nicht über Bahnminimum bewegen" #: src/emc/motion/command.c:174 #, c-format msgid "Can't jog joint %d further past max soft limit." msgstr "Kann Joint %d nicht über max. Softanschlag bewegen" #: src/emc/motion/command.c:179 #, c-format msgid "Can't jog joint %d further past min soft limit." msgstr "Kann Joint %d nicht über min. Softanschlag bewegen" #: src/emc/motion/command.c:237 #, c-format msgid "%s move on line %d would exceed joint %d's positive limit" msgstr "Bewegung %s in Zeile %d würde pos. Anschlag von Joint %d überschreiten" #: src/emc/motion/command.c:240 #, c-format msgid "%s move in MDI would exceed joint %d's positive limit" msgstr "Bewegung %s in MDI würde pos. Anschlag von Joint %d überschreiten" #: src/emc/motion/command.c:247 #, c-format msgid "%s move on line %d would exceed joint %d's negative limit" msgstr "Bewegung %s in Zeile %d würde neg. Anschlag von Joint %d überschreiten" #: src/emc/motion/command.c:250 #, c-format msgid "%s move in MDI would exceed joint %d's negative limit" msgstr "Bewegung %s in MDI würde neg. Anschlag von Joint %d überschreiten" #: src/emc/motion/command.c:500 msgid "all joints must be homed before going into coordinated mode" msgstr "" #: src/emc/motion/command.c:521 msgid "all joints must be homed before going into teleop mode" msgstr "" #: src/emc/motion/command.c:675 src/emc/motion/command.c:741 #: src/emc/motion/command.c:814 msgid "Can't jog joint in coordinated mode." msgstr "" #: src/emc/motion/command.c:680 src/emc/motion/command.c:746 #: src/emc/motion/command.c:819 msgid "Can't jog joint when not enabled." msgstr "" #: src/emc/motion/command.c:685 src/emc/motion/command.c:824 msgid "Can't jog any joints while homing." msgstr "Keine Handsteuerung während der Referenzfahrt." #: src/emc/motion/command.c:751 msgid "Can't jog any joint while homing." msgstr "Keine Handsteuerung während der Referenzfahrt." #: src/emc/motion/command.c:881 msgid "need to be enabled, in coord mode for linear move" msgstr "" #: src/emc/motion/command.c:891 msgid "can't do linear move with limits exceeded" msgstr "Keine Linearbewegung jenseits der Grenzen" #: src/emc/motion/command.c:910 msgid "can't add linear move" msgstr "Keine zusätzl. Linearbewegung möglich" #: src/emc/motion/command.c:930 msgid "need to be enabled, in coord mode for circular move" msgstr "" #: src/emc/motion/command.c:940 msgid "can't do circular move with limits exceeded" msgstr "Keine Kreisbewegung jenseits der Grenzen" #: src/emc/motion/command.c:958 msgid "can't add circular move" msgstr "Keine zusätzl. Kreisbewegung möglich" #: src/emc/motion/command.c:1048 msgid "MOTION: can't STEP while already executing" msgstr "MOTION: bereits begonnen, STEP nicht möglich" #: src/emc/motion/command.c:1140 msgid "can't enable motion, enable input is false" msgstr "Bewegung nicht möglich, Enable-Eingang ist falsch" #: src/emc/motion/command.c:1213 msgid "must be in joint mode to home" msgstr "Referenzfahrt nur im Joint-Modus möglich" #: src/emc/motion/command.c:1224 src/emc/motion/command.c:1235 msgid "homing sequence already in progress" msgstr "Referenzfahrt bereits begonnen" #: src/emc/motion/command.c:1233 msgid "homing already in progress" msgstr "Referenzfahrt bereits begonnen" #: src/emc/motion/command.c:1263 msgid "must be in joint mode or disabled to unhome" msgstr "" "Kann nur im Joint-Modus oder abgeschaltet aus der Referenzpos. gefahren " "werden" #: src/emc/motion/command.c:1275 src/emc/motion/command.c:1298 #, c-format msgid "Cannot unhome while homing, joint %d" msgstr "" "Joint %d: Während Referenzfahrt kann nicht aus der Referenzpos. gefahren " "werden" #: src/emc/motion/command.c:1279 src/emc/motion/command.c:1302 #, c-format msgid "Cannot unhome while moving, joint %d" msgstr "" "Joint %d: Während der Bewegung kann nicht aus der Referenzpos. gefahren " "werden" #: src/emc/motion/command.c:1307 #, c-format msgid "Cannot unhome inactive joint %d" msgstr "Inaktiver Joint %d kann nicht aus der Referenzpos. gefahren werden" #: src/emc/motion/command.c:1311 #, c-format msgid "Cannot unhome invalid joint %d (max %d)" msgstr "" "Joint %d: Ungültiger Joint kann nicht aus der Referenzpos. gefahren werden " "(max. %d)" #: src/emc/motion/command.c:1338 msgid "need to be enabled, in coord mode for probe move" msgstr "" #: src/emc/motion/command.c:1348 msgid "can't do probe move with limits exceeded" msgstr "Kann Tastspitze nicht außerhalb der Grenzen bewegen" #: src/emc/motion/command.c:1362 msgid "Probe is already clear when starting G38.4 or G38.5 move" msgstr "Tastspitze schon abgehoben bei Start durch G38.4 oder G38.5" #: src/emc/motion/command.c:1364 msgid "Probe is already tripped when starting G38.2 or G38.3 move" msgstr "Tastspitze schon ausgelöst bei Start durch G38.4 oder G38.5" #: src/emc/motion/command.c:1376 msgid "can't add probe move" msgstr "Keine weitere Bewegung der Tastspitze möglich" #: src/emc/motion/command.c:1400 msgid "need to be enabled, in coord mode for rigid tap move" msgstr "Muß aktiviert werden, im Koordinatenmodus für Gewindebohren" #: src/emc/motion/command.c:1410 msgid "can't do rigid tap move with limits exceeded" msgstr "Kein Gewindebohren außerhalb der Grenzen" #: src/emc/motion/command.c:1421 msgid "can't add rigid tap move" msgstr "Gewindebohren: keine weitere Bewegung möglich" #: src/emc/motion/command.c:1435 msgid "need to be enabled, in teleop mode for teleop move" msgstr "" #: src/emc/motion/command.c:1556 src/emc/motion/command.c:1605 #, c-format msgid "joint %d: too many compensation entries" msgstr "Joint %d: zu viele Kompensationseingaben" #: src/emc/motion/command.c:1562 src/emc/motion/command.c:1611 #, c-format msgid "joint %d: compensation values must increase" msgstr "Joint %d: Kompensationswerte müssen ansteigen" #: src/emc/motion/command.c:1591 src/emc/motion/command.c:1640 #, c-format msgid "unrecognized command %d" msgstr "Unerkannter Befehl %d" #: src/emc/motion/motion.c:185 msgid "MOTION: hal_init() failed\n" msgstr "MOTION: hal_init fehlgeschlagen\n" #: src/emc/motion/motion.c:190 #, c-format msgid "MOTION: num_joints is %d, must be between 1 and %d\n" msgstr "MOTION: num_joints ist %d, muß zwischen 1 und %d liegen\n" #: src/emc/motion/motion.c:197 #, c-format msgid "MOTION: num_dio is %d, must be between 1 and %d\n" msgstr "MOTION: num_dio ist %d, muß zwischen 1 und %d liegen\n" #: src/emc/motion/motion.c:204 #, c-format msgid "MOTION: num_aio is %d, must be between 1 and %d\n" msgstr "MOTION: num_aio ist %d, muß zwischen 1 und %d liegen\n" #: src/emc/motion/motion.c:212 msgid "MOTION: init_hal_io() failed\n" msgstr "MOTION: init_hal_io() fehlgeschlagen\n" #: src/emc/motion/motion.c:221 msgid "MOTION: init_comm_buffers() failed\n" msgstr "MOTION: init_comm_buffers() fehlgeschlagen\n" #: src/emc/motion/motion.c:229 msgid "MOTION: init_threads() failed\n" msgstr "MOTION: init_threads() fehlgeschlagen\n" #: src/emc/motion/motion.c:254 #, c-format msgid "MOTION: hal_stop_threads() failed, returned %d\n" msgstr "MOTION: hal_stop_threads() fehlgeschlagen, Rückgabewert %d\n" #: src/emc/motion/motion.c:260 #, c-format msgid "MOTION: rtapi_shmem_delete() failed, returned %d\n" msgstr "MOTION: rtapi_shmem_delete() fehlgeschlagen, Rückgabewert %d\n" #: src/emc/motion/motion.c:266 #, c-format msgid "MOTION: hal_exit() failed, returned %d\n" msgstr "MOTION: hal_exit() fehlgeschlagen, Rückgabewert %d\n" #: src/emc/motion/motion.c:289 msgid "MOTION: emcmot_hal_data malloc failed\n" msgstr "MOTION: emcmot_hal_data malloc fehlgeschlagen\n" #: src/emc/motion/motion.c:585 src/emc/motion/motion.c:597 #, c-format msgid "MOTION: joint %d pin/param export failed\n" msgstr "MOTION: Joint %d Pin/Parameterexport fehlgeschlagen\n" #: src/emc/motion/homing.c:80 src/emc/motion/homing.c:748 #, c-format msgid "hit limit in home state %d" msgstr "Grenze im Referenzstatus erreicht %d" #: src/emc/motion/homing.c:90 #, c-format msgid "end of move in home state %d" msgstr "Bewegungsende im Referenzstatus %d" #: src/emc/motion/homing.c:185 #, c-format msgid "unknown state '%d' during homing sequence" msgstr "Unbekannter Zustand '%d' bei Referenzfahrt" #: src/emc/motion/homing.c:246 msgid "Cannot home while shared home switch is closed" msgstr "Keine Referenzfahrt bei geschlossenem gemeinsamem Endschalter" #: src/emc/motion/homing.c:290 msgid "" "invalid homing config: non-zero LATCH_VEL needs either SEARCH_VEL or " "USE_INDEX" msgstr "" "Ungültige Referenz-Konfiguration: LATCH_VEL ungleich Null braucht SEARCH_VEL " "oder USE_INDEX" #: src/emc/motion/homing.c:299 msgid "invalid homing config: non-zero SEARCH_VEL needs LATCH_VEL" msgstr "" "Ungültige Referenz-Konfiguration: SEARCH_VEL ungleich Null braucht LATCH_VEL" #: src/emc/motion/homing.c:447 msgid "Home switch inactive before start of backoff move" msgstr "Referenzschalter inaktiv vor der Rückbewegung" #: src/emc/motion/homing.c:495 msgid "Home switch active before start of latch move" msgstr "" #: src/emc/motion/homing.c:551 msgid "Home switch inactive before start of latch move" msgstr "" #: src/emc/motion/homing.c:797 #, c-format msgid "unknown state '%d' during homing" msgstr "Unbekannter Zustand '%d' während Referenzfahrt" #: tcl/bin/emccalib.tcl:80 msgid "LinuxCNC Servo Axis Calibration" msgstr "LinuxCNC Servoachsen-Kalibrierung" #: tcl/bin/emccalib.tcl:90 ../tcl/bin/emccalib.tcl:90 msgid "Save To File" msgstr "Speichern" #: tcl/bin/emccalib.tcl:106 tcl/bin/genedit.tcl:77 tcl/bin/halconfig.tcl:151 #: tcl/bin/halshow.tcl:86 tcl/mini.tcl:2516 tcl/tklinuxcnc.tcl:719 #: tcl/ngcgui.tcl:549 tcl/bin/halshow.tcl:85 ../tcl/bin/emccalib.tcl:106 #: ../tcl/bin/genedit.tcl:77 ../tcl/bin/halconfig.tcl:151 ../tcl/mini.tcl:2513 #: ../tcl/tkemc.tcl:772 msgid "File" msgstr "Datei" #: tcl/bin/emccalib.tcl:108 tcl/bin/emccalib.tcl:231 tcl/bin/halconfig.tcl:153 #: tcl/mini.tcl:3558 src/emc/usr_intf/touchy/touchy.glade:2420 #: ../tcl/bin/emccalib.tcl:108 ../tcl/bin/emccalib.tcl:231 #: ../tcl/bin/halconfig.tcl:153 ../tcl/mini.tcl:3555 msgid "Refresh" msgstr "Aktualisieren" #: tcl/bin/emccalib.tcl:110 tcl/bin/genedit.tcl:82 tcl/bin/halconfig.tcl:155 #: tcl/mini.tcl:2535 ../tcl/bin/emccalib.tcl:110 ../tcl/bin/genedit.tcl:82 #: ../tcl/bin/halconfig.tcl:155 ../tcl/mini.tcl:2532 msgid "Save" msgstr "Speichern" #: tcl/bin/emccalib.tcl:159 tcl/bin/halconfig.tcl:623 #: ../tcl/bin/emccalib.tcl:159 ../tcl/bin/halconfig.tcl:623 #, fuzzy, tcl-format msgid "Tune %d" msgstr "Feineinstellung %d" #: tcl/bin/emccalib.tcl:160 tcl/bin/halconfig.tcl:628 #: ../tcl/bin/emccalib.tcl:161 ../tcl/bin/halconfig.tcl:628 msgid "INI Name" msgstr "INI-Name" #: tcl/bin/emccalib.tcl:161 tcl/bin/halconfig.tcl:629 #: ../tcl/bin/emccalib.tcl:162 ../tcl/bin/halconfig.tcl:629 msgid "HAL's Value" msgstr "HAL-Wert" #: tcl/bin/emccalib.tcl:163 tcl/bin/halconfig.tcl:631 #: ../tcl/bin/emccalib.tcl:164 ../tcl/bin/halconfig.tcl:631 msgid "Next Value" msgstr "Nächster Wert" #: tcl/bin/emccalib.tcl:225 tcl/bin/halconfig.tcl:680 #: tcl/bin/halconfig.tcl:731 ../tcl/bin/emccalib.tcl:225 #: ../tcl/bin/halconfig.tcl:680 ../tcl/bin/halconfig.tcl:731 msgid "Test" msgstr "Ausprobieren" #: tcl/bin/emccalib.tcl:358 tcl/bin/halconfig.tcl:883 #: ../tcl/bin/emccalib.tcl:358 ../tcl/bin/halconfig.tcl:883 #, fuzzy, tcl-format msgid "" "The HAL parameter \n" " %s \n" " has changed. \n" " Really quit?" msgstr "" "Der HAL-Parameter \n" "»%s« \n" "wurde geändert. \n" "Wirklich beenden?" #: tcl/bin/emccalib.tcl:383 tcl/bin/halconfig.tcl:1170 #: ../tcl/bin/emccalib.tcl:383 ../tcl/bin/halconfig.tcl:1170 msgid "" "Not permitted to save here.\n" "\n" " You need to copy a configuration to your home directory and work there." msgstr "" "Sie sind nicht berechtigt hier zu speichern.\n" "\n" "Kopieren Sie eine Konfiguration in Ihr »home«-Verzeichnis, um damit zu " "arbeiten." #: tcl/bin/emccalib.tcl:457 tcl/bin/genedit.tcl:211 tcl/bin/halconfig.tcl:1242 #: tcl/bin/pickconfig.tcl:544 tcl/bin/pickconfig.tcl:555 #: tcl/scripts/Set_Coordinates.tcl:205 tcl/scripts/Set_Coordinates.tcl:228 #: ../tcl/bin/emccalib.tcl:457 ../tcl/bin/genedit.tcl:211 #: ../tcl/bin/halconfig.tcl:1242 ../tcl/bin/pickconfig.tcl:464 #: ../tcl/bin/pickconfig.tcl:475 ../tcl/scripts/Set_Coordinates.tcl:201 #: ../tcl/scripts/Set_Coordinates.tcl:224 #, tcl-format msgid "can't save %s" msgstr "Die Datei »%s« konnte nicht gespeichert werden." #: tcl/bin/emcdebug.tcl:166 tcl/bin/emcdebug.tcl:177 msgid "LinuxCNC Debug" msgstr "LinuxCNC Debug" #: tcl/bin/emcdebug.tcl:185 ../tcl/bin/emcdebug.tcl:185 msgid "Invalid INI file entries" msgstr "Ungültige Einträge in der INI-Datei" #: tcl/bin/emcdebug.tcl:186 ../tcl/bin/emcdebug.tcl:186 msgid "Configuration information" msgstr "Konfigurationsinformationen" #: tcl/bin/emcdebug.tcl:187 ../tcl/bin/emcdebug.tcl:187 #, fuzzy msgid "Use of defaults" msgstr "Benutzen der Standardwerte" #: tcl/bin/emcdebug.tcl:188 ../tcl/bin/emcdebug.tcl:188 msgid "Version information" msgstr "Versionsinformationen" #: tcl/bin/emcdebug.tcl:189 ../tcl/bin/emcdebug.tcl:189 msgid "Command issuing" msgstr "Betroffener Befehl" #: tcl/bin/emcdebug.tcl:190 ../tcl/bin/emcdebug.tcl:190 msgid "IO points" msgstr "Ein-/Ausgänge" #: tcl/bin/emcdebug.tcl:191 ../tcl/bin/emcdebug.tcl:191 msgid "NML" msgstr "NML" #: tcl/bin/emcdebug.tcl:192 ../tcl/bin/emcdebug.tcl:192 msgid "Motion time" msgstr "Laufzeit" #: tcl/bin/emcdebug.tcl:193 src/emc/usr_intf/axis/scripts/debuglevel.py:42 #: ../tcl/bin/emcdebug.tcl:193 emc/usr_intf/axis/scripts/debuglevel.py:42 msgid "Interpreter" msgstr "Interpreter" #: tcl/bin/emcdebug.tcl:194 ../tcl/bin/emcdebug.tcl:194 msgid "RCS" msgstr "RCS" #: tcl/bin/emcdebug.tcl:195 ../tcl/bin/emcdebug.tcl:195 msgid "Trajectory level" msgstr "Bewegungsstatus" #: tcl/bin/emcdebug.tcl:196 ../tcl/bin/emcdebug.tcl:196 msgid "Interpreter list" msgstr "Interpreter-Liste" #: tcl/bin/genedit.tcl:78 tcl/mini.tcl:2533 ../tcl/bin/genedit.tcl:78 #: ../tcl/mini.tcl:2530 msgid "New" msgstr "Neu" #: tcl/bin/genedit.tcl:80 tcl/mini.tcl:1667 tcl/mini.tcl:2534 #: tcl/tklinuxcnc.tcl:720 tcl/tklinuxcnc.tcl:1657 ../tcl/bin/genedit.tcl:80 #: ../tcl/mini.tcl:1664 ../tcl/mini.tcl:2531 ../tcl/tkemc.tcl:773 #: ../tcl/tkemc.tcl:1698 msgid "Open..." msgstr "Öffnen..." #: tcl/bin/genedit.tcl:84 tcl/mini.tcl:2536 ../tcl/bin/genedit.tcl:84 #: ../tcl/mini.tcl:2533 msgid "Save As..." msgstr "Speichern unter..." #: tcl/bin/genedit.tcl:87 tcl/bin/halconfig.tcl:165 tcl/bin/halshow.tcl:93 #: tcl/mini.tcl:954 tcl/tklinuxcnc.tcl:734 tcl/ngcgui.tcl:1243 #: tcl/ngcgui.tcl:3680 tcl/bin/halshow.tcl:92 ../tcl/bin/genedit.tcl:87 #: ../tcl/bin/halconfig.tcl:165 ../tcl/mini.tcl:954 ../tcl/tkemc.tcl:785 msgid "Exit" msgstr "Beenden" #: tcl/bin/genedit.tcl:91 tcl/mini.tcl:2517 ../tcl/bin/genedit.tcl:91 #: ../tcl/mini.tcl:2514 msgid "Edit" msgstr "Bearbeiten" #: tcl/bin/genedit.tcl:92 tcl/mini.tcl:2543 ../tcl/bin/genedit.tcl:92 #: ../tcl/mini.tcl:2540 msgid "Cut" msgstr "Ausschneiden" #: tcl/bin/genedit.tcl:94 tcl/mini.tcl:2544 ../tcl/bin/genedit.tcl:94 #: ../tcl/mini.tcl:2541 msgid "Copy" msgstr "Kopieren" #: tcl/bin/genedit.tcl:96 tcl/mini.tcl:2545 ../tcl/bin/genedit.tcl:96 #: ../tcl/mini.tcl:2542 msgid "Paste" msgstr "Einfügen" #: tcl/bin/genedit.tcl:99 tcl/mini.tcl:2548 tcl/show_errors.tcl:68 #: ../tcl/bin/genedit.tcl:99 ../tcl/mini.tcl:2545 ../tcl/show_errors.tcl:68 #, fuzzy msgid "Select All" msgstr "Alles markieren" #: tcl/bin/genedit.tcl:104 tcl/bin/halconfig.tcl:192 tcl/mini.tcl:919 #: tcl/mini.tcl:2519 tcl/tklinuxcnc.tcl:790 ../tcl/bin/genedit.tcl:104 #: ../tcl/bin/halconfig.tcl:192 ../tcl/mini.tcl:919 ../tcl/mini.tcl:2516 #: ../tcl/tkemc.tcl:842 msgid "Help" msgstr "Hilfe" #: tcl/bin/genedit.tcl:105 tcl/mini.tcl:1011 tcl/mini.tcl:2559 #: tcl/tklinuxcnc.tcl:796 ../tcl/bin/genedit.tcl:105 ../tcl/mini.tcl:1011 #: ../tcl/mini.tcl:2556 ../tcl/tkemc.tcl:848 msgid "About..." msgstr "Über..." #: tcl/bin/genedit.tcl:130 ../tcl/bin/genedit.tcl:130 msgid "Save and Reload" msgstr "Speichern und Aktualisieren" #: tcl/bin/genedit.tcl:133 tcl/mini.tcl:2550 ../tcl/bin/genedit.tcl:133 #: ../tcl/mini.tcl:2547 msgid "Find..." msgstr "Suchen..." #: tcl/bin/genedit.tcl:135 tcl/mini.tcl:2552 ../tcl/bin/genedit.tcl:135 #: ../tcl/mini.tcl:2549 msgid "Renumber File..." msgstr "Zeilennummerierung aktualisieren..." #: tcl/bin/genedit.tcl:140 tcl/mini.tcl:917 tcl/mini.tcl:2518 #: tcl/tklinuxcnc.tcl:746 ../tcl/bin/genedit.tcl:140 ../tcl/mini.tcl:917 #: ../tcl/mini.tcl:2515 ../tcl/tkemc.tcl:798 msgid "Settings" msgstr "Einstellungen" #: tcl/bin/genedit.tcl:141 tcl/mini.tcl:2554 ../tcl/bin/genedit.tcl:141 #: ../tcl/mini.tcl:2551 msgid "No Numbering" msgstr "Zeilennummerierung deaktivieren" #: tcl/bin/genedit.tcl:144 tcl/mini.tcl:2556 ../tcl/bin/genedit.tcl:144 #: ../tcl/mini.tcl:2553 msgid "Line Numbering..." msgstr "Zeilennummerierung aktivieren..." #: tcl/bin/genedit.tcl:150 tcl/tklinuxcnc.tcl:768 ../tcl/bin/genedit.tcl:150 #: ../tcl/tkemc.tcl:820 msgid "Scripts" msgstr "Extras" #: tcl/bin/genedit.tcl:177 ../tcl/bin/genedit.tcl:177 msgid "About TkEditor" msgstr "Über TkEditor" #: tcl/bin/genedit.tcl:179 ../tcl/bin/genedit.tcl:179 msgid "" "TkEditor\n" "\n" "Simple Tcl/Tk Text Editor\n" "\n" "GPL Version 2" msgstr "" "TkEditor\n" "\n" "Einfacher Tcl/Tk Text-Editor\n" "\n" "GPL Version 2" #: tcl/bin/genedit.tcl:197 tcl/mini.tcl:1373 tcl/mini.tcl:1775 #: tcl/tklinuxcnc.tcl:451 src/emc/task/emctaskmain.cc:2000 #: src/emc/task/emctaskmain.cc:2072 ../tcl/bin/genedit.tcl:197 #: ../tcl/mini.tcl:1373 ../tcl/mini.tcl:1772 ../tcl/tkemc.tcl:505 #: emc/task/emctaskmain.cc:1930 #, c-format, tcl-format msgid "can't open %s" msgstr "Die Datei »%s« kann nicht geöffnet werden." #: tcl/bin/genedit.tcl:267 tcl/mini.tcl:3090 ../tcl/bin/genedit.tcl:267 #: ../tcl/mini.tcl:3087 msgid "Find" msgstr "Suchen" #: tcl/bin/genedit.tcl:270 ../tcl/bin/genedit.tcl:270 msgid "Find:" msgstr "Suchen:" #: tcl/bin/genedit.tcl:276 ../tcl/bin/genedit.tcl:276 msgid "Replace:" msgstr "Ersetzen:" #: tcl/bin/genedit.tcl:282 ../tcl/bin/genedit.tcl:282 msgid "Find All" msgstr "Alle finden" #: tcl/bin/genedit.tcl:285 tcl/mini.tcl:3113 ../tcl/bin/genedit.tcl:285 #: ../tcl/mini.tcl:3110 msgid "Replace All" msgstr "Alle ersetzen" #: tcl/bin/genedit.tcl:288 ../tcl/bin/genedit.tcl:288 msgid "Skip This" msgstr "Überspringen" #: tcl/bin/genedit.tcl:291 ../tcl/bin/genedit.tcl:291 msgid "Replace This" msgstr "Ersetzen" #: tcl/bin/genedit.tcl:297 ../tcl/bin/genedit.tcl:297 msgid "Clear" msgstr "Zurücksetzen" #: tcl/bin/genedit.tcl:422 tcl/mini.tcl:2640 ../tcl/bin/genedit.tcl:422 #: ../tcl/mini.tcl:2637 msgid "Set Line Numbering" msgstr "Zeilennummerierung" #: tcl/bin/genedit.tcl:424 tcl/mini.tcl:2644 ../tcl/bin/genedit.tcl:424 #: ../tcl/mini.tcl:2641 msgid "Increment" msgstr "Intervall" #: tcl/bin/genedit.tcl:426 tcl/mini.tcl:2646 ../tcl/bin/genedit.tcl:426 #: ../tcl/mini.tcl:2643 msgid "One" msgstr "Eins" #: tcl/bin/genedit.tcl:429 tcl/mini.tcl:2648 ../tcl/bin/genedit.tcl:429 #: ../tcl/mini.tcl:2645 msgid "Two" msgstr "Zwei" #: tcl/bin/genedit.tcl:432 tcl/mini.tcl:2650 ../tcl/bin/genedit.tcl:432 #: ../tcl/mini.tcl:2647 msgid "Five" msgstr "Fünf" #: tcl/bin/genedit.tcl:435 tcl/mini.tcl:2652 ../tcl/bin/genedit.tcl:435 #: ../tcl/mini.tcl:2649 msgid "Ten" msgstr "Zehn" #: tcl/bin/genedit.tcl:439 tcl/mini.tcl:2654 ../tcl/bin/genedit.tcl:439 #: ../tcl/mini.tcl:2651 msgid "Space" msgstr "Abstand" #: tcl/bin/genedit.tcl:441 tcl/mini.tcl:2656 ../tcl/bin/genedit.tcl:441 #: ../tcl/mini.tcl:2653 msgid "Single Space" msgstr "ein Leerzeichen" #: tcl/bin/genedit.tcl:444 tcl/mini.tcl:2658 ../tcl/bin/genedit.tcl:444 #: ../tcl/mini.tcl:2655 msgid "Double Space" msgstr "zwei Leerzeichen" #: tcl/bin/genedit.tcl:447 tcl/mini.tcl:2660 ../tcl/bin/genedit.tcl:447 #: ../tcl/mini.tcl:2657 msgid "Tab Space" msgstr "Tabulator" #: tcl/bin/genedit.tcl:453 ../tcl/bin/genedit.tcl:453 msgid "Next Number:" msgstr "Startnummer:" #: tcl/bin/genedit.tcl:474 tcl/mini.tcl:2668 ../tcl/bin/genedit.tcl:474 #: ../tcl/mini.tcl:2665 msgid "Renumber" msgstr "Anwenden" #: tcl/bin/halconfig.tcl:88 tcl/bin/halshow.tcl:33 ../tcl/bin/halconfig.tcl:88 #: ../tcl/bin/halshow.tcl:33 msgid "HAL Configuration" msgstr "HAL konfigurieren" #: tcl/bin/halconfig.tcl:103 ../tcl/bin/halconfig.tcl:103 msgid "Would you like to save your configuration before you exit?" msgstr "Möchten Sie Ihre Änderungen vor dem Beenden speichern? " #: tcl/bin/halconfig.tcl:103 ../tcl/bin/halconfig.tcl:103 msgid "Save All" msgstr "Alles Speichern" #: tcl/bin/halconfig.tcl:103 ../tcl/bin/halconfig.tcl:103 msgid "Save Tune" msgstr "Änderungen speichern" #: tcl/bin/halconfig.tcl:103 ../tcl/bin/halconfig.tcl:103 msgid "Save as Netlist" msgstr "Speichere als Netzliste" #: tcl/bin/halconfig.tcl:103 ../tcl/bin/halconfig.tcl:103 msgid "Don't Save" msgstr "Nicht speichern" #: tcl/bin/halconfig.tcl:132 ../tcl/bin/halconfig.tcl:132 msgid "Show" msgstr "Anzeigen" #: tcl/bin/halconfig.tcl:133 ../tcl/bin/halconfig.tcl:133 msgid "Watch" msgstr "Beobachten" #: tcl/bin/halconfig.tcl:134 ../tcl/bin/halconfig.tcl:134 msgid "Modify" msgstr "Ändern" #: tcl/bin/halconfig.tcl:157 ../tcl/bin/halconfig.tcl:157 msgid "Save INI Tuning" msgstr "INI-Änderungen speichern" #: tcl/bin/halconfig.tcl:159 ../tcl/bin/halconfig.tcl:159 msgid "Save HAL Ini" msgstr "HAL-INI speichern" #: tcl/bin/halconfig.tcl:161 ../tcl/bin/halconfig.tcl:161 msgid "Save HAL Net" msgstr "HAL-NET speichern" #: tcl/bin/halconfig.tcl:163 ../tcl/bin/halconfig.tcl:163 msgid "Save and Exit" msgstr "Speichern und Beenden" #: tcl/bin/halconfig.tcl:168 tcl/mini.tcl:916 tcl/tklinuxcnc.tcl:739 #: ../tcl/bin/halconfig.tcl:168 ../tcl/mini.tcl:916 ../tcl/tkemc.tcl:790 msgid "View" msgstr "Ansicht" #: tcl/bin/halconfig.tcl:170 tcl/bin/halshow.tcl:105 tcl/bin/halshow.tcl:104 #: ../tcl/bin/halconfig.tcl:170 ../tcl/bin/halshow.tcl:87 msgid "Expand Tree" msgstr "Menübaum aufklappen" #: tcl/bin/halconfig.tcl:172 tcl/bin/halshow.tcl:107 tcl/bin/halshow.tcl:106 #: ../tcl/bin/halconfig.tcl:172 ../tcl/bin/halshow.tcl:89 msgid "Collapse Tree" msgstr "Menübaum zuklappen" #: tcl/bin/halconfig.tcl:175 tcl/bin/halshow.tcl:110 tcl/bin/halshow.tcl:109 #: ../tcl/bin/halconfig.tcl:175 ../tcl/bin/halshow.tcl:92 msgid "Expand Pins" msgstr "Pins aufklappen" #: tcl/bin/halconfig.tcl:177 tcl/bin/halshow.tcl:112 tcl/bin/halshow.tcl:111 #: ../tcl/bin/halconfig.tcl:177 ../tcl/bin/halshow.tcl:94 msgid "Expand Parameters" msgstr "Parameters aufklappen" #: tcl/bin/halconfig.tcl:179 tcl/bin/halshow.tcl:114 tcl/bin/halshow.tcl:113 #: ../tcl/bin/halconfig.tcl:179 ../tcl/bin/halshow.tcl:96 msgid "Expand Signals" msgstr "Signals aufklappen" #: tcl/bin/halconfig.tcl:182 tcl/bin/halshow.tcl:117 tcl/bin/halshow.tcl:116 #: ../tcl/bin/halconfig.tcl:182 ../tcl/bin/halshow.tcl:99 msgid "Erase Watch" msgstr "Ansicht löschen" #: tcl/bin/halconfig.tcl:194 tcl/mini.tcl:840 tcl/mini.tcl:2785 #: ../tcl/bin/halconfig.tcl:194 ../tcl/mini.tcl:840 ../tcl/mini.tcl:2782 msgid "About" msgstr "Über" #: tcl/bin/halconfig.tcl:196 ../tcl/bin/halconfig.tcl:196 msgid "Main" msgstr "Allgemein" #: tcl/bin/halconfig.tcl:476 ../tcl/bin/halconfig.tcl:476 msgid "Enter HAL command :" msgstr "HAL-Befehl:" #: tcl/bin/halconfig.tcl:479 tcl/bin/halconfig.tcl:528 tcl/bin/halshow.tcl:357 #: tcl/bin/halshow.tcl:354 ../tcl/bin/halconfig.tcl:479 #: ../tcl/bin/halconfig.tcl:528 ../tcl/bin/halshow.tcl:382 msgid "Execute" msgstr "Anwenden" #: tcl/bin/halconfig.tcl:943 tcl/bin/halshow.tcl:413 tcl/bin/halshow.tcl:405 #: ../tcl/bin/halconfig.tcl:943 ../tcl/bin/halshow.tcl:438 msgid "Select a node to show." msgstr "Bitte Variable zum Anzeigen auswählen." #: tcl/bin/halconfig.tcl:968 tcl/bin/halshow.tcl:438 tcl/bin/halshow.tcl:429 #: ../tcl/bin/halconfig.tcl:968 ../tcl/bin/halshow.tcl:463 msgid "<-- Select a Leaf. Click on its name." msgstr "Bitte Variable zum Anzeigen auswählen." #: tcl/bin/halconfig.tcl:1085 tcl/bin/halconfig.tcl:1095 #: tcl/bin/halconfig.tcl:1102 tcl/bin/halconfig.tcl:1109 #: tcl/bin/halconfig.tcl:1116 ../tcl/bin/halconfig.tcl:1085 #: ../tcl/bin/halconfig.tcl:1095 ../tcl/bin/halconfig.tcl:1102 #: ../tcl/bin/halconfig.tcl:1109 ../tcl/bin/halconfig.tcl:1116 #, tcl-format msgid "Click a highlighted entry where %s should go." msgstr "" #: tcl/bin/halconfig.tcl:1092 ../tcl/bin/halconfig.tcl:1092 msgid "Nothing to be done for parameters here. Try the tuning page" msgstr "" #: tcl/bin/halconfig.tcl:1124 ../tcl/bin/halconfig.tcl:1124 #, tcl-format msgid "%s is not a leaf, try again" msgstr "" #: tcl/bin/halconfig.tcl:1281 msgid "" "Copyright Raymond E Henry. 2006\n" "License: GPL Version 2\n" "\n" "Halconfig is an LinuxCNC configuration tool. It requires that you have " "started an instance of linuxcnc.\n" "\n" "This script carries no warranty or liability for its use to the extent " "allowed by law." msgstr "" #: tcl/bin/halshow.tcl:70 tcl/bin/halshow.tcl:69 ../tcl/bin/halshow.tcl:69 msgid " SHOW " msgstr "ANZEIGEN" #: tcl/bin/halshow.tcl:71 tcl/bin/halshow.tcl:70 ../tcl/bin/halshow.tcl:70 msgid " WATCH " msgstr "BEOBACHTEN" #: tcl/bin/halshow.tcl:91 tcl/bin/halshow.tcl:90 msgid "Load Watch List" msgstr "" #: tcl/bin/halshow.tcl:103 tcl/bin/halshow.tcl:102 ../tcl/bin/halshow.tcl:85 msgid "Tree View" msgstr "Ansicht" #: tcl/bin/halshow.tcl:354 tcl/bin/halshow.tcl:349 ../tcl/bin/halshow.tcl:379 msgid "Test HAL command :" msgstr "HAL-Befehl ausprobieren:" #: tcl/bin/halshow.tcl:556 tcl/bin/halshow.tcl:544 msgid "Load a watch list" msgstr "" #: tcl/bin/halshow.tcl:579 tcl/bin/halshow.tcl:567 msgid "Save current watch list" msgstr "" #: tcl/bin/halshow.tcl:593 tcl/bin/halshow.tcl:581 ../tcl/bin/halshow.tcl:583 msgid "Commands may be tested here but they will NOT be saved" msgstr "" "Die Befehle können hier ausprobiert werden, werden aber NICHT gespeichert." #: tcl/bin/pickconfig.tcl:50 ../tcl/bin/pickconfig.tcl:47 msgid "" "Can't find the bwidget 1.7 package. There is a debian bwidget package; " "install \n" "it with sudo apt-get install bwidget." msgstr "" "Das Paket »bwidget 1.7« konnte nicht gefunden werden.\n" "Es existiert ein »bwidget« Paket für Debian basierende Systeme.\n" "Dieses kann mit »sudo apt-get install bwidget« installiert werden." #: tcl/bin/pickconfig.tcl:178 ../tcl/bin/pickconfig.tcl:145 msgid "No details available." msgstr "Es ist keine Beschreibung verfügbar." #: tcl/bin/pickconfig.tcl:194 #, fuzzy msgid "LinuxCNC Configuration Selector" msgstr "EMC2 Konfigurationsassistent" #: tcl/bin/pickconfig.tcl:215 #, fuzzy msgid "" "Welcome to LinuxCNC.\n" "\n" "Select a machine configuration from the list on the left.\n" "Details about the selected configuration will appear in the display on the " "right.\n" "Click 'OK' to run the selected configuration" msgstr "" "Willkommen zu EMC2.\n" "\n" "Wählen Sie eine Maschinenkonfiguration aus der Liste.\n" "Eine Beschreibung der gewählte Konfiguration wird auf der rechten Seite " "angezeigt.\n" "Bestätigen Sie mit »OK«, um die gewählte Konfiguration zu laden." #: tcl/bin/pickconfig.tcl:271 ../tcl/bin/pickconfig.tcl:267 msgid "My Configurations" msgstr "Eigene Konfigurationen" #: tcl/bin/pickconfig.tcl:274 ../tcl/bin/pickconfig.tcl:270 msgid "Sample Configurations" msgstr "Beispielkonfigurationen" #: tcl/bin/pickconfig.tcl:332 ../tcl/bin/pickconfig.tcl:329 #, tcl-format msgid "ERROR: no configurations found in path '%s'" msgstr "FEHLER: Es wurden keine Konfigurationen im Verzeichnis »%s« gefunden." #: tcl/bin/pickconfig.tcl:369 ../tcl/bin/pickconfig.tcl:366 msgid "Copy Configuration?" msgstr "Konfiguration kopieren?" #: tcl/bin/pickconfig.tcl:369 ../tcl/bin/pickconfig.tcl:366 #, tcl-format msgid "" "Would you like to copy the %s configuration to your home directory so you " "can customize it?" msgstr "" "Soll die Konfiguration »%s« in Ihr home-Verzeichnis kopiert werden? \n" "Dies ist nötig, damit benutzerspezifische Änderungen duchgeführt werden " "können." #: tcl/bin/pickconfig.tcl:369 #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:563 #: ../tcl/bin/pickconfig.tcl:366 #: emc/usr_intf/axis/scripts/image-to-gcode.py:554 msgid "Yes" msgstr "Ja" #: tcl/bin/pickconfig.tcl:479 ../tcl/bin/pickconfig.tcl:401 msgid "Configuration Copied" msgstr "Konfiguration kopiert" #: tcl/bin/pickconfig.tcl:479 #, fuzzy, tcl-format msgid "" "The configuration file has been copied to %s. Next time, choose this " "location when starting LinuxCNC." msgstr "" "Die Konfiguration wurde erfolgreich in das Verzeichnis »%s« kopiert. Beim " "nächsten Start von EMC2 kann diese ausgewählt werden." #: tcl/bin/pickconfig.tcl:506 ../tcl/bin/pickconfig.tcl:426 msgid "Shortcut Created" msgstr "Desktop-Verknüpfung erstellt" #: tcl/bin/pickconfig.tcl:506 ../tcl/bin/pickconfig.tcl:426 msgid "" "A shortcut to this configuration file has been created on your desktop. You " "can use it to automatically launch this configuration." msgstr "" "Die Desktop-Verknüpfung wurde erfolgreich erstellt. Über diese Verknüpfung " "kann EMC2 automatisch mit mit dieser Konfiguration gestartet werden." #: tcl/bin/pickconfig.tcl:511 ../tcl/bin/pickconfig.tcl:431 msgid "Create Desktop Shortcut" msgstr "Desktop-Verknüpfung erstellen" #: tcl/bin/tkbackplot.tcl:110 #, fuzzy msgid "TkLinuxCNC BackPlot" msgstr "TkEMC Backplot" #: tcl/bin/tkbackplot.tcl:125 ../tcl/bin/tkbackplot.tcl:125 msgid "SETUP" msgstr "SETUP" #: tcl/bin/tkbackplot.tcl:127 ../tcl/bin/tkbackplot.tcl:127 msgid "RESET" msgstr "RESET" #: tcl/bin/tkbackplot.tcl:129 ../tcl/bin/tkbackplot.tcl:129 msgid "CANCEL" msgstr "ABBRECHEN" #: tcl/bin/tkbackplot.tcl:250 ../tcl/bin/tkbackplot.tcl:250 #: emc/usr_intf/pncconf/pncconf.glade:1136 msgid "AXIS" msgstr "ACHSE" #: tcl/bin/tkbackplot.tcl:251 ../tcl/bin/tkbackplot.tcl:251 msgid "OFFSET" msgstr "OFFSET" #: tcl/bin/tkbackplot.tcl:252 ../tcl/bin/tkbackplot.tcl:252 msgid "ANGLE" msgstr "WINKEL" #: tcl/bin/tkbackplot.tcl:253 ../tcl/bin/tkbackplot.tcl:253 msgid "DIRECTION" msgstr "RICHTUNG" #: tcl/bin/tkbackplot.tcl:270 ../tcl/bin/tkbackplot.tcl:270 msgid "SIZE :" msgstr "MASSSTAB" #: tcl/mini.tcl:490 ../tcl/mini.tcl:490 #, tcl-format msgid "JOG %s +" msgstr "%s +" #: tcl/mini.tcl:491 ../tcl/mini.tcl:491 #, tcl-format msgid "JOG %s -" msgstr "%s -" #: tcl/mini.tcl:492 ../tcl/mini.tcl:492 #, tcl-format msgid "" "%s\n" "\n" "Z\n" "E\n" "R\n" "O" msgstr "" "%s\n" "\n" "R\n" "E\n" "F\n" "." #: tcl/mini.tcl:840 ../tcl/mini.tcl:840 msgid "" "TkMini \n" "\n" "Tcl/Tk GUI for Enhanced Machine Controller\n" "\n" "GPL Copyright 2003 \n" "Ray Henry \n" "\n" " 3D backplotter by Paul Corner \n" " \n" "This software comes with ABSOLUTELY NO GUARANTEE! \n" "For details see the copyright.html file in this directory." msgstr "" "TkMini \n" "\n" "Graphische Tcl/Tk Oberfläche für EMC2\n" "\n" "GPL Copyright 2003 \n" "Ray Henry \n" "\n" " 3D backplotter by Paul Corner \n" " \n" "This software comes with ABSOLUTELY NO GUARANTEE!\n" "For details see the copyright.html file in this directory." #: tcl/mini.tcl:915 ../tcl/mini.tcl:915 msgid "Program" msgstr "Programm" #: tcl/mini.tcl:918 ../tcl/mini.tcl:918 msgid "Info" msgstr "Info" #: tcl/mini.tcl:923 ../tcl/mini.tcl:923 msgid "Backplot" msgstr "Backplot" #: tcl/mini.tcl:925 src/emc/usr_intf/pncconf/pncconf.glade:6125 #: ../tcl/mini.tcl:925 msgid "Editor" msgstr "Editor" #: tcl/mini.tcl:927 ../tcl/mini.tcl:927 msgid "Offsets" msgstr "Offsets" #: tcl/mini.tcl:929 ../tcl/mini.tcl:929 msgid "Tools" msgstr "Werkzeuge" #: tcl/mini.tcl:951 tcl/mini.tcl:3565 tcl/tklinuxcnc.tcl:732 #: ../tcl/mini.tcl:951 ../tcl/mini.tcl:3562 ../tcl/tkemc.tcl:783 msgid "Reset" msgstr "Zurücksetzen" #: tcl/mini.tcl:960 ../tcl/mini.tcl:960 msgid "Position Type" msgstr "Positionierungs-Info" #: tcl/mini.tcl:962 ../tcl/mini.tcl:962 msgid "Tool Info" msgstr "Werkzeug-Info" #: tcl/mini.tcl:964 ../tcl/mini.tcl:964 msgid "Offset Info" msgstr "Offset-Info" #: tcl/mini.tcl:967 ../tcl/mini.tcl:967 msgid "Show Restart" msgstr "Neustart anzeigen" #: tcl/mini.tcl:968 ../tcl/mini.tcl:968 msgid "Hide Restart" msgstr "Neustart verbergen" #: tcl/mini.tcl:970 ../tcl/mini.tcl:970 msgid "Show Split Right" msgstr "Fenster teilen" #: tcl/mini.tcl:972 ../tcl/mini.tcl:972 msgid "Show Mode Full" msgstr "Nur Menü anzeigen" #: tcl/mini.tcl:974 ../tcl/mini.tcl:974 msgid "Show Popin Full" msgstr "Nur Auswahl anzeigen" #: tcl/mini.tcl:978 ../tcl/mini.tcl:978 msgid "Actual Position" msgstr "Aktuelle Position" #: tcl/mini.tcl:980 ../tcl/mini.tcl:980 msgid "Commanded Position" msgstr "Erwartete Position" #: tcl/mini.tcl:983 ../tcl/mini.tcl:983 msgid "Machine Position" msgstr "Maschinenposition" #: tcl/mini.tcl:985 ../tcl/mini.tcl:985 msgid "Relative Position" msgstr "Relative Position" #: tcl/mini.tcl:988 tcl/tklinuxcnc.tcl:747 ../tcl/mini.tcl:988 #: ../tcl/tkemc.tcl:799 msgid "Calibration..." msgstr "Kalibrierung..." #: tcl/mini.tcl:990 ../tcl/mini.tcl:990 msgid "HAL Show..." msgstr "HAL anzeigen..." #: tcl/mini.tcl:992 ../tcl/mini.tcl:992 msgid "HAL Config..." msgstr "HAL konfigurieren..." #: tcl/mini.tcl:997 ../tcl/mini.tcl:997 msgid "Program File" msgstr "Programmdatei" #: tcl/mini.tcl:998 ../tcl/mini.tcl:998 #, tcl-format msgid "Program file is %s" msgstr "Programmdatei ist »%s«" #: tcl/mini.tcl:999 ../tcl/mini.tcl:999 msgid "Editor File" msgstr "Editordatei" #: tcl/mini.tcl:1000 ../tcl/mini.tcl:1000 #, tcl-format msgid "Editor file is %s" msgstr "Editordatei ist »%s«" #: tcl/mini.tcl:1001 ../tcl/mini.tcl:1001 msgid "Parameter File" msgstr "Parameterdatei" #: tcl/mini.tcl:1002 ../tcl/mini.tcl:1002 #, tcl-format msgid "Parameter file is %s" msgstr "Parameterdatei ist »%s«" #: tcl/mini.tcl:1003 ../tcl/mini.tcl:1003 msgid "Tool File" msgstr "Werkzeugdatei" #: tcl/mini.tcl:1004 ../tcl/mini.tcl:1004 #, tcl-format msgid "Tool file is %s" msgstr "Werkzeugdatei ist »%s«" #: tcl/mini.tcl:1006 ../tcl/mini.tcl:1006 msgid "Active G Codes" msgstr "Aktive G-Codes" #: tcl/mini.tcl:1007 ../tcl/mini.tcl:1007 #, tcl-format msgid "" "Active codes include; \n" "%s" msgstr "" "Aktive G-Codes sind:\n" "%s" #: tcl/mini.tcl:1010 tcl/mini.tcl:2558 tcl/tklinuxcnc.tcl:791 #: ../tcl/mini.tcl:1010 ../tcl/mini.tcl:2555 ../tcl/tkemc.tcl:843 msgid "Help..." msgstr "Hilfe..." #: tcl/mini.tcl:1027 tcl/tklinuxcnc.tcl:890 ../tcl/mini.tcl:1027 #: ../tcl/tkemc.tcl:942 msgid "ABORT" msgstr "ABBRECHEN" #: tcl/mini.tcl:1038 tcl/mini.tcl:2048 ../tcl/mini.tcl:1038 #: ../tcl/mini.tcl:2045 msgid "CONTINUE" msgstr "FORTSETZEN" #: tcl/mini.tcl:1044 tcl/tklinuxcnc.tcl:828 tcl/tklinuxcnc.tcl:2248 #: src/emc/usr_intf/touchy/touchy.glade:1264 ../tcl/mini.tcl:1044 #: ../tcl/tkemc.tcl:880 ../tcl/tkemc.tcl:2289 msgid "MDI" msgstr "MDI" #: tcl/mini.tcl:1048 tcl/tklinuxcnc.tcl:2239 ../tcl/mini.tcl:1048 #: ../tcl/tkemc.tcl:2280 msgid "AUTO" msgstr "AUTO" #: tcl/mini.tcl:1052 tcl/mini.tcl:1812 tcl/tklinuxcnc.tcl:2141 #: tcl/tklinuxcnc.tcl:2261 ../tcl/mini.tcl:1052 ../tcl/mini.tcl:1809 #: ../tcl/tkemc.tcl:2182 ../tcl/tkemc.tcl:2302 msgid "MANUAL" msgstr "MANUELL" #: tcl/mini.tcl:1106 ../tcl/mini.tcl:1106 msgid "Tool #:" msgstr "Werkzeug:" #: tcl/mini.tcl:1108 ../tcl/mini.tcl:1108 msgid "Length :" msgstr "Länge:" #: tcl/mini.tcl:1119 ../tcl/mini.tcl:1119 msgid "Work Offsets: " msgstr "Arbeitsoffset:" #: tcl/mini.tcl:1121 ../tcl/mini.tcl:1121 msgid "start offsets popup here" msgstr "" #: tcl/mini.tcl:1165 ../tcl/mini.tcl:1165 msgid "start override popup here" msgstr "" #: tcl/mini.tcl:1168 tcl/tklinuxcnc.tcl:1576 share/axis/tcl/axis.tcl:1669 #: ../tcl/mini.tcl:1168 ../tcl/tkemc.tcl:1617 ../share/axis/tcl/axis.tcl:1625 msgid "Feed Override:" msgstr "Vorschubübersteuerung:" #: tcl/mini.tcl:1180 ../tcl/mini.tcl:1180 msgid "-- MESSAGES --" msgstr "-- MITTEILUNGEN --" #: tcl/mini.tcl:1230 ../tcl/mini.tcl:1230 msgid "toggleView's not doin nothin yet" msgstr "" #: tcl/mini.tcl:1282 ../tcl/mini.tcl:1282 msgid "Can't set zero with a tool offset active so I issued G49 to cancel it." msgstr "" "Mit aktivem Werkzeugoffset kann keine Referenzfahrt durchgeführt werden. Es " "wird empfohlen diesen mit dem Befehl »G49« zu beenden." #: tcl/mini.tcl:1346 ../tcl/mini.tcl:1346 #, tcl-format msgid "Can't update the var file while machine is in auto and %s." msgstr "" "Die .var-Datei kann nicht aktualisiert werden, solange die Maschine im »auto«-" "Modus und »%s« ist." #: tcl/mini.tcl:1400 tcl/tklinuxcnc.tcl:1227 ../tcl/mini.tcl:1400 #: ../tcl/tkemc.tcl:1268 msgid "override limits" msgstr "Grenzw. aufheben" #: tcl/mini.tcl:1405 tcl/tklinuxcnc.tcl:1263 ../tcl/mini.tcl:1405 #: ../tcl/tkemc.tcl:1304 msgid "home" msgstr "Home" #: tcl/mini.tcl:1426 ../tcl/mini.tcl:1426 msgid "DEFAULT" msgstr "STANDART" #: tcl/mini.tcl:1427 ../tcl/mini.tcl:1427 msgid "Speed:" msgstr "Geschw.:" #: tcl/mini.tcl:1430 ../tcl/mini.tcl:1430 msgid "RAPID" msgstr "MAXIMAL" #: tcl/mini.tcl:1447 tcl/tklinuxcnc.tcl:1391 ../tcl/mini.tcl:1447 #: ../tcl/tkemc.tcl:1432 msgid "Set Jog Speed" msgstr "Schrittgeschwindigkeit" #: tcl/mini.tcl:1453 tcl/tklinuxcnc.tcl:1404 ../tcl/mini.tcl:1453 #: ../tcl/tkemc.tcl:1445 msgid "Set jog speed:" msgstr "Schrittgeschwindigkeit:" #: tcl/mini.tcl:1511 ../tcl/mini.tcl:1511 msgid "JOG X +" msgstr "X +" #: tcl/mini.tcl:1512 ../tcl/mini.tcl:1512 msgid "JOG X -" msgstr "X -" #: tcl/mini.tcl:1516 ../tcl/mini.tcl:1516 msgid "increment" msgstr "Inkrementell" #: tcl/mini.tcl:1518 tcl/tklinuxcnc.tcl:602 tcl/tklinuxcnc.tcl:1249 #: tcl/tklinuxcnc.tcl:1253 ../tcl/mini.tcl:1518 ../tcl/tkemc.tcl:656 #: ../tcl/tkemc.tcl:1290 ../tcl/tkemc.tcl:1294 msgid "continuous" msgstr "Durchgehend" #: tcl/mini.tcl:1520 ../tcl/mini.tcl:1520 msgid "" "A\n" "L\n" "L\n" "\n" "Z\n" "E\n" "R\n" "O" msgstr "" "R\n" "E\n" "F\n" ".\n" "\n" "A\n" "L\n" "L\n" "E" #: tcl/mini.tcl:1588 src/emc/usr_intf/touchy/touchy.glade:1422 #: ../tcl/mini.tcl:1585 msgid "Spindle Forward" msgstr "SPINDEL VORWÄRTS" #: tcl/mini.tcl:1589 src/emc/usr_intf/touchy/touchy.glade:1433 #: ../tcl/mini.tcl:1586 msgid "Spindle Reverse" msgstr "SPINDEL RÜCKWÄRTS" #: tcl/mini.tcl:1590 tcl/tklinuxcnc.tcl:871 ../tcl/mini.tcl:1587 #: ../tcl/tkemc.tcl:923 msgid "Spindle off" msgstr "Spindel aus" #: tcl/mini.tcl:1592 src/emc/usr_intf/touchy/touchy.glade:1479 #: ../tcl/mini.tcl:1589 msgid "Spindle Slower" msgstr "SPINDEL LANGSAMER" #: tcl/mini.tcl:1596 src/emc/usr_intf/touchy/touchy.glade:1464 #: ../tcl/mini.tcl:1593 msgid "Spindle Faster" msgstr "SPINDEL SCHNELLER" #: tcl/mini.tcl:1632 tcl/tklinuxcnc.tcl:1620 ../tcl/mini.tcl:1629 #: ../tcl/tkemc.tcl:1661 msgid "MDI:" msgstr "MDI:" #: tcl/mini.tcl:1669 tcl/tklinuxcnc.tcl:1658 #: src/emc/usr_intf/stepconf/stepconf.glade:4403 #: src/emc/usr_intf/pncconf/pncconf.glade:60509 #: src/emc/usr_intf/pncconf/pncconf.glade:61603 #: src/emc/usr_intf/pncconf/pncconf.glade:62696 #: src/emc/usr_intf/pncconf/pncconf.glade:63789 #: src/emc/usr_intf/pncconf/pncconf.glade:64889 ../tcl/mini.tcl:1666 #: ../tcl/tkemc.tcl:1699 emc/usr_intf/stepconf/stepconf.glade:4045 #: emc/usr_intf/pncconf/pncconf.glade:20249 #: emc/usr_intf/pncconf/pncconf.glade:21272 #: emc/usr_intf/pncconf/pncconf.glade:21972 #: emc/usr_intf/pncconf/pncconf.glade:22672 msgid "Run" msgstr "Ausführen" #: tcl/mini.tcl:1671 tcl/tklinuxcnc.tcl:1659 #: src/emc/usr_intf/pncconf/pncconf.glade:60574 #: src/emc/usr_intf/pncconf/pncconf.glade:61668 #: src/emc/usr_intf/pncconf/pncconf.glade:62761 #: src/emc/usr_intf/pncconf/pncconf.glade:63854 ../tcl/mini.tcl:1668 #: ../tcl/tkemc.tcl:1700 emc/usr_intf/pncconf/pncconf.glade:20220 #: emc/usr_intf/pncconf/pncconf.glade:21243 #: emc/usr_intf/pncconf/pncconf.glade:21943 #: emc/usr_intf/pncconf/pncconf.glade:22643 msgid "Pause" msgstr "Pause" #: tcl/mini.tcl:1673 tcl/tklinuxcnc.tcl:1660 ../tcl/mini.tcl:1670 #: ../tcl/tkemc.tcl:1701 msgid "Resume" msgstr "Fortsetzen" #: tcl/mini.tcl:1675 tcl/tklinuxcnc.tcl:1661 ../tcl/mini.tcl:1672 #: ../tcl/tkemc.tcl:1702 msgid "Step" msgstr "Schritt" #: tcl/mini.tcl:1677 tcl/tklinuxcnc.tcl:1662 ../tcl/mini.tcl:1674 #: ../tcl/tkemc.tcl:1703 msgid "Verify" msgstr "Überprüfen" #: tcl/mini.tcl:1698 ../tcl/mini.tcl:1695 msgid "RESTART LINE" msgstr "Neustart von:" #: tcl/mini.tcl:1699 ../tcl/mini.tcl:1696 msgid "Back" msgstr "vorheriger Zeile" #: tcl/mini.tcl:1700 ../tcl/mini.tcl:1697 msgid "Ahead" msgstr "gleicher Zeile" #: tcl/mini.tcl:1701 tcl/ngcgui.tcl:1221 ../tcl/mini.tcl:1698 msgid "Restart" msgstr "Anfang an" #: tcl/mini.tcl:1711 tcl/mini.tcl:2823 tcl/mini.tcl:2882 #: tcl/tklinuxcnc.tcl:465 src/emc/usr_intf/axis/scripts/axis.py:1872 #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:754 #: src/emc/usr_intf/axis/scripts/axis.py:1885 ../tcl/mini.tcl:1708 #: ../tcl/mini.tcl:2820 ../tcl/mini.tcl:2879 ../tcl/tkemc.tcl:519 #: emc/usr_intf/axis/scripts/axis.py:2761 #: emc/usr_intf/axis/scripts/image-to-gcode.py:745 msgid "All files" msgstr "Alle Dateien" #: tcl/mini.tcl:1712 tcl/mini.tcl:2824 tcl/mini.tcl:2883 #: tcl/tklinuxcnc.tcl:466 ../tcl/mini.tcl:1709 ../tcl/mini.tcl:2821 #: ../tcl/mini.tcl:2880 ../tcl/tkemc.tcl:520 msgid "Text files" msgstr "Textdateien" #: tcl/mini.tcl:1713 tcl/mini.tcl:2825 tcl/mini.tcl:2884 #: tcl/tklinuxcnc.tcl:467 ../tcl/mini.tcl:1710 ../tcl/mini.tcl:2822 #: ../tcl/mini.tcl:2881 ../tcl/tkemc.tcl:521 msgid "NC files" msgstr "NC Dateien" #: tcl/mini.tcl:1753 ../tcl/mini.tcl:1750 msgid "" "The interpreter is running. \n" " Pressing OK will abort and load the new program" msgstr "" "Der Interpreter arbeitet gerade. \n" "Bestätigen Sie mit »OK«, um abzubrechen und die neue Datei zu laden." #: tcl/mini.tcl:1886 ../tcl/mini.tcl:1883 msgid "ESTOPPED" msgstr "EINSCHALTEN" #: tcl/mini.tcl:1889 ../tcl/mini.tcl:1886 msgid "ESTOP PUSH" msgstr "NOTAUS" #: tcl/mini.tcl:1892 tcl/tklinuxcnc.tcl:2233 ../tcl/mini.tcl:1889 #: ../tcl/tkemc.tcl:2274 msgid "ESTOP RESET" msgstr "NOTAUS RESET" #: tcl/mini.tcl:1897 tcl/tklinuxcnc.tcl:2298 ../tcl/mini.tcl:1894 #: ../tcl/tkemc.tcl:2339 msgid "SPINDLE FORWARD" msgstr "SPINDEL VORWÄRTS" #: tcl/mini.tcl:1899 tcl/tklinuxcnc.tcl:2300 ../tcl/mini.tcl:1896 #: ../tcl/tkemc.tcl:2341 msgid "SPINDLE REVERSE" msgstr "SPINDEL RÜCKWÄRTS" #: tcl/mini.tcl:1901 tcl/tklinuxcnc.tcl:2302 ../tcl/mini.tcl:1898 #: ../tcl/tkemc.tcl:2343 msgid "SPINDLE OFF" msgstr "SPINDEL HALT" #: tcl/mini.tcl:1903 tcl/tklinuxcnc.tcl:2304 ../tcl/mini.tcl:1900 #: ../tcl/tkemc.tcl:2345 msgid "SPINDLE INCREASE" msgstr "SPINDEL ERHÖHEND" #: tcl/mini.tcl:1905 tcl/tklinuxcnc.tcl:2306 ../tcl/mini.tcl:1902 #: ../tcl/tkemc.tcl:2347 msgid "SPINDLE DECREASE" msgstr "SPINDEL ABNEHMEND" #: tcl/mini.tcl:1907 tcl/tklinuxcnc.tcl:2308 ../tcl/mini.tcl:1904 #: ../tcl/tkemc.tcl:2349 msgid "SPINDLE ?" msgstr "SPINDEL ?" #: tcl/mini.tcl:1911 tcl/tklinuxcnc.tcl:2312 ../tcl/mini.tcl:1908 #: ../tcl/tkemc.tcl:2353 msgid "BRAKE ON" msgstr "BREMSE AN" #: tcl/mini.tcl:1913 tcl/tklinuxcnc.tcl:2314 ../tcl/mini.tcl:1910 #: ../tcl/tkemc.tcl:2355 msgid "BRAKE OFF" msgstr "BREMSE AUS" #: tcl/mini.tcl:1915 tcl/tklinuxcnc.tcl:2316 ../tcl/mini.tcl:1912 #: ../tcl/tkemc.tcl:2357 msgid "BRAKE ?" msgstr "BREMSE ?" #: tcl/mini.tcl:1919 tcl/tklinuxcnc.tcl:2274 ../tcl/mini.tcl:1916 #: ../tcl/tkemc.tcl:2315 msgid "MIST ON" msgstr "NEBEL AN" #: tcl/mini.tcl:1921 tcl/tklinuxcnc.tcl:2276 ../tcl/mini.tcl:1918 #: ../tcl/tkemc.tcl:2317 msgid "MIST OFF" msgstr "NEBEL AUS" #: tcl/mini.tcl:1923 tcl/tklinuxcnc.tcl:2278 ../tcl/mini.tcl:1920 #: ../tcl/tkemc.tcl:2319 msgid "MIST ?" msgstr "NEBEL ?" #: tcl/mini.tcl:1927 tcl/tklinuxcnc.tcl:2282 ../tcl/mini.tcl:1924 #: ../tcl/tkemc.tcl:2323 msgid "FLOOD ON" msgstr "KÜHLM. AN" #: tcl/mini.tcl:1929 tcl/tklinuxcnc.tcl:2284 ../tcl/mini.tcl:1926 #: ../tcl/tkemc.tcl:2325 msgid "FLOOD OFF" msgstr "KÜHLM. AUS" #: tcl/mini.tcl:1931 tcl/tklinuxcnc.tcl:2286 ../tcl/mini.tcl:1928 #: ../tcl/tkemc.tcl:2327 msgid "FLOOD ?" msgstr "KÜHLM. ?" #: tcl/mini.tcl:2052 ../tcl/mini.tcl:2049 msgid "FEEDHOLD" msgstr "ANHALTEN" #: tcl/mini.tcl:2124 ../tcl/mini.tcl:2121 msgid "" "TOOL SETUP \n" " Click or tab to edit. Press enter to return to keyboard machine control." msgstr "" "WERKZEUG SETUP \n" "\n" "Wählen Sie mit der Maus oder der Tabulator-Taste den gewünschten Wert aus.\n" "Mit der Eingabetaste wird der Wert übernommen." #: tcl/mini.tcl:2130 ../tcl/mini.tcl:2127 msgid " TOOL NUMBER " msgstr " WERKZEUG " #: tcl/mini.tcl:2131 ../tcl/mini.tcl:2128 msgid " LENGTH " msgstr " LÄNGE " #: tcl/mini.tcl:2132 ../tcl/mini.tcl:2129 msgid " DIAMETER " msgstr " DURCHMESSER " #: tcl/mini.tcl:2133 ../tcl/mini.tcl:2130 msgid " COMMENT " msgstr " BEMERKUNG " #: tcl/mini.tcl:2188 ../tcl/mini.tcl:2185 msgid "Add Extra Tool" msgstr "Werkzeug hinzufügen" #: tcl/mini.tcl:2189 ../tcl/mini.tcl:2186 msgid "Remove Last Tool" msgstr "Letztes Werkzeug löschen" #: tcl/mini.tcl:2217 tcl/mini.tcl:2253 ../tcl/mini.tcl:2214 #: ../tcl/mini.tcl:2250 #, tcl-format msgid "Can't update the tool file while machine is in auto and %s." msgstr "" "Die Werkzeugdatei kann nicht aktualisiert werden solange die Maschine im " "»auto«-Modus und »%s« ist." #: tcl/mini.tcl:2229 ../tcl/mini.tcl:2226 msgid "This is not a good number." msgstr "Es wurde kein gültiger Wert angegeben." #: tcl/mini.tcl:2293 ../tcl/mini.tcl:2290 msgid "" "COORDINATE SYSTEM SETUP \n" "\n" " Click value to edit with keyboard. Press enter to return to keyboard " "control of machine. \n" " " msgstr "" "KOORDINATENSYSTEM SETUP \n" "\n" "Wählen Sie mit der Maus oder der Tabulator-Taste den gewünschten Wert aus.\n" "Mit der Eingabetaste wird der Wert übernommen. " #: tcl/mini.tcl:2320 tcl/scripts/Set_Coordinates.tcl:80 ../tcl/mini.tcl:2317 #: ../tcl/scripts/Set_Coordinates.tcl:78 msgid "Axis " msgstr "Achse" #: tcl/mini.tcl:2321 ../tcl/mini.tcl:2318 msgid "Value " msgstr "Wert" #: tcl/mini.tcl:2326 tcl/scripts/Set_Coordinates.tcl:91 ../tcl/mini.tcl:2323 #: ../tcl/scripts/Set_Coordinates.tcl:88 msgid "Teach" msgstr "Anwenden" #: tcl/mini.tcl:2334 ../tcl/mini.tcl:2331 msgid "Write And Load File " msgstr "Speichern" #: tcl/mini.tcl:2336 ../tcl/mini.tcl:2333 msgid "Offset By Radius" msgstr "Offset über Radius" #: tcl/mini.tcl:2337 ../tcl/mini.tcl:2334 msgid "Offset By Length" msgstr "Offset über Länge" #: tcl/mini.tcl:2342 ../tcl/mini.tcl:2339 msgid "Subtract" msgstr "Abziehen" #: tcl/mini.tcl:2344 ../tcl/mini.tcl:2341 msgid "Add" msgstr "Dazuzählen" #: tcl/mini.tcl:2366 ../tcl/mini.tcl:2363 msgid "Zero All G54" msgstr "G54 auf Null setzen" #: tcl/mini.tcl:2367 ../tcl/mini.tcl:2364 msgid "Zero All G55" msgstr "G55 auf Null setzen" #: tcl/mini.tcl:2368 ../tcl/mini.tcl:2365 msgid "Zero All G56" msgstr "G56 auf Null setzen" #: tcl/mini.tcl:2369 ../tcl/mini.tcl:2366 msgid "Zero All G57" msgstr "G57 auf Null setzen" #: tcl/mini.tcl:2370 ../tcl/mini.tcl:2367 msgid "Zero All G58" msgstr "G58 auf Null setzen" #: tcl/mini.tcl:2371 ../tcl/mini.tcl:2368 msgid "Zero All G59" msgstr "G59 auf Null setzen" #: tcl/mini.tcl:2372 ../tcl/mini.tcl:2369 msgid "Zero All G59.1" msgstr "G59.1 auf Null setzen" #: tcl/mini.tcl:2373 ../tcl/mini.tcl:2370 msgid "Zero All G59.2" msgstr "G59.2 auf Null setzen" #: tcl/mini.tcl:2374 ../tcl/mini.tcl:2371 msgid "Zero All G59.3" msgstr "G59.3 auf Null setzen" #: tcl/mini.tcl:2375 ../tcl/mini.tcl:2372 msgid "Zero All ????" msgstr "Alle auf Null setzen ????" #: tcl/mini.tcl:2493 ../tcl/mini.tcl:2490 msgid "Modified..." msgstr "Geändert..." #: tcl/mini.tcl:2538 ../tcl/mini.tcl:2535 msgid "Save and Load" msgstr "Speichern und Beenden" #: tcl/mini.tcl:2540 ../tcl/mini.tcl:2537 msgid "Undo" msgstr "Rückgängig" #: tcl/mini.tcl:2541 ../tcl/mini.tcl:2538 msgid "Redo" msgstr "Wiederherstellen" #: tcl/mini.tcl:2546 src/emc/usr_intf/tooledit.tcl:488 ../tcl/mini.tcl:2543 msgid "Delete" msgstr "Löschen" #: tcl/mini.tcl:2551 ../tcl/mini.tcl:2548 msgid "Replace..." msgstr "Ersetzen..." #: tcl/mini.tcl:2664 ../tcl/mini.tcl:2661 msgid "Next Number: " msgstr "Startnummer:" #: tcl/mini.tcl:2765 ../tcl/mini.tcl:2762 msgid "Basic Help" msgstr "Hilfe" #: tcl/mini.tcl:2765 ../tcl/mini.tcl:2762 msgid "" "This is a simple ASCII editor like many others.\n" "\n" "Ctrl+O Open\n" "Ctrl+S Save\n" "Ctrl+Z Undo\n" "Ctrl+Y Redo\n" "Ctrl+X Cut\n" "Ctrl+C Copy\n" "Ctrl+V Paste\n" "Del Delete\n" "Ctrl+A Select All\n" "\n" "Ctrl+F Find\n" "Ctrl+R Replace " msgstr "" "Dies ist ein simpler Texteditor.\n" "\n" "Strg+O:\tÖffnen\n" "Strg+S:\tSpeichern\n" "Strg+Z:\tRückgängig\n" "Strg+Y:\tWiederherstellen\n" "Strg+X:\tAusschneiden\n" "Strg+C:\tKopieren\n" "Strg+V:\tEinfügen\n" "Entf:\tLöschen\n" "Strg+A:\tAlles makieren\n" "\n" "Strg+F:\tSuchen\n" "Strg+R:\tErsetzen " #: tcl/mini.tcl:2785 ../tcl/mini.tcl:2782 msgid "" "tknotepad by Joseph Acosta. \n" "\n" " Modified for EMC by: Paul Corner " msgstr "" "tknotepad by Joseph Acosta \n" "\n" "Modifiziert für EMC von: Paul Corner " #: tcl/mini.tcl:2793 ../tcl/mini.tcl:2790 msgid "" "The contents of this file may have changed, do you wish to to save your " "changes?" msgstr "" "Der Inhalt dieser Datei wurde wahrscheinlich geändert. Sollen die Änderungen " "gespeichert werden?" #: tcl/mini.tcl:2794 ../tcl/mini.tcl:2791 msgid "New Confirm?" msgstr "Änderungen bestätigen" #: tcl/mini.tcl:2928 ../tcl/mini.tcl:2925 msgid "Print Setup" msgstr "Drucker-Einstellungen" #: tcl/mini.tcl:2932 ../tcl/mini.tcl:2929 msgid "Print Command: " msgstr "Drucker-Befehl:" #: tcl/mini.tcl:3095 ../tcl/mini.tcl:3092 msgid "Find what:" msgstr "Suchen:" #: tcl/mini.tcl:3101 ../tcl/mini.tcl:3098 msgid "Replace with:" msgstr "Ersetzen mit:" #: tcl/mini.tcl:3109 ../tcl/mini.tcl:3106 msgid "Find Next" msgstr "Weitersuchen" #: tcl/mini.tcl:3112 ../tcl/mini.tcl:3109 msgid "Replace" msgstr "Ersetzen" #: tcl/mini.tcl:3120 ../tcl/mini.tcl:3117 msgid "Up" msgstr "Aufwärts" #: tcl/mini.tcl:3121 ../tcl/mini.tcl:3118 msgid "Down" msgstr "Abwärts" #: tcl/mini.tcl:3124 ../tcl/mini.tcl:3121 msgid "Match case" msgstr "Groß-/Kleinschreibung beachten" #: tcl/mini.tcl:3569 ../tcl/mini.tcl:3566 msgid "rot-x" msgstr "Rot-X" #: tcl/mini.tcl:3579 ../tcl/mini.tcl:3576 msgid "rot-y" msgstr "Rot-Y" #: tcl/mini.tcl:3589 ../tcl/mini.tcl:3586 msgid "rot-z" msgstr "Rot-Z" #: tcl/mini.tcl:3599 ../tcl/mini.tcl:3596 msgid "zoom" msgstr "Zoom" #: tcl/mini.tcl:3655 ../tcl/mini.tcl:3652 msgid "TEST" msgstr "TEST" #: tcl/mini.tcl:3699 ../tcl/mini.tcl:3696 msgid "Hide Setup" msgstr "Optionen ausbl." #: tcl/mini.tcl:3703 ../tcl/mini.tcl:3700 msgid "Show Setup" msgstr "Optionen anz." #: tcl/show_errors.tcl:41 #, fuzzy msgid "LinuxCNC Errors" msgstr "Fehler" #: tcl/show_errors.tcl:44 #, fuzzy msgid "" "LinuxCNC terminated with an error. When reporting problems, please include " "all the information below in your message." msgstr "" "EMC2 wurde mit einem Fehler beendet. Falls Sie den Fehler melden wollen, " "fügen Sie bitte Ihrer Mitteilung die unten stehenden Informationen bei." #: tcl/show_errors.tcl:69 tcl/scripts/Set_Coordinates.tcl:103 #: ../tcl/show_errors.tcl:69 ../tcl/scripts/Set_Coordinates.tcl:99 msgid "Close" msgstr "Beenden" #: tcl/tklinuxcnc.tcl:154 tcl/tklinuxcnc.tcl:181 ../tcl/tkemc.tcl:209 #: ../tcl/tkemc.tcl:236 msgid "Set Run Mark" msgstr "Startpunkt setzen" #: tcl/tklinuxcnc.tcl:156 ../tcl/tkemc.tcl:211 #, tcl-format msgid "Set run mark at line %s?" msgstr "Startpunkt in Zeile %s setzen?" #: tcl/tklinuxcnc.tcl:176 tcl/tklinuxcnc.tcl:204 ../tcl/tkemc.tcl:231 #: ../tcl/tkemc.tcl:254 ../tcl/tkemc.tcl:277 msgid "untitled" msgstr "unbenannt" #: tcl/tklinuxcnc.tcl:212 ../tcl/tkemc.tcl:285 msgid "Load Parameter File" msgstr "Speichern" #: tcl/tklinuxcnc.tcl:261 #, fuzzy msgid "LinuxCNC Diagnostics" msgstr "EMC2 Diagnose" #: tcl/tklinuxcnc.tcl:263 ../tcl/tkemc.tcl:336 msgid "Task" msgstr "Prozess" #: tcl/tklinuxcnc.tcl:265 tcl/tklinuxcnc.tcl:288 tcl/tklinuxcnc.tcl:311 #: ../tcl/tkemc.tcl:338 ../tcl/tkemc.tcl:361 ../tcl/tkemc.tcl:384 msgid "Heartbeat:" msgstr "Takt:" #: tcl/tklinuxcnc.tcl:268 tcl/tklinuxcnc.tcl:291 tcl/tklinuxcnc.tcl:314 #: ../tcl/tkemc.tcl:341 ../tcl/tkemc.tcl:364 ../tcl/tkemc.tcl:387 msgid "Command:" msgstr "Befehlskennung:" #: tcl/tklinuxcnc.tcl:271 tcl/tklinuxcnc.tcl:294 tcl/tklinuxcnc.tcl:317 #: ../tcl/tkemc.tcl:344 ../tcl/tkemc.tcl:367 ../tcl/tkemc.tcl:390 msgid "Command #:" msgstr "Befehlsnummer:" #: tcl/tklinuxcnc.tcl:274 tcl/tklinuxcnc.tcl:297 tcl/tklinuxcnc.tcl:320 #: ../tcl/tkemc.tcl:347 ../tcl/tkemc.tcl:370 ../tcl/tkemc.tcl:393 msgid "Status:" msgstr "Status:" #: tcl/tklinuxcnc.tcl:286 ../tcl/tkemc.tcl:359 msgid "Io" msgstr "Ein-/Ausgänge" #: tcl/tklinuxcnc.tcl:309 ../tcl/tkemc.tcl:382 msgid "Motion" msgstr "Achssteuerung" #: tcl/tklinuxcnc.tcl:350 #, fuzzy msgid "About TkLinuxCNC" msgstr "Über TkEditor" #: tcl/tklinuxcnc.tcl:351 #, fuzzy msgid "" "TkLinuxcnc\n" "\n" "Tcl/Tk GUI for LinuxCNC\n" "\n" "GPL Version 2 (2012)" msgstr "" "TkEmc\n" "\n" "Grafische Oberfläche in Tcl/Tk für den\n" "»Enhanced Machine Controller«, Version 2 (EMC2)\n" "\n" "\n" "GPL Version 2 (2006)" #: tcl/tklinuxcnc.tcl:399 ../tcl/tkemc.tcl:444 msgid "Set Tool Offset" msgstr "Werkzeugoffset" #: tcl/tklinuxcnc.tcl:404 tcl/tklinuxcnc.tcl:905 ../tcl/tkemc.tcl:452 #: ../tcl/tkemc.tcl:957 msgid "Tool:" msgstr "Werkzeug:" #: tcl/tklinuxcnc.tcl:722 ../tcl/tkemc.tcl:775 msgid "Edit..." msgstr "Bearbeiten..." #: tcl/tklinuxcnc.tcl:727 ../tcl/tkemc.tcl:780 msgid "Tool Table Editor..." msgstr "Werkzeugtabelle bearbeiten..." #: tcl/tklinuxcnc.tcl:730 src/emc/usr_intf/touchy/touchy.glade:1383 #, fuzzy msgid "Reload Tool Table" msgstr "Speichern" #: tcl/tklinuxcnc.tcl:740 ../tcl/tkemc.tcl:792 msgid "Offsets and Variables..." msgstr "Parameterdatei..." #: tcl/tklinuxcnc.tcl:741 ../tcl/tkemc.tcl:793 msgid "Diagnostics..." msgstr "Diagnose..." #: tcl/tklinuxcnc.tcl:742 ../tcl/tkemc.tcl:794 msgid "Backplot..." msgstr "Backplot..." #: tcl/tklinuxcnc.tcl:748 ../tcl/tkemc.tcl:800 msgid "Testing..." msgstr "Testen..." #: tcl/tklinuxcnc.tcl:749 ../tcl/tkemc.tcl:801 msgid "Debug..." msgstr "Debug..." #: tcl/tklinuxcnc.tcl:750 ../tcl/tkemc.tcl:802 msgid "Font..." msgstr "Schrift..." #: tcl/tklinuxcnc.tcl:754 src/emc/usr_intf/axis/scripts/image-to-gcode.py:665 #: ../tcl/tkemc.tcl:806 emc/usr_intf/axis/scripts/image-to-gcode.py:656 msgid "Units" msgstr "Maßeinheit" #: ../tcl/tkemc.tcl:807 msgid "auto" msgstr "Auto" #: tcl/tklinuxcnc.tcl:756 src/emc/usr_intf/pncconf/pncconf.py:8512 #: ../tcl/tkemc.tcl:808 emc/usr_intf/pncconf/pncconf.py:3329 #: emc/usr_intf/pncconf/pncconf.py:3337 emc/usr_intf/pncconf/pncconf.py:3338 #: emc/usr_intf/pncconf/pncconf.py:4176 msgid "inches" msgstr "inch" #: tcl/tklinuxcnc.tcl:757 src/emc/usr_intf/axis/scripts/axis.py:1543 #: src/emc/usr_intf/axis/scripts/axis.py:1713 #: src/emc/usr_intf/touchy/touchy.glade:3301 #: src/emc/usr_intf/stepconf/stepconf.py:1685 #: src/emc/usr_intf/stepconf/stepconf.py:2221 #: src/emc/usr_intf/stepconf/stepconf.glade:4357 #: src/emc/usr_intf/pncconf/pncconf.py:8508 #: src/emc/usr_intf/pncconf/pncconf.glade:2229 #: src/emc/usr_intf/pncconf/pncconf.glade:2394 #: src/emc/usr_intf/pncconf/pncconf.glade:57616 #: src/emc/usr_intf/pncconf/pncconf.glade:57688 #: src/emc/usr_intf/pncconf/pncconf.glade:60646 #: src/emc/usr_intf/pncconf/pncconf.glade:61739 #: src/emc/usr_intf/pncconf/pncconf.glade:62832 #: src/emc/usr_intf/pncconf/pncconf.glade:63925 #: src/emc/usr_intf/pncconf/pncconf.glade:65091 #: src/emc/usr_intf/axis/scripts/axis.py:1556 #: src/emc/usr_intf/axis/scripts/axis.py:1726 ../tcl/tkemc.tcl:809 #: emc/usr_intf/axis/scripts/axis.py:2381 #: emc/usr_intf/axis/scripts/axis.py:2528 #: emc/usr_intf/stepconf/stepconf.py:1495 #: emc/usr_intf/stepconf/stepconf.py:2079 #: emc/usr_intf/stepconf/stepconf.glade:3999 #: emc/usr_intf/pncconf/pncconf.py:3310 emc/usr_intf/pncconf/pncconf.py:3318 #: emc/usr_intf/pncconf/pncconf.py:3319 emc/usr_intf/pncconf/pncconf.py:4172 #: emc/usr_intf/pncconf/pncconf.glade:15668 #: emc/usr_intf/pncconf/pncconf.glade:15755 #: emc/usr_intf/pncconf/pncconf.glade:17901 #: emc/usr_intf/pncconf/pncconf.glade:20518 #: emc/usr_intf/pncconf/pncconf.glade:21537 #: emc/usr_intf/pncconf/pncconf.glade:22237 #: emc/usr_intf/pncconf/pncconf.glade:22937 msgid "mm" msgstr "mm" #: tcl/tklinuxcnc.tcl:758 ../tcl/tkemc.tcl:810 msgid "cm" msgstr "cm" #: tcl/tklinuxcnc.tcl:762 ../tcl/tkemc.tcl:814 msgid "Utilities" msgstr "Hilfsmittel" #: tcl/tklinuxcnc.tcl:763 ../tcl/tkemc.tcl:815 msgid "Hal Scope" msgstr "HAL-Scope" #: tcl/tklinuxcnc.tcl:785 ../tcl/tkemc.tcl:837 msgid "HAL Show" msgstr "HAL anzeigen..." #: tcl/tklinuxcnc.tcl:786 ../tcl/tkemc.tcl:838 msgid "HAL Config" msgstr "HAL konfigurieren..." #: tcl/tklinuxcnc.tcl:792 ../tcl/tkemc.tcl:844 msgid "Balloon help" msgstr "Popup-Hilfe" #: tcl/tklinuxcnc.tcl:815 ../tcl/tkemc.tcl:867 msgid "Estop on" msgstr "Notaus gesetzt" #: tcl/tklinuxcnc.tcl:816 ../tcl/tkemc.tcl:868 msgid "Estop off" msgstr "Notaus zurückgesetzt" #: tcl/tklinuxcnc.tcl:818 ../tcl/tkemc.tcl:870 msgid "Machine on" msgstr "Maschine an" #: tcl/tklinuxcnc.tcl:819 ../tcl/tkemc.tcl:871 msgid "Machine off" msgstr "Maschine aus" #: tcl/tklinuxcnc.tcl:826 src/emc/usr_intf/touchy/touchy.glade:1561 #: ../tcl/tkemc.tcl:878 msgid "Manual" msgstr "Manuell" #: tcl/tklinuxcnc.tcl:835 ../tcl/tkemc.tcl:887 msgid "Mist on" msgstr "Nebel an" #: tcl/tklinuxcnc.tcl:836 ../tcl/tkemc.tcl:888 msgid "Mist off" msgstr "Nebel aus" #: tcl/tklinuxcnc.tcl:843 ../tcl/tkemc.tcl:895 msgid "Flood on" msgstr "Kühlmittel an" #: tcl/tklinuxcnc.tcl:844 ../tcl/tkemc.tcl:896 msgid "Flood off" msgstr "Kühlmittel aus" #: tcl/tklinuxcnc.tcl:851 ../tcl/tkemc.tcl:903 msgid "Lube on" msgstr "Schmieröl an" #: tcl/tklinuxcnc.tcl:852 ../tcl/tkemc.tcl:904 msgid "Lube off" msgstr "Schmieröl aus" #: tcl/tklinuxcnc.tcl:869 ../tcl/tkemc.tcl:921 msgid "Spindle forward" msgstr "Spindel vor" #: tcl/tklinuxcnc.tcl:870 ../tcl/tkemc.tcl:922 msgid "Spindle reverse" msgstr "Spindel zurück" #: tcl/tklinuxcnc.tcl:885 ../tcl/tkemc.tcl:937 msgid "Brake on" msgstr "Bremse an" #: tcl/tklinuxcnc.tcl:886 ../tcl/tkemc.tcl:938 msgid "Brake off" msgstr "Bremse aus" #: tcl/tklinuxcnc.tcl:907 ../tcl/tkemc.tcl:959 msgid "Offset:" msgstr "Werkzeugoffset:" #: tcl/tklinuxcnc.tcl:913 ../tcl/tkemc.tcl:961 msgid "Work Offsets:" msgstr "Arbeitsoffset:" #: tcl/tklinuxcnc.tcl:1233 ../tcl/tkemc.tcl:1274 msgid "relative" msgstr "Relativ" #: tcl/tklinuxcnc.tcl:1234 ../tcl/tkemc.tcl:1275 msgid "machine" msgstr "Maschine" #: tcl/tklinuxcnc.tcl:1236 ../tcl/tkemc.tcl:1277 msgid "actual" msgstr "- Aktuell" #: tcl/tklinuxcnc.tcl:1237 ../tcl/tkemc.tcl:1278 msgid "commanded" msgstr "- Erwartet" #: tcl/tklinuxcnc.tcl:1239 ../tcl/tkemc.tcl:1280 msgid "joint" msgstr "Achse" #: tcl/tklinuxcnc.tcl:1240 ../tcl/tkemc.tcl:1281 msgid "world" msgstr "Global" #: tcl/tklinuxcnc.tcl:1333 ../tcl/tkemc.tcl:1374 msgid "Axis Offset" msgstr "Achsoffset" #: tcl/tklinuxcnc.tcl:1335 ../tcl/tkemc.tcl:1376 msgid "Set axis value:" msgstr "Achsoffset:" #: tcl/tklinuxcnc.tcl:1429 ../tcl/tkemc.tcl:1470 msgid "Set Feed Override" msgstr "Vorschubübersteuerung" #: tcl/tklinuxcnc.tcl:1435 ../tcl/tkemc.tcl:1476 msgid "Set feed override:" msgstr "Vorschubübersteuerung:" #: tcl/tklinuxcnc.tcl:1460 ../tcl/tkemc.tcl:1501 msgid "Set Spindle Override" msgstr "Spindelübersteuerung" #: tcl/tklinuxcnc.tcl:1466 ../tcl/tkemc.tcl:1507 msgid "Set spindle speed override:" msgstr "Spindelübersteuerung:" #: tcl/tklinuxcnc.tcl:1521 ../tcl/tkemc.tcl:1562 msgid "Linear Jog Speed" msgstr "Lineare Schrittgeschwindigkeit" #: tcl/tklinuxcnc.tcl:1552 ../tcl/tkemc.tcl:1593 msgid "Angular Jog Speed (deg)/min:" msgstr "Winkel-Schrittgeschwindigkeit Grad/min:" #: tcl/tklinuxcnc.tcl:1596 ../tcl/tkemc.tcl:1637 msgid "Spindle speed Override:" msgstr "Spindelübersteuerung:" #: tcl/tklinuxcnc.tcl:1642 ../tcl/tkemc.tcl:1683 msgid "Program: " msgstr "Programm: " #: tcl/tklinuxcnc.tcl:1647 ../tcl/tkemc.tcl:1688 msgid " - Status: " msgstr " - Status: " #: tcl/tklinuxcnc.tcl:1663 ../tcl/tkemc.tcl:1704 msgid "Optional Stop" msgstr "Wahlweiser Halt" #: tcl/tklinuxcnc.tcl:2010 ../tcl/tkemc.tcl:2051 msgid "Error" msgstr "Fehler" #: tcl/tklinuxcnc.tcl:2070 tcl/ngcgui_ttt.tcl:46 ../tcl/tkemc.tcl:2111 msgid "Set Font" msgstr "Schrift auswählen" #: tcl/tklinuxcnc.tcl:2079 tcl/ngcgui_ttt.tcl:283 ../tcl/tkemc.tcl:2120 msgid "Font" msgstr "Schriftart" #: tcl/tklinuxcnc.tcl:2086 ../tcl/tkemc.tcl:2127 msgid "Size" msgstr "Größe" #: tcl/tklinuxcnc.tcl:2093 ../tcl/tkemc.tcl:2134 msgid "Style" msgstr "Stil" #: tcl/tklinuxcnc.tcl:2229 share/axis/tcl/axis.tcl:1916 ../tcl/tkemc.tcl:2270 #: ../share/axis/tcl/axis.tcl:1873 msgid "ESTOP" msgstr "NOTAUS" #: tcl/tklinuxcnc.tcl:2231 tcl/ngcgui.tcl:2840 share/axis/tcl/axis.tcl:1918 #: ../tcl/tkemc.tcl:2272 ../share/axis/tcl/axis.tcl:1875 msgid "ON" msgstr "AN" #: tcl/tklinuxcnc.tcl:2290 ../tcl/tkemc.tcl:2331 msgid "LUBE ON" msgstr "SCHMIERM. AN" #: tcl/tklinuxcnc.tcl:2292 ../tcl/tkemc.tcl:2333 msgid "LUBE OFF" msgstr "SCHMIERM. AUS" #: tcl/tklinuxcnc.tcl:2294 ../tcl/tkemc.tcl:2335 msgid "LUBE ?" msgstr "SCHMIERM. AN" #: tcl/scripts/Set_Coordinates.tcl:23 #, fuzzy msgid "LinuxCNC Set Coordinate" msgstr "EMC2 Koordinaten-Setup" #: tcl/scripts/Set_Coordinates.tcl:26 ../tcl/scripts/Set_Coordinates.tcl:26 msgid "Coordinate System Control Window" msgstr "Koordinatensystem Kontroll-Fenster" #: tcl/scripts/Set_Coordinates.tcl:81 ../tcl/scripts/Set_Coordinates.tcl:79 msgid "Var # " msgstr "Variable" #: tcl/scripts/Set_Coordinates.tcl:82 ../tcl/scripts/Set_Coordinates.tcl:80 msgid "Offset Value " msgstr "Aktueller Wert" #: tcl/scripts/Set_Coordinates.tcl:83 ../tcl/scripts/Set_Coordinates.tcl:81 msgid "What to Teach" msgstr "Neuen Wert eingeben:" #: tcl/scripts/Set_Coordinates.tcl:101 ../tcl/scripts/Set_Coordinates.tcl:97 msgid "Set Old" msgstr "Alten Wert" #: tcl/scripts/Set_Coordinates.tcl:102 ../tcl/scripts/Set_Coordinates.tcl:98 msgid "Set Zero" msgstr "Null setzen" #: tcl/scripts/Set_Coordinates.tcl:104 ../tcl/scripts/Set_Coordinates.tcl:100 msgid "Write" msgstr "Speichern" #: tcl/ngcgui.tcl:467 msgid "Need non-null file name" msgstr "" #: tcl/ngcgui.tcl:543 msgid "Disallowed use of ngcgui generated file as Subfile" msgstr "" #: tcl/ngcgui.tcl:549 msgid "" "marked (not_a_subfile)\n" "Not intended for use as a subfile" msgstr "" #: tcl/ngcgui.tcl:564 msgid "Multiple subroutines in file not allowed" msgstr "" #: tcl/ngcgui.tcl:573 tcl/ngcgui.tcl:595 tcl/ngcgui.tcl:608 tcl/ngcgui.tcl:650 #: tcl/ngcgui.tcl:755 msgid "bogus" msgstr "" #: tcl/ngcgui.tcl:575 msgid "sub label" msgstr "" #: tcl/ngcgui.tcl:575 tcl/ngcgui.tcl:652 #, fuzzy msgid "does not match subroutine file name" msgstr "Zu viele Ebenen für die Unterfunktion" #: tcl/ngcgui.tcl:590 tcl/ngcgui.tcl:591 msgid "ignoring M2 after endsub" msgstr "" #: tcl/ngcgui.tcl:596 msgid "file contains lines after subend" msgstr "" #: tcl/ngcgui.tcl:609 msgid "file contains lines before sub" msgstr "" #: tcl/ngcgui.tcl:652 msgid "endsub label" msgstr "" #: tcl/ngcgui.tcl:757 msgid "out of sequence positional parameter" msgstr "" #: tcl/ngcgui.tcl:757 msgid "expected" msgstr "" #: tcl/ngcgui.tcl:817 msgid "toomany" msgstr "" #: tcl/ngcgui.tcl:868 msgid "no sub found in file" msgstr "" #: tcl/ngcgui.tcl:871 msgid "no endsub found in file" msgstr "" #: tcl/ngcgui.tcl:961 #, fuzzy msgid "Choose Files" msgstr "Werkzeugdatei" #: tcl/ngcgui.tcl:1100 #, fuzzy msgid "Controls" msgstr "Strg-M" #: tcl/ngcgui.tcl:1109 msgid "Preamble" msgstr "" #: tcl/ngcgui.tcl:1122 msgid "Subfile" msgstr "" #: tcl/ngcgui.tcl:1134 msgid "Postamble" msgstr "" #: tcl/ngcgui.tcl:1151 msgid "Retain values on Subfile read" msgstr "" #: tcl/ngcgui.tcl:1159 #, fuzzy msgid "Expand subroutine" msgstr "Menübaum aufklappen" #: tcl/ngcgui.tcl:1168 tcl/ngcgui.tcl:2414 #, fuzzy msgid "Autosend" msgstr "Auto" #: tcl/ngcgui.tcl:1178 #, fuzzy msgid "Verbose ngcfile" msgstr "NC Dateien" #: tcl/ngcgui.tcl:1188 tcl/ngcgui.tcl:2235 tcl/ngcgui.tcl:2259 #: tcl/ngcgui.tcl:2289 msgid "Create Feature" msgstr "" #: tcl/ngcgui.tcl:1194 tcl/ngcgui.tcl:2919 #, fuzzy msgid "MakeFile" msgstr "Datei" #: tcl/ngcgui.tcl:1195 tcl/ngcgui.tcl:2916 msgid "Finalize" msgstr "" #: tcl/ngcgui.tcl:1212 #, fuzzy msgid "Reread" msgstr "Thread" #: tcl/ngcgui.tcl:1231 msgid "SendFileToAxis" msgstr "" #: tcl/ngcgui.tcl:1274 msgid "Unrecoverable problem" msgstr "" #: tcl/ngcgui.tcl:1374 msgid "Postamble file" msgstr "" #: tcl/ngcgui.tcl:1424 msgid "Subroutine file" msgstr "" #: tcl/ngcgui.tcl:1482 #, fuzzy msgid "Positional Parameters" msgstr "Para_meter" #: tcl/ngcgui.tcl:1587 msgid "_Globals" msgstr "" #: tcl/ngcgui.tcl:1690 msgid "No Subfile specified" msgstr "" #: tcl/ngcgui.tcl:1692 #, fuzzy msgid "No parameters yet" msgstr "Para_meter" #: tcl/ngcgui.tcl:1701 msgid "Missing value for parm" msgstr "" #: tcl/ngcgui.tcl:1735 msgid "Output file" msgstr "" #: tcl/ngcgui.tcl:1827 msgid "Positional parameters for" msgstr "" #: tcl/ngcgui.tcl:1835 #, fuzzy msgid "expanded file" msgstr "Menübaum aufklappen" #: tcl/ngcgui.tcl:1849 #, fuzzy msgid "call subroutine file" msgstr "Zu viele Ebenen für die Unterfunktion" #: tcl/ngcgui.tcl:1919 msgid "Multiple Tabs with Features" msgstr "" #: tcl/ngcgui.tcl:1920 msgid "Finalize all Tabs?" msgstr "" #: tcl/ngcgui.tcl:1920 msgid "Order" msgstr "" #: tcl/ngcgui.tcl:1922 msgid "No, just this page" msgstr "" #: tcl/ngcgui.tcl:1936 msgid "Axis is not responding" msgstr "" #: tcl/ngcgui.tcl:1937 #, fuzzy msgid "Error: " msgstr "Fehler" #: tcl/ngcgui.tcl:1939 msgid "Autosend disabled, Ctrl-A toggles autosend" msgstr "" #: tcl/ngcgui.tcl:1941 msgid "File saving enabled -- Finalize to save" msgstr "" #: tcl/ngcgui.tcl:1957 msgid "Require .ngc suffix for filename" msgstr "" #: tcl/ngcgui.tcl:1967 msgid "Disallowed overwrite of" msgstr "" #: tcl/ngcgui.tcl:1986 msgid "FEATURE" msgstr "" #: tcl/ngcgui.tcl:1993 msgid "feature line added" msgstr "" #: tcl/ngcgui.tcl:2002 msgid "line added" msgstr "" #: tcl/ngcgui.tcl:2002 msgid "activated" msgstr "" #: tcl/ngcgui.tcl:2004 #, fuzzy msgid "restores" msgstr "Ausprobieren" #: tcl/ngcgui.tcl:2041 msgid "NOTREACHED mode" msgstr "" #: tcl/ngcgui.tcl:2236 msgid "Enter parms for 1st feature" msgstr "" #: tcl/ngcgui.tcl:2243 #, fuzzy msgid "New Outfile" msgstr "NC Dateien" #: tcl/ngcgui.tcl:2245 msgid "Ready to make New Outfile" msgstr "" #: tcl/ngcgui.tcl:2262 tcl/ngcgui.tcl:2295 msgid "Enter parms for feature " msgstr "" #: tcl/ngcgui.tcl:2282 msgid "feature" msgstr "" #: tcl/ngcgui.tcl:2287 msgid "Create Next" msgstr "" #: tcl/ngcgui.tcl:2292 msgid "Created feature " msgstr "" #: tcl/ngcgui.tcl:2316 #, fuzzy msgid "option" msgstr "Achssteuerung" #: tcl/ngcgui.tcl:2327 #, fuzzy msgid "Missing parameters" msgstr "Para_meter" #: tcl/ngcgui.tcl:2331 #, fuzzy msgid "Parse Error" msgstr "Fehler" #: tcl/ngcgui.tcl:2338 msgid "Null Preamble" msgstr "" #: tcl/ngcgui.tcl:2343 msgid "Read Preamble" msgstr "" #: tcl/ngcgui.tcl:2347 msgid "Preamble Error" msgstr "" #: tcl/ngcgui.tcl:2352 msgid "Null Postamble" msgstr "" #: tcl/ngcgui.tcl:2357 msgid "Read Postamble" msgstr "" #: tcl/ngcgui.tcl:2361 msgid "Postamble Error" msgstr "" #: tcl/ngcgui.tcl:2366 msgid "Read Subfile" msgstr "" #: tcl/ngcgui.tcl:2371 #, fuzzy msgid "Write Error" msgstr "Fehler" #: tcl/ngcgui.tcl:2375 msgid "Outfile set" msgstr "" #: tcl/ngcgui.tcl:2380 msgid "Finished" msgstr "" #: tcl/ngcgui.tcl:2385 #, fuzzy msgid "Canceled" msgstr "Abbrechen" #: tcl/ngcgui.tcl:2391 msgid "Sent" msgstr "" #: tcl/ngcgui.tcl:2395 #, fuzzy msgid "SendFileToAxis failed" msgstr "Konvertierung fehlgeschlagen" #: tcl/ngcgui.tcl:2399 msgid "Ctrl-k for Key bindings" msgstr "" #: tcl/ngcgui.tcl:2403 #, fuzzy msgid "Expand sub" msgstr "Pins aufklappen" #: tcl/ngcgui.tcl:2407 #, fuzzy msgid "Retain values" msgstr "Achsoffset:" #: tcl/ngcgui.tcl:2411 msgid "Verbose" msgstr "" #: tcl/ngcgui.tcl:2417 msgid "Finalize Canceled" msgstr "" #: tcl/ngcgui.tcl:2572 tcl/ngcgui.tcl:2728 msgid "Dismiss" msgstr "" #: tcl/ngcgui.tcl:2577 msgid "ngcgui Error" msgstr "" #: tcl/ngcgui.tcl:2600 msgid "Declining support for tk send bug in ngcgui" msgstr "" #: tcl/ngcgui.tcl:2601 msgid "You should upgrade linuxcnc to >= linuxcnc2.5" msgstr "" #: tcl/ngcgui.tcl:2645 msgid "pre2.4_send_file_to_axis:error" msgstr "" #: tcl/ngcgui.tcl:2839 share/axis/tcl/axis.tcl:1917 #: ../share/axis/tcl/axis.tcl:1874 msgid "OFF" msgstr "AUS" #: tcl/ngcgui.tcl:2842 #, fuzzy msgid "Toggle autosend" msgstr "Kühlmittel an/aus" #: tcl/ngcgui.tcl:2843 tcl/ngcgui.tcl:3057 #, fuzzy msgid "Clear entries" msgstr "Mitteilungen löschen" #: tcl/ngcgui.tcl:2844 msgid "Set entries to default values" msgstr "" #: tcl/ngcgui.tcl:2845 tcl/ngcgui.tcl:2859 tcl/ngcgui.tcl:2861 msgid "Open editor specified by" msgstr "" #: tcl/ngcgui.tcl:2846 msgid "on last outfile" msgstr "" #: tcl/ngcgui.tcl:2847 #, fuzzy msgid "toggle expand subroutines" msgstr "Zu viele Ebenen für die Unterfunktion" #: tcl/ngcgui.tcl:2848 msgid "Create feature" msgstr "" #: tcl/ngcgui.tcl:2849 msgid "Finalize (AUTO send is" msgstr "" #: tcl/ngcgui.tcl:2850 msgid "Show key bindings" msgstr "" #: tcl/ngcgui.tcl:2851 msgid "Restart (cancel pending)" msgstr "" #: tcl/ngcgui.tcl:2852 msgid "(re)Read Preamble" msgstr "" #: tcl/ngcgui.tcl:2853 msgid "(re)Read Postamble" msgstr "" #: tcl/ngcgui.tcl:2854 msgid "(re)Read Subfile" msgstr "" #: tcl/ngcgui.tcl:2855 msgid "toggle retain values" msgstr "" #: tcl/ngcgui.tcl:2856 msgid "toggle output file verbosity" msgstr "" #: tcl/ngcgui.tcl:2857 #, fuzzy msgid "Show status" msgstr "Neustart anzeigen" #: tcl/ngcgui.tcl:2858 msgid "Show full status (debug info)" msgstr "" #: tcl/ngcgui.tcl:2860 #, fuzzy msgid "on current subfile" msgstr "Aktuelle Datei neu laden [Strg-R]" #: tcl/ngcgui.tcl:2862 msgid "on current preamble" msgstr "" #: tcl/ngcgui.tcl:2865 msgid " Escape Return to Preview page" msgstr "" #: tcl/ngcgui.tcl:2942 msgid "Editing requires setting for environmental variable VISUAL" msgstr "" #: tcl/ngcgui.tcl:2943 msgid "Trying gedit" msgstr "" #: tcl/ngcgui.tcl:2955 #, fuzzy msgid "No file available for editing yet" msgstr "" "Angabe eines nicht-ganzzahligen Wertes, obwohl eine Ganzzahl erwartet wurde" #: tcl/ngcgui.tcl:2964 tcl/ngcgui.tcl:2973 #, fuzzy msgid "No file available for editing" msgstr "" "Angabe eines nicht-ganzzahligen Wertes, obwohl eine Ganzzahl erwartet wurde" #: tcl/ngcgui.tcl:2990 #, fuzzy msgid "Status items" msgstr "Status:" #: tcl/ngcgui.tcl:3003 msgid "All-page opt items" msgstr "" #: tcl/ngcgui.tcl:3009 msgid "any-items" msgstr "" #: tcl/ngcgui.tcl:3046 #, fuzzy msgid "Set defaults" msgstr "Benutzen der Standartwerte" #: tcl/ngcgui.tcl:3125 msgid "not writable" msgstr "" #: tcl/ngcgui.tcl:3263 tcl/ngcgui.tcl:3443 #, fuzzy msgid "new" msgstr "Neu" #: tcl/ngcgui.tcl:3288 msgid "Open a new Subfile" msgstr "" #: tcl/ngcgui.tcl:3434 msgid "remove" msgstr "" #: tcl/ngcgui.tcl:3456 tcl/ngcgui.tcl:3462 msgid "move" msgstr "" #: tcl/ngcgui.tcl:3561 src/emc/usr_intf/pncconf/pncconf.py:7022 #: src/emc/usr_intf/pncconf/pncconf.py:7139 #: src/emc/usr_intf/pncconf/pncconf.py:7306 #: emc/usr_intf/pncconf/pncconf.py:3240 emc/usr_intf/pncconf/pncconf.py:3414 #, fuzzy msgid "Custom" msgstr "Ausschneiden" #: tcl/ngcgui.tcl:3587 msgid "Problem creating page" msgstr "" #: tcl/ngcgui.tcl:3594 msgid "entrykeybindings not available" msgstr "" #: tcl/ngcgui.tcl:3633 msgid "Found multiple matches for" msgstr "" #: tcl/ngcgui.tcl:3634 msgid "using path" msgstr "" #: tcl/ngcgui.tcl:3642 src/emc/usr_intf/axis/scripts/axis.py:2242 #: src/emc/usr_intf/axis/scripts/axis.py:2255 #: src/emc/usr_intf/axis/scripts/axis.py:2268 msgid "Warning" msgstr "" #: tcl/ngcgui.tcl:3643 msgid "File absolute path specifier conflicts with searchpath result" msgstr "" #: tcl/ngcgui.tcl:3644 msgid "Absolute Specifier" msgstr "" #: tcl/ngcgui.tcl:3645 msgid "Using Search Result" msgstr "" #: tcl/ngcgui.tcl:3650 msgid "File not in Search Path" msgstr "" #: tcl/ngcgui.tcl:3652 msgid "Must be in search path" msgstr "" #: tcl/ngcgui.tcl:3654 msgid "(File found -- not in search path)" msgstr "" #: tcl/ngcgui.tcl:3656 #, fuzzy msgid "Current directory" msgstr "Verzeichnis:" #: tcl/ngcgui.tcl:3657 msgid "Search path" msgstr "" #: tcl/ngcgui.tcl:3663 msgid "Check setting for" msgstr "" #: tcl/ngcgui.tcl:3664 #, fuzzy msgid "in ini file" msgstr "(keine Datei)" #: tcl/ngcgui.tcl:3665 msgid "(Restart required after fixing ini file)" msgstr "" #: tcl/ngcgui.tcl:3680 #, fuzzy msgid "Try to Continue" msgstr "Fortsetzen" #: tcl/ngcgui.tcl:3685 #, fuzzy msgid "Ngcgui Configuration File Not Found" msgstr "Konfiguration öffnen" #: tcl/ngcgui.tcl:3765 msgid "Missing Tcl Package Img" msgstr "" #: tcl/ngcgui.tcl:3766 msgid "Please install Img" msgstr "" #: tcl/ngcgui.tcl:3965 #, fuzzy msgid "ini file" msgstr "(keine Datei)" #: tcl/ngcgui.tcl:3973 msgid "not found" msgstr "" #: tcl/ngcgui_ttt.tcl:67 msgid "found truetype-tracer v4 -OK" msgstr "" #: tcl/ngcgui_ttt.tcl:70 msgid "Note truetype-tracer v4 is required" msgstr "" #: tcl/ngcgui_ttt.tcl:71 msgid "Note: truetype-tracer v4 is required" msgstr "" #: tcl/ngcgui_ttt.tcl:81 msgid "ngcgui_app.tcl must be loaded before" msgstr "" #: tcl/ngcgui_ttt.tcl:89 msgid "Create a subroutine file from truetype-tracer (V4 reqd)" msgstr "" #: tcl/ngcgui_ttt.tcl:102 tcl/ngcgui_ttt.tcl:115 #, fuzzy msgid "problem with" msgstr "Ersetzen mit:" #: tcl/ngcgui_ttt.tcl:106 #, fuzzy msgid "No entry for" msgstr "Kein Fehler" #: tcl/ngcgui_ttt.tcl:109 msgid "wrong version of truetype-tracer" msgstr "" #: tcl/ngcgui_ttt.tcl:125 msgid "not writable, using" msgstr "" #: tcl/ngcgui_ttt.tcl:125 msgid "and setting expandsub" msgstr "" #: tcl/ngcgui_ttt.tcl:161 msgid "Text" msgstr "" #: tcl/ngcgui_ttt.tcl:171 msgid "Linescale" msgstr "" #: tcl/ngcgui_ttt.tcl:177 msgid "none" msgstr "" #: tcl/ngcgui_ttt.tcl:192 msgid "Subdiv" msgstr "" #: tcl/ngcgui_ttt.tcl:199 #, fuzzy msgid "default" msgstr "Benutzen der Standartwerte" #: tcl/ngcgui_ttt.tcl:239 #, fuzzy msgid "Mode" msgstr "Modus" #: tcl/ngcgui_ttt.tcl:247 #, fuzzy msgid "normal" msgstr "Normal" #: tcl/ngcgui_ttt.tcl:248 msgid "date" msgstr "" #: tcl/ngcgui_ttt.tcl:249 msgid "fontname" msgstr "" #: tcl/ngcgui_ttt.tcl:262 #, fuzzy msgid "Switches" msgstr "inch" #: tcl/ngcgui_ttt.tcl:270 #, fuzzy msgid "Unicode" msgstr "Ende" #: tcl/ngcgui_ttt.tcl:275 msgid "Allow Rotation" msgstr "" #: tcl/ngcgui_ttt.tcl:295 msgid "Make ngcgui-compatible subfile and new tab page" msgstr "" #: tcl/ngcgui_ttt.tcl:353 msgid "Null text" msgstr "" #: tcl/ngcgui_ttt.tcl:384 msgid "Using truetype-tracer default font" msgstr "" #: tcl/ngcgui_ttt.tcl:388 #, fuzzy msgid "no such file" msgstr "(keine Datei)" #: tcl/ngcgui_ttt.tcl:393 #, fuzzy msgid "file not readable" msgstr "Datei ist nicht geöffnet" #: tcl/ngcgui_ttt.tcl:507 msgid "Creating new tab page" msgstr "" #: src/emc/usr_intf/tooledit.tcl:65 msgid "Problem reading ~/.tooleditrc" msgstr "Kann ~/.tooleditrc nicht lesen" #: src/emc/usr_intf/tooledit.tcl:82 #, tcl-format msgid "Note: Ignoring duplicate column name: %s" msgstr "Hinweis: Ignoriere doppelten Spaltenname: %s" #: src/emc/usr_intf/tooledit.tcl:93 #, tcl-format msgid "Unknown column: %s" msgstr "Unbekannte Spalte: %s" #: src/emc/usr_intf/tooledit.tcl:210 src/emc/usr_intf/tooledit.tcl:213 #: src/emc/usr_intf/tooledit.tcl:598 src/emc/usr_intf/tooledit.tcl:599 #: src/emc/usr_intf/tooledit.tcl:1032 msgid "NEW" msgstr "NEU" #: src/emc/usr_intf/tooledit.tcl:232 #, tcl-format msgid "%s must be a number" msgstr "%s muss eine Zahl sein" #: src/emc/usr_intf/tooledit.tcl:241 #, tcl-format msgid "filename: <%s> not readable" msgstr "Dateiname: <%s> nicht lesbar" #: src/emc/usr_intf/tooledit.tcl:245 #, tcl-format msgid "filename: <%s> not writable" msgstr "Dateiname: <%s> nicht schreibbar" #: src/emc/usr_intf/tooledit.tcl:250 #, tcl-format msgid "directory: <%s> not writable" msgstr "Verzeichnis: <%s> nicht schreibbar" #: src/emc/usr_intf/tooledit.tcl:294 #, tcl-format msgid "Skipping linenumber %d for tag %s, value <%s> is not a number" msgstr "Überspringe Zeile %d wg. Knoten %s, Wert <%s> is keine Zahl" #: src/emc/usr_intf/tooledit.tcl:300 #, tcl-format msgid "Skipping linenumber %d for tag %s, expected integer not <%s>" msgstr "Überspringe Zeile %d wg. Knoten %s, erwarte Integer, nicht <%s>" #: src/emc/usr_intf/tooledit.tcl:316 #, tcl-format msgid "At linenumber %d, Unknown tag <%s>" msgstr "Zeile %d: Unbekannter Knoten <%s>" #: src/emc/usr_intf/tooledit.tcl:399 #, tcl-format msgid "%s: Column sorting not available with tcl_version==%s" msgstr "%s: Spaltensortierung in tcl_version==%s nicht verfügbar" #: src/emc/usr_intf/tooledit.tcl:408 msgid "tool" msgstr "Wkz" #: src/emc/usr_intf/tooledit.tcl:409 msgid "poc" msgstr "Fach" #: src/emc/usr_intf/tooledit.tcl:410 msgid "diam" msgstr "Dmess" #: src/emc/usr_intf/tooledit.tcl:411 msgid "front" msgstr "vorne" #: src/emc/usr_intf/tooledit.tcl:412 msgid "back" msgstr "hinten" #: src/emc/usr_intf/tooledit.tcl:413 msgid "orien" msgstr "Ausr" #: src/emc/usr_intf/tooledit.tcl:414 msgid "comment" msgstr "Bemerkung" #: src/emc/usr_intf/tooledit.tcl:444 msgid "Del" msgstr "Lö " #: src/emc/usr_intf/tooledit.tcl:473 msgid "ReLoadTable" msgstr "Tabelle neu laden" #: src/emc/usr_intf/tooledit.tcl:478 msgid "SaveFile" msgstr "Datei speichern" #: src/emc/usr_intf/tooledit.tcl:483 msgid "ReRead" msgstr "Neu laden" #: src/emc/usr_intf/tooledit.tcl:485 msgid "AddTool" msgstr "Werkzeug anlegen" #: src/emc/usr_intf/tooledit.tcl:535 #, tcl-format msgid "Opened %s" msgstr "%s geöffnet" #: src/emc/usr_intf/tooledit.tcl:536 #, tcl-format msgid "Created %s" msgstr "%s erstellt" #: src/emc/usr_intf/tooledit.tcl:537 msgid "File updated" msgstr "Datei aktualisiert" #: src/emc/usr_intf/tooledit.tcl:538 msgid "File modified" msgstr "Datei geändert" #: src/emc/usr_intf/tooledit.tcl:539 msgid "File check errors" msgstr "Fehler bei Dateiprüfung" #: src/emc/usr_intf/tooledit.tcl:540 msgid "File checked" msgstr "Datei geprüft" #: src/emc/usr_intf/tooledit.tcl:541 msgid "File items deleted" msgstr "Dateieinträge gelöscht" #: src/emc/usr_intf/tooledit.tcl:542 msgid "Bogus lines in file ignored" msgstr "Fehlerhafte Zeilen in Datei ignoriert" #: src/emc/usr_intf/tooledit.tcl:543 msgid "File errors -- Check Entries" msgstr "Dateifehler -- bitte Datensätze prüfen" #: src/emc/usr_intf/tooledit.tcl:544 msgid "Warning: File changed by another process" msgstr "Warnung: Datei von fremden Prozess verändert" #: src/emc/usr_intf/tooledit.tcl:545 msgid "Warning: File deleted by another process" msgstr "Warnung: Datei von fremden Prozess gelöscht" #: src/emc/usr_intf/tooledit.tcl:546 msgid "Added Tool" msgstr "Werkzeug angelegt" #: src/emc/usr_intf/tooledit.tcl:550 #, tcl-format msgid "Sorted by %s, increasing" msgstr "Sortiert nach %s, aufsteigend" #: src/emc/usr_intf/tooledit.tcl:551 #, tcl-format msgid "Sorted by %s, decreasing" msgstr "Sortiert nach %s, absteigend" #: src/emc/usr_intf/tooledit.tcl:593 msgid "Added" msgstr "Angelegt" #: src/emc/usr_intf/tooledit.tcl:802 #, tcl-format msgid "Tool %s, Column %s, parameter %s is not a number" msgstr "Werkzeug %s, Spalte %s, Parameter %s ist keine Zahl" #: src/emc/usr_intf/tooledit.tcl:811 #, tcl-format msgid "Tool %s, parameter %s must be nonnegative integer" msgstr "Werkzeug %s, Parameter %s muss positive Integerzahl sein" #: src/emc/usr_intf/tooledit.tcl:819 #, tcl-format msgid "Tool %s: must be 0..9 integer" msgstr "Werkzeug %s: muss Integerzahl zwischen 0..9 sein" #: src/emc/usr_intf/tooledit.tcl:826 #, tcl-format msgid "Tool %s: <%s> must be between -360 and 360" msgstr "Werkzeug %s: <%s> muss zwischen -360 und 360 liegen" #: src/emc/usr_intf/tooledit.tcl:842 #, tcl-format msgid "Pocket <%s> specified multiple times" msgstr "Fach <%s> mehrmals angegeben" #: src/emc/usr_intf/tooledit.tcl:857 #, tcl-format msgid "Tool <%s> specified multiple times" msgstr "Werkzeug <%s> mehrmals angegeben" #: src/emc/usr_intf/tooledit.tcl:902 msgid "File Modified" msgstr "Datei geändert" #: src/emc/usr_intf/tooledit.tcl:903 msgid "Save Modifications to File?" msgstr "Änderungen in Datei speichern?" #: src/emc/usr_intf/tooledit.tcl:930 #, tcl-format msgid "" "Only these columns are currently used:\n" "\n" " %s" msgstr "" "Nur die folgenden Spalten werden aktuell benutzt:\n" "\n" " %s" #: src/emc/usr_intf/tooledit.tcl:931 msgid "Limit display to these columns by specifying" msgstr "Anzeige auf diese Spalten beschränken durch" #: src/emc/usr_intf/tooledit.tcl:933 msgid "Format for ini file is" msgstr "Das Format für die INI-Datei ist" #: src/emc/usr_intf/tooledit.tcl:935 msgid "For standalone use, invoke as" msgstr "Zum eingenständigen Gebrauch starten mit" #: src/emc/usr_intf/tooledit.tcl:936 msgid "tool_table_filename" msgstr "WkzTabelle_Dateiname" #: src/emc/usr_intf/tooledit.tcl:956 #, tcl-format msgid "Created by %s" msgstr "Erstellt von %s" #: src/emc/usr_intf/tooledit.tcl:957 msgid "Saved geometry (updated on program termination)" msgstr "Gespeicherte Geometrie (aktualisiert bei Programmende)" #: src/emc/usr_intf/tooledit.tcl:980 #, tcl-format msgid "" "%s: Axis inifile specifies multiple inifile items for: [EMCIO]TOOL_TABLE" msgstr "%s: Axis INI-Datei enthält mehrere Einträge für: [EMCIO]TOOL_TABLE" #: src/emc/usr_intf/tooledit.tcl:981 #, tcl-format msgid "%s: Using: %s" msgstr "%s: Benutzt: %s" #: src/emc/usr_intf/tooledit.tcl:990 #, tcl-format msgid "" "%s: Warning: Axis is running but the tool table file <%s> \n" "differs from the standalone startup file <%s>" msgstr "" "%s: Warnung: Axis läuft aber die Werkzeug-Datei <%s> \n" "unterscheidet sich vom der eigenständigen Datei <%s>" #: src/emc/usr_intf/tooledit.tcl:1004 msgid "Must be On and Idle to reload tool table" msgstr "Muss eingeschaltet und im Leerlauf sein, um Werkzeugtabelle zu laden" #: src/emc/usr_intf/tooledit.tcl:1093 msgid "Usage" msgstr "Gebrauch" #: src/emc/usr_intf/tooledit.tcl:1094 src/emc/usr_intf/tooledit.tcl:1095 msgid "filename" msgstr "Dateiname" #: src/emc/usr_intf/tooledit.tcl:1096 #, tcl-format msgid "Allowed column_ names are: %s" msgstr "Erlaubte Spaltennamen sind: %s" #: src/emc/usr_intf/tooledit.tcl:1106 msgid "Missing filename" msgstr "Fehlender Dateiname" #: src/emc/usr_intf/axis/scripts/axis.py:144 #: src/emc/usr_intf/axis/scripts/axis.py:148 #: emc/usr_intf/axis/scripts/axis.py:147 msgid "Emergency stop" msgstr "Notaus" #: src/emc/usr_intf/axis/scripts/axis.py:145 #: src/emc/usr_intf/axis/scripts/axis.py:149 #: emc/usr_intf/axis/scripts/axis.py:148 msgid "Turn machine on" msgstr "Maschine an" #: src/emc/usr_intf/axis/scripts/axis.py:147 #: src/emc/usr_intf/axis/scripts/axis.py:151 #: emc/usr_intf/axis/scripts/axis.py:150 msgid "Activate first axis" msgstr "Erste Achse aktivieren" #: src/emc/usr_intf/axis/scripts/axis.py:148 #: src/emc/usr_intf/axis/scripts/axis.py:152 #: emc/usr_intf/axis/scripts/axis.py:151 msgid "Activate second axis" msgstr "Zweite Achse aktivieren" #: src/emc/usr_intf/axis/scripts/axis.py:149 #: src/emc/usr_intf/axis/scripts/axis.py:153 #: emc/usr_intf/axis/scripts/axis.py:152 msgid "Activate third axis" msgstr "Dritte Achse aktivieren" #: src/emc/usr_intf/axis/scripts/axis.py:150 #: src/emc/usr_intf/axis/scripts/axis.py:154 #: emc/usr_intf/axis/scripts/axis.py:153 msgid "Activate fourth axis" msgstr "Vierte Achse aktivieren" #: src/emc/usr_intf/axis/scripts/axis.py:151 #: src/emc/usr_intf/axis/scripts/axis.py:155 #: emc/usr_intf/axis/scripts/axis.py:154 msgid "Activate fifth through ninth axis" msgstr "Fünfte bis neunte Achse aktivieren" #: src/emc/usr_intf/axis/scripts/axis.py:152 #: src/emc/usr_intf/axis/scripts/axis.py:156 #: emc/usr_intf/axis/scripts/axis.py:155 msgid "Set Feed Override from 0% to 100%" msgstr "Vorschubübersteuerung von 0% bis 100%" #: src/emc/usr_intf/axis/scripts/axis.py:153 #: src/emc/usr_intf/axis/scripts/axis.py:157 #: emc/usr_intf/axis/scripts/axis.py:156 msgid ", and ." msgstr ", und ." #: src/emc/usr_intf/axis/scripts/axis.py:153 #: src/emc/usr_intf/axis/scripts/axis.py:157 #: emc/usr_intf/axis/scripts/axis.py:156 msgid "Select jog speed" msgstr "Schrittgeschwindigkeit auswählen" #: src/emc/usr_intf/axis/scripts/axis.py:154 #: src/emc/usr_intf/axis/scripts/axis.py:158 #: emc/usr_intf/axis/scripts/axis.py:157 msgid "< and >" msgstr "< und >" #: src/emc/usr_intf/axis/scripts/axis.py:154 #: src/emc/usr_intf/axis/scripts/axis.py:158 #: emc/usr_intf/axis/scripts/axis.py:157 msgid "Select angular jog speed" msgstr "Winkelgeschwindigkeit auswählen" #: src/emc/usr_intf/axis/scripts/axis.py:155 #: src/emc/usr_intf/axis/scripts/axis.py:159 #: emc/usr_intf/axis/scripts/axis.py:158 msgid "I, Shift-I" msgstr "I, Umsch.-I" #: src/emc/usr_intf/axis/scripts/axis.py:155 share/axis/tcl/axis.tcl:2356 #: src/emc/usr_intf/axis/scripts/axis.py:159 #: emc/usr_intf/axis/scripts/axis.py:158 ../share/axis/tcl/axis.tcl:2305 msgid "Select jog increment" msgstr "Schrittweite auswählen" #: src/emc/usr_intf/axis/scripts/axis.py:156 #: src/emc/usr_intf/axis/scripts/axis.py:160 #: emc/usr_intf/axis/scripts/axis.py:159 msgid "Continuous jog" msgstr "Durchgehende Bewegung" #: src/emc/usr_intf/axis/scripts/axis.py:157 #: src/emc/usr_intf/pncconf/pncconf.py:479 #: src/emc/usr_intf/axis/scripts/axis.py:161 #: emc/usr_intf/axis/scripts/axis.py:160 #: emc/usr_intf/pncconf/pncconf.glade:20289 #: emc/usr_intf/pncconf/pncconf.glade:21312 #: emc/usr_intf/pncconf/pncconf.glade:22012 #: emc/usr_intf/pncconf/pncconf.glade:22712 msgid "Home" msgstr "Pos1" #: src/emc/usr_intf/axis/scripts/axis.py:157 #: src/emc/usr_intf/axis/scripts/axis.py:161 #: emc/usr_intf/axis/scripts/axis.py:160 msgid "Send active axis home" msgstr "Referenzfahrt mit der aktiven Achse" #: src/emc/usr_intf/axis/scripts/axis.py:158 #: src/emc/usr_intf/axis/scripts/axis.py:162 #: emc/usr_intf/axis/scripts/axis.py:161 msgid "Ctrl-Home" msgstr "Strg-Pos1" #: src/emc/usr_intf/axis/scripts/axis.py:158 #: src/emc/usr_intf/axis/scripts/axis.py:162 #: emc/usr_intf/axis/scripts/axis.py:161 msgid "Home all axes" msgstr "Referenzfahrt mit allen Achsen" #: src/emc/usr_intf/axis/scripts/axis.py:159 #: src/emc/usr_intf/axis/scripts/axis.py:163 #: emc/usr_intf/axis/scripts/axis.py:162 msgid "Shift-Home" msgstr "Umsch.-Pos1" #: src/emc/usr_intf/axis/scripts/axis.py:159 #: src/emc/usr_intf/axis/scripts/axis.py:163 #: emc/usr_intf/axis/scripts/axis.py:162 msgid "Zero G54 offset for active axis" msgstr "Nullpunktverschiebung für die aktive Achse löschen" #: src/emc/usr_intf/axis/scripts/axis.py:160 #: src/emc/usr_intf/axis/scripts/axis.py:164 #: emc/usr_intf/axis/scripts/axis.py:163 msgid "End" msgstr "Ende" #: src/emc/usr_intf/axis/scripts/axis.py:160 #: src/emc/usr_intf/axis/scripts/axis.py:164 #: emc/usr_intf/axis/scripts/axis.py:163 msgid "Set G54 offset for active axis" msgstr "Absolute Nullpunktverschiebung für die aktive Achse setzen" #: src/emc/usr_intf/axis/scripts/axis.py:161 #: src/emc/usr_intf/axis/scripts/axis.py:165 #: emc/usr_intf/axis/scripts/axis.py:164 msgid "Jog active axis" msgstr "Aktive Achse verfahren" #: src/emc/usr_intf/axis/scripts/axis.py:164 #: src/emc/usr_intf/axis/scripts/axis.py:168 #: emc/usr_intf/axis/scripts/axis.py:167 msgid "Left, Right" msgstr "Links, Rechts" #: src/emc/usr_intf/axis/scripts/axis.py:164 #: src/emc/usr_intf/axis/scripts/axis.py:168 #: emc/usr_intf/axis/scripts/axis.py:167 msgid "Jog first axis" msgstr "Erste Achse verfahren" #: src/emc/usr_intf/axis/scripts/axis.py:165 #: src/emc/usr_intf/axis/scripts/axis.py:169 #: emc/usr_intf/axis/scripts/axis.py:168 msgid "Up, Down" msgstr "Hoch, Runter" #: src/emc/usr_intf/axis/scripts/axis.py:165 #: src/emc/usr_intf/axis/scripts/axis.py:169 #: emc/usr_intf/axis/scripts/axis.py:168 msgid "Jog second axis" msgstr "Zweite Achse verfahren" #: src/emc/usr_intf/axis/scripts/axis.py:166 #: src/emc/usr_intf/axis/scripts/axis.py:170 #: emc/usr_intf/axis/scripts/axis.py:169 msgid "Pg Up, Pg Dn" msgstr "Bild auf, Bild ab" #: src/emc/usr_intf/axis/scripts/axis.py:166 #: src/emc/usr_intf/axis/scripts/axis.py:170 #: emc/usr_intf/axis/scripts/axis.py:169 msgid "Jog third axis" msgstr "Dritte Achse verfahren" #: src/emc/usr_intf/axis/scripts/axis.py:167 #: src/emc/usr_intf/axis/scripts/axis.py:171 #: emc/usr_intf/axis/scripts/axis.py:170 msgid "Shift+above jogs" msgstr "" #: src/emc/usr_intf/axis/scripts/axis.py:167 #: src/emc/usr_intf/axis/scripts/axis.py:171 #: emc/usr_intf/axis/scripts/axis.py:170 msgid "Jog at traverse speed" msgstr "" #: src/emc/usr_intf/axis/scripts/axis.py:168 #: src/emc/usr_intf/axis/scripts/axis.py:172 #: emc/usr_intf/axis/scripts/axis.py:171 msgid "Jog fourth axis" msgstr "Vierte Achse verfahren" #: src/emc/usr_intf/axis/scripts/axis.py:171 #: src/emc/usr_intf/axis/scripts/axis.py:175 #: emc/usr_intf/axis/scripts/axis.py:174 msgid "Toggle between Drag and Rotate mode" msgstr "Zwischen verschieben und drehen umschalten" #: src/emc/usr_intf/axis/scripts/axis.py:172 #: src/emc/usr_intf/axis/scripts/axis.py:176 #: emc/usr_intf/axis/scripts/axis.py:175 msgid "Left Button" msgstr "Linke Maustaste" #: src/emc/usr_intf/axis/scripts/axis.py:172 #: src/emc/usr_intf/axis/scripts/axis.py:176 #: emc/usr_intf/axis/scripts/axis.py:175 msgid "Pan, rotate or select line" msgstr "Verschieben, drehen oder Linie auswählen" #: src/emc/usr_intf/axis/scripts/axis.py:173 #: src/emc/usr_intf/axis/scripts/axis.py:177 #: emc/usr_intf/axis/scripts/axis.py:176 msgid "Shift+Left Button" msgstr "Umsch.+Linke Maustaste" #: src/emc/usr_intf/axis/scripts/axis.py:173 #: src/emc/usr_intf/axis/scripts/axis.py:177 #: emc/usr_intf/axis/scripts/axis.py:176 msgid "Rotate or pan" msgstr "Drehen oder verschieben" #: src/emc/usr_intf/axis/scripts/axis.py:174 #: src/emc/usr_intf/axis/scripts/axis.py:178 #: emc/usr_intf/axis/scripts/axis.py:177 msgid "Right Button" msgstr "Rechte Mausaste" #: src/emc/usr_intf/axis/scripts/axis.py:174 #: src/emc/usr_intf/axis/scripts/axis.py:176 #: src/emc/usr_intf/axis/scripts/axis.py:177 #: src/emc/usr_intf/axis/scripts/axis.py:178 #: src/emc/usr_intf/axis/scripts/axis.py:180 #: src/emc/usr_intf/axis/scripts/axis.py:181 #: emc/usr_intf/axis/scripts/axis.py:177 emc/usr_intf/axis/scripts/axis.py:179 #: emc/usr_intf/axis/scripts/axis.py:180 msgid "Zoom view" msgstr "Maßstab der Vorschau ändern" #: src/emc/usr_intf/axis/scripts/axis.py:175 #: src/emc/usr_intf/axis/scripts/axis.py:179 #: emc/usr_intf/axis/scripts/axis.py:178 msgid "Wheel Button" msgstr "Mausrad-Taste" #: src/emc/usr_intf/axis/scripts/axis.py:175 #: src/emc/usr_intf/axis/scripts/axis.py:179 #: emc/usr_intf/axis/scripts/axis.py:178 msgid "Rotate view" msgstr "Vorschau drehen" #: src/emc/usr_intf/axis/scripts/axis.py:176 #: src/emc/usr_intf/axis/scripts/axis.py:180 #: emc/usr_intf/axis/scripts/axis.py:179 msgid "Rotate Wheel" msgstr "Mausrad" #: src/emc/usr_intf/axis/scripts/axis.py:177 #: src/emc/usr_intf/axis/scripts/axis.py:181 #: emc/usr_intf/axis/scripts/axis.py:180 msgid "Control+Left Button" msgstr "Strg+Linke Maustaste" #: src/emc/usr_intf/axis/scripts/axis.py:180 #: src/emc/usr_intf/axis/scripts/axis.py:184 #: emc/usr_intf/axis/scripts/axis.py:183 msgid "Manual control" msgstr "Manuelle Kontrolle" #: src/emc/usr_intf/axis/scripts/axis.py:181 #: src/emc/usr_intf/axis/scripts/axis.py:185 #: emc/usr_intf/axis/scripts/axis.py:184 msgid "Code entry (MDI)" msgstr "Befehlseingabe (MDI)" #: src/emc/usr_intf/axis/scripts/axis.py:182 #: src/emc/usr_intf/axis/scripts/axis.py:186 #: emc/usr_intf/axis/scripts/axis.py:185 msgid "Control-M" msgstr "Strg-M" #: src/emc/usr_intf/axis/scripts/axis.py:182 #: src/emc/usr_intf/axis/scripts/axis.py:186 #: emc/usr_intf/axis/scripts/axis.py:185 msgid "Clear MDI history" msgstr "MDI-Verlauf leeren" #: src/emc/usr_intf/axis/scripts/axis.py:183 #: src/emc/usr_intf/axis/scripts/axis.py:187 #: emc/usr_intf/axis/scripts/axis.py:186 msgid "Control-H" msgstr "Strg-H" #: src/emc/usr_intf/axis/scripts/axis.py:183 #: src/emc/usr_intf/axis/scripts/axis.py:187 #: emc/usr_intf/axis/scripts/axis.py:186 msgid "Copy selected MDI history elements" msgstr "Markierte Befehle aus MDI-Verlauf" #: src/emc/usr_intf/axis/scripts/axis.py:184 #: src/emc/usr_intf/axis/scripts/axis.py:188 #: emc/usr_intf/axis/scripts/axis.py:187 msgid "to clipboard" msgstr "in die Zwischenablage kopieren" #: src/emc/usr_intf/axis/scripts/axis.py:185 #: src/emc/usr_intf/axis/scripts/axis.py:189 #: emc/usr_intf/axis/scripts/axis.py:188 msgid "Control-Shift-H" msgstr "Strg-Umsch.-H" #: src/emc/usr_intf/axis/scripts/axis.py:185 #: src/emc/usr_intf/axis/scripts/axis.py:189 #: emc/usr_intf/axis/scripts/axis.py:188 msgid "Paste clipboard to MDI history" msgstr "Zwischenablage in den MDI-Verlauf einfügen" #: src/emc/usr_intf/axis/scripts/axis.py:186 share/axis/tcl/axis.tcl:1113 #: src/emc/usr_intf/touchy/touchy.glade:508 #: src/emc/usr_intf/axis/scripts/axis.py:190 #: emc/usr_intf/axis/scripts/axis.py:189 ../share/axis/tcl/axis.tcl:1070 msgid "Override Limits" msgstr "Grenzwerte aufheben" #: src/emc/usr_intf/axis/scripts/axis.py:188 #: src/emc/usr_intf/axis/scripts/axis.py:192 #: emc/usr_intf/axis/scripts/axis.py:191 msgid "Open program" msgstr "Programm öffnen" #: src/emc/usr_intf/axis/scripts/axis.py:189 #: src/emc/usr_intf/axis/scripts/axis.py:193 #: emc/usr_intf/axis/scripts/axis.py:192 msgid "Control-R" msgstr "Strg-R" #: src/emc/usr_intf/axis/scripts/axis.py:189 #: src/emc/usr_intf/axis/scripts/axis.py:193 #: emc/usr_intf/axis/scripts/axis.py:192 msgid "Reload program" msgstr "Programm neu laden" #: src/emc/usr_intf/axis/scripts/axis.py:190 #: src/emc/usr_intf/axis/scripts/axis.py:194 #: emc/usr_intf/axis/scripts/axis.py:193 msgid "Control-S" msgstr "Strg-S" #: src/emc/usr_intf/axis/scripts/axis.py:190 #: src/emc/usr_intf/axis/scripts/axis.py:194 #: emc/usr_intf/axis/scripts/axis.py:193 msgid "Save g-code as" msgstr "G-Code in Datei speichern" #: src/emc/usr_intf/axis/scripts/axis.py:191 #: src/emc/usr_intf/axis/scripts/axis.py:195 #: emc/usr_intf/axis/scripts/axis.py:194 msgid "Run program" msgstr "Programm ausführen" #: src/emc/usr_intf/axis/scripts/axis.py:192 #: src/emc/usr_intf/axis/scripts/axis.py:196 #: emc/usr_intf/axis/scripts/axis.py:195 msgid "Step program" msgstr "Programm schrittweise ausführen" #: src/emc/usr_intf/axis/scripts/axis.py:193 #: src/emc/usr_intf/axis/scripts/axis.py:197 #: emc/usr_intf/axis/scripts/axis.py:196 msgid "Pause program" msgstr "Programm unterbrechen" #: src/emc/usr_intf/axis/scripts/axis.py:194 #: src/emc/usr_intf/axis/scripts/axis.py:198 #: emc/usr_intf/axis/scripts/axis.py:197 msgid "Resume program" msgstr "Programm fortsetzen" #: src/emc/usr_intf/axis/scripts/axis.py:195 #: src/emc/usr_intf/axis/scripts/axis.py:199 #: emc/usr_intf/axis/scripts/axis.py:198 msgid "Stop running program, or" msgstr "Programmausführung oder Laden der" #: src/emc/usr_intf/axis/scripts/axis.py:196 #: src/emc/usr_intf/axis/scripts/axis.py:200 #: emc/usr_intf/axis/scripts/axis.py:199 msgid "stop loading program preview" msgstr "Programm-Vorschau abbrechen" #: src/emc/usr_intf/axis/scripts/axis.py:198 #: src/emc/usr_intf/axis/scripts/axis.py:202 #: emc/usr_intf/axis/scripts/axis.py:201 msgid "Toggle mist" msgstr "Kühlnebel an/aus" #: src/emc/usr_intf/axis/scripts/axis.py:199 #: src/emc/usr_intf/axis/scripts/axis.py:203 #: emc/usr_intf/axis/scripts/axis.py:202 msgid "Toggle flood" msgstr "Kühlmittel an/aus" #: src/emc/usr_intf/axis/scripts/axis.py:200 #: src/emc/usr_intf/axis/scripts/axis.py:204 #: emc/usr_intf/axis/scripts/axis.py:203 msgid "Spindle brake off" msgstr "Spindelbremse aus" #: src/emc/usr_intf/axis/scripts/axis.py:201 #: src/emc/usr_intf/axis/scripts/axis.py:205 #: emc/usr_intf/axis/scripts/axis.py:204 msgid "Shift-B" msgstr "Umsch.-B" #: src/emc/usr_intf/axis/scripts/axis.py:201 #: src/emc/usr_intf/axis/scripts/axis.py:205 #: emc/usr_intf/axis/scripts/axis.py:204 msgid "Spindle brake on" msgstr "Spindelbremse an" #: src/emc/usr_intf/axis/scripts/axis.py:202 #: src/emc/usr_intf/axis/scripts/axis.py:206 #: emc/usr_intf/axis/scripts/axis.py:205 msgid "Turn spindle clockwise" msgstr "Spindel dreht im Uhrzeigersinn" #: src/emc/usr_intf/axis/scripts/axis.py:203 #: src/emc/usr_intf/axis/scripts/axis.py:207 #: emc/usr_intf/axis/scripts/axis.py:206 msgid "Turn spindle counterclockwise" msgstr "Spindel dreht gegen Uhrzeigersinn" #: src/emc/usr_intf/axis/scripts/axis.py:204 #: src/emc/usr_intf/axis/scripts/axis.py:208 #: emc/usr_intf/axis/scripts/axis.py:207 msgid "Turn spindle more slowly" msgstr "Spindel langsamer" #: src/emc/usr_intf/axis/scripts/axis.py:205 #: src/emc/usr_intf/axis/scripts/axis.py:209 #: emc/usr_intf/axis/scripts/axis.py:208 msgid "Turn spindle more quickly" msgstr "Spindel schneller" #: src/emc/usr_intf/axis/scripts/axis.py:207 #: src/emc/usr_intf/axis/scripts/axis.py:211 #: emc/usr_intf/axis/scripts/axis.py:210 msgid "Control-K" msgstr "Strg-K" #: src/emc/usr_intf/axis/scripts/axis.py:207 #: src/emc/usr_intf/axis/scripts/axis.py:211 #: emc/usr_intf/axis/scripts/axis.py:210 msgid "Clear live plot" msgstr "Werkzeugpfad löschen" #: src/emc/usr_intf/axis/scripts/axis.py:208 #: src/emc/usr_intf/axis/scripts/axis.py:212 #: emc/usr_intf/axis/scripts/axis.py:211 msgid "Cycle among preset views" msgstr "Perspektive wechseln" #: src/emc/usr_intf/axis/scripts/axis.py:209 #: src/emc/usr_intf/axis/scripts/axis.py:213 #, fuzzy msgid "Cycle among preview, DRO, and user tabs" msgstr "Perspektive wechseln" #: src/emc/usr_intf/axis/scripts/axis.py:211 #: src/emc/usr_intf/axis/scripts/axis.py:215 #: emc/usr_intf/axis/scripts/axis.py:214 msgid "Ctrl-Space" msgstr "Strg-Leertaste" #: src/emc/usr_intf/axis/scripts/axis.py:211 #: src/emc/usr_intf/axis/scripts/axis.py:215 #: emc/usr_intf/axis/scripts/axis.py:214 msgid "Clear notifications" msgstr "Mitteilungen löschen" #: src/emc/usr_intf/axis/scripts/axis.py:828 #: src/emc/usr_intf/axis/scripts/axis.py:836 #: emc/usr_intf/axis/scripts/axis.py:1639 #, python-format msgid "Unknown tool %d" msgstr "Unbekanntes Werkzeug %d" #: src/emc/usr_intf/axis/scripts/axis.py:830 #: src/emc/usr_intf/axis/scripts/axis.py:838 #: emc/usr_intf/axis/scripts/axis.py:1637 msgid "No tool" msgstr "Kein Werkzeug" #: src/emc/usr_intf/axis/scripts/axis.py:832 #: src/emc/usr_intf/axis/scripts/axis.py:840 #: emc/usr_intf/axis/scripts/axis.py:1641 #, python-format msgid "Tool %(tool)d, offset %(zo)g, diameter %(dia)g" msgstr "Werkzeug %(tool)d, Werkzeugverschiebung %(zo)g, Durchmesser %(dia)g" #: src/emc/usr_intf/axis/scripts/axis.py:834 #: src/emc/usr_intf/axis/scripts/axis.py:842 #: emc/usr_intf/axis/scripts/axis.py:1643 #, python-format msgid "Tool %(tool)d, zo %(zo)g, xo %(xo)g, dia %(dia)g" msgstr "Werkzeug %(tool)d, Zo %(zo)g, Xo %(xo)g, Durchmesser %(dia)g" #: src/emc/usr_intf/axis/scripts/axis.py:1005 #: src/emc/usr_intf/axis/scripts/axis.py:1013 #: emc/usr_intf/axis/scripts/axis.py:1895 msgid "Filtering..." msgstr "Arbeite..." #: src/emc/usr_intf/axis/scripts/axis.py:1065 #: src/emc/usr_intf/axis/scripts/axis.py:1073 #: emc/usr_intf/axis/scripts/axis.py:1951 msgid "Filter failed" msgstr "Konvertierung fehlgeschlagen" #: src/emc/usr_intf/axis/scripts/axis.py:1066 #: src/emc/usr_intf/axis/scripts/axis.py:1074 #: emc/usr_intf/axis/scripts/axis.py:1952 #, python-format msgid "" "The program %(program)r exited with code %(code)d. Any error messages it " "produced are shown below:" msgstr "" "Der Konverter %(program)r hat den Vorgang mit Status %(code)d beendet. " "Folgende Fehlermeldungen sind vorhanden:" #: src/emc/usr_intf/axis/scripts/axis.py:1127 #: src/emc/usr_intf/axis/scripts/axis.py:1139 #: emc/usr_intf/axis/scripts/axis.py:2011 #, python-format msgid "G-Code error in %s" msgstr "G-Code Fehler in %s" #: src/emc/usr_intf/axis/scripts/axis.py:1128 #: src/emc/usr_intf/axis/scripts/axis.py:1140 #: emc/usr_intf/axis/scripts/axis.py:2012 #, python-format msgid "" "Near line %(seq)d of %(f)s:\n" "%(error_str)s" msgstr "" "Nahe Zeile %(seq)d in %(f)s:\n" "%(error_str)s" #: src/emc/usr_intf/axis/scripts/axis.py:1279 #: src/emc/usr_intf/axis/scripts/axis.py:2712 share/axis/tcl/axis.tcl:1092 #: share/axis/tcl/axis.tcl:1094 share/axis/tcl/axis.tcl:2144 #: src/emc/usr_intf/axis/scripts/axis.py:1292 #: src/emc/usr_intf/axis/scripts/axis.py:2725 #: emc/usr_intf/axis/scripts/axis.py:2168 #: emc/usr_intf/axis/scripts/axis.py:3558 ../share/axis/tcl/axis.tcl:1049 #: ../share/axis/tcl/axis.tcl:1051 ../share/axis/tcl/axis.tcl:2097 msgid "Continuous" msgstr "Durchgehend" #: src/emc/usr_intf/axis/scripts/axis.py:1390 #: src/emc/usr_intf/axis/scripts/axis.py:1403 msgid "Ok" msgstr "" #: src/emc/usr_intf/axis/scripts/axis.py:1533 #: src/emc/usr_intf/axis/scripts/axis.py:1546 #: emc/usr_intf/axis/scripts/axis.py:2365 msgid "T Tool Table" msgstr "T Werkzeugtabelle" #: src/emc/usr_intf/axis/scripts/axis.py:1544 #: src/emc/usr_intf/axis/scripts/axis.py:1717 #: src/emc/usr_intf/stepconf/stepconf.py:1691 #: src/emc/usr_intf/stepconf/stepconf.py:2235 #: src/emc/usr_intf/axis/scripts/axis.py:1557 #: src/emc/usr_intf/axis/scripts/axis.py:1730 #: emc/usr_intf/axis/scripts/axis.py:2382 #: emc/usr_intf/axis/scripts/axis.py:2532 #: emc/usr_intf/stepconf/stepconf.py:1501 #: emc/usr_intf/stepconf/stepconf.py:2093 msgid "in" msgstr "in" #: src/emc/usr_intf/axis/scripts/axis.py:1547 #: src/emc/usr_intf/axis/scripts/axis.py:1560 #: emc/usr_intf/axis/scripts/axis.py:2385 #, fuzzy msgid " radius" msgstr "Kreis mit Radius Null" #: src/emc/usr_intf/axis/scripts/axis.py:1549 #: src/emc/usr_intf/axis/scripts/axis.py:1562 #: emc/usr_intf/axis/scripts/axis.py:2387 #, fuzzy msgid " diameter" msgstr "Durchmesser:" #: src/emc/usr_intf/axis/scripts/axis.py:1550 #: src/emc/usr_intf/axis/scripts/axis.py:1563 #: emc/usr_intf/axis/scripts/axis.py:2388 msgid "°" msgstr "" #: src/emc/usr_intf/axis/scripts/axis.py:1559 #: src/emc/usr_intf/axis/scripts/axis.py:1572 #: emc/usr_intf/axis/scripts/axis.py:2394 msgid "Coordinate System:" msgstr "Koordinatensystem:" #: src/emc/usr_intf/axis/scripts/axis.py:1575 #: src/emc/usr_intf/axis/scripts/axis.py:1588 msgid "fixture" msgstr "" #: src/emc/usr_intf/axis/scripts/axis.py:1576 #: src/emc/usr_intf/axis/scripts/axis.py:1589 msgid "workpiece" msgstr "" #: src/emc/usr_intf/axis/scripts/axis.py:1592 #: src/emc/usr_intf/axis/scripts/axis.py:1605 #: emc/usr_intf/axis/scripts/axis.py:2417 msgid "Name:" msgstr "Name:" #: src/emc/usr_intf/axis/scripts/axis.py:1592 #: src/emc/usr_intf/axis/scripts/axis.py:1605 #: emc/usr_intf/axis/scripts/axis.py:2417 msgid "Size:" msgstr "Größe:" #: src/emc/usr_intf/axis/scripts/axis.py:1593 #: src/emc/usr_intf/axis/scripts/axis.py:1606 #: emc/usr_intf/axis/scripts/axis.py:2418 msgid "Tool order:" msgstr "Werkzeugreichenfolge:" #: src/emc/usr_intf/axis/scripts/axis.py:1593 #: src/emc/usr_intf/axis/scripts/axis.py:1606 #: emc/usr_intf/axis/scripts/axis.py:2418 msgid "Rapid distance:" msgstr "Eilgang-Weg:" #: src/emc/usr_intf/axis/scripts/axis.py:1594 #: src/emc/usr_intf/axis/scripts/axis.py:1607 #: emc/usr_intf/axis/scripts/axis.py:2419 msgid "Feed distance:" msgstr "Vorschub-Weg:" #: src/emc/usr_intf/axis/scripts/axis.py:1594 #: src/emc/usr_intf/axis/scripts/axis.py:1607 #: emc/usr_intf/axis/scripts/axis.py:2419 msgid "Total distance:" msgstr "Gesamter Weg:" #: src/emc/usr_intf/axis/scripts/axis.py:1595 #: src/emc/usr_intf/axis/scripts/axis.py:1608 #: emc/usr_intf/axis/scripts/axis.py:2420 msgid "Run time:" msgstr "Laufzeit:" #: src/emc/usr_intf/axis/scripts/axis.py:1595 #: src/emc/usr_intf/axis/scripts/axis.py:1608 #: emc/usr_intf/axis/scripts/axis.py:2420 msgid "X bounds:" msgstr "X-Bereich:" #: src/emc/usr_intf/axis/scripts/axis.py:1596 #: src/emc/usr_intf/axis/scripts/axis.py:1609 #: emc/usr_intf/axis/scripts/axis.py:2421 msgid "Y bounds:" msgstr "Y-Bereich:" #: src/emc/usr_intf/axis/scripts/axis.py:1596 #: src/emc/usr_intf/axis/scripts/axis.py:1609 #: emc/usr_intf/axis/scripts/axis.py:2421 msgid "Z bounds:" msgstr "Z-Bereich:" #: src/emc/usr_intf/axis/scripts/axis.py:1597 #: src/emc/usr_intf/axis/scripts/axis.py:1610 #: emc/usr_intf/axis/scripts/axis.py:2422 msgid "A bounds:" msgstr "A-Bereich:" #: src/emc/usr_intf/axis/scripts/axis.py:1597 #: src/emc/usr_intf/axis/scripts/axis.py:1610 #: emc/usr_intf/axis/scripts/axis.py:2422 msgid "B bounds:" msgstr "B-Bereich:" #: src/emc/usr_intf/axis/scripts/axis.py:1598 #: src/emc/usr_intf/axis/scripts/axis.py:1611 #: emc/usr_intf/axis/scripts/axis.py:2423 msgid "C bounds:" msgstr "C-Bereich:" #: src/emc/usr_intf/axis/scripts/axis.py:1622 #: src/emc/usr_intf/axis/scripts/axis.py:1635 #: emc/usr_intf/axis/scripts/axis.py:2447 #, python-format msgid "Program exceeds machine minimum on axis %s" msgstr "Programm überschreitet den unteren Grenzwert der Achse %s" #: src/emc/usr_intf/axis/scripts/axis.py:1625 #: src/emc/usr_intf/axis/scripts/axis.py:1638 #: emc/usr_intf/axis/scripts/axis.py:2450 #, python-format msgid "Program exceeds machine maximum on axis %s" msgstr "Programm überschreitet den oberen Grenzwert der Achse %s" #: src/emc/usr_intf/axis/scripts/axis.py:1630 #: src/emc/usr_intf/axis/scripts/axis.py:1643 #: emc/usr_intf/axis/scripts/axis.py:2455 msgid "Program exceeds machine limits" msgstr "Programm überschreitet die Maschinengrenzwerte" #: src/emc/usr_intf/axis/scripts/axis.py:1633 #: src/emc/usr_intf/axis/scripts/axis.py:1646 #: emc/usr_intf/axis/scripts/axis.py:2458 msgid "Run Anyway" msgstr "Trotzdem ausführen" #: src/emc/usr_intf/axis/scripts/axis.py:1695 #: src/emc/usr_intf/axis/scripts/axis.py:1708 #: emc/usr_intf/axis/scripts/axis.py:2510 msgid "No file loaded" msgstr "Es ist keine Datei geladen" #: src/emc/usr_intf/axis/scripts/axis.py:1703 #: src/emc/usr_intf/axis/scripts/axis.py:1716 #: emc/usr_intf/axis/scripts/axis.py:2518 #, python-format msgid "generated from %s" msgstr "Erstellt von »%«" #: src/emc/usr_intf/axis/scripts/axis.py:1709 #: src/emc/usr_intf/axis/scripts/axis.py:1722 #: emc/usr_intf/axis/scripts/axis.py:2524 #, python-format msgid "" "%(size)s bytes\n" "%(lines)s gcode lines" msgstr "" "%(size)s Byte\n" "%(lines)s Zeilen" #: src/emc/usr_intf/axis/scripts/axis.py:1735 #: src/emc/usr_intf/axis/scripts/axis.py:1748 #: emc/usr_intf/axis/scripts/axis.py:2550 #, python-format msgid "%.1f minutes" msgstr "%.1f min" #: src/emc/usr_intf/axis/scripts/axis.py:1737 #: src/emc/usr_intf/axis/scripts/axis.py:1750 #: emc/usr_intf/axis/scripts/axis.py:2552 #, python-format msgid "%d seconds" msgstr "%d s" #: src/emc/usr_intf/axis/scripts/axis.py:1745 #: src/emc/usr_intf/axis/scripts/axis.py:1758 #: emc/usr_intf/axis/scripts/axis.py:2560 #, python-format msgid "%(a)f to %(b)f = %(diff)f %(units)s" msgstr "%(a)f bis %(b)f = %(diff)f %(units)s" #: src/emc/usr_intf/axis/scripts/axis.py:1746 #: src/emc/usr_intf/axis/scripts/axis.py:1759 #: emc/usr_intf/axis/scripts/axis.py:2561 msgid "G-Code Properties" msgstr "G-Code Eigenschaften" #: src/emc/usr_intf/axis/scripts/axis.py:1870 #: src/emc/usr_intf/axis/scripts/axis.py:1883 #: emc/usr_intf/axis/scripts/axis.py:2759 msgid "All machinable files" msgstr "Alle einlesbaren Dateien" #: src/emc/usr_intf/axis/scripts/axis.py:1871 #: src/emc/usr_intf/axis/scripts/axis.py:2451 #: src/emc/usr_intf/axis/scripts/axis.py:1884 #: src/emc/usr_intf/axis/scripts/axis.py:2464 #: emc/usr_intf/axis/scripts/axis.py:2760 #: emc/usr_intf/axis/scripts/axis.py:3319 msgid "rs274ngc files" msgstr "NC Dateien" #: src/emc/usr_intf/axis/scripts/axis.py:1886 #: src/emc/usr_intf/axis/scripts/axis.py:1899 msgid "axis cannot accept remote command while running" msgstr "" #: src/emc/usr_intf/axis/scripts/axis.py:2242 #: src/emc/usr_intf/axis/scripts/axis.py:2255 msgid "Axis is already homed, are you sure you want to re-home?" msgstr "" #: src/emc/usr_intf/axis/scripts/axis.py:2255 #: src/emc/usr_intf/axis/scripts/axis.py:2268 msgid "This axis is already homed, are you sure you want to re-home?" msgstr "" #: src/emc/usr_intf/axis/scripts/axis.py:2295 share/axis/tcl/axis.tcl:1108 #: src/emc/usr_intf/axis/scripts/axis.py:2308 #: emc/usr_intf/axis/scripts/axis.py:3143 ../share/axis/tcl/axis.tcl:1065 msgid "Touch Off" msgstr "Antasten" #: src/emc/usr_intf/axis/scripts/axis.py:2296 #: src/emc/usr_intf/axis/scripts/axis.py:2309 #, fuzzy, python-format msgid "Enter %s coordinate relative to %%s:" msgstr "%s-Koordinate relativ zum Werkstück" #: src/emc/usr_intf/axis/scripts/axis.py:2463 #: src/emc/usr_intf/axis/scripts/axis.py:2476 #: emc/usr_intf/axis/scripts/axis.py:3331 msgid "Error saving file" msgstr "Fehler beim speichern der Datei" #: src/emc/usr_intf/axis/scripts/axis.py:2845 #: src/emc/usr_intf/touchy/touchy.glade:577 #: src/emc/usr_intf/axis/scripts/axis.py:2859 #: emc/usr_intf/axis/scripts/axis.py:3693 msgid "Home All" msgstr "Referenzfahrt" #: src/emc/usr_intf/axis/scripts/axis.py:2847 #: src/emc/usr_intf/axis/scripts/axis.py:2861 #: emc/usr_intf/axis/scripts/axis.py:3695 msgid "Home all axes [Ctrl-Home]" msgstr "Referenzfahrt mit allen Achsen [Strg-Pos1]" #: src/emc/usr_intf/axis/scripts/axis.py:2850 #: src/emc/usr_intf/axis/scripts/axis.py:2864 #: emc/usr_intf/axis/scripts/axis.py:3698 msgid "Home All Axes" msgstr "Referenzfahrt mit allen Achsen" #: src/emc/usr_intf/axis/scripts/axis.py:2855 #: src/emc/usr_intf/axis/scripts/axis.py:2871 #: emc/usr_intf/axis/scripts/axis.py:3703 msgid "Unhome All Axes" msgstr "Referenzfahrt aufheben bei allen Achsen" #: src/emc/usr_intf/axis/scripts/axis.py:2879 #: src/emc/usr_intf/axis/scripts/axis.py:2895 #: emc/usr_intf/axis/scripts/axis.py:3723 #, python-format msgid "Home Axis _%s" msgstr "Referenzfahrt mit _%s-Achse" #: src/emc/usr_intf/axis/scripts/axis.py:2881 #: src/emc/usr_intf/axis/scripts/axis.py:2897 #: emc/usr_intf/axis/scripts/axis.py:3725 #, python-format msgid "Unhome Axis _%s" msgstr "Referenzfahrt aufheben bei _%s-Achse" #: src/emc/usr_intf/axis/scripts/axis.py:3024 #: src/emc/usr_intf/axis/scripts/axis.py:3040 #: emc/usr_intf/axis/scripts/axis.py:3862 msgid "Run from here" msgstr "Ab hier ausführen" #: src/emc/usr_intf/axis/scripts/axis.py:3319 #: src/emc/usr_intf/axis/scripts/axis.py:3335 #: emc/usr_intf/axis/scripts/axis.py:4079 msgid "Error in ~/.axisrc" msgstr "Fehler in »~/.axisrc«" #: src/emc/usr_intf/axis/scripts/linuxcnctop.py:102 msgid "LinuxCNC Status" msgstr "" #: src/emc/usr_intf/axis/scripts/linuxcnctop.py:118 #, fuzzy msgid "Copy All" msgstr "Kopieren" #: src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py:29 #: emc/usr_intf/axis/scripts/hal_manualtoolchange.py:11 #, python-format msgid "Insert tool %d and click continue when ready" msgstr "Bitte Werkzeug %d einlegen und mit »Fortsetzen« bestätigen." #: src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py:31 #: emc/usr_intf/axis/scripts/hal_manualtoolchange.py:13 msgid "Remove the tool and click continue when ready" msgstr "Bitte Werkzeug entfernen und mit »Fortsetzen« bestätigen." #: src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py:37 #: src/emc/usr_intf/touchy/mdi.py:49 #: emc/usr_intf/axis/scripts/hal_manualtoolchange.py:17 msgid "Tool change" msgstr "Werkzeugwechsel" #: src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py:37 #: emc/usr_intf/axis/scripts/hal_manualtoolchange.py:17 msgid "Continue" msgstr "Fortsetzen" #: src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py:55 #: emc/usr_intf/axis/scripts/hal_manualtoolchange.py:31 msgid "AXIS Manual Toolchanger" msgstr "AXIS Werkzeugwechsel" #: src/emc/usr_intf/axis/scripts/hal_manualtoolchange.py:59 #: emc/usr_intf/axis/scripts/hal_manualtoolchange.py:35 msgid "" "This window is part of the AXIS manual toolchanger. It is safe to close or " "iconify this window, or it will close automatically after a few seconds." msgstr "" "Dieses Fenster ist ein Teil für den manuellen Werkzeugwechsel. Es kann ohne " "Bedenken geschlossen werden. Andernfalls schließt es sich nach einigen " "Sekunden selbst." #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:507 #: emc/usr_intf/axis/scripts/image-to-gcode.py:498 #, python-format msgid "%s: Image to gcode" msgstr "%s: Bild in G-Code umwandeln" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:508 #: emc/usr_intf/axis/scripts/image-to-gcode.py:499 msgid "Image to gcode" msgstr "Bild in G-Code umwandeln" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:518 #: emc/usr_intf/axis/scripts/image-to-gcode.py:509 #, python-format msgid "" "Image size: %(w)d x %(h)d pixels\n" "Minimum pixel value: %(min)d\n" "Maximum pixel value: %(max)d" msgstr "" "Bild-Größe: %(w)d x %(h)d Pixel\n" "Minimale Helligkeit: %(min)d\n" "Maximale Helligkeit: %(max)d" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:608 #: emc/usr_intf/axis/scripts/image-to-gcode.py:599 msgid "G20 (in)" msgstr "G20 (in)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:608 #: emc/usr_intf/axis/scripts/image-to-gcode.py:599 msgid "G21 (mm)" msgstr "G21 (mm)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:611 #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:624 #: src/emc/usr_intf/touchy/emc_interface.py:417 #: emc/usr_intf/axis/scripts/image-to-gcode.py:602 #: emc/usr_intf/axis/scripts/image-to-gcode.py:615 #: emc/usr_intf/pncconf/pncconf.glade:816 #: emc/usr_intf/pncconf/pncconf.glade:883 msgid "None" msgstr "Keine" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:611 #: emc/usr_intf/axis/scripts/image-to-gcode.py:602 msgid "White" msgstr "Weiss" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:611 #: emc/usr_intf/axis/scripts/image-to-gcode.py:602 msgid "Black" msgstr "Schwarz" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:617 #: emc/usr_intf/axis/scripts/image-to-gcode.py:608 msgid "Rows" msgstr "Zeilen" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:617 #: emc/usr_intf/axis/scripts/image-to-gcode.py:608 msgid "Columns" msgstr "Spalten" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:617 #: emc/usr_intf/axis/scripts/image-to-gcode.py:608 msgid "Rows then Columns" msgstr "Erst Zeilen, dann Spalten" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:617 #: emc/usr_intf/axis/scripts/image-to-gcode.py:608 msgid "Columns then Rows" msgstr "Erst Spalten, dann Zeilen" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:618 #: emc/usr_intf/axis/scripts/image-to-gcode.py:609 msgid "Positive" msgstr "Positiv" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:618 #: emc/usr_intf/axis/scripts/image-to-gcode.py:609 msgid "Negative" msgstr "Negativ" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:618 #: emc/usr_intf/axis/scripts/image-to-gcode.py:609 msgid "Alternating" msgstr "Abwechselnd" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:618 #: emc/usr_intf/axis/scripts/image-to-gcode.py:609 msgid "Up Milling" msgstr "Aufwärts fräsen" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:618 #: emc/usr_intf/axis/scripts/image-to-gcode.py:609 msgid "Down Milling" msgstr "Abwärts fräsen" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:623 #: emc/usr_intf/axis/scripts/image-to-gcode.py:614 msgid "Ball End" msgstr "Kugelfräser" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:623 #: emc/usr_intf/axis/scripts/image-to-gcode.py:614 msgid "Flat End" msgstr "Schaftfräser" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:623 #: emc/usr_intf/axis/scripts/image-to-gcode.py:614 msgid "30 Degree" msgstr "30°-Fräser" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:623 #: emc/usr_intf/axis/scripts/image-to-gcode.py:614 msgid "45 Degree" msgstr "45°-Fräser" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:623 #: emc/usr_intf/axis/scripts/image-to-gcode.py:614 msgid "60 Degree" msgstr "60°-Fräser" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:624 #: emc/usr_intf/axis/scripts/image-to-gcode.py:615 msgid "Secondary" msgstr "Sekundär" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:624 #: emc/usr_intf/axis/scripts/image-to-gcode.py:615 msgid "Full" msgstr "Voll" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:654 #: emc/usr_intf/axis/scripts/image-to-gcode.py:645 msgid "Invert Image" msgstr "Bild invertieren" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:655 #: emc/usr_intf/axis/scripts/image-to-gcode.py:646 msgid "Normalize Image" msgstr "Bild normalisieren" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:656 #: emc/usr_intf/axis/scripts/image-to-gcode.py:647 msgid "Extend Image Border" msgstr "Bildränder erweitern" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:657 #: emc/usr_intf/axis/scripts/image-to-gcode.py:648 msgid "Pixel Size (Units)" msgstr "Pixel-Größe (Einheiten)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:658 #: emc/usr_intf/axis/scripts/image-to-gcode.py:649 msgid "Depth (units)" msgstr "Tiefe (Einheiten)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:659 #: emc/usr_intf/axis/scripts/image-to-gcode.py:650 msgid "Tolerance (units)" msgstr "Toleranz (Einheiten)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:660 #: emc/usr_intf/axis/scripts/image-to-gcode.py:651 msgid "Stepover (pixels)" msgstr "Auflösung (Pixel)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:661 #: emc/usr_intf/axis/scripts/image-to-gcode.py:652 msgid "Tool Diameter (units)" msgstr "Werkzeugdurchmesser (Einheiten)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:662 #: emc/usr_intf/axis/scripts/image-to-gcode.py:653 msgid "Tool Type" msgstr "Werkzeugtyp" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:663 #: emc/usr_intf/axis/scripts/image-to-gcode.py:654 msgid "Feed Rate (units per minute)" msgstr "Vorschub (Einheiten pro Minute)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:664 #: emc/usr_intf/axis/scripts/image-to-gcode.py:655 msgid "Plunge Feed Rate (units per minute)" msgstr "Eintauchvorschub (Einheiten pro Minute)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:666 #: emc/usr_intf/axis/scripts/image-to-gcode.py:657 msgid "Safety Height (units)" msgstr "Sicherheitshöhe (Einheiten)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:667 #: emc/usr_intf/axis/scripts/image-to-gcode.py:658 msgid "Scan Pattern" msgstr "Abtastmuster" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:668 #: emc/usr_intf/axis/scripts/image-to-gcode.py:659 msgid "Scan Direction" msgstr "Abtastrichtung" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:669 #: emc/usr_intf/axis/scripts/image-to-gcode.py:660 msgid "Lace Bounding" msgstr "Glättung" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:670 #: emc/usr_intf/axis/scripts/image-to-gcode.py:661 msgid "Contact Angle (degrees)" msgstr "Kontaktwinkel (Grad)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:671 #: emc/usr_intf/axis/scripts/image-to-gcode.py:662 msgid "Spindle Speed (RPM)" msgstr "Spindeldrehzahl (1/min)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:672 #: emc/usr_intf/axis/scripts/image-to-gcode.py:663 msgid "Roughing offset (units, 0=no roughing)" msgstr "Schruppoffset (Einheiten, 0=kein Schruppen)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:673 #: emc/usr_intf/axis/scripts/image-to-gcode.py:664 msgid "Roughing depth per pass (units)" msgstr "Schrupptiefe pro Durchlauf (Einheiten)" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:740 #: emc/usr_intf/axis/scripts/image-to-gcode.py:731 msgid "image-to-gcode: User pressed cancel" msgstr "Bild zu G-Code: Benutzer betätigte »Abbrechen«" #: src/emc/usr_intf/axis/scripts/image-to-gcode.py:753 #: emc/usr_intf/axis/scripts/image-to-gcode.py:744 msgid "Depth images" msgstr "Bilddateien" #: src/emc/usr_intf/axis/scripts/debuglevel.py:22 #, fuzzy msgid "LinuxCNC Debug Level" msgstr "Debug-Stufe" #: src/emc/usr_intf/axis/scripts/debuglevel.py:23 #: emc/usr_intf/axis/scripts/debuglevel.py:23 msgid "debuglevel" msgstr "Debug-Level" #: src/emc/usr_intf/axis/scripts/debuglevel.py:36 #: emc/usr_intf/axis/scripts/debuglevel.py:36 msgid "Configuration *" msgstr "Konfiguration *" #: src/emc/usr_intf/axis/scripts/debuglevel.py:37 #: emc/usr_intf/axis/scripts/debuglevel.py:37 msgid "Version Numbers *" msgstr "Versions-Nummer *" #: src/emc/usr_intf/axis/scripts/debuglevel.py:38 #: emc/usr_intf/axis/scripts/debuglevel.py:38 msgid "NML *" msgstr "NML *" #: src/emc/usr_intf/axis/scripts/debuglevel.py:39 #: emc/usr_intf/axis/scripts/debuglevel.py:39 msgid "RCS *" msgstr "RCS *" #: src/emc/usr_intf/axis/scripts/debuglevel.py:40 #: emc/usr_intf/axis/scripts/debuglevel.py:40 msgid "Task Issue" msgstr "" #: src/emc/usr_intf/axis/scripts/debuglevel.py:41 #: emc/usr_intf/axis/scripts/debuglevel.py:41 msgid "Motion Time" msgstr "" #: src/emc/usr_intf/axis/scripts/debuglevel.py:43 #: emc/usr_intf/axis/scripts/debuglevel.py:43 msgid "Interpreter List" msgstr "" #: src/emc/usr_intf/axis/scripts/debuglevel.py:47 #: emc/usr_intf/axis/scripts/debuglevel.py:47 #, python-format msgid "" "Inifile setting for this debug level:\n" "[EMC]DEBUG=0x%08x" msgstr "" "Einstellungen in der INI-Datei für diesen Debug-Level:\n" "[EMC]DEBUG=0x%08x" #: src/emc/usr_intf/axis/scripts/debuglevel.py:81 #: emc/usr_intf/axis/scripts/debuglevel.py:81 msgid " * This option can only be enabled in the inifile" msgstr " * Diese Option kann nur in der INI-Datei aktiviert werden" #: share/axis/tcl/axis.tcl:49 ../share/axis/tcl/axis.tcl:47 msgid "_Open..." msgstr "Ö_ffnen..." #: share/axis/tcl/axis.tcl:53 ../share/axis/tcl/axis.tcl:51 msgid "Recent _Files" msgstr "Zuletzt geöffnete Dateien" #: share/axis/tcl/axis.tcl:57 ../share/axis/tcl/axis.tcl:55 msgid "_Edit..." msgstr "Be_arbeiten..." #: share/axis/tcl/axis.tcl:60 ../share/axis/tcl/axis.tcl:58 msgid "Ctrl-R" msgstr "Strg-R" #: share/axis/tcl/axis.tcl:62 ../share/axis/tcl/axis.tcl:60 msgid "_Reload" msgstr "_Neu laden" #: share/axis/tcl/axis.tcl:65 ../share/axis/tcl/axis.tcl:63 msgid "Ctrl-S" msgstr "Strg-S" #: share/axis/tcl/axis.tcl:67 ../share/axis/tcl/axis.tcl:65 msgid "_Save gcode as..." msgstr "_Speichern unter..." #: share/axis/tcl/axis.tcl:71 ../share/axis/tcl/axis.tcl:69 msgid "_Properties..." msgstr "_Eigenschaften..." #: share/axis/tcl/axis.tcl:77 ../share/axis/tcl/axis.tcl:75 msgid "Edit _tool table..." msgstr "_Werkzeugtabelle bearbeiten" #: share/axis/tcl/axis.tcl:81 ../share/axis/tcl/axis.tcl:79 msgid "Reload tool ta_ble" msgstr "We_rkzeugtabelle neu laden" #: share/axis/tcl/axis.tcl:87 ../share/axis/tcl/axis.tcl:85 msgid "_Ladder Editor..." msgstr "S_PS-Editor" #: share/axis/tcl/axis.tcl:99 ../share/axis/tcl/axis.tcl:97 msgid "Toggle _Emergency Stop" msgstr "_Notaus an/aus" #: share/axis/tcl/axis.tcl:104 ../share/axis/tcl/axis.tcl:102 msgid "Toggle _Machine Power" msgstr "_Maschine an/aus" #: share/axis/tcl/axis.tcl:111 ../share/axis/tcl/axis.tcl:109 msgid "_Run program" msgstr "P_rogramm ausführen" #: share/axis/tcl/axis.tcl:115 ../share/axis/tcl/axis.tcl:113 msgid "Ru_n from selected line" msgstr "Ab gewählter _Zeile ausführen" #: share/axis/tcl/axis.tcl:120 ../share/axis/tcl/axis.tcl:118 msgid "S_tep" msgstr "Einzelschri_tt" #: share/axis/tcl/axis.tcl:125 ../share/axis/tcl/axis.tcl:123 msgid "_Pause" msgstr "_Pause" #: share/axis/tcl/axis.tcl:130 ../share/axis/tcl/axis.tcl:128 msgid "Re_sume" msgstr "Fort_setzen" #: share/axis/tcl/axis.tcl:140 ../share/axis/tcl/axis.tcl:138 msgid "Stop at M_1" msgstr "Bei »M_1« anhalten" #: share/axis/tcl/axis.tcl:145 ../share/axis/tcl/axis.tcl:143 msgid "Skip lines with '_/'" msgstr "Zeilen mit »_/« überspringen" #: share/axis/tcl/axis.tcl:150 ../share/axis/tcl/axis.tcl:148 msgid "Ctrl-M" msgstr "Strg-M" #: share/axis/tcl/axis.tcl:152 ../share/axis/tcl/axis.tcl:150 msgid "Clear MDI h_istory" msgstr "MD_I-Verlauf leeren" #: share/axis/tcl/axis.tcl:154 ../share/axis/tcl/axis.tcl:152 msgid "Ctrl-H" msgstr "Strg-H" #: share/axis/tcl/axis.tcl:156 ../share/axis/tcl/axis.tcl:154 msgid "Copy from MDI hist_ory" msgstr "Aus MDI-Verlauf k_opieren" #: share/axis/tcl/axis.tcl:158 ../share/axis/tcl/axis.tcl:156 msgid "Ctrl-Shift-H" msgstr "Strg-Umsch.-H" #: share/axis/tcl/axis.tcl:160 ../share/axis/tcl/axis.tcl:158 msgid "Paste to MDI histor_y" msgstr "In MDI-Verlauf _einfügen" #: share/axis/tcl/axis.tcl:166 ../share/axis/tcl/axis.tcl:164 msgid "_Calibration" msgstr "_Kalibrierung..." #: share/axis/tcl/axis.tcl:170 ../share/axis/tcl/axis.tcl:168 msgid "Show _Hal Configuration" msgstr "_HAL anzeigen..." #: share/axis/tcl/axis.tcl:174 ../share/axis/tcl/axis.tcl:172 msgid "H_al Meter" msgstr "H_AL-Meter..." #: share/axis/tcl/axis.tcl:178 ../share/axis/tcl/axis.tcl:176 msgid "Ha_l Scope" msgstr "HA_L-Scope..." #: share/axis/tcl/axis.tcl:182 #, fuzzy msgid "Sho_w LinuxCNC Status" msgstr "EM_C-Status..." #: share/axis/tcl/axis.tcl:186 ../share/axis/tcl/axis.tcl:184 msgid "Set _Debug Level" msgstr "Deb_ug-Stufe festlegen..." #: share/axis/tcl/axis.tcl:192 ../share/axis/tcl/axis.tcl:190 msgid "Homin_g" msgstr "Re_ferenzfahrt" #: share/axis/tcl/axis.tcl:196 ../share/axis/tcl/axis.tcl:194 msgid "_Unhoming" msgstr "Referenzfahrt aufhe_ben" #: share/axis/tcl/axis.tcl:200 ../share/axis/tcl/axis.tcl:198 msgid "_Zero coordinate system" msgstr "Koordinatens_ystem" #: share/axis/tcl/axis.tcl:204 ../share/axis/tcl/axis.tcl:202 msgid "P1 G5_4" msgstr "P1 G5_4" #: share/axis/tcl/axis.tcl:208 ../share/axis/tcl/axis.tcl:206 msgid "P2 G5_5" msgstr "P2 G5_5" #: share/axis/tcl/axis.tcl:212 ../share/axis/tcl/axis.tcl:210 msgid "P3 G5_6" msgstr "P3 G5_6" #: share/axis/tcl/axis.tcl:216 ../share/axis/tcl/axis.tcl:214 msgid "P4 G5_7" msgstr "P4 G5_7" #: share/axis/tcl/axis.tcl:220 ../share/axis/tcl/axis.tcl:218 msgid "P5 G5_8" msgstr "P5 G5_8" #: share/axis/tcl/axis.tcl:224 ../share/axis/tcl/axis.tcl:222 msgid "P6 G5_9" msgstr "P6 G5_9" #: share/axis/tcl/axis.tcl:228 ../share/axis/tcl/axis.tcl:226 msgid "P7 G59._1" msgstr "P7 G59._1" #: share/axis/tcl/axis.tcl:232 ../share/axis/tcl/axis.tcl:230 msgid "P8 G59._2" msgstr "P8 G59._2" #: share/axis/tcl/axis.tcl:236 ../share/axis/tcl/axis.tcl:234 msgid "P9 G59._3" msgstr "P9 G59._3" #: share/axis/tcl/axis.tcl:240 ../share/axis/tcl/axis.tcl:238 msgid "_G92" msgstr "_G92" #: share/axis/tcl/axis.tcl:248 msgid "Tool touch off to wor_kpiece" msgstr "" #: share/axis/tcl/axis.tcl:254 msgid "Tool touch off to _fixture" msgstr "" #: share/axis/tcl/axis.tcl:262 ../share/axis/tcl/axis.tcl:248 msgid "_Top view" msgstr "_Draufsicht" #: share/axis/tcl/axis.tcl:269 ../share/axis/tcl/axis.tcl:255 msgid "_Rotated Top view" msgstr "Draufsicht _gedreht" #: share/axis/tcl/axis.tcl:276 ../share/axis/tcl/axis.tcl:262 msgid "_Side view" msgstr "_Seitenansicht" #: share/axis/tcl/axis.tcl:283 ../share/axis/tcl/axis.tcl:269 msgid "_Front view" msgstr "_Vorderansicht" #: share/axis/tcl/axis.tcl:290 ../share/axis/tcl/axis.tcl:276 msgid "_Perspective view" msgstr "_Perspektivisch" #: share/axis/tcl/axis.tcl:299 ../share/axis/tcl/axis.tcl:285 msgid "Display _Inches" msgstr "_Inch" #: share/axis/tcl/axis.tcl:306 ../share/axis/tcl/axis.tcl:292 msgid "Display _MM" msgstr "_mm" #: share/axis/tcl/axis.tcl:313 ../share/axis/tcl/axis.tcl:299 msgid "S_how program" msgstr "V_orschau anzeigen" #: share/axis/tcl/axis.tcl:318 ../share/axis/tcl/axis.tcl:304 msgid "Show program r_apids" msgstr "_Eilgangpfad anzeigen" #: share/axis/tcl/axis.tcl:323 #, fuzzy msgid "Alpha-_blend program" msgstr "Programm öffnen" #: share/axis/tcl/axis.tcl:328 ../share/axis/tcl/axis.tcl:309 msgid "Sho_w live plot" msgstr "Werkzeugp_fad anzeigen" #: share/axis/tcl/axis.tcl:333 ../share/axis/tcl/axis.tcl:314 msgid "Show too_l" msgstr "_Werkzeug anzeigen" #: share/axis/tcl/axis.tcl:338 ../share/axis/tcl/axis.tcl:319 msgid "Show e_xtents" msgstr "_Bemaßung anzeigen" #: share/axis/tcl/axis.tcl:343 #, fuzzy msgid "Show o_ffsets" msgstr "_Bemaßung anzeigen" #: share/axis/tcl/axis.tcl:348 ../share/axis/tcl/axis.tcl:324 msgid "Sh_ow machine limits" msgstr "Maschinengren_zen anzeigen" #: share/axis/tcl/axis.tcl:353 ../share/axis/tcl/axis.tcl:329 msgid "Show v_elocity" msgstr "Geschwi_ndigkeit anzeigen" #: share/axis/tcl/axis.tcl:358 ../share/axis/tcl/axis.tcl:334 msgid "Show _distance to go" msgstr "Verf_ahrweg anzeigen" #: share/axis/tcl/axis.tcl:363 ../share/axis/tcl/axis.tcl:339 #, fuzzy msgid "Large coordinate fo_nt" msgstr "Große S_chrift für Koordinaten" #: share/axis/tcl/axis.tcl:366 ../share/axis/tcl/axis.tcl:342 msgid "Ctrl-K" msgstr "Strg-K" #: share/axis/tcl/axis.tcl:368 ../share/axis/tcl/axis.tcl:344 msgid "_Clear live plot" msgstr "Werkzeugpfad _löschen" #: share/axis/tcl/axis.tcl:377 ../share/axis/tcl/axis.tcl:353 msgid "Show commanded position" msgstr "E_rwartete Position" #: share/axis/tcl/axis.tcl:384 ../share/axis/tcl/axis.tcl:360 msgid "Show actual position" msgstr "A_ktuelle Position" #: share/axis/tcl/axis.tcl:393 ../share/axis/tcl/axis.tcl:369 msgid "Show machine position" msgstr "Absol_ute Position" #: share/axis/tcl/axis.tcl:400 ../share/axis/tcl/axis.tcl:376 msgid "Show relative position" msgstr "Rela_tive Position" #: share/axis/tcl/axis.tcl:409 ../share/axis/tcl/axis.tcl:385 msgid "Joint mode" msgstr "Joint-Modus" #: share/axis/tcl/axis.tcl:416 ../share/axis/tcl/axis.tcl:392 msgid "World mode" msgstr "World-Modus" #: share/axis/tcl/axis.tcl:425 ../share/axis/tcl/axis.tcl:401 msgid "_About AXIS" msgstr "_Info..." #: share/axis/tcl/axis.tcl:429 ../share/axis/tcl/axis.tcl:405 msgid "Quick _Reference" msgstr "_Tastaturbelegung..." #: share/axis/tcl/axis.tcl:439 ../share/axis/tcl/axis.tcl:415 msgid "_Machine" msgstr "_Maschine" #: share/axis/tcl/axis.tcl:443 ../share/axis/tcl/axis.tcl:419 msgid "_View" msgstr "A_nsicht" #: share/axis/tcl/axis.tcl:456 ../share/axis/tcl/axis.tcl:432 msgid "Toggle Emergency Stop [F1]" msgstr "Notaus an/aus [F1]" #: share/axis/tcl/axis.tcl:465 ../share/axis/tcl/axis.tcl:441 msgid "Toggle Machine power [F2]" msgstr "Maschine an/aus [F2]" #: share/axis/tcl/axis.tcl:476 ../share/axis/tcl/axis.tcl:452 msgid "Open G-Code file [O]" msgstr "Datei öffnen [O]" #: share/axis/tcl/axis.tcl:484 ../share/axis/tcl/axis.tcl:460 msgid "Reopen current file [Control-R]" msgstr "Aktuelle Datei neu laden [Strg-R]" #: share/axis/tcl/axis.tcl:494 ../share/axis/tcl/axis.tcl:470 msgid "Begin executing current file [R]" msgstr "Aktuelle Datei ausführen [R]" #: share/axis/tcl/axis.tcl:502 ../share/axis/tcl/axis.tcl:478 msgid "Execute next line [T]" msgstr "Nächste Zeile ausführen [T]" #: share/axis/tcl/axis.tcl:510 ../share/axis/tcl/axis.tcl:486 msgid "Pause [P] / resume [S] execution" msgstr "Pause [P] / Fortsetzen [S]" #: share/axis/tcl/axis.tcl:518 ../share/axis/tcl/axis.tcl:494 msgid "Stop program execution [ESC]" msgstr "Programmausführung abbrechen [ESC]" #: share/axis/tcl/axis.tcl:528 ../share/axis/tcl/axis.tcl:504 msgid "Toggle skip lines with '/' [Alt-M /]" msgstr "Zeilen beginnend mit '/' überspringen [Alt-M /]" #: share/axis/tcl/axis.tcl:535 ../share/axis/tcl/axis.tcl:511 msgid "Toggle optional pause [Alt-M 1]" msgstr "Wahlweiser Halt ein/aus [Alt-M 1]" #: share/axis/tcl/axis.tcl:544 ../share/axis/tcl/axis.tcl:520 msgid "Zoom in" msgstr "Vergrößern" #: share/axis/tcl/axis.tcl:552 ../share/axis/tcl/axis.tcl:528 msgid "Zoom out" msgstr "Verkleinern" #: share/axis/tcl/axis.tcl:560 ../share/axis/tcl/axis.tcl:536 msgid "Top view" msgstr "Draufsicht" #: share/axis/tcl/axis.tcl:568 ../share/axis/tcl/axis.tcl:544 msgid "Rotated top view" msgstr "Draufsicht gedreht" #: share/axis/tcl/axis.tcl:576 ../share/axis/tcl/axis.tcl:552 msgid "Side view" msgstr "Seitenansicht" #: share/axis/tcl/axis.tcl:584 ../share/axis/tcl/axis.tcl:560 msgid "Front view" msgstr "Vorderansicht" #: share/axis/tcl/axis.tcl:592 ../share/axis/tcl/axis.tcl:568 msgid "Perspective view" msgstr "Perspektivische Ansicht" #: share/axis/tcl/axis.tcl:600 ../share/axis/tcl/axis.tcl:576 msgid "Toggle between Drag and Rotate Mode [D]" msgstr "Zwischen verschieben und drehen umschalten [D]" #: share/axis/tcl/axis.tcl:615 ../share/axis/tcl/axis.tcl:591 msgid "Clear live plot [Ctrl-K]" msgstr "Werkzeugpfad löschen [Strg-K]" #: share/axis/tcl/axis.tcl:766 ../share/axis/tcl/axis.tcl:723 msgid "Manual Control [F3]" msgstr "Manuelle Kontrolle [F3]" #: share/axis/tcl/axis.tcl:767 ../share/axis/tcl/axis.tcl:724 msgid "MDI [F5]" msgstr "MDI [F5]" #: share/axis/tcl/axis.tcl:781 share/axis/tcl/axis.tcl:2036 #: share/axis/tcl/axis.tcl:2203 ../share/axis/tcl/axis.tcl:738 #: ../share/axis/tcl/axis.tcl:1993 ../share/axis/tcl/axis.tcl:2156 msgid "Axis:" msgstr "Achse:" #: share/axis/tcl/axis.tcl:1102 ../share/axis/tcl/axis.tcl:1059 msgid "Home Axis" msgstr "Referenzfahrt" #: share/axis/tcl/axis.tcl:1176 ../share/axis/tcl/axis.tcl:1133 msgid "Spindle:" msgstr "Spindel:" #: share/axis/tcl/axis.tcl:1223 src/emc/usr_intf/touchy/touchy.glade:946 #: ../share/axis/tcl/axis.tcl:1180 msgid "-" msgstr "-" #: share/axis/tcl/axis.tcl:1237 ../share/axis/tcl/axis.tcl:1194 msgid "+" msgstr "+" #: share/axis/tcl/axis.tcl:1242 ../share/axis/tcl/axis.tcl:1199 msgid "Brake" msgstr "Bremse" #: share/axis/tcl/axis.tcl:1289 ../share/axis/tcl/axis.tcl:1246 msgid "Coolant:" msgstr "Kühlung:" #: share/axis/tcl/axis.tcl:1294 ../share/axis/tcl/axis.tcl:1251 msgid "Mist" msgstr "Kühlnebel" #: share/axis/tcl/axis.tcl:1299 ../share/axis/tcl/axis.tcl:1256 msgid "Flood" msgstr "Kühlmittel" #: share/axis/tcl/axis.tcl:1371 ../share/axis/tcl/axis.tcl:1328 msgid "History:" msgstr "Verlauf:" #: share/axis/tcl/axis.tcl:1394 ../share/axis/tcl/axis.tcl:1351 msgid "MDI Command:" msgstr "Befehl:" #: share/axis/tcl/axis.tcl:1403 ../share/axis/tcl/axis.tcl:1360 msgid "Go" msgstr "Ausführen" #: share/axis/tcl/axis.tcl:1409 ../share/axis/tcl/axis.tcl:1366 msgid "Active G-Codes:" msgstr "Aktive G-Codes:" #: share/axis/tcl/axis.tcl:1487 ../share/axis/tcl/axis.tcl:1444 msgid "Preview" msgstr "Vorschau" #: share/axis/tcl/axis.tcl:1488 ../share/axis/tcl/axis.tcl:1445 msgid "DRO" msgstr "DRO" #: share/axis/tcl/axis.tcl:1575 share/axis/tcl/axis.tcl:1588 #: ../share/axis/tcl/axis.tcl:1531 ../share/axis/tcl/axis.tcl:1544 msgid "Jog Speed:" msgstr "Schrittgeschwindigkeit:" #: share/axis/tcl/axis.tcl:1600 ../share/axis/tcl/axis.tcl:1556 msgid "Max Velocity:" msgstr "Maximale Geschwindigkeit:" #: share/axis/tcl/axis.tcl:1629 ../share/axis/tcl/axis.tcl:1585 msgid "Spindle Override:" msgstr "Spindelübersteuerung:" #: share/axis/tcl/axis.tcl:1631 share/axis/tcl/axis.tcl:1671 #: src/emc/usr_intf/pncconf/pncconf.glade:3141 #: src/emc/usr_intf/pncconf/pncconf.glade:3154 #: src/emc/usr_intf/pncconf/pncconf.glade:3167 #: src/emc/usr_intf/pncconf/pncconf.glade:3180 #: src/emc/usr_intf/pncconf/pncconf.glade:3193 #: src/emc/usr_intf/pncconf/pncconf.glade:3206 #: src/emc/usr_intf/pncconf/pncconf.glade:3219 #: src/emc/usr_intf/pncconf/pncconf.glade:3232 #: src/emc/usr_intf/pncconf/pncconf.glade:3345 #: src/emc/usr_intf/pncconf/pncconf.glade:3358 #: src/emc/usr_intf/pncconf/pncconf.glade:3371 #: src/emc/usr_intf/pncconf/pncconf.glade:3384 #: src/emc/usr_intf/pncconf/pncconf.glade:3397 #: src/emc/usr_intf/pncconf/pncconf.glade:3410 #: src/emc/usr_intf/pncconf/pncconf.glade:3516 #: src/emc/usr_intf/pncconf/pncconf.glade:3527 #: src/emc/usr_intf/pncconf/pncconf.glade:4022 #: src/emc/usr_intf/pncconf/pncconf.glade:4035 #: src/emc/usr_intf/pncconf/pncconf.glade:4048 #: src/emc/usr_intf/pncconf/pncconf.glade:4061 #: src/emc/usr_intf/pncconf/pncconf.glade:4074 #: src/emc/usr_intf/pncconf/pncconf.glade:4087 #: src/emc/usr_intf/pncconf/pncconf.glade:4100 #: src/emc/usr_intf/pncconf/pncconf.glade:4113 #: src/emc/usr_intf/pncconf/pncconf.glade:4226 #: src/emc/usr_intf/pncconf/pncconf.glade:4239 #: src/emc/usr_intf/pncconf/pncconf.glade:4252 #: src/emc/usr_intf/pncconf/pncconf.glade:4265 #: src/emc/usr_intf/pncconf/pncconf.glade:4278 #: src/emc/usr_intf/pncconf/pncconf.glade:4291 #: src/emc/usr_intf/pncconf/pncconf.glade:4397 #: src/emc/usr_intf/pncconf/pncconf.glade:4408 #: src/emc/usr_intf/pncconf/pncconf.glade:4903 #: src/emc/usr_intf/pncconf/pncconf.glade:4916 #: src/emc/usr_intf/pncconf/pncconf.glade:4929 #: src/emc/usr_intf/pncconf/pncconf.glade:4942 #: src/emc/usr_intf/pncconf/pncconf.glade:4955 #: src/emc/usr_intf/pncconf/pncconf.glade:4968 #: src/emc/usr_intf/pncconf/pncconf.glade:4981 #: src/emc/usr_intf/pncconf/pncconf.glade:4994 #: src/emc/usr_intf/pncconf/pncconf.glade:5107 #: src/emc/usr_intf/pncconf/pncconf.glade:5120 #: src/emc/usr_intf/pncconf/pncconf.glade:5133 #: src/emc/usr_intf/pncconf/pncconf.glade:5146 #: src/emc/usr_intf/pncconf/pncconf.glade:5159 #: src/emc/usr_intf/pncconf/pncconf.glade:5172 #: src/emc/usr_intf/pncconf/pncconf.glade:5278 #: src/emc/usr_intf/pncconf/pncconf.glade:5289 #: src/emc/usr_intf/pncconf/pncconf.glade:5582 #: src/emc/usr_intf/pncconf/pncconf.glade:5631 #: src/emc/usr_intf/pncconf/pncconf.glade:5641 ../share/axis/tcl/axis.tcl:1587 #: ../share/axis/tcl/axis.tcl:1627 msgid "%" msgstr "%" #: share/axis/tcl/axis.tcl:1711 #, fuzzy msgid "" "LinuxCNC/AXIS version $version\n" "\n" "Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 Jeff " "Epler and Chris Radek.\n" "\n" "This is free software, and you are welcome to redistribute it under certain " "conditions. See the file COPYING, included with LinuxCNC.\n" "\n" "Visit the LinuxCNC web site: " msgstr "" "LinuxCNC/AXIS Version $version\n" "\n" "Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 Jeff " "Epler und Chris Radek.\n" "\n" "Dieses Programm ist freie Software. Sie sind eingeladen, es unter bestimmten " "Bedingungen weiter zu verbreiten. Lesen Sie hierzu die Datei COPYING, die " "LinuxCNC beigelegt ist.\n" "\n" "Deutsche Übersetzung: Alex Joni, Florian Hahn, Ingrid Kirst\n" "\n" "Besuchen Sie die LinuxCNC-Webseite: " #: share/axis/tcl/axis.tcl:1739 ../share/axis/tcl/axis.tcl:1695 msgid "About AXIS" msgstr "Info über AXIS" #: share/axis/tcl/axis.tcl:1768 ../share/axis/tcl/axis.tcl:1724 msgid "AXIS Quick Reference" msgstr "AXIS Tastaturbelegung" #: share/axis/tcl/axis.tcl:1903 ../share/axis/tcl/axis.tcl:1860 msgid "AXIS $::version on $::machine" msgstr "AXIS $::version auf $::machine" #: share/axis/tcl/axis.tcl:1905 ../share/axis/tcl/axis.tcl:1862 msgid "(no file)" msgstr "(keine Datei)" #: share/axis/tcl/axis.tcl:1976 share/axis/tcl/axis.tcl:1981 #: ../share/axis/tcl/axis.tcl:1933 ../share/axis/tcl/axis.tcl:1938 msgid "Position:" msgstr "Position:" #: share/axis/tcl/axis.tcl:1978 ../share/axis/tcl/axis.tcl:1935 msgid "Machine" msgstr "absolut" #: share/axis/tcl/axis.tcl:1978 src/emc/usr_intf/touchy/touchy.glade:155 #: ../share/axis/tcl/axis.tcl:1935 msgid "Relative" msgstr "relativ" #: share/axis/tcl/axis.tcl:1979 src/emc/usr_intf/touchy/touchy.glade:3329 #: ../share/axis/tcl/axis.tcl:1936 msgid "Actual" msgstr "aktuell" #: share/axis/tcl/axis.tcl:1979 src/emc/usr_intf/touchy/touchy.glade:3318 #: ../share/axis/tcl/axis.tcl:1936 msgid "Commanded" msgstr "erwartet" #: share/axis/tcl/axis.tcl:2032 share/axis/tcl/axis.tcl:2203 #: ../share/axis/tcl/axis.tcl:1989 ../share/axis/tcl/axis.tcl:2156 msgid "Joint:" msgstr "Achse:" #: share/axis/tcl/axis.tcl:2338 ../share/axis/tcl/axis.tcl:2287 msgid "Turn spindle counterclockwise [F10]" msgstr "Spindel gegen Uhrzeigersinn [F10]" #: share/axis/tcl/axis.tcl:2339 ../share/axis/tcl/axis.tcl:2288 msgid "Turn spindle clockwise [F9]" msgstr "Spindel im Uhrzeigersinn [F9]" #: share/axis/tcl/axis.tcl:2340 ../share/axis/tcl/axis.tcl:2289 msgid "Stop spindle [F9/F10]" msgstr "Spindel anhalten [F9/F10]" #: share/axis/tcl/axis.tcl:2341 ../share/axis/tcl/axis.tcl:2290 msgid "Turn spindle Faster [F12]" msgstr "Spindel schneller [F12]" #: share/axis/tcl/axis.tcl:2342 ../share/axis/tcl/axis.tcl:2291 msgid "Turn spindle Slower [F11]" msgstr "Spindel langsamer [F12]" #: share/axis/tcl/axis.tcl:2343 ../share/axis/tcl/axis.tcl:2292 msgid "Turn spindle brake on [Shift-B] or off [B]" msgstr "Spindelbremse an [Umsch.-B] oder aus [B]" #: share/axis/tcl/axis.tcl:2344 ../share/axis/tcl/axis.tcl:2293 msgid "Turn flood on or off [F8]" msgstr "Kühlmittel an/aus [F8]" #: share/axis/tcl/axis.tcl:2345 ../share/axis/tcl/axis.tcl:2294 msgid "Turn mist on or off [F7]" msgstr "Kühlnebel an/aus [F7]" #: share/axis/tcl/axis.tcl:2346 ../share/axis/tcl/axis.tcl:2295 msgid "Send active axis home [Home]" msgstr "Referenzfahrt mit der aktiven Achse [Pos1]" #: share/axis/tcl/axis.tcl:2347 ../share/axis/tcl/axis.tcl:2296 msgid "Set G54 offset for active axis [End]" msgstr "Nullpunktverschiebung für die aktive Achse setzen [Ende]" #: share/axis/tcl/axis.tcl:2348 ../share/axis/tcl/axis.tcl:2297 msgid "Activate axis [X]" msgstr "Aktiviere Achse [X]" #: share/axis/tcl/axis.tcl:2349 ../share/axis/tcl/axis.tcl:2298 msgid "Activate axis [Y]" msgstr "Aktiviere Achse [Y]" #: share/axis/tcl/axis.tcl:2350 ../share/axis/tcl/axis.tcl:2299 msgid "Activate axis [Z]" msgstr "Aktiviere Achse [Z]" #: share/axis/tcl/axis.tcl:2351 ../share/axis/tcl/axis.tcl:2300 msgid "Activate axis [A]" msgstr "Aktiviere Achse [A]" #: share/axis/tcl/axis.tcl:2352 ../share/axis/tcl/axis.tcl:2301 msgid "Activate axis [4]" msgstr "Aktiviere Achse [4]" #: share/axis/tcl/axis.tcl:2353 ../share/axis/tcl/axis.tcl:2302 msgid "Activate axis [5]" msgstr "Aktiviere Achse [5]" #: share/axis/tcl/axis.tcl:2354 share/axis/tcl/axis.tcl:2355 #: ../share/axis/tcl/axis.tcl:2303 ../share/axis/tcl/axis.tcl:2304 msgid "Jog selected axis" msgstr "Aktive Achse verfahren" #: share/axis/tcl/axis.tcl:2357 ../share/axis/tcl/axis.tcl:2306 msgid "Temporarily allow jogging outside machine limits [L]" msgstr "Erlaubt über die Endschalter zu verfahren [L]" #: src/emc/usr_intf/touchy/mdi.py:47 src/emc/usr_intf/stepconf/stepconf.py:155 #: src/emc/usr_intf/pncconf/pncconf.py:440 #: emc/usr_intf/stepconf/stepconf.py:146 emc/usr_intf/pncconf/pncconf.py:237 msgid "Spindle CW" msgstr "Spindel rechts" #: src/emc/usr_intf/touchy/mdi.py:48 src/emc/usr_intf/stepconf/stepconf.py:155 #: src/emc/usr_intf/pncconf/pncconf.py:440 #: emc/usr_intf/stepconf/stepconf.py:146 emc/usr_intf/pncconf/pncconf.py:237 msgid "Spindle CCW" msgstr "Spindel links" #: src/emc/usr_intf/touchy/mdi.py:50 #, fuzzy msgid "Input control" msgstr "Manuelle Kontrolle" #: src/emc/usr_intf/touchy/mdi.py:53 src/emc/usr_intf/touchy/mdi.py:54 msgid "Straight rapid" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:55 src/emc/usr_intf/touchy/mdi.py:56 msgid "Straight feed" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:57 src/emc/usr_intf/touchy/mdi.py:58 msgid "Arc CW" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:59 src/emc/usr_intf/touchy/mdi.py:60 msgid "Arc CCW" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:61 src/emc/usr_intf/touchy/mdi.py:62 msgid "Dwell" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:63 #, fuzzy msgid "Setup" msgstr "Optionen ausbl." #: src/emc/usr_intf/touchy/mdi.py:64 #, fuzzy msgid "Spindle synchronized feed" msgstr "Spindel zurück" #: src/emc/usr_intf/touchy/mdi.py:65 msgid "Rigid tap" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:66 src/emc/usr_intf/touchy/mdi.py:67 #: src/emc/usr_intf/touchy/mdi.py:68 src/emc/usr_intf/touchy/mdi.py:69 #, fuzzy msgid "Probe" msgstr "Sensor" #: src/emc/usr_intf/touchy/mdi.py:70 msgid "Radius compensation left" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:71 msgid "Radius compensation right" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:72 msgid "Radius compensation left, immediate" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:73 msgid "Radius compensation right, immediate" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:74 #, fuzzy msgid "Tool length offset" msgstr "Werkzeug-Längen-Index zu groß" #: src/emc/usr_intf/touchy/mdi.py:75 #, fuzzy msgid "Tool length offset immediate" msgstr "Werkzeug-Längen-Index zu groß" #: src/emc/usr_intf/touchy/mdi.py:76 msgid "Motion in unoffset coordinates" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:77 #, fuzzy msgid "Continuous mode" msgstr "Durchgehende Bewegung" #: src/emc/usr_intf/touchy/mdi.py:79 msgid "Drill" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:80 msgid "Drill with dwell" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:81 msgid "Peck drill" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:82 msgid "Chip-break drill" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:83 msgid "Bore" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:84 msgid "Bore with dwell" msgstr "" #: src/emc/usr_intf/touchy/mdi.py:85 #, fuzzy msgid "Offset all coordinate systems" msgstr "Koordinatens_ystem" #: src/emc/usr_intf/touchy/mdi.py:86 #, fuzzy msgid "CSS Mode" msgstr "Modus" #: src/emc/usr_intf/touchy/emc_interface.py:410 msgid "CCW" msgstr "" #: src/emc/usr_intf/touchy/emc_interface.py:410 #, fuzzy msgid "Stopped" msgstr "Stopp" #: src/emc/usr_intf/touchy/emc_interface.py:410 msgid "CW" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:7 msgid "LinuxCNC/Touchy" msgstr "" #. # Touchy is Copyright (c) 2009 Chris Radek # # Touchy is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 2 of the License, or # (at your option) any later version. # # Touchy is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. #: src/emc/usr_intf/touchy/touchy.glade:11 msgid "window1" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:31 msgid "xa" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:44 msgid "xd" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:57 msgid "yr" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:68 msgid "ya" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:81 msgid "yd" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:94 msgid "zr" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:105 msgid "za" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:118 msgid "zd" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:131 msgid "DTG" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:143 #: src/emc/usr_intf/pncconf/pncconf.glade:59755 msgid "Absolute" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:165 msgid "xr" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:176 msgid "ar" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:188 msgid "br" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:200 msgid "cr" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:212 msgid "ur" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:224 msgid "vr" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:236 msgid "wr" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:248 msgid "aa" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:262 msgid "ba" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:276 msgid "ca" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:290 msgid "ua" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:304 msgid "va" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:318 msgid "wa" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:332 #, fuzzy msgid "ad" msgstr "Ende" #: src/emc/usr_intf/touchy/touchy.glade:346 msgid "bd" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:360 msgid "cd" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:374 msgid "ud" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:388 msgid "vd" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:402 msgid "wd" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:448 #, fuzzy msgid "Estop Reset" msgstr "Notaus gesetzt" #: src/emc/usr_intf/touchy/touchy.glade:459 #, fuzzy msgid "Estop" msgstr "Ausprobieren" #: src/emc/usr_intf/touchy/touchy.glade:475 #, fuzzy msgid "Machine On" msgstr "Maschine an" #: src/emc/usr_intf/touchy/touchy.glade:490 #, fuzzy msgid "Machine Off" msgstr "Maschine aus" #: src/emc/usr_intf/touchy/touchy.glade:531 #, fuzzy msgid "Power" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/touchy/touchy.glade:562 #, fuzzy msgid "Unhome All" msgstr "Referenzfahrt aufheben bei allen Achsen" #: src/emc/usr_intf/touchy/touchy.glade:588 #, fuzzy msgid "Home Selected" msgstr "Aktive Achse verfahren" #: src/emc/usr_intf/touchy/touchy.glade:603 #, fuzzy msgid "Unhome Selected" msgstr "Referenzfahrt aufheben bei allen Achsen" #: src/emc/usr_intf/touchy/touchy.glade:625 #: emc/usr_intf/pncconf/pncconf.glade:938 #, fuzzy msgid "Homing" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/touchy/touchy.glade:644 msgid "Startup" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:727 #, fuzzy msgid "G" msgstr "Ausführen" #: src/emc/usr_intf/touchy/touchy.glade:929 msgid "." msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:963 #: src/emc/usr_intf/pncconf/pncconf.glade:60883 #: src/emc/usr_intf/pncconf/pncconf.glade:60895 #: src/emc/usr_intf/pncconf/pncconf.glade:61017 #: src/emc/usr_intf/pncconf/pncconf.glade:61029 #: src/emc/usr_intf/pncconf/pncconf.glade:61041 #: src/emc/usr_intf/pncconf/pncconf.glade:61053 #: src/emc/usr_intf/pncconf/pncconf.glade:61065 #: src/emc/usr_intf/pncconf/pncconf.glade:61077 #: src/emc/usr_intf/pncconf/pncconf.glade:62040 #: src/emc/usr_intf/pncconf/pncconf.glade:62052 #: src/emc/usr_intf/pncconf/pncconf.glade:62064 #: src/emc/usr_intf/pncconf/pncconf.glade:62076 #: src/emc/usr_intf/pncconf/pncconf.glade:62088 #: src/emc/usr_intf/pncconf/pncconf.glade:62100 #: src/emc/usr_intf/pncconf/pncconf.glade:62222 #: src/emc/usr_intf/pncconf/pncconf.glade:62234 #: src/emc/usr_intf/pncconf/pncconf.glade:63069 #: src/emc/usr_intf/pncconf/pncconf.glade:63081 #: src/emc/usr_intf/pncconf/pncconf.glade:63203 #: src/emc/usr_intf/pncconf/pncconf.glade:63215 #: src/emc/usr_intf/pncconf/pncconf.glade:63227 #: src/emc/usr_intf/pncconf/pncconf.glade:63239 #: src/emc/usr_intf/pncconf/pncconf.glade:63251 #: src/emc/usr_intf/pncconf/pncconf.glade:63263 #: src/emc/usr_intf/pncconf/pncconf.glade:64226 #: src/emc/usr_intf/pncconf/pncconf.glade:64238 #: src/emc/usr_intf/pncconf/pncconf.glade:64250 #: src/emc/usr_intf/pncconf/pncconf.glade:64262 #: src/emc/usr_intf/pncconf/pncconf.glade:64274 #: src/emc/usr_intf/pncconf/pncconf.glade:64286 #: src/emc/usr_intf/pncconf/pncconf.glade:64408 #: src/emc/usr_intf/pncconf/pncconf.glade:64420 #: src/emc/usr_intf/pncconf/pncconf.glade:65231 #: src/emc/usr_intf/pncconf/pncconf.glade:65243 #: src/emc/usr_intf/pncconf/pncconf.glade:65359 #: src/emc/usr_intf/pncconf/pncconf.glade:65371 #: src/emc/usr_intf/pncconf/pncconf.glade:65383 #: src/emc/usr_intf/pncconf/pncconf.glade:65395 #: src/emc/usr_intf/pncconf/pncconf.glade:65407 #: src/emc/usr_intf/pncconf/pncconf.glade:65419 #: src/emc/usr_intf/pncconf/pncconf.glade:67091 #: emc/usr_intf/pncconf/pncconf.glade:1811 #: emc/usr_intf/pncconf/pncconf.glade:16127 #: emc/usr_intf/pncconf/pncconf.glade:18209 #: emc/usr_intf/pncconf/pncconf.glade:20693 #: emc/usr_intf/pncconf/pncconf.glade:20705 #: emc/usr_intf/pncconf/pncconf.glade:20717 #: emc/usr_intf/pncconf/pncconf.glade:20729 #: emc/usr_intf/pncconf/pncconf.glade:20741 #: emc/usr_intf/pncconf/pncconf.glade:20753 #: emc/usr_intf/pncconf/pncconf.glade:20869 #: emc/usr_intf/pncconf/pncconf.glade:20881 #: emc/usr_intf/pncconf/pncconf.glade:21700 #: emc/usr_intf/pncconf/pncconf.glade:21712 #: emc/usr_intf/pncconf/pncconf.glade:21724 #: emc/usr_intf/pncconf/pncconf.glade:21736 #: emc/usr_intf/pncconf/pncconf.glade:21748 #: emc/usr_intf/pncconf/pncconf.glade:21760 #: emc/usr_intf/pncconf/pncconf.glade:22400 #: emc/usr_intf/pncconf/pncconf.glade:22412 #: emc/usr_intf/pncconf/pncconf.glade:22424 #: emc/usr_intf/pncconf/pncconf.glade:22436 #: emc/usr_intf/pncconf/pncconf.glade:22448 #: emc/usr_intf/pncconf/pncconf.glade:22460 #: emc/usr_intf/pncconf/pncconf.glade:23100 #: emc/usr_intf/pncconf/pncconf.glade:23112 #: emc/usr_intf/pncconf/pncconf.glade:23124 #: emc/usr_intf/pncconf/pncconf.glade:23136 #: emc/usr_intf/pncconf/pncconf.glade:23148 #: emc/usr_intf/pncconf/pncconf.glade:23160 msgid "0" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:980 msgid "3" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:997 msgid "2" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:1014 #: emc/usr_intf/pncconf/pncconf.glade:15587 #: emc/usr_intf/pncconf/pncconf.glade:15612 #: emc/usr_intf/pncconf/pncconf.glade:17770 #: emc/usr_intf/pncconf/pncconf.glade:17794 msgid "1" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:1031 msgid "6" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:1048 msgid "5" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:1065 msgid "4" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:1082 msgid "9" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:1097 msgid "8" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:1112 msgid "7" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:1297 #, fuzzy msgid "Flood On" msgstr "Kühlmittel an" #: src/emc/usr_intf/touchy/touchy.glade:1308 #, fuzzy msgid "Flood Off" msgstr "Kühlmittel aus" #: src/emc/usr_intf/touchy/touchy.glade:1324 #, fuzzy msgid "Mist On" msgstr "Nebel an" #: src/emc/usr_intf/touchy/touchy.glade:1339 #, fuzzy msgid "Mist Off" msgstr "Nebel aus" #: src/emc/usr_intf/touchy/touchy.glade:1362 #, fuzzy msgid "Coolant" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/touchy/touchy.glade:1448 #, fuzzy msgid "Spindle Off" msgstr "Spindel aus" #: src/emc/usr_intf/touchy/touchy.glade:1501 #: src/emc/usr_intf/touchy/touchy.glade:2578 #, fuzzy msgid "Spindle speed:" msgstr "Spindelübersteuerung:" #: src/emc/usr_intf/touchy/touchy.glade:1513 #: src/emc/usr_intf/touchy/touchy.glade:2707 msgid "label26" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:1539 #, fuzzy msgid "Spindle" msgstr "Spindelencoder Index" #: src/emc/usr_intf/touchy/touchy.glade:1597 msgid "file.ngc" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:1812 #: src/emc/usr_intf/touchy/touchy.glade:2017 #: src/emc/usr_intf/touchy/touchy.glade:2037 #: src/emc/usr_intf/touchy/touchy.glade:2057 #: src/emc/usr_intf/touchy/touchy.glade:2077 #: src/emc/usr_intf/touchy/touchy.glade:2097 #: src/emc/usr_intf/touchy/touchy.glade:2117 #: src/emc/usr_intf/touchy/touchy.glade:2137 #: src/emc/usr_intf/touchy/touchy.glade:2157 #: src/emc/usr_intf/touchy/touchy.glade:2177 msgid "M2" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2244 #: src/emc/usr_intf/touchy/touchy.glade:2374 #, fuzzy msgid "Page" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/touchy/touchy.glade:2308 msgid "Start Point" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2452 msgid "Loaded File" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2488 msgid "Loaded file:" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2499 #, fuzzy msgid "Interpreted line:" msgstr "Interpreter-Liste" #: src/emc/usr_intf/touchy/touchy.glade:2513 #, fuzzy msgid "Distance:" msgstr "Vorschub-Weg:" #: src/emc/usr_intf/touchy/touchy.glade:2526 #: src/emc/usr_intf/stepconf/stepconf.glade:4148 #: src/emc/usr_intf/pncconf/pncconf.glade:60476 #: src/emc/usr_intf/pncconf/pncconf.glade:61571 #: src/emc/usr_intf/pncconf/pncconf.glade:62664 #: src/emc/usr_intf/pncconf/pncconf.glade:63757 #: src/emc/usr_intf/pncconf/pncconf.glade:64856 #: emc/usr_intf/stepconf/stepconf.glade:4247 #: emc/usr_intf/pncconf/pncconf.glade:20313 #: emc/usr_intf/pncconf/pncconf.glade:21336 #: emc/usr_intf/pncconf/pncconf.glade:22036 #: emc/usr_intf/pncconf/pncconf.glade:22736 msgid "Velocity:" msgstr "Geschwindigkeit:" #: src/emc/usr_intf/touchy/touchy.glade:2539 msgid "Delay:" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2552 msgid "On limit switch:" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2565 #, fuzzy msgid "Spindle direction:" msgstr "Spindel PWM" #: src/emc/usr_intf/touchy/touchy.glade:2591 #, fuzzy msgid "Loaded tool:" msgstr "Kein Werkzeug" #: src/emc/usr_intf/touchy/touchy.glade:2604 #: src/emc/usr_intf/touchy/touchy.glade:2955 msgid "label19" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2617 msgid "label20" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2632 #: src/emc/usr_intf/touchy/touchy.glade:2779 #: src/emc/usr_intf/touchy/touchy.glade:2808 #: src/emc/usr_intf/touchy/touchy.glade:2912 #: src/emc/usr_intf/touchy/touchy.glade:2927 msgid "label21" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2647 msgid "label22" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2662 msgid "label23" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2677 msgid "label24" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2692 msgid "label25" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2722 msgid "label27" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2737 msgid "Prepped tool:" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2750 msgid "label28" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2765 msgid "Running line:" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2794 #, fuzzy msgid "XY Rotation:" msgstr "_Referenzpunkt:" #: src/emc/usr_intf/touchy/touchy.glade:2823 #, fuzzy msgid "Tool length:" msgstr "Werkzeugdatei" #: src/emc/usr_intf/touchy/touchy.glade:2836 msgid "label52" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2851 msgid "" "G1 G2 G3\n" "M1 M2 M3\n" "F1 S1" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2870 #, fuzzy msgid "Active codes:" msgstr "Aktive G-Codes:" #: src/emc/usr_intf/touchy/touchy.glade:2883 #, fuzzy msgid "G5x Offset:" msgstr "Werkzeugoffset:" #: src/emc/usr_intf/touchy/touchy.glade:2898 #, fuzzy msgid "G92 Offset:" msgstr "Werkzeugoffset:" #: src/emc/usr_intf/touchy/touchy.glade:2942 msgid "Loaded file lines:" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2971 msgid "Pockets:" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:2984 msgid "" "1\n" "2\n" "3" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3009 #, fuzzy msgid "Status" msgstr "Status:" #: src/emc/usr_intf/touchy/touchy.glade:3038 #, fuzzy msgid "Control Font:" msgstr "Strg-M" #: src/emc/usr_intf/touchy/touchy.glade:3050 #, fuzzy msgid "DRO Font:" msgstr "Schriftart" #: src/emc/usr_intf/touchy/touchy.glade:3064 #, fuzzy msgid "Error Font:" msgstr "Fehler" #: src/emc/usr_intf/touchy/touchy.glade:3081 #, fuzzy msgid "ControlFont" msgstr "Strg-M" #: src/emc/usr_intf/touchy/touchy.glade:3100 #, fuzzy msgid "DRO Font" msgstr "Schriftart" #: src/emc/usr_intf/touchy/touchy.glade:3121 #, fuzzy msgid "Error Font" msgstr "Fehler" #: src/emc/usr_intf/touchy/touchy.glade:3139 msgid "Listing Font:" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3156 #, fuzzy msgid "Listing Font" msgstr "Schrift auswählen" #: src/emc/usr_intf/touchy/touchy.glade:3176 msgid "Hide pointer" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3187 #, fuzzy msgid "Show pointer" msgstr "V_orschau anzeigen" #: src/emc/usr_intf/touchy/touchy.glade:3214 msgid "Theme:" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3228 #, fuzzy msgid "default\n" msgstr "Benutzen der Standartwerte" #: src/emc/usr_intf/touchy/touchy.glade:3252 msgid "Display Options" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3286 msgid "Inch" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3349 msgid "Position Readout" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3379 msgid "Workpiece" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3390 msgid "Fixture" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3410 #, fuzzy msgid "Tool Setting" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/touchy/touchy.glade:3441 #, fuzzy msgid "Delete / lines" msgstr "Löschen" #: src/emc/usr_intf/touchy/touchy.glade:3456 msgid "Keep / lines" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3473 #, fuzzy msgid "Pause on M1" msgstr "Pause" #: src/emc/usr_intf/touchy/touchy.glade:3484 msgid "Ignore M1" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3504 #, fuzzy msgid "Program Options" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/touchy/touchy.glade:3531 msgid "Preferences" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3567 msgid "FO: 100%" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3582 msgid "SO: 100%" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3596 msgid "MV: 100" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3610 msgid "Jogging" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3637 msgid ".01" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3650 msgid ".001" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3666 msgid ".0001" msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3694 msgid " X " msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3706 msgid " Y " msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3721 msgid " Z " msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3736 msgid " A " msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3752 msgid " B " msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3770 msgid " C " msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3788 msgid " U " msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3804 msgid " V " msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3822 msgid " W " msgstr "" #: src/emc/usr_intf/touchy/touchy.glade:3855 #, fuzzy msgid "Handwheel" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/stepconf/stepconf.py:53 #: emc/usr_intf/stepconf/stepconf.py:53 msgid "" "Stepconf encountered an error. The following information may be useful in " "troubleshooting:\n" "\n" msgstr "" "Beim Ausführen von Stepconf ist ein Fehler aufgetreten. Die folgenden " "Informationen können bei der Behebung hilfreich sein:\n" "\n" #: src/emc/usr_intf/stepconf/stepconf.py:70 #: src/emc/usr_intf/pncconf/pncconf.py:133 #: emc/usr_intf/stepconf/stepconf.py:71 emc/usr_intf/pncconf/pncconf.py:95 msgid "Gecko 201" msgstr "Gecko 201" #: src/emc/usr_intf/stepconf/stepconf.py:71 #: src/emc/usr_intf/pncconf/pncconf.py:134 #: emc/usr_intf/stepconf/stepconf.py:72 emc/usr_intf/pncconf/pncconf.py:96 msgid "Gecko 202" msgstr "Gecko 202" #: src/emc/usr_intf/stepconf/stepconf.py:72 #: src/emc/usr_intf/pncconf/pncconf.py:135 #: emc/usr_intf/stepconf/stepconf.py:73 emc/usr_intf/pncconf/pncconf.py:97 msgid "Gecko 203v" msgstr "Gecko 203v" #: src/emc/usr_intf/stepconf/stepconf.py:73 #: src/emc/usr_intf/pncconf/pncconf.py:136 #: emc/usr_intf/stepconf/stepconf.py:74 emc/usr_intf/pncconf/pncconf.py:98 msgid "Gecko 210" msgstr "Gecko 210" #: src/emc/usr_intf/stepconf/stepconf.py:74 #: src/emc/usr_intf/pncconf/pncconf.py:137 #: emc/usr_intf/stepconf/stepconf.py:75 emc/usr_intf/pncconf/pncconf.py:99 msgid "Gecko 212" msgstr "Gecko 212" #: src/emc/usr_intf/stepconf/stepconf.py:75 #: src/emc/usr_intf/pncconf/pncconf.py:138 #: emc/usr_intf/stepconf/stepconf.py:76 emc/usr_intf/pncconf/pncconf.py:100 msgid "Gecko 320" msgstr "Gecko 320" #: src/emc/usr_intf/stepconf/stepconf.py:76 #: src/emc/usr_intf/pncconf/pncconf.py:139 #: emc/usr_intf/stepconf/stepconf.py:77 emc/usr_intf/pncconf/pncconf.py:101 msgid "Gecko 540" msgstr "Gecko 540" #: src/emc/usr_intf/stepconf/stepconf.py:77 #: src/emc/usr_intf/pncconf/pncconf.py:140 #: emc/usr_intf/stepconf/stepconf.py:78 emc/usr_intf/pncconf/pncconf.py:102 msgid "L297" msgstr "L297" #: src/emc/usr_intf/stepconf/stepconf.py:78 #: src/emc/usr_intf/pncconf/pncconf.py:141 #: emc/usr_intf/stepconf/stepconf.py:79 emc/usr_intf/pncconf/pncconf.py:103 msgid "PMDX-150" msgstr "PMDX-150" #: src/emc/usr_intf/stepconf/stepconf.py:79 #: src/emc/usr_intf/pncconf/pncconf.py:142 #: emc/usr_intf/stepconf/stepconf.py:80 emc/usr_intf/pncconf/pncconf.py:104 msgid "Sherline" msgstr "Sherline" #: src/emc/usr_intf/stepconf/stepconf.py:80 #: src/emc/usr_intf/pncconf/pncconf.py:143 #: emc/usr_intf/stepconf/stepconf.py:81 emc/usr_intf/pncconf/pncconf.py:105 msgid "Xylotex 8S-3" msgstr "Xylotex 8S-3" #: src/emc/usr_intf/stepconf/stepconf.py:81 #: src/emc/usr_intf/pncconf/pncconf.py:144 #: emc/usr_intf/stepconf/stepconf.py:82 emc/usr_intf/pncconf/pncconf.py:106 msgid "Parker-Compumotor oem750" msgstr "Parker-Compumotor oem750" #: src/emc/usr_intf/stepconf/stepconf.py:82 #: src/emc/usr_intf/pncconf/pncconf.py:145 #: emc/usr_intf/stepconf/stepconf.py:83 emc/usr_intf/pncconf/pncconf.py:107 msgid "JVL-SMD41 or 42" msgstr "JVL-SMD41 oder 42" #: src/emc/usr_intf/stepconf/stepconf.py:83 #: src/emc/usr_intf/pncconf/pncconf.py:146 #: emc/usr_intf/stepconf/stepconf.py:84 emc/usr_intf/pncconf/pncconf.py:108 msgid "Hobbycnc Pro Chopper" msgstr "Hobbycnc Pro Chopper" #: src/emc/usr_intf/stepconf/stepconf.py:84 #: src/emc/usr_intf/pncconf/pncconf.py:147 #: emc/usr_intf/stepconf/stepconf.py:85 emc/usr_intf/pncconf/pncconf.py:109 msgid "Keling 4030" msgstr "Keling 4030" #: src/emc/usr_intf/stepconf/stepconf.py:153 #: emc/usr_intf/stepconf/stepconf.py:144 msgid "X Step" msgstr "X Schritt" #: src/emc/usr_intf/stepconf/stepconf.py:153 #: emc/usr_intf/stepconf/stepconf.py:144 msgid "X Direction" msgstr "X Richtung" #: src/emc/usr_intf/stepconf/stepconf.py:153 #: emc/usr_intf/stepconf/stepconf.py:144 msgid "Y Step" msgstr "Y Schritt" #: src/emc/usr_intf/stepconf/stepconf.py:153 #: emc/usr_intf/stepconf/stepconf.py:144 msgid "Y Direction" msgstr "Y Richtung" #: src/emc/usr_intf/stepconf/stepconf.py:154 #: emc/usr_intf/stepconf/stepconf.py:145 msgid "Z Step" msgstr "Z Schritt" #: src/emc/usr_intf/stepconf/stepconf.py:154 #: emc/usr_intf/stepconf/stepconf.py:145 msgid "Z Direction" msgstr "Z Richtung" #: src/emc/usr_intf/stepconf/stepconf.py:154 #: emc/usr_intf/stepconf/stepconf.py:145 msgid "A Step" msgstr "A Schritt" #: src/emc/usr_intf/stepconf/stepconf.py:154 #: emc/usr_intf/stepconf/stepconf.py:145 msgid "A Direction" msgstr "A Richtung" #: src/emc/usr_intf/stepconf/stepconf.py:155 #: src/emc/usr_intf/pncconf/pncconf.py:440 #: emc/usr_intf/stepconf/stepconf.py:146 emc/usr_intf/pncconf/pncconf.py:237 msgid "Spindle ON" msgstr "Spindel ein" #: src/emc/usr_intf/stepconf/stepconf.py:155 #: src/emc/usr_intf/pncconf/pncconf.py:557 #: emc/usr_intf/stepconf/stepconf.py:146 msgid "Spindle PWM" msgstr "Spindel PWM" #: src/emc/usr_intf/stepconf/stepconf.py:155 #: src/emc/usr_intf/pncconf/pncconf.py:440 #: emc/usr_intf/stepconf/stepconf.py:146 emc/usr_intf/pncconf/pncconf.py:237 msgid "Spindle Brake" msgstr "Spindelbremse" #: src/emc/usr_intf/stepconf/stepconf.py:156 #: src/emc/usr_intf/pncconf/pncconf.py:441 #: emc/usr_intf/stepconf/stepconf.py:147 emc/usr_intf/pncconf/pncconf.py:238 msgid "Coolant Mist" msgstr "Kühlnebel" #: src/emc/usr_intf/stepconf/stepconf.py:156 #: src/emc/usr_intf/pncconf/pncconf.py:441 #: emc/usr_intf/stepconf/stepconf.py:147 emc/usr_intf/pncconf/pncconf.py:238 msgid "Coolant Flood" msgstr "Kühlmittel" #: src/emc/usr_intf/stepconf/stepconf.py:156 #: src/emc/usr_intf/pncconf/pncconf.py:442 #: emc/usr_intf/stepconf/stepconf.py:147 emc/usr_intf/pncconf/pncconf.py:238 msgid "ESTOP Out" msgstr "NOTAUS Ausgang" #: src/emc/usr_intf/stepconf/stepconf.py:156 #: emc/usr_intf/stepconf/stepconf.py:147 emc/usr_intf/pncconf/pncconf.py:238 msgid "Amplifier Enable" msgstr "Endstufe aktivieren" #: src/emc/usr_intf/stepconf/stepconf.py:157 #: src/emc/usr_intf/pncconf/pncconf.py:443 #: emc/usr_intf/stepconf/stepconf.py:148 emc/usr_intf/pncconf/pncconf.py:239 msgid "Charge Pump" msgstr "Ladungspumpe" #: src/emc/usr_intf/stepconf/stepconf.py:158 #: src/emc/usr_intf/pncconf/pncconf.py:444 #: emc/usr_intf/stepconf/stepconf.py:149 emc/usr_intf/pncconf/pncconf.py:240 msgid "Digital out 0" msgstr "Digitaler Ausgang 0" #: src/emc/usr_intf/stepconf/stepconf.py:158 #: src/emc/usr_intf/pncconf/pncconf.py:444 #: emc/usr_intf/stepconf/stepconf.py:149 emc/usr_intf/pncconf/pncconf.py:240 msgid "Digital out 1" msgstr "Digitaler Ausgang 1" #: src/emc/usr_intf/stepconf/stepconf.py:158 #: src/emc/usr_intf/pncconf/pncconf.py:444 #: emc/usr_intf/stepconf/stepconf.py:149 emc/usr_intf/pncconf/pncconf.py:240 msgid "Digital out 2" msgstr "Digitaler Ausgang 2" #: src/emc/usr_intf/stepconf/stepconf.py:158 #: src/emc/usr_intf/pncconf/pncconf.py:444 #: emc/usr_intf/stepconf/stepconf.py:149 emc/usr_intf/pncconf/pncconf.py:240 msgid "Digital out 3" msgstr "Digitaler Ausgang 1" #: src/emc/usr_intf/stepconf/stepconf.py:159 #: src/emc/usr_intf/stepconf/stepconf.py:178 #: emc/usr_intf/stepconf/stepconf.py:150 emc/usr_intf/stepconf/stepconf.py:169 msgid "Unused" msgstr "Unbenutzt" #: src/emc/usr_intf/stepconf/stepconf.py:161 #: src/emc/usr_intf/pncconf/pncconf.py:471 #: emc/usr_intf/stepconf/stepconf.py:152 emc/usr_intf/pncconf/pncconf.py:242 msgid "ESTOP In" msgstr "NOTAUS Eingang" #: src/emc/usr_intf/stepconf/stepconf.py:161 #: src/emc/usr_intf/pncconf/pncconf.py:471 #: emc/usr_intf/stepconf/stepconf.py:152 emc/usr_intf/pncconf/pncconf.py:242 msgid "Probe In" msgstr "Sensor" #: src/emc/usr_intf/stepconf/stepconf.py:162 #: emc/usr_intf/stepconf/stepconf.py:153 msgid "Spindle Index" msgstr "Spindelencoder Index" #: src/emc/usr_intf/stepconf/stepconf.py:162 #: emc/usr_intf/stepconf/stepconf.py:153 msgid "Spindle Phase A" msgstr "Spindelencoder Kanal A" #: src/emc/usr_intf/stepconf/stepconf.py:162 #: emc/usr_intf/stepconf/stepconf.py:153 msgid "Spindle Phase B" msgstr "Spindelencoder Kanal B" #: src/emc/usr_intf/stepconf/stepconf.py:163 #: emc/usr_intf/stepconf/stepconf.py:154 emc/usr_intf/pncconf/pncconf.py:2607 #: emc/usr_intf/pncconf/pncconf.py:2849 emc/usr_intf/pncconf/pncconf.py:3099 msgid "Home X" msgstr "Referenzschalter X" #: src/emc/usr_intf/stepconf/stepconf.py:163 #: emc/usr_intf/stepconf/stepconf.py:154 emc/usr_intf/pncconf/pncconf.py:2607 #: emc/usr_intf/pncconf/pncconf.py:2849 emc/usr_intf/pncconf/pncconf.py:3099 msgid "Home Y" msgstr "Referenzschalter Y" #: src/emc/usr_intf/stepconf/stepconf.py:163 #: emc/usr_intf/stepconf/stepconf.py:154 emc/usr_intf/pncconf/pncconf.py:2607 #: emc/usr_intf/pncconf/pncconf.py:2849 emc/usr_intf/pncconf/pncconf.py:3099 msgid "Home Z" msgstr "Referenzschalter Z" #: src/emc/usr_intf/stepconf/stepconf.py:163 #: emc/usr_intf/stepconf/stepconf.py:154 emc/usr_intf/pncconf/pncconf.py:2607 #: emc/usr_intf/pncconf/pncconf.py:2849 emc/usr_intf/pncconf/pncconf.py:3099 msgid "Home A" msgstr "Referenzschalter A" #: src/emc/usr_intf/stepconf/stepconf.py:164 #: emc/usr_intf/stepconf/stepconf.py:155 emc/usr_intf/pncconf/pncconf.py:255 msgid "Minimum Limit + Home X" msgstr "Min. End. + Ref. X" #: src/emc/usr_intf/stepconf/stepconf.py:164 #: emc/usr_intf/stepconf/stepconf.py:155 emc/usr_intf/pncconf/pncconf.py:255 msgid "Minimum Limit + Home Y" msgstr "Min. End. + Ref. Y" #: src/emc/usr_intf/stepconf/stepconf.py:165 #: emc/usr_intf/stepconf/stepconf.py:156 emc/usr_intf/pncconf/pncconf.py:256 msgid "Minimum Limit + Home Z" msgstr "Min. End. + Ref. Z" #: src/emc/usr_intf/stepconf/stepconf.py:165 #: emc/usr_intf/stepconf/stepconf.py:156 emc/usr_intf/pncconf/pncconf.py:256 msgid "Minimum Limit + Home A" msgstr "Min. End. + Ref. A" #: src/emc/usr_intf/stepconf/stepconf.py:166 #: emc/usr_intf/stepconf/stepconf.py:157 emc/usr_intf/pncconf/pncconf.py:257 msgid "Maximum Limit + Home X" msgstr "Max. End. + Ref. X" #: src/emc/usr_intf/stepconf/stepconf.py:166 #: emc/usr_intf/stepconf/stepconf.py:157 emc/usr_intf/pncconf/pncconf.py:257 msgid "Maximum Limit + Home Y" msgstr "Max. End. + Ref. Y" #: src/emc/usr_intf/stepconf/stepconf.py:167 #: emc/usr_intf/stepconf/stepconf.py:158 emc/usr_intf/pncconf/pncconf.py:258 msgid "Maximum Limit + Home Z" msgstr "Max. End. + Ref. Z" #: src/emc/usr_intf/stepconf/stepconf.py:167 #: emc/usr_intf/stepconf/stepconf.py:158 emc/usr_intf/pncconf/pncconf.py:258 msgid "Maximum Limit + Home A" msgstr "Max. End. + Ref. A" #: src/emc/usr_intf/stepconf/stepconf.py:168 #: emc/usr_intf/stepconf/stepconf.py:159 emc/usr_intf/pncconf/pncconf.py:259 msgid "Both Limit + Home X" msgstr "Beide End. + Ref. X" #: src/emc/usr_intf/stepconf/stepconf.py:168 #: emc/usr_intf/stepconf/stepconf.py:159 emc/usr_intf/pncconf/pncconf.py:259 msgid "Both Limit + Home Y" msgstr "Beide End. + Ref. Y" #: src/emc/usr_intf/stepconf/stepconf.py:169 #: emc/usr_intf/stepconf/stepconf.py:160 emc/usr_intf/pncconf/pncconf.py:260 msgid "Both Limit + Home Z" msgstr "Beide End. + Ref. Z" #: src/emc/usr_intf/stepconf/stepconf.py:169 #: emc/usr_intf/stepconf/stepconf.py:160 emc/usr_intf/pncconf/pncconf.py:260 msgid "Both Limit + Home A" msgstr "Beide End. + Ref. A" #: src/emc/usr_intf/stepconf/stepconf.py:170 #: emc/usr_intf/stepconf/stepconf.py:161 emc/usr_intf/pncconf/pncconf.py:262 msgid "Minimum Limit X" msgstr "Endschalter Mimimum X" #: src/emc/usr_intf/stepconf/stepconf.py:170 #: emc/usr_intf/stepconf/stepconf.py:161 emc/usr_intf/pncconf/pncconf.py:262 msgid "Minimum Limit Y" msgstr "Endschalter Mimimum Y" #: src/emc/usr_intf/stepconf/stepconf.py:171 #: emc/usr_intf/stepconf/stepconf.py:162 emc/usr_intf/pncconf/pncconf.py:263 msgid "Minimum Limit Z" msgstr "Endschalter Mimimum Z" #: src/emc/usr_intf/stepconf/stepconf.py:171 #: emc/usr_intf/stepconf/stepconf.py:162 emc/usr_intf/pncconf/pncconf.py:263 msgid "Minimum Limit A" msgstr "Endschalter Mimimum A" #: src/emc/usr_intf/stepconf/stepconf.py:172 #: emc/usr_intf/stepconf/stepconf.py:163 emc/usr_intf/pncconf/pncconf.py:264 msgid "Maximum Limit X" msgstr "Endschalter Maximum X" #: src/emc/usr_intf/stepconf/stepconf.py:172 #: emc/usr_intf/stepconf/stepconf.py:163 emc/usr_intf/pncconf/pncconf.py:264 msgid "Maximum Limit Y" msgstr "Endschalter Maximum Y" #: src/emc/usr_intf/stepconf/stepconf.py:173 #: emc/usr_intf/stepconf/stepconf.py:164 emc/usr_intf/pncconf/pncconf.py:265 msgid "Maximum Limit Z" msgstr "Endschalter Maximum Z" #: src/emc/usr_intf/stepconf/stepconf.py:173 #: emc/usr_intf/stepconf/stepconf.py:164 emc/usr_intf/pncconf/pncconf.py:265 msgid "Maximum Limit A" msgstr "Endschalter Maximum Z" #: src/emc/usr_intf/stepconf/stepconf.py:174 #: emc/usr_intf/stepconf/stepconf.py:165 emc/usr_intf/pncconf/pncconf.py:266 msgid "Both Limit X" msgstr "Beide Endschalter X" #: src/emc/usr_intf/stepconf/stepconf.py:174 #: emc/usr_intf/stepconf/stepconf.py:165 emc/usr_intf/pncconf/pncconf.py:266 msgid "Both Limit Y" msgstr "Beide Endschalter Y" #: src/emc/usr_intf/stepconf/stepconf.py:175 #: emc/usr_intf/stepconf/stepconf.py:166 emc/usr_intf/pncconf/pncconf.py:267 msgid "Both Limit Z" msgstr "Beide Endschalter Z" #: src/emc/usr_intf/stepconf/stepconf.py:175 #: emc/usr_intf/stepconf/stepconf.py:166 emc/usr_intf/pncconf/pncconf.py:267 msgid "Both Limit A" msgstr "Beide Endschalter A" #: src/emc/usr_intf/stepconf/stepconf.py:176 #: emc/usr_intf/stepconf/stepconf.py:167 emc/usr_intf/pncconf/pncconf.py:250 #: emc/usr_intf/pncconf/pncconf.py:267 msgid "All limits" msgstr "Alle Endschalter" #: src/emc/usr_intf/stepconf/stepconf.py:176 #: emc/usr_intf/stepconf/stepconf.py:167 emc/usr_intf/pncconf/pncconf.py:250 #: emc/usr_intf/pncconf/pncconf.py:2607 emc/usr_intf/pncconf/pncconf.py:2849 #: emc/usr_intf/pncconf/pncconf.py:3099 msgid "All home" msgstr "Alle Referenzschalter" #: src/emc/usr_intf/stepconf/stepconf.py:176 #, fuzzy msgid "All limits + homes" msgstr "Alle Endschalter" #: src/emc/usr_intf/stepconf/stepconf.py:177 #: src/emc/usr_intf/pncconf/pncconf.py:463 #: emc/usr_intf/stepconf/stepconf.py:168 emc/usr_intf/pncconf/pncconf.py:251 msgid "Digital in 0" msgstr "Digitaler Eingang 0" #: src/emc/usr_intf/stepconf/stepconf.py:177 #: src/emc/usr_intf/pncconf/pncconf.py:463 #: emc/usr_intf/stepconf/stepconf.py:168 emc/usr_intf/pncconf/pncconf.py:251 msgid "Digital in 1" msgstr "Digitaler Eingang 1" #: src/emc/usr_intf/stepconf/stepconf.py:177 #: src/emc/usr_intf/pncconf/pncconf.py:463 #: emc/usr_intf/stepconf/stepconf.py:168 emc/usr_intf/pncconf/pncconf.py:251 msgid "Digital in 2" msgstr "Digitaler Eingang 2" #: src/emc/usr_intf/stepconf/stepconf.py:177 #: src/emc/usr_intf/pncconf/pncconf.py:463 #: emc/usr_intf/stepconf/stepconf.py:168 emc/usr_intf/pncconf/pncconf.py:251 msgid "Digital in 3" msgstr "Digitaler Eingang 3" #: src/emc/usr_intf/stepconf/stepconf.py:203 #: emc/usr_intf/stepconf/stepconf.py:194 msgid "my-mill" msgstr "Meine-Maschine" #: src/emc/usr_intf/stepconf/stepconf.py:215 #: src/emc/usr_intf/stepconf/stepconf.py:217 #: src/emc/usr_intf/pncconf/pncconf.py:983 #: src/emc/usr_intf/pncconf/pncconf.py:985 #: emc/usr_intf/stepconf/stepconf.py:206 emc/usr_intf/stepconf/stepconf.py:208 #: emc/usr_intf/pncconf/pncconf.py:378 emc/usr_intf/pncconf/pncconf.py:380 msgid "Enter Address" msgstr "Adresse eingeben" #: src/emc/usr_intf/stepconf/stepconf.py:375 #: emc/usr_intf/stepconf/stepconf.py:363 #, python-format msgid "File %r was modified since it was written by stepconf" msgstr "Die Date %r wurde geändert, seitdem sie mit stepconf erstellt wurde." #: src/emc/usr_intf/stepconf/stepconf.py:378 #: emc/usr_intf/stepconf/stepconf.py:366 msgid "" "Saving this configuration file will discard configuration changes made " "outside stepconf." msgstr "" "Beim speichern dieser Konfiguration werden Änderungen, die nicht mit " "stepconf durchgeführt wurden, überschrieben." #: src/emc/usr_intf/stepconf/stepconf.py:393 #: src/emc/usr_intf/pncconf/pncconf.py:1356 #: emc/usr_intf/stepconf/stepconf.py:381 emc/usr_intf/pncconf/pncconf.py:772 msgid "Continue? " msgstr "Fortsetzen?" #: src/emc/usr_intf/stepconf/stepconf.py:394 #: src/emc/usr_intf/pncconf/pncconf.py:1357 #: emc/usr_intf/stepconf/stepconf.py:382 emc/usr_intf/pncconf/pncconf.py:773 msgid "yY" msgstr "jJ" #: src/emc/usr_intf/stepconf/stepconf.py:446 #: src/emc/usr_intf/stepconf/stepconf.py:786 #: emc/usr_intf/stepconf/stepconf.py:434 emc/usr_intf/stepconf/stepconf.py:760 #, python-format msgid "# Generated by stepconf at %s" msgstr "# Erstellt von stepconf am %s" #: src/emc/usr_intf/stepconf/stepconf.py:447 #: src/emc/usr_intf/stepconf/stepconf.py:787 #: src/emc/usr_intf/pncconf/pncconf.py:1366 #: src/emc/usr_intf/pncconf/pncconf.py:2369 #: emc/usr_intf/stepconf/stepconf.py:435 emc/usr_intf/stepconf/stepconf.py:761 #: emc/usr_intf/pncconf/pncconf.py:782 emc/usr_intf/pncconf/pncconf.py:1258 msgid "# If you make changes to this file, they will be" msgstr "# Änderungen an dieser Datei werden beim nächsten" #: src/emc/usr_intf/stepconf/stepconf.py:448 #: src/emc/usr_intf/stepconf/stepconf.py:788 #: emc/usr_intf/stepconf/stepconf.py:436 emc/usr_intf/stepconf/stepconf.py:762 msgid "# overwritten when you run stepconf again" msgstr "# Aufruf von stepconf überschrieben." #: src/emc/usr_intf/stepconf/stepconf.py:516 #: emc/usr_intf/stepconf/stepconf.py:504 msgid "# add halui MDI commands here (max 64) " msgstr "# HalUI-MDI-Befehle hier einfügen (max. 64)" #: src/emc/usr_intf/stepconf/stepconf.py:991 #: src/emc/usr_intf/pncconf/pncconf.py:2991 #: emc/usr_intf/stepconf/stepconf.py:935 emc/usr_intf/pncconf/pncconf.py:1514 msgid "# **** Setup for external estop ladder program -START ****" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:998 #: src/emc/usr_intf/pncconf/pncconf.py:2998 #: emc/usr_intf/stepconf/stepconf.py:942 emc/usr_intf/pncconf/pncconf.py:1521 msgid "# **** Setup for external estop ladder program -END ****" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1018 #: src/emc/usr_intf/pncconf/pncconf.py:3025 #: emc/usr_intf/stepconf/stepconf.py:962 emc/usr_intf/pncconf/pncconf.py:1543 msgid "" "# Load Classicladder with modbus master included (GUI must run for Modbus)" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1021 #: src/emc/usr_intf/pncconf/pncconf.py:3030 #: emc/usr_intf/stepconf/stepconf.py:965 emc/usr_intf/pncconf/pncconf.py:1546 msgid "# Load Classicladder without GUI (can reload LADDER GUI in AXIS GUI" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1031 #: src/emc/usr_intf/pncconf/pncconf.py:3112 #: emc/usr_intf/stepconf/stepconf.py:975 emc/usr_intf/pncconf/pncconf.py:1556 msgid "Include your PyVCP panel here.\n" msgstr "Benutzerdefiniertes PyVCP-Panel hier einbinden.\n" #: src/emc/usr_intf/stepconf/stepconf.py:1040 #: src/emc/usr_intf/stepconf/stepconf.py:1087 #: emc/usr_intf/stepconf/stepconf.py:984 #: emc/usr_intf/stepconf/stepconf.py:1010 emc/usr_intf/pncconf/pncconf.py:1565 #: emc/usr_intf/pncconf/pncconf.py:1626 msgid "# Include your customized HAL commands here" msgstr "" "# Benutzerdefinierte HAL-Anweisungen können nachfolgend angegeben werden" #: src/emc/usr_intf/stepconf/stepconf.py:1041 #: emc/usr_intf/stepconf/stepconf.py:985 emc/usr_intf/pncconf/pncconf.py:1566 msgid "" "# The commands in this file are run after the AXIS GUI (including PyVCP " "panel) starts" msgstr "" "# Die Befehle in dieser Datei werden nach der AXIS GUI (und PyVCP-Panel) " "ausgeführt." #: src/emc/usr_intf/stepconf/stepconf.py:1045 #: src/emc/usr_intf/pncconf/pncconf.py:3140 msgid "# **** Setup of spindle speed display using pyvcp -START ****" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1047 #: emc/usr_intf/stepconf/stepconf.py:991 emc/usr_intf/pncconf/pncconf.py:1572 msgid "# **** Use ACTUAL spindle velocity from spindle encoder" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1048 msgid "# **** spindle-velocity bounces around so we filter it with lowpass" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1049 msgid "" "# **** spindle-velocity is signed so we use absolute component to remove sign" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1050 #: emc/usr_intf/stepconf/stepconf.py:993 emc/usr_intf/pncconf/pncconf.py:1574 msgid "# **** ACTUAL velocity is in RPS not RPM so we scale it." msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1059 msgid "# **** set up spindle at speed indicator ****" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1072 msgid "" "# **** Use COMMANDED spindle velocity from LinuxCNC because no spindle " "encoder was specified" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1073 #: emc/usr_intf/stepconf/stepconf.py:1001 emc/usr_intf/pncconf/pncconf.py:1582 msgid "" "# **** COMANDED velocity is signed so we use absolute component (abs.0) to " "remove sign" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1088 #: emc/usr_intf/stepconf/stepconf.py:1011 msgid "# This file will not be overwritten when you run stepconf again" msgstr "" "# Diese Datei wird überschrieben, wenn stepconf erneut ausgeführt wird." #: src/emc/usr_intf/stepconf/stepconf.py:1095 #: emc/usr_intf/stepconf/stepconf.py:1018 #, python-format msgid "Generated by stepconf at %s" msgstr "Erstell durch stepconf am %s" #: src/emc/usr_intf/stepconf/stepconf.py:1166 #: src/emc/usr_intf/pncconf/pncconf.py:3451 #: emc/usr_intf/stepconf/stepconf.py:1091 emc/usr_intf/pncconf/pncconf.py:1778 #, python-format msgid "launch %s" msgstr "%s starten" #: src/emc/usr_intf/stepconf/stepconf.py:1170 #, fuzzy msgid "Desktop Launcher for LinuxCNC config made by Stepconf" msgstr "" "Verknüpfung zum starten von EMC mit einer festgelegten Konfiguration, " "erstellt von Stepconf" #: src/emc/usr_intf/stepconf/stepconf.py:1196 #: src/emc/usr_intf/pncconf/pncconf.py:3700 #: emc/usr_intf/stepconf/stepconf.py:1119 emc/usr_intf/pncconf/pncconf.py:1916 #, python-format msgid "%s Axis Configuration" msgstr "Konfiguration der %s-Achse" #: src/emc/usr_intf/stepconf/stepconf.py:1238 #: src/emc/usr_intf/stepconf/stepconf.py:1337 #: emc/usr_intf/stepconf/stepconf.py:1161 #: emc/usr_intf/stepconf/stepconf.py:1247 msgid "Other" msgstr "Benutzerdefiniert" #: src/emc/usr_intf/stepconf/stepconf.py:1249 #: emc/usr_intf/stepconf/stepconf.py:1172 msgid "Quit Stepconf and discard changes?" msgstr "Maschinenkonfiguration beenden und Änderungen verwerfen?" #: src/emc/usr_intf/stepconf/stepconf.py:1280 msgid "" "You are using a simulated-realtime version of LinuxCNC, so testing / tuning " "of hardware is unavailable." msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1283 msgid "" "You are using a realtime version of LinuxCNC but didn't load a realtime " "kernel so testing / tuning of hardware is unavailable.\n" "This is possibly because you updated the OS and it doesn't automatically " "load the RTAI kernel anymore.\n" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.py:1298 #, fuzzy msgid "LinuxCNC 'stepconf' configuration files" msgstr ".stepconf Dateien" #: src/emc/usr_intf/stepconf/stepconf.py:1299 #: src/emc/usr_intf/pncconf/pncconf.py:4094 #: emc/usr_intf/stepconf/stepconf.py:1209 emc/usr_intf/pncconf/pncconf.py:2081 msgid "Modify Existing Configuration" msgstr "Bestehende Konfiguration bearbeiten" #: src/emc/usr_intf/stepconf/stepconf.py:1439 #: emc/usr_intf/stepconf/stepconf.py:1630 msgid "" "You need to designate an E-stop input pin in the Parallel Port Setup page " "for this program." msgstr "" "Für dieses Programm muss ein Notaus-Eingang auf der Seite zur Konfiguration " "der parallelen Schnitstelle festgelegt wein." #: src/emc/usr_intf/stepconf/stepconf.py:1452 #: emc/usr_intf/stepconf/stepconf.py:1643 emc/usr_intf/pncconf/pncconf.py:3716 msgid "" "OK to replace existing custom ladder program?\n" "Existing Custom.clp will be renamed custom_backup.clp.\n" "Any existing file named -custom_backup.clp- will be lost. " msgstr "" "Mit »OK« wird das bestehende benutzerdefinierte SPS-Programm ersetzt.\n" "Eine bestehende »Custom.clp«-Datei wird in custom_backup.clp« umbenannt.\n" "Eine bestehende »custom_backup.clp«-Dateien geht somit verloren." #: src/emc/usr_intf/stepconf/stepconf.py:1457 #: src/emc/usr_intf/pncconf/pncconf.py:7815 #: emc/usr_intf/stepconf/stepconf.py:1648 emc/usr_intf/pncconf/pncconf.py:3721 msgid "" "You edited a ladder program and have selected a different program to copy to " "your configuration file.\n" "The edited program will be lost.\n" "\n" "Are you sure? " msgstr "" "Sie haben ein SPS-Programm geändert, aber ein anderes Programm zum " "übernehmen ausgewählt.\n" "Das geänderte Programm geht somit verloren.\n" "\n" "Sind Sie sicher?" #: src/emc/usr_intf/stepconf/stepconf.py:1471 #: emc/usr_intf/stepconf/stepconf.py:1662 emc/usr_intf/pncconf/pncconf.py:2301 msgid "" "OK to replace existing custom pyvcp panel and custom_postgui.hal file ?\n" "Existing custompanel.xml and custom_postgui.hal will be renamed " "custompanel_backup.xml and postgui_backup.hal.\n" "Any existing file named custompanel_backup.xml and custom_postgui.hal will " "be lost. " msgstr "" "OK zum Ersetzen des bestehenden PyVCP-Panel und der benutzerdefinierten " "Datei »custom_postgui.hal«.\n" "Die Dateien »custompanel.xml« und »custom_postgui.hal« werden in " "»custompanel_backup.xml« und »postgui_backup.hal« umbenannt.\n" "Bereits bestehende Dateien »custompanel_backup.xml« and »custom_postgui.hal« " "werden überschrieben." #: src/emc/usr_intf/stepconf/stepconf.py:1676 #: emc/usr_intf/stepconf/stepconf.py:1486 msgid "degree / rev" msgstr "Grad / Umdrehung" #: src/emc/usr_intf/stepconf/stepconf.py:1677 #: src/emc/usr_intf/stepconf/stepconf.py:2205 #: emc/usr_intf/stepconf/stepconf.py:1487 #: emc/usr_intf/stepconf/stepconf.py:2063 msgid "deg / s" msgstr "Grad / s" #: src/emc/usr_intf/stepconf/stepconf.py:1678 #: src/emc/usr_intf/stepconf/stepconf.py:2206 #: emc/usr_intf/stepconf/stepconf.py:1488 #: emc/usr_intf/stepconf/stepconf.py:2064 msgid "deg / s²" msgstr "Grad / s²" #: src/emc/usr_intf/stepconf/stepconf.py:1679 #: src/emc/usr_intf/stepconf/stepconf.py:2207 #: emc/usr_intf/stepconf/stepconf.py:1489 #: emc/usr_intf/stepconf/stepconf.py:2065 msgid "deg" msgstr "Grad" #: src/emc/usr_intf/stepconf/stepconf.py:1680 #: emc/usr_intf/stepconf/stepconf.py:1490 msgid "Steps / deg" msgstr "Schritte / Grad" #: src/emc/usr_intf/stepconf/stepconf.py:1682 #: src/emc/usr_intf/stepconf/stepconf.glade:3589 #: src/emc/usr_intf/pncconf/pncconf.glade:66138 #: src/emc/usr_intf/pncconf/pncconf.glade:66424 #: emc/usr_intf/stepconf/stepconf.py:1492 #: emc/usr_intf/stepconf/stepconf.glade:2534 #: emc/usr_intf/pncconf/pncconf.glade:15473 msgid "mm / rev" msgstr "mm / Umdrehung" #: src/emc/usr_intf/stepconf/stepconf.py:1683 #: src/emc/usr_intf/stepconf/stepconf.py:2219 #: src/emc/usr_intf/stepconf/stepconf.glade:3604 #: src/emc/usr_intf/pncconf/pncconf.glade:57828 #: emc/usr_intf/stepconf/stepconf.py:1493 #: emc/usr_intf/stepconf/stepconf.py:2077 #: emc/usr_intf/stepconf/stepconf.glade:2519 #: emc/usr_intf/pncconf/pncconf.glade:15457 #: emc/usr_intf/pncconf/pncconf.glade:17690 msgid "mm / s" msgstr "mm / s" #: src/emc/usr_intf/stepconf/stepconf.py:1684 #: src/emc/usr_intf/stepconf/stepconf.py:2220 #: src/emc/usr_intf/stepconf/stepconf.glade:3619 #: src/emc/usr_intf/pncconf/pncconf.glade:57813 #: emc/usr_intf/stepconf/stepconf.py:1494 #: emc/usr_intf/stepconf/stepconf.py:2078 #: emc/usr_intf/stepconf/stepconf.glade:2504 #: emc/usr_intf/pncconf/pncconf.glade:15442 #: emc/usr_intf/pncconf/pncconf.glade:17675 msgid "mm / s²" msgstr "mm / s²" #: src/emc/usr_intf/stepconf/stepconf.py:1686 #: src/emc/usr_intf/stepconf/stepconf.glade:3075 #: src/emc/usr_intf/pncconf/pncconf.glade:66888 #: emc/usr_intf/stepconf/stepconf.py:1496 #: emc/usr_intf/stepconf/stepconf.glade:3048 #: emc/usr_intf/pncconf/pncconf.py:3313 #: emc/usr_intf/pncconf/pncconf.glade:16098 #: emc/usr_intf/pncconf/pncconf.glade:18180 msgid "Steps / mm" msgstr "Schritte / mm" #: src/emc/usr_intf/stepconf/stepconf.py:1688 #: emc/usr_intf/stepconf/stepconf.py:1498 msgid "rev / in" msgstr "Umdrehungen / in" #: src/emc/usr_intf/stepconf/stepconf.py:1689 #: src/emc/usr_intf/stepconf/stepconf.py:2233 #: emc/usr_intf/stepconf/stepconf.py:1499 #: emc/usr_intf/stepconf/stepconf.py:2091 msgid "in / s" msgstr "in / s" #: src/emc/usr_intf/stepconf/stepconf.py:1690 #: src/emc/usr_intf/stepconf/stepconf.py:2234 #: emc/usr_intf/stepconf/stepconf.py:1500 #: emc/usr_intf/stepconf/stepconf.py:2092 msgid "in / s²" msgstr "in / s²" #: src/emc/usr_intf/stepconf/stepconf.py:1692 #: emc/usr_intf/stepconf/stepconf.py:1502 msgid "Steps / in" msgstr "Schritte / in" #: src/emc/usr_intf/stepconf/stepconf.py:2202 #: src/emc/usr_intf/pncconf/pncconf.py:8893 #: emc/usr_intf/stepconf/stepconf.py:2060 emc/usr_intf/pncconf/pncconf.py:4425 #, python-format msgid "%s Axis Test" msgstr "Test %s-Achse" #: src/emc/usr_intf/stepconf/stepconf.glade:8 #: src/emc/usr_intf/stepconf/stepconf.glade:21 #: emc/usr_intf/stepconf/stepconf.glade:8 #: emc/usr_intf/stepconf/stepconf.glade:21 msgid "LinuxCNC Stepper Mill Configuration" msgstr "LinuxCNC Maschinenkonfiguration" #: src/emc/usr_intf/stepconf/stepconf.glade:22 #, fuzzy msgid "" "This program creates configuration files (.ini and .hal) for \"step and " "direction\" milling machines and lathes connected to the PC parallel port.\n" "\n" "Stepconf requires a minimum 800 X 600 display resolution.\n" "You may need to collapse the 'Driver Timing Settings' and \n" "Parallel Port Settings' expanders." msgstr "" "Dieses Programm erstellt Konfigurationsdateien (.ini und .hal) für Fräs- und " "Drehmaschinen mit »Schritt- und Richtung«-Schnittstelle, die über den " "Druckeranschluss mit dem PC verbunden sind." #: src/emc/usr_intf/stepconf/stepconf.glade:51 #: emc/usr_intf/stepconf/stepconf.glade:145 msgid "Create a _new configuration" msgstr "Eine _neune Konfiguration erstellen" #: src/emc/usr_intf/stepconf/stepconf.glade:69 #: src/emc/usr_intf/pncconf/pncconf.glade:70 #: emc/usr_intf/stepconf/stepconf.glade:127 #: emc/usr_intf/pncconf/pncconf.glade:129 #, fuzzy msgid "Modify a configuration already created with this program" msgstr "" "Eine bestehende, mit diesem Programm erstellte, Konfiguration _bearbeiten" #: src/emc/usr_intf/stepconf/stepconf.glade:87 #: src/emc/usr_intf/pncconf/pncconf.glade:88 #: emc/usr_intf/stepconf/stepconf.glade:115 #: emc/usr_intf/pncconf/pncconf.glade:117 msgid "Do you wish to:" msgstr "Folgende Optionen stehen zur Verfügung:" #: src/emc/usr_intf/stepconf/stepconf.glade:99 #: src/emc/usr_intf/pncconf/pncconf.glade:100 #: emc/usr_intf/stepconf/stepconf.glade:98 #: emc/usr_intf/pncconf/pncconf.glade:99 msgid "" "If you have made modifications to this configuration outside this program, " "they will be lost when you select \"Modify a configuration\"" msgstr "" "Wenn die Konfiguration mit einem anderen Programm bearbeitet wurde, gehen " "diese Änderungen verloren." #: src/emc/usr_intf/stepconf/stepconf.glade:116 #: emc/usr_intf/stepconf/stepconf.glade:81 msgid "Create a desktop _shortcut (symlink) to configuration files." msgstr "Verknüpfung zu den _Konfigurationsdateien auf dem Destop erstellen" #: src/emc/usr_intf/stepconf/stepconf.glade:133 #: emc/usr_intf/stepconf/stepconf.glade:64 msgid "Create a desktop _launcher to start LinuxCNC with this configuration." msgstr "" "Verknüpfung zum _Starten vom LinuxCNC mit dieser Konfiguration auf dem " "Destop erstellen" #: src/emc/usr_intf/stepconf/stepconf.glade:169 #: src/emc/usr_intf/pncconf/pncconf.glade:175 #: emc/usr_intf/stepconf/stepconf.glade:170 #: emc/usr_intf/pncconf/pncconf.glade:174 msgid "Basic machine information" msgstr "Grundlegende Informationen" #: src/emc/usr_intf/stepconf/stepconf.glade:327 #: emc/usr_intf/stepconf/stepconf.glade:873 msgid "Step _Time:" msgstr "_Länge eines Schritts:" #: src/emc/usr_intf/stepconf/stepconf.glade:356 #: src/emc/usr_intf/stepconf/stepconf.glade:402 #: src/emc/usr_intf/stepconf/stepconf.glade:449 #: src/emc/usr_intf/stepconf/stepconf.glade:494 #: src/emc/usr_intf/stepconf/stepconf.glade:909 #: src/emc/usr_intf/pncconf/pncconf.glade:458 #: src/emc/usr_intf/pncconf/pncconf.glade:8256 #: emc/usr_intf/stepconf/stepconf.glade:475 #: emc/usr_intf/stepconf/stepconf.glade:768 #: emc/usr_intf/stepconf/stepconf.glade:783 #: emc/usr_intf/stepconf/stepconf.glade:798 #: emc/usr_intf/stepconf/stepconf.glade:813 #: emc/usr_intf/pncconf/pncconf.glade:492 #: emc/usr_intf/pncconf/pncconf.glade:1878 msgid "ns" msgstr "ns" #: src/emc/usr_intf/stepconf/stepconf.glade:369 #: emc/usr_intf/stepconf/stepconf.glade:858 msgid "Step _Space:" msgstr "Zeit zwischen zwei _Schritten:" #: src/emc/usr_intf/stepconf/stepconf.glade:417 #: emc/usr_intf/stepconf/stepconf.glade:843 msgid "Direction _Hold:" msgstr "Zeit zwischen Schritt und _Richtungswechsel:" #: src/emc/usr_intf/stepconf/stepconf.glade:464 #: emc/usr_intf/stepconf/stepconf.glade:828 msgid "_Direction Setup:" msgstr "Zeit zwischen Richtungs_wechsel und Schritt:" #: src/emc/usr_intf/stepconf/stepconf.glade:512 msgid "Driver Timing Settings" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.glade:538 #: emc/usr_intf/stepconf/stepconf.glade:649 msgid "First Parport _Base Address:" msgstr "Adresse der ersten _parallelen Schnittstelle:" #: src/emc/usr_intf/stepconf/stepconf.glade:564 msgid " Out" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.glade:575 #: src/emc/usr_intf/stepconf/stepconf.glade:591 msgid "" "Out\n" "In" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.glade:633 #: emc/usr_intf/stepconf/stepconf.glade:458 msgid "S_econd Parport Address:" msgstr "Adresse der z_weiten parallellen Schnittstelle:" #: src/emc/usr_intf/stepconf/stepconf.glade:650 #: emc/usr_intf/stepconf/stepconf.glade:442 msgid "T_hird Parport Address:" msgstr "Adresse der dr_itten parallellen Schnittstelle:" #: src/emc/usr_intf/stepconf/stepconf.glade:667 #, fuzzy msgid " Parallel Port Settings" msgstr "Konfiguration der Druckerschnittstelle" #: src/emc/usr_intf/stepconf/stepconf.glade:684 #: emc/usr_intf/stepconf/stepconf.glade:929 msgid "" "_Test Base\n" "Period Jitter " msgstr "" "Systemtakt-Abweichung\n" "(Jitter) er_mitteln" #: src/emc/usr_intf/stepconf/stepconf.glade:703 #: emc/usr_intf/stepconf/stepconf.glade:916 msgid "Machine _Name:" msgstr "Maschinen_name:" #: src/emc/usr_intf/stepconf/stepconf.glade:716 #: emc/usr_intf/stepconf/stepconf.glade:902 msgid "_Axis configuration:" msgstr "A_chsen:" #: src/emc/usr_intf/stepconf/stepconf.glade:730 #: emc/usr_intf/stepconf/stepconf.glade:888 msgid "Machine _units:" msgstr "_Einheiten:" #: src/emc/usr_intf/stepconf/stepconf.glade:744 #: src/emc/usr_intf/pncconf/pncconf.glade:246 #: emc/usr_intf/stepconf/stepconf.glade:755 #: emc/usr_intf/pncconf/pncconf.glade:244 msgid "Configuration directory:" msgstr "Verzeichnis:" #: src/emc/usr_intf/stepconf/stepconf.glade:757 #: emc/usr_intf/stepconf/stepconf.glade:741 msgid "D_river type:" msgstr "En_dstufe:" #: src/emc/usr_intf/stepconf/stepconf.glade:785 #: src/emc/usr_intf/pncconf/pncconf.glade:326 #: emc/usr_intf/stepconf/stepconf.glade:710 #: emc/usr_intf/pncconf/pncconf.glade:324 msgid "" "Inch\n" "Millimeter" msgstr "" "Inch\n" "Millimeter" #: src/emc/usr_intf/stepconf/stepconf.glade:800 #: src/emc/usr_intf/pncconf/pncconf.glade:291 #: emc/usr_intf/stepconf/stepconf.glade:694 #: emc/usr_intf/pncconf/pncconf.glade:289 msgid "" "XYZ\n" "XYZA\n" "XZ (Lathe)" msgstr "" "XYZ\n" "XYZA\n" "XZ (Drehmaschine)" #: src/emc/usr_intf/stepconf/stepconf.glade:847 #, fuzzy msgid "" "Driver characteristics: (Multiply by 1000 for times specified in µs or " "microseconds)\n" " Additional signal conditioning or isolation such as optocouplers " "and RC filters\n" " can impose timing constraints of their own, in addition to those of " "the driver." msgstr "" "Einstellungen für Endstufe (alle Zeiten in Nanosekunden = 10^-9 s):\n" "Zusätzliche Signalverarbeitungsbausteine oder Maßnahmen zur galvanischen \n" "Trennung, wie Optokoppler oder RC-Filter, können zusätzliche Zeit benötigen." #: src/emc/usr_intf/stepconf/stepconf.glade:875 #: emc/usr_intf/stepconf/stepconf.glade:508 msgid "Base Period Maximum _Jitter:" msgstr "Maximale Systemtakt-Abweichung (_Jitter):" #: src/emc/usr_intf/stepconf/stepconf.glade:924 #: emc/usr_intf/stepconf/stepconf.glade:344 msgid "Max step rate:" msgstr "Max. Schrittfrequenz:" #: src/emc/usr_intf/stepconf/stepconf.glade:940 #: emc/usr_intf/stepconf/stepconf.glade:328 msgid "Min Base Period:" msgstr "Min. Systemtakt:" #: src/emc/usr_intf/stepconf/stepconf.glade:956 #: emc/usr_intf/stepconf/stepconf.glade:311 msgid "" "_Onscreen prompt for\n" "tool change" msgstr "_Bildschirmmitteilung bei Werkzeugwechsel" #: src/emc/usr_intf/stepconf/stepconf.glade:1015 #: emc/usr_intf/stepconf/stepconf.glade:3332 msgid "Advanced Configuration Options" msgstr "Erweiterte Konfiguration" #: src/emc/usr_intf/stepconf/stepconf.glade:1033 #: emc/usr_intf/stepconf/stepconf.glade:3348 #, fuzzy msgid "Include Halui user interface component" msgstr "HalUI-Benutzerschnittstelle einbinden" #: src/emc/usr_intf/stepconf/stepconf.glade:1074 #: src/emc/usr_intf/pncconf/pncconf.glade:6745 #: emc/usr_intf/stepconf/stepconf.glade:3405 #: emc/usr_intf/pncconf/pncconf.glade:1248 msgid "Blank program" msgstr "Leeres Programm" #: src/emc/usr_intf/stepconf/stepconf.glade:1089 #: src/emc/usr_intf/pncconf/pncconf.glade:6760 #, fuzzy msgid "Spindle speed display " msgstr "Spindel-Drehzahl- / Werkzeug-Positions-Anzeige" #: src/emc/usr_intf/stepconf/stepconf.glade:1105 #: src/emc/usr_intf/stepconf/stepconf.glade:1543 #: src/emc/usr_intf/pncconf/pncconf.glade:6791 #: src/emc/usr_intf/pncconf/pncconf.glade:7112 #: src/emc/usr_intf/pncconf/pncconf.glade:59393 #: emc/usr_intf/stepconf/stepconf.glade:3436 #: emc/usr_intf/stepconf/stepconf.glade:3824 #: emc/usr_intf/pncconf/pncconf.glade:1295 #: emc/usr_intf/pncconf/pncconf.glade:19169 msgid "Existing custom program" msgstr "Bestehendes benutzerdefiniertes Programm" #: src/emc/usr_intf/stepconf/stepconf.glade:1120 #: src/emc/usr_intf/stepconf/stepconf.glade:1559 #: src/emc/usr_intf/pncconf/pncconf.glade:6806 #: src/emc/usr_intf/pncconf/pncconf.glade:59409 #: emc/usr_intf/stepconf/stepconf.glade:3451 #: emc/usr_intf/stepconf/stepconf.glade:3840 #: emc/usr_intf/pncconf/pncconf.glade:1310 #: emc/usr_intf/pncconf/pncconf.glade:19185 msgid "Include connections to HAL" msgstr "Verbindungen zum HAL zulassen" #: src/emc/usr_intf/stepconf/stepconf.glade:1154 #: src/emc/usr_intf/pncconf/pncconf.glade:6989 #: src/emc/usr_intf/pncconf/pncconf.glade:7537 #: emc/usr_intf/stepconf/stepconf.glade:3485 #: emc/usr_intf/pncconf/pncconf.glade:1490 #, fuzzy msgid "" "_Display\n" "sample\n" "panel" msgstr "Beispiel-Panelanzeigen" #: src/emc/usr_intf/stepconf/stepconf.glade:1188 #: src/emc/usr_intf/pncconf/pncconf.glade:7048 #: emc/usr_intf/stepconf/stepconf.glade:3363 #: emc/usr_intf/pncconf/pncconf.glade:1526 msgid "Include custom PyVCP GUI panel" msgstr "Benutzerdefiniertes PyVCP-Panel einbinden" #: src/emc/usr_intf/stepconf/stepconf.glade:1321 #: src/emc/usr_intf/pncconf/pncconf.glade:59199 #: emc/usr_intf/stepconf/stepconf.glade:3659 #: emc/usr_intf/pncconf/pncconf.glade:19004 #, fuzzy msgid " Number of analog (float) out pins:" msgstr "Analoge Ausgänge (float):" #: src/emc/usr_intf/stepconf/stepconf.glade:1335 #: src/emc/usr_intf/pncconf/pncconf.glade:59184 #: emc/usr_intf/stepconf/stepconf.glade:3644 #: emc/usr_intf/pncconf/pncconf.glade:18989 #, fuzzy msgid " Number of analog (float) in pins:" msgstr "Analoge Eingänge (float):" #: src/emc/usr_intf/stepconf/stepconf.glade:1349 #: src/emc/usr_intf/pncconf/pncconf.glade:59169 #: emc/usr_intf/stepconf/stepconf.glade:3629 #: emc/usr_intf/pncconf/pncconf.glade:18974 #, fuzzy msgid " Number of analog (s32) out pins:" msgstr "Analoge Ausgänge (s32):" #: src/emc/usr_intf/stepconf/stepconf.glade:1363 #: src/emc/usr_intf/pncconf/pncconf.glade:59153 #: emc/usr_intf/stepconf/stepconf.glade:3613 #: emc/usr_intf/pncconf/pncconf.glade:18958 #, fuzzy msgid " Number of analog (s32) in pins:" msgstr "Analoge Eingänge (s32):" #: src/emc/usr_intf/stepconf/stepconf.glade:1378 #: emc/usr_intf/stepconf/stepconf.glade:3598 #: emc/usr_intf/pncconf/pncconf.glade:18943 #, fuzzy msgid "Number of digital out pins:" msgstr "Digitale Ausgänge:" #: src/emc/usr_intf/stepconf/stepconf.glade:1403 #: emc/usr_intf/stepconf/stepconf.glade:3587 #: emc/usr_intf/pncconf/pncconf.glade:18932 msgid "Number of digital in pins:" msgstr "Digitale Eingänge:" #: src/emc/usr_intf/stepconf/stepconf.glade:1414 #, fuzzy msgid "setup number of external pins" msgstr "Digitale Eingänge:" #: src/emc/usr_intf/stepconf/stepconf.glade:1429 #: src/emc/usr_intf/pncconf/pncconf.glade:59213 #: emc/usr_intf/stepconf/stepconf.glade:3673 #: emc/usr_intf/pncconf/pncconf.glade:19018 msgid "Include modbus master support" msgstr "Modbus-Master-Unterstützung einbinden" #: src/emc/usr_intf/stepconf/stepconf.glade:1500 #: src/emc/usr_intf/pncconf/pncconf.glade:59333 #: emc/usr_intf/stepconf/stepconf.glade:3781 #: emc/usr_intf/pncconf/pncconf.glade:19126 msgid "Blank ladder program" msgstr "Leeres Programm" #: src/emc/usr_intf/stepconf/stepconf.glade:1513 #: src/emc/usr_intf/pncconf/pncconf.glade:59346 #: emc/usr_intf/stepconf/stepconf.glade:3794 #: emc/usr_intf/pncconf/pncconf.glade:19139 msgid "Estop ladder program" msgstr "Notaus-Programm" #: src/emc/usr_intf/stepconf/stepconf.glade:1527 #: src/emc/usr_intf/pncconf/pncconf.glade:59377 #: emc/usr_intf/stepconf/stepconf.glade:3808 #: emc/usr_intf/pncconf/pncconf.glade:19153 msgid "Serial modbus program" msgstr "Serielles Modbus-Programm" #: src/emc/usr_intf/stepconf/stepconf.glade:1592 #: src/emc/usr_intf/pncconf/pncconf.glade:59443 #: emc/usr_intf/stepconf/stepconf.glade:3873 #: emc/usr_intf/pncconf/pncconf.glade:19219 #, fuzzy msgid "" "Edit ladder\n" "program" msgstr "SPS-Programm bearbeiten" #: src/emc/usr_intf/stepconf/stepconf.glade:1628 #: src/emc/usr_intf/pncconf/pncconf.glade:59479 #: emc/usr_intf/stepconf/stepconf.glade:3537 #: emc/usr_intf/pncconf/pncconf.glade:19255 #, fuzzy msgid "Include _Classicladder PLC" msgstr "SPS (Classicladder) einbinden" #: src/emc/usr_intf/stepconf/stepconf.glade:1653 #: emc/usr_intf/stepconf/stepconf.glade:958 msgid "Parallel Port Setup" msgstr "Konfiguration der Druckerschnittstelle" #: src/emc/usr_intf/stepconf/stepconf.glade:1760 #: src/emc/usr_intf/pncconf/pncconf.glade:54010 #: emc/usr_intf/stepconf/stepconf.glade:2306 #: emc/usr_intf/pncconf/pncconf.glade:14617 msgid "Pin _1:" msgstr "Pin _1:" #: src/emc/usr_intf/stepconf/stepconf.glade:1774 #: src/emc/usr_intf/pncconf/pncconf.glade:54024 #: src/emc/usr_intf/pncconf/pncconf.glade:55239 #: emc/usr_intf/stepconf/stepconf.glade:2292 #: emc/usr_intf/pncconf/pncconf.glade:13387 #: emc/usr_intf/pncconf/pncconf.glade:14603 msgid "Pin _2:" msgstr "Pin _2:" #: src/emc/usr_intf/stepconf/stepconf.glade:1788 #: src/emc/usr_intf/pncconf/pncconf.glade:54038 #: src/emc/usr_intf/pncconf/pncconf.glade:55256 #: emc/usr_intf/stepconf/stepconf.glade:2278 #: emc/usr_intf/pncconf/pncconf.glade:13370 #: emc/usr_intf/pncconf/pncconf.glade:14589 msgid "Pin _3:" msgstr "Pin _3:" #: src/emc/usr_intf/stepconf/stepconf.glade:1802 #: src/emc/usr_intf/pncconf/pncconf.glade:54052 #: src/emc/usr_intf/pncconf/pncconf.glade:55273 #: emc/usr_intf/stepconf/stepconf.glade:2264 #: emc/usr_intf/pncconf/pncconf.glade:13353 #: emc/usr_intf/pncconf/pncconf.glade:14575 msgid "Pin _4:" msgstr "Pin _4:" #: src/emc/usr_intf/stepconf/stepconf.glade:1816 #: src/emc/usr_intf/pncconf/pncconf.glade:54066 #: src/emc/usr_intf/pncconf/pncconf.glade:55290 #: emc/usr_intf/stepconf/stepconf.glade:2250 #: emc/usr_intf/pncconf/pncconf.glade:13336 #: emc/usr_intf/pncconf/pncconf.glade:14561 msgid "Pin _5:" msgstr "Pin _5:" #: src/emc/usr_intf/stepconf/stepconf.glade:1830 #: src/emc/usr_intf/pncconf/pncconf.glade:54080 #: src/emc/usr_intf/pncconf/pncconf.glade:55307 #: emc/usr_intf/stepconf/stepconf.glade:2236 #: emc/usr_intf/pncconf/pncconf.glade:13319 #: emc/usr_intf/pncconf/pncconf.glade:14547 msgid "Pin _6:" msgstr "Pin _6:" #: src/emc/usr_intf/stepconf/stepconf.glade:1844 #: src/emc/usr_intf/pncconf/pncconf.glade:54094 #: src/emc/usr_intf/pncconf/pncconf.glade:55324 #: emc/usr_intf/stepconf/stepconf.glade:2222 #: emc/usr_intf/pncconf/pncconf.glade:13302 #: emc/usr_intf/pncconf/pncconf.glade:14533 msgid "Pin _7:" msgstr "Pin _7:" #: src/emc/usr_intf/stepconf/stepconf.glade:1858 #: src/emc/usr_intf/pncconf/pncconf.glade:54108 #: src/emc/usr_intf/pncconf/pncconf.glade:55341 #: emc/usr_intf/stepconf/stepconf.glade:2208 #: emc/usr_intf/pncconf/pncconf.glade:13285 #: emc/usr_intf/pncconf/pncconf.glade:14519 msgid "Pin _8:" msgstr "Pin _8:" #: src/emc/usr_intf/stepconf/stepconf.glade:1872 #: src/emc/usr_intf/pncconf/pncconf.glade:54122 #: src/emc/usr_intf/pncconf/pncconf.glade:55358 #: emc/usr_intf/stepconf/stepconf.glade:2194 #: emc/usr_intf/pncconf/pncconf.glade:13268 #: emc/usr_intf/pncconf/pncconf.glade:14505 msgid "Pin _9:" msgstr "Pin _9:" #: src/emc/usr_intf/stepconf/stepconf.glade:1886 #: src/emc/usr_intf/pncconf/pncconf.glade:54136 #: emc/usr_intf/stepconf/stepconf.glade:2180 #: emc/usr_intf/pncconf/pncconf.glade:14491 msgid "_Pin 14:" msgstr "_Pin 14:" #: src/emc/usr_intf/stepconf/stepconf.glade:1900 #: src/emc/usr_intf/pncconf/pncconf.glade:54150 #: emc/usr_intf/stepconf/stepconf.glade:2166 #: emc/usr_intf/pncconf/pncconf.glade:14477 msgid "P_in 16:" msgstr "P_in 16:" #: src/emc/usr_intf/stepconf/stepconf.glade:1914 #: src/emc/usr_intf/pncconf/pncconf.glade:54164 #: emc/usr_intf/stepconf/stepconf.glade:2152 #: emc/usr_intf/pncconf/pncconf.glade:14463 msgid "Pi_n 17:" msgstr "Pi_n 17:" #: src/emc/usr_intf/stepconf/stepconf.glade:2258 #: emc/usr_intf/stepconf/stepconf.glade:1810 msgid "Outputs (PC to Mill):" msgstr "Ausgänge (vom PC zur Maschine)" #: src/emc/usr_intf/stepconf/stepconf.glade:2270 #: src/emc/usr_intf/pncconf/pncconf.glade:55222 #: emc/usr_intf/stepconf/stepconf.glade:1794 #: emc/usr_intf/pncconf/pncconf.glade:13403 msgid "Pin 1_0:" msgstr "Pin 1_0:" #: src/emc/usr_intf/stepconf/stepconf.glade:2286 #: src/emc/usr_intf/pncconf/pncconf.glade:55206 #: emc/usr_intf/stepconf/stepconf.glade:1778 #: emc/usr_intf/pncconf/pncconf.glade:13419 msgid "Pin 1_1:" msgstr "Pin 1_1:" #: src/emc/usr_intf/stepconf/stepconf.glade:2302 #: src/emc/usr_intf/pncconf/pncconf.glade:55190 #: emc/usr_intf/stepconf/stepconf.glade:1762 #: emc/usr_intf/pncconf/pncconf.glade:13435 msgid "Pin 1_2:" msgstr "Pin 1_2:" #: src/emc/usr_intf/stepconf/stepconf.glade:2318 #: src/emc/usr_intf/pncconf/pncconf.glade:55174 #: emc/usr_intf/stepconf/stepconf.glade:1746 #: emc/usr_intf/pncconf/pncconf.glade:13451 msgid "Pin 1_3:" msgstr "Pin 1_3:" #: src/emc/usr_intf/stepconf/stepconf.glade:2334 #: src/emc/usr_intf/pncconf/pncconf.glade:55158 #: emc/usr_intf/stepconf/stepconf.glade:1730 #: emc/usr_intf/pncconf/pncconf.glade:13467 msgid "Pin 1_5:" msgstr "Pin 1_5:" #: src/emc/usr_intf/stepconf/stepconf.glade:2399 #: emc/usr_intf/stepconf/stepconf.glade:1668 msgid "Inputs (Mill to PC):" msgstr "Eingänge (von der Maschine zum PC)" #: src/emc/usr_intf/stepconf/stepconf.glade:2425 #: src/emc/usr_intf/stepconf/stepconf.glade:2438 #: src/emc/usr_intf/pncconf/pncconf.glade:54578 #: src/emc/usr_intf/pncconf/pncconf.glade:54591 #: emc/usr_intf/stepconf/stepconf.glade:1629 #: emc/usr_intf/stepconf/stepconf.glade:1642 #: emc/usr_intf/pncconf/pncconf.glade:14037 #: emc/usr_intf/pncconf/pncconf.glade:14050 msgid "Invert" msgstr "Invertieren" #: src/emc/usr_intf/stepconf/stepconf.glade:2887 #: emc/usr_intf/stepconf/stepconf.glade:1175 msgid "_Sherline Outputs" msgstr "_Sherline" #: src/emc/usr_intf/stepconf/stepconf.glade:2905 #: emc/usr_intf/stepconf/stepconf.glade:1157 msgid "_Xylotex Outputs" msgstr "_Xylotex" #: src/emc/usr_intf/stepconf/stepconf.glade:2923 #: emc/usr_intf/stepconf/stepconf.glade:1142 msgid "Output pinout presets:" msgstr "Vordefinierte Ausgangskonfigurationen:" #: src/emc/usr_intf/stepconf/stepconf.glade:3022 #: src/emc/usr_intf/pncconf/pncconf.glade:57970 #: emc/usr_intf/stepconf/stepconf.glade:2327 #: emc/usr_intf/pncconf/pncconf.glade:16236 msgid "X Axis Configuration" msgstr "Konfiguration der X-Achse" #: src/emc/usr_intf/stepconf/stepconf.glade:3090 #: emc/usr_intf/stepconf/stepconf.glade:3035 msgid "_Motor steps per revolution:" msgstr "_Motorschritte pro Umdrehung:" #: src/emc/usr_intf/stepconf/stepconf.glade:3103 #: emc/usr_intf/stepconf/stepconf.glade:3020 msgid "_Driver Microstepping:" msgstr "M_ikroschritte (Vollschritt:1, Halbschritt:2, usw.):" #: src/emc/usr_intf/stepconf/stepconf.glade:3118 #: emc/usr_intf/stepconf/stepconf.glade:3005 #: emc/usr_intf/pncconf/pncconf.glade:15632 #: emc/usr_intf/pncconf/pncconf.glade:17813 msgid "_Pulley teeth (Motor:Leadscrew):" msgstr "_Untersetzung (Zähnezahl am Motor:Spindel):" #: src/emc/usr_intf/stepconf/stepconf.glade:3133 #: emc/usr_intf/stepconf/stepconf.glade:2990 #: emc/usr_intf/pncconf/pncconf.glade:15568 msgid "_Leadscrew Pitch:" msgstr "_Spindelsteigung:" #: src/emc/usr_intf/stepconf/stepconf.glade:3148 #: src/emc/usr_intf/pncconf/pncconf.glade:57858 #: emc/usr_intf/stepconf/stepconf.glade:2975 #: emc/usr_intf/pncconf/pncconf.glade:15553 #: emc/usr_intf/pncconf/pncconf.glade:17751 msgid "Maximum _Velocity:" msgstr "Maximale _Geschwindigkeit" #: src/emc/usr_intf/stepconf/stepconf.glade:3163 #: src/emc/usr_intf/pncconf/pncconf.glade:57843 #: emc/usr_intf/stepconf/stepconf.glade:2960 #: emc/usr_intf/pncconf/pncconf.glade:15538 #: emc/usr_intf/pncconf/pncconf.glade:17736 msgid "Maximum _Acceleration:" msgstr "Maximale Bes_chleunigung" #: src/emc/usr_intf/stepconf/stepconf.glade:3178 #: src/emc/usr_intf/pncconf/pncconf.glade:67063 #: emc/usr_intf/stepconf/stepconf.glade:2945 #: emc/usr_intf/pncconf/pncconf.glade:16083 #: emc/usr_intf/pncconf/pncconf.glade:18165 msgid "Time to accelerate to max speed:" msgstr "Zeit bis zum erreichend der maximalen Geschwindigkeit:" #: src/emc/usr_intf/stepconf/stepconf.glade:3193 #: emc/usr_intf/stepconf/stepconf.glade:2930 msgid "Distance to accelerate to max speed:" msgstr "Weg bis zum erreichend der maximalen Geschwindigkeit:" #: src/emc/usr_intf/stepconf/stepconf.glade:3292 #: src/emc/usr_intf/pncconf/pncconf.glade:67036 #: emc/usr_intf/stepconf/stepconf.glade:2833 #: emc/usr_intf/pncconf/pncconf.glade:16055 #: emc/usr_intf/pncconf/pncconf.glade:18152 msgid "Pulse rate at max speed:" msgstr "Schrittfrequenz bei maximaler Geschwindigkeit:" #: src/emc/usr_intf/stepconf/stepconf.glade:3362 #: emc/usr_intf/stepconf/stepconf.glade:2761 msgid "_Home location:" msgstr "_Referenzpunkt:" #: src/emc/usr_intf/stepconf/stepconf.glade:3377 #: emc/usr_intf/stepconf/stepconf.glade:2746 msgid "Home _Switch location:" msgstr "Re_ferenzschalter:" #: src/emc/usr_intf/stepconf/stepconf.glade:3392 #: emc/usr_intf/stepconf/stepconf.glade:2731 msgid "Home Sear_ch velocity:" msgstr "Gesch_windigkeit Referenzfahrt:" #: src/emc/usr_intf/stepconf/stepconf.glade:3407 #: emc/usr_intf/stepconf/stepconf.glade:2717 msgid "Home La_tch direction:" msgstr "Ric_htung beim Übernehmen des Referenzpunkt:" #: src/emc/usr_intf/stepconf/stepconf.glade:3420 #: src/emc/usr_intf/pncconf/pncconf.glade:66232 #: src/emc/usr_intf/pncconf/pncconf.glade:66274 #: src/emc/usr_intf/pncconf/pncconf.glade:66505 #: src/emc/usr_intf/pncconf/pncconf.glade:66570 #: emc/usr_intf/stepconf/stepconf.glade:2699 #: emc/usr_intf/pncconf/pncconf.glade:15598 #: emc/usr_intf/pncconf/pncconf.glade:17780 msgid "_:" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.glade:3437 #: src/emc/usr_intf/pncconf/pncconf.glade:58536 #: emc/usr_intf/stepconf/stepconf.glade:2684 #: emc/usr_intf/pncconf/pncconf.glade:16658 msgid "" "Same\n" "Opposite" msgstr "" "Gleiche Richtung\n" "Entgegengesetzte Richtung" #: src/emc/usr_intf/stepconf/stepconf.glade:3492 #: emc/usr_intf/stepconf/stepconf.glade:2631 msgid "Tab_le travel:" msgstr "V_erfahrweg:" #: src/emc/usr_intf/stepconf/stepconf.glade:3519 #: emc/usr_intf/stepconf/stepconf.glade:2600 msgid "t_o" msgstr "_bis" #: src/emc/usr_intf/stepconf/stepconf.glade:3649 #: emc/usr_intf/stepconf/stepconf.glade:2474 msgid "s" msgstr "s" #: src/emc/usr_intf/stepconf/stepconf.glade:3703 #: emc/usr_intf/stepconf/stepconf.glade:2433 msgid "T_est this axis" msgstr "Achse _testen" #: src/emc/usr_intf/stepconf/stepconf.glade:3729 #: emc/usr_intf/stepconf/stepconf.glade:2396 #: emc/usr_intf/pncconf/pncconf.glade:15940 #: emc/usr_intf/pncconf/pncconf.glade:18071 msgid "Axis SCALE:" msgstr "Maßstab der Achse:" #: src/emc/usr_intf/stepconf/stepconf.glade:3765 #: emc/usr_intf/stepconf/stepconf.glade:3070 #: emc/usr_intf/pncconf/pncconf.glade:16881 msgid "Spindle Configuration" msgstr "Konfiguration der Spindel" #: src/emc/usr_intf/stepconf/stepconf.glade:3785 #, fuzzy msgid "Use spindle-at-speed:" msgstr "Spindelübersteuerung:" #: src/emc/usr_intf/stepconf/stepconf.glade:3841 msgid "Speed display filter gain:" msgstr "" #: src/emc/usr_intf/stepconf/stepconf.glade:3870 #: emc/usr_intf/stepconf/stepconf.glade:3312 msgid "Calibration:" msgstr "Kalibrierung:" #: src/emc/usr_intf/stepconf/stepconf.glade:3883 #: emc/usr_intf/stepconf/stepconf.glade:3297 msgid "_Speed 1:" msgstr "_Drehzahl 1:" #: src/emc/usr_intf/stepconf/stepconf.glade:3898 #: emc/usr_intf/stepconf/stepconf.glade:3279 msgid "_PWM 1:" msgstr "entspricht _PWM 1:" #: src/emc/usr_intf/stepconf/stepconf.glade:3916 #: emc/usr_intf/stepconf/stepconf.glade:3264 msgid "S_peed 2:" msgstr "D_rehzahl 2:" #: src/emc/usr_intf/stepconf/stepconf.glade:3931 #: emc/usr_intf/stepconf/stepconf.glade:3246 msgid "P_WM 2:" msgstr "entspricht P_WM 2:" #: src/emc/usr_intf/stepconf/stepconf.glade:3949 #: emc/usr_intf/stepconf/stepconf.glade:3233 msgid "PWM _Rate:" msgstr "PWM-_Frequenz:" #: src/emc/usr_intf/stepconf/stepconf.glade:4025 #: emc/usr_intf/stepconf/stepconf.glade:3155 msgid "_Cycles per revolution:" msgstr "Encoder-_Takte pro Spindel-Umdrehung:" #: src/emc/usr_intf/stepconf/stepconf.glade:4079 #: emc/usr_intf/stepconf/stepconf.glade:3103 msgid "Enter 0 Hz for \"PDM\" mode" msgstr "Für PDM 0Hz eingeben" #: src/emc/usr_intf/stepconf/stepconf.glade:4091 #, fuzzy msgid "Scale %" msgstr "Scale" #: src/emc/usr_intf/stepconf/stepconf.glade:4113 #: src/emc/usr_intf/pncconf/pncconf.glade:60002 #: emc/usr_intf/stepconf/stepconf.glade:3934 #: emc/usr_intf/pncconf/pncconf.glade:19851 msgid "Machine configuration complete" msgstr "Maschinenkonfiguration komplett" #: src/emc/usr_intf/stepconf/stepconf.glade:4114 #: src/emc/usr_intf/pncconf/pncconf.glade:60003 #, fuzzy msgid "" "All the necessary information has now been gathered. Click \"Apply\" to " "write your configuration files to disk.\n" "If you experience lockups while running LinuxCNC, you will need to decrease " "the maximum velocity which will have the effect of increasing BASE_PERIOD.\n" "\n" "If you experience lost steps while running LinuxCNC, first verify that you " "entered the proper timings for your stepper drivers. If that does not fix " "the problem, then run a more thorough latency test as described on the " "linuxcnc.org wiki:\n" " http;//wiki.linuxcnc.org/cgi-bin/wiki.pl?TroubleShooting\n" "\n" "If you experience the \"Unexpected Realtime Delay\" message, run a more " "thorough latency test as described on the linuxcnc.org wiki: \n" " http://wiki.linuxcnc.org/cgi-bin/wiki.pl?TroubleShooting" msgstr "" "Alle notwendigen Informationen wurden erfasst. Bestätigen Sie mit »Anwenden«, " "um die Konfiguration zu speichern.\n" "Falls EMC2 nicht mehr reagieren sollte, verkleinern Sie die maximale " "Geschwindigkeit, was die Zeit für einen Systemtakt (BASE_PERIOD) " "vergrößert.\n" "\n" "Falls Sie Schrittverluste bemerken sollten, überprüfen Sie zuerst die " "Zeiteinstellungen für ihre Endstufe. Wird das Problem hierdurch nicht " "behoben, dann führen bitte weiter Maßnahmen durch, wie sie im EMC2-Wiki " "beschrieben werden:\n" " http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TroubleShooting\n" "\n" "Falls Sie die Fehlermeldung »Unexpected Realtime Delay« erhalten, dann führen " "bitte weiter Maßnahmen durch, wie sie im EMC2-Wiki beschrieben werden:\n" " http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TroubleShooting" #: src/emc/usr_intf/stepconf/stepconf.glade:4160 #: src/emc/usr_intf/pncconf/pncconf.glade:60462 #: src/emc/usr_intf/pncconf/pncconf.glade:61557 #: src/emc/usr_intf/pncconf/pncconf.glade:62650 #: src/emc/usr_intf/pncconf/pncconf.glade:63743 #: src/emc/usr_intf/pncconf/pncconf.glade:64842 #: emc/usr_intf/stepconf/stepconf.glade:4233 #: emc/usr_intf/pncconf/pncconf.glade:20325 #: emc/usr_intf/pncconf/pncconf.glade:21348 #: emc/usr_intf/pncconf/pncconf.glade:22048 #: emc/usr_intf/pncconf/pncconf.glade:22748 msgid "Acceleration:" msgstr "Beschleunigung:" #: src/emc/usr_intf/stepconf/stepconf.glade:4174 #: src/emc/usr_intf/pncconf/pncconf.glade:60231 #: src/emc/usr_intf/pncconf/pncconf.glade:60695 #: src/emc/usr_intf/pncconf/pncconf.glade:61788 #: src/emc/usr_intf/pncconf/pncconf.glade:62881 #: src/emc/usr_intf/pncconf/pncconf.glade:63974 #: src/emc/usr_intf/pncconf/pncconf.glade:64954 #: emc/usr_intf/stepconf/stepconf.glade:4219 #: emc/usr_intf/pncconf/pncconf.glade:20058 #: emc/usr_intf/pncconf/pncconf.glade:20339 #: emc/usr_intf/pncconf/pncconf.glade:21362 #: emc/usr_intf/pncconf/pncconf.glade:22062 #: emc/usr_intf/pncconf/pncconf.glade:22762 msgid "Jog:" msgstr "Verfahren:" #: src/emc/usr_intf/stepconf/stepconf.glade:4188 #: src/emc/usr_intf/pncconf/pncconf.glade:60681 #: src/emc/usr_intf/pncconf/pncconf.glade:61774 #: src/emc/usr_intf/pncconf/pncconf.glade:62867 #: src/emc/usr_intf/pncconf/pncconf.glade:63960 #: emc/usr_intf/stepconf/stepconf.glade:4205 #: emc/usr_intf/pncconf/pncconf.glade:20353 #: emc/usr_intf/pncconf/pncconf.glade:21376 #: emc/usr_intf/pncconf/pncconf.glade:22076 #: emc/usr_intf/pncconf/pncconf.glade:22776 msgid "Test Area:" msgstr "Testbereich:" #: src/emc/usr_intf/stepconf/stepconf.glade:4217 #: emc/usr_intf/stepconf/stepconf.glade:4184 msgid "mm/s^2" msgstr "mm/s²" #: src/emc/usr_intf/stepconf/stepconf.glade:4253 #: emc/usr_intf/stepconf/stepconf.glade:4150 msgid "mm/s" msgstr "mm / s" #: src/emc/usr_intf/stepconf/stepconf.glade:4329 #: src/emc/usr_intf/pncconf/pncconf.glade:60620 #: src/emc/usr_intf/pncconf/pncconf.glade:61713 #: src/emc/usr_intf/pncconf/pncconf.glade:62806 #: src/emc/usr_intf/pncconf/pncconf.glade:63899 #: src/emc/usr_intf/pncconf/pncconf.glade:65066 #: emc/usr_intf/stepconf/stepconf.glade:3971 #: emc/usr_intf/pncconf/pncconf.glade:20492 #: emc/usr_intf/pncconf/pncconf.glade:21511 #: emc/usr_intf/pncconf/pncconf.glade:22211 #: emc/usr_intf/pncconf/pncconf.glade:22911 msgid "" "±\n" "+\n" "-\n" msgstr "" "±\n" "+\n" "-\n" #: src/emc/usr_intf/pncconf/pncconf.py:79 emc/usr_intf/pncconf/pncconf.py:54 msgid "" "PNCconf encountered an error. The following information may be useful in " "troubleshooting:\n" "\n" msgstr "" "Beim Ausführen von PNCconf ist ein Fehler aufgetreten. Die folgenden " "Informationen können bei der Behebung hilfreich sein:\n" "\n" #: src/emc/usr_intf/pncconf/pncconf.py:149 msgid "Not Used" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:149 #: src/emc/usr_intf/pncconf/pncconf.py:150 msgid "Dummy" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:150 msgid "8i20 Servo Drive" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:151 #, fuzzy msgid "POT Output" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:151 msgid "POT Enable" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:151 #, fuzzy msgid "POT Direction" msgstr "X Richtung" #: src/emc/usr_intf/pncconf/pncconf.py:152 emc/usr_intf/pncconf/pncconf.py:113 msgid "GPIO Input" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:152 emc/usr_intf/pncconf/pncconf.py:113 msgid "GPIO Output" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:152 emc/usr_intf/pncconf/pncconf.py:113 msgid "GPIO O Drain" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:153 #, fuzzy msgid "Quad Encoder-A" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:153 #, fuzzy msgid "Quad Encoder-B" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:153 #, fuzzy msgid "Quad Encoder-I" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:153 #, fuzzy msgid "Quad Encoder-M" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:154 #, fuzzy msgid "Muxed Encoder 0" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:154 #, fuzzy msgid "Muxed Encoder 1" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:154 msgid "muxed enc" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:154 msgid "mux enc mask" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:154 msgid "mux select" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:155 #, fuzzy msgid "Resolver 0 Encoder" msgstr "Bild invertieren" #: src/emc/usr_intf/pncconf/pncconf.py:155 #, fuzzy msgid "Resolver 1 Encoder" msgstr "Bild invertieren" #: src/emc/usr_intf/pncconf/pncconf.py:155 #, fuzzy msgid "Resolver 2 Encoder" msgstr "Bild invertieren" #: src/emc/usr_intf/pncconf/pncconf.py:156 #, fuzzy msgid "Resolver 3 Encoder" msgstr "Bild invertieren" #: src/emc/usr_intf/pncconf/pncconf.py:156 #, fuzzy msgid "Resolver 4 Encoder" msgstr "Bild invertieren" #: src/emc/usr_intf/pncconf/pncconf.py:156 #, fuzzy msgid "Resolver 5 Encoder" msgstr "Bild invertieren" #: src/emc/usr_intf/pncconf/pncconf.py:157 #, fuzzy msgid "Step Gen-A" msgstr "X Schritt" #: src/emc/usr_intf/pncconf/pncconf.py:157 msgid "Dir Gen-B" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:157 msgid "Step/Dir Gen-C" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:157 msgid "Step/Dir Gen-D" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:158 msgid "Step/Dir Gen-E" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:158 msgid "Step/dir Gen-F" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:159 msgid "Pulse Width Gen-P" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:159 msgid "Pulse Width Gen-D" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:159 msgid "Pulse Width Gen-E" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:160 msgid "Pulse Density Gen-P" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:160 msgid "Pulse Density Gen-D" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:160 msgid "Pulse Density Gen-E" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:161 msgid "Up/Down Mode -Up" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:161 msgid "Up/Down Mode-Down" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:161 msgid "Up/Down Mode-Enable" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:162 msgid "Motor Phase A" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:162 msgid "Motor Phase B" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:162 msgid "Motor Phase C" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:163 msgid "Motor Phase A Not" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:163 msgid "Motor Phase B Not" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:163 msgid "Motor Phase C Not" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:163 msgid "Motor Enable" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:163 msgid "Motor Fault" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:165 msgid "SMARTSERIAL-P0-TX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:166 msgid "SMARTSERIAL-P0-RX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:166 msgid "SMARTSERIAL-P0-EN" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:166 msgid "SMARTSERIAL-P1-TX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:166 msgid "SMARTSERIAL-P1-RX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:166 msgid "SMARTSERIAL-P1-EN" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:167 msgid "SMARTSERIAL-P2-TX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:167 msgid "SMARTSERIAL-P2-RX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:167 msgid "SMARTSERIAL-P2-EN" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:167 msgid "SMARTSERIAL-P3-TX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:167 msgid "SMARTSERIAL-P3-RX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:167 msgid "SMARTSERIAL-P3-EN" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:168 msgid "SMARTSERIAL-P4-TX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:168 msgid "SMARTSERIAL-P4-RX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:168 msgid "SMARTSERIAL-P4-EN" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:168 msgid "SMARTSERIAL-P5-TX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:168 msgid "SMARTSERIAL-P5-RX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:168 msgid "SMARTSERIAL-P5-EN" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:169 msgid "SMARTSERIAL-P6-TX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:169 msgid "SMARTSERIAL-P6-RX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:169 msgid "SMARTSERIAL-P6-EN" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:169 msgid "SMARTSERIAL-P7-TX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:169 msgid "SMARTSERIAL-P7-RX" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:169 msgid "SMARTSERIAL-P7-EN" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:170 msgid "7i76 sserial #1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:170 msgid "7i76 sserial #2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:420 #, fuzzy msgid "Unused Unused" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:442 #, fuzzy msgid "Machine Is Enabled" msgstr "Maschinen_name:" #: src/emc/usr_intf/pncconf/pncconf.py:442 #, fuzzy msgid "X Amplifier Enable" msgstr "Endstufe aktivieren" #: src/emc/usr_intf/pncconf/pncconf.py:442 #, fuzzy msgid "Y Amplifier Enable" msgstr "Endstufe aktivieren" #: src/emc/usr_intf/pncconf/pncconf.py:442 #, fuzzy msgid "Z Amplifier Enable" msgstr "Endstufe aktivieren" #: src/emc/usr_intf/pncconf/pncconf.py:443 #, fuzzy msgid "A Amplifier Enable" msgstr "Endstufe aktivieren" #: src/emc/usr_intf/pncconf/pncconf.py:443 msgid "Force Pin True" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:445 #: src/emc/usr_intf/pncconf/pncconf.py:472 msgid "X HALL 1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:445 #: src/emc/usr_intf/pncconf/pncconf.py:472 msgid "X HALL 2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:445 #: src/emc/usr_intf/pncconf/pncconf.py:472 msgid "X HALL 3" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:445 #: src/emc/usr_intf/pncconf/pncconf.py:472 msgid "X Gray C1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:445 #: src/emc/usr_intf/pncconf/pncconf.py:472 msgid "X Gray C2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:445 #: src/emc/usr_intf/pncconf/pncconf.py:472 msgid "X Gray C4" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:445 #: src/emc/usr_intf/pncconf/pncconf.py:472 msgid "X Gray C8" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:446 #: src/emc/usr_intf/pncconf/pncconf.py:473 msgid "Y HALL 1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:446 #: src/emc/usr_intf/pncconf/pncconf.py:473 msgid "Y HALL 2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:446 #: src/emc/usr_intf/pncconf/pncconf.py:473 msgid "Y HALL 3" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:446 #: src/emc/usr_intf/pncconf/pncconf.py:473 msgid "Y Gray C1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:446 #: src/emc/usr_intf/pncconf/pncconf.py:473 msgid "Y Gray C2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:446 #: src/emc/usr_intf/pncconf/pncconf.py:473 msgid "Y Gray C4" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:446 #: src/emc/usr_intf/pncconf/pncconf.py:473 msgid "Y Gray C8" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:447 #: src/emc/usr_intf/pncconf/pncconf.py:474 msgid "Z HALL 1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:447 #: src/emc/usr_intf/pncconf/pncconf.py:474 msgid "Z HALL 2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:447 #: src/emc/usr_intf/pncconf/pncconf.py:474 msgid "Z HALL 3" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:447 #: src/emc/usr_intf/pncconf/pncconf.py:474 msgid "Z Gray C1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:447 #: src/emc/usr_intf/pncconf/pncconf.py:474 msgid "Z Gray C2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:447 #: src/emc/usr_intf/pncconf/pncconf.py:474 msgid "Z Gray C4" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:447 #: src/emc/usr_intf/pncconf/pncconf.py:474 msgid "Z Gray C8" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:448 #: src/emc/usr_intf/pncconf/pncconf.py:475 msgid "A HALL 1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:448 #: src/emc/usr_intf/pncconf/pncconf.py:475 msgid "A HALL 2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:448 #: src/emc/usr_intf/pncconf/pncconf.py:475 msgid "A HALL 3" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:448 #: src/emc/usr_intf/pncconf/pncconf.py:475 msgid "A Gray C1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:448 #: src/emc/usr_intf/pncconf/pncconf.py:475 msgid "A Gray C2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:448 #: src/emc/usr_intf/pncconf/pncconf.py:475 msgid "A Gray C4" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:448 #: src/emc/usr_intf/pncconf/pncconf.py:475 msgid "A Gray C8" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:449 #: src/emc/usr_intf/pncconf/pncconf.py:476 #, fuzzy msgid "S HALL 1" msgstr "HAL-INI speichern" #: src/emc/usr_intf/pncconf/pncconf.py:449 #: src/emc/usr_intf/pncconf/pncconf.py:476 #, fuzzy msgid "S HALL 2" msgstr "HAL-INI speichern" #: src/emc/usr_intf/pncconf/pncconf.py:449 #: src/emc/usr_intf/pncconf/pncconf.py:476 #, fuzzy msgid "S HALL 3" msgstr "HAL-INI speichern" #: src/emc/usr_intf/pncconf/pncconf.py:449 #: src/emc/usr_intf/pncconf/pncconf.py:476 msgid "S Gray C1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:449 #: src/emc/usr_intf/pncconf/pncconf.py:476 msgid "S Gray C2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:449 #: src/emc/usr_intf/pncconf/pncconf.py:476 msgid "S Gray C4" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:449 #: src/emc/usr_intf/pncconf/pncconf.py:476 msgid "S Gray C8" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:450 emc/usr_intf/pncconf/pncconf.py:236 #, fuzzy msgid "Unused Output" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:450 #: src/emc/usr_intf/pncconf/pncconf.py:480 #: src/emc/usr_intf/pncconf/pncconf.py:593 #, fuzzy msgid "Spindle" msgstr "Spindel:" #: src/emc/usr_intf/pncconf/pncconf.py:450 #, fuzzy msgid "Coolant" msgstr "Kühlung:" #: src/emc/usr_intf/pncconf/pncconf.py:451 #, fuzzy msgid "Control" msgstr "Strg-M" #: src/emc/usr_intf/pncconf/pncconf.py:451 #: src/emc/usr_intf/pncconf/pncconf.py:480 #, fuzzy msgid "Digital" msgstr "Digitaler Eingang 0" #: src/emc/usr_intf/pncconf/pncconf.py:451 #: src/emc/usr_intf/pncconf/pncconf.py:481 #, fuzzy msgid "X BLDC Control" msgstr "Strg-M" #: src/emc/usr_intf/pncconf/pncconf.py:452 #: src/emc/usr_intf/pncconf/pncconf.py:482 #, fuzzy msgid "Y BLDC Control" msgstr "Strg-M" #: src/emc/usr_intf/pncconf/pncconf.py:452 #: src/emc/usr_intf/pncconf/pncconf.py:482 #, fuzzy msgid "Z BLDC Control" msgstr "Strg-M" #: src/emc/usr_intf/pncconf/pncconf.py:452 #: src/emc/usr_intf/pncconf/pncconf.py:482 #, fuzzy msgid "A BLDC Control" msgstr "Strg-M" #: src/emc/usr_intf/pncconf/pncconf.py:453 msgid " S BLDC Control" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:453 #: src/emc/usr_intf/pncconf/pncconf.py:483 #: src/emc/usr_intf/pncconf/pncconf.py:557 #: src/emc/usr_intf/pncconf/pncconf.py:585 #: src/emc/usr_intf/pncconf/pncconf.py:588 #: src/emc/usr_intf/pncconf/pncconf.py:593 #: src/emc/usr_intf/pncconf/pncconf.py:597 #: src/emc/usr_intf/pncconf/pncconf.py:614 #: src/emc/usr_intf/pncconf/pncconf.py:629 #, fuzzy msgid "Custom Signals" msgstr "_Signale" #: src/emc/usr_intf/pncconf/pncconf.py:455 #: src/emc/usr_intf/pncconf/pncconf.py:541 emc/usr_intf/pncconf/pncconf.py:247 #, fuzzy msgid "X Minimum Limit" msgstr "Endschalter Mimimum X" #: src/emc/usr_intf/pncconf/pncconf.py:455 #: src/emc/usr_intf/pncconf/pncconf.py:541 emc/usr_intf/pncconf/pncconf.py:247 #, fuzzy msgid "Y Minimum Limit" msgstr "Endschalter Mimimum X" #: src/emc/usr_intf/pncconf/pncconf.py:455 #: src/emc/usr_intf/pncconf/pncconf.py:542 emc/usr_intf/pncconf/pncconf.py:247 #, fuzzy msgid "Z Minimum Limit" msgstr "Endschalter Mimimum X" #: src/emc/usr_intf/pncconf/pncconf.py:455 #: src/emc/usr_intf/pncconf/pncconf.py:542 emc/usr_intf/pncconf/pncconf.py:247 #, fuzzy msgid "A Minimum Limit" msgstr "Endschalter Mimimum X" #: src/emc/usr_intf/pncconf/pncconf.py:456 #: src/emc/usr_intf/pncconf/pncconf.py:543 emc/usr_intf/pncconf/pncconf.py:248 #, fuzzy msgid "X Maximum Limit" msgstr "Endschalter Maximum X" #: src/emc/usr_intf/pncconf/pncconf.py:456 #: src/emc/usr_intf/pncconf/pncconf.py:543 emc/usr_intf/pncconf/pncconf.py:248 #, fuzzy msgid "Y Maximum Limit" msgstr "Endschalter Maximum X" #: src/emc/usr_intf/pncconf/pncconf.py:456 #: src/emc/usr_intf/pncconf/pncconf.py:544 emc/usr_intf/pncconf/pncconf.py:248 #, fuzzy msgid "Z Maximum Limit" msgstr "Endschalter Maximum X" #: src/emc/usr_intf/pncconf/pncconf.py:456 #: src/emc/usr_intf/pncconf/pncconf.py:544 emc/usr_intf/pncconf/pncconf.py:248 #, fuzzy msgid "A Maximum Limit" msgstr "Endschalter Maximum X" #: src/emc/usr_intf/pncconf/pncconf.py:457 #: src/emc/usr_intf/pncconf/pncconf.py:545 emc/usr_intf/pncconf/pncconf.py:249 #, fuzzy msgid "X Both Limit" msgstr "Beide Endschalter X" #: src/emc/usr_intf/pncconf/pncconf.py:457 #: src/emc/usr_intf/pncconf/pncconf.py:545 emc/usr_intf/pncconf/pncconf.py:249 #, fuzzy msgid "Y Both Limit" msgstr "Beide Endschalter X" #: src/emc/usr_intf/pncconf/pncconf.py:457 #: src/emc/usr_intf/pncconf/pncconf.py:546 emc/usr_intf/pncconf/pncconf.py:249 #, fuzzy msgid "Z Both Limit" msgstr "Beide Endschalter X" #: src/emc/usr_intf/pncconf/pncconf.py:457 #: src/emc/usr_intf/pncconf/pncconf.py:546 emc/usr_intf/pncconf/pncconf.py:249 #, fuzzy msgid "A Both Limit" msgstr "Beide Endschalter X" #: src/emc/usr_intf/pncconf/pncconf.py:458 #: src/emc/usr_intf/pncconf/pncconf.py:546 #, fuzzy msgid "All Limits" msgstr "Alle Endschalter" #: src/emc/usr_intf/pncconf/pncconf.py:459 emc/usr_intf/pncconf/pncconf.py:243 #, fuzzy msgid "X Home" msgstr "Pos1" #: src/emc/usr_intf/pncconf/pncconf.py:459 emc/usr_intf/pncconf/pncconf.py:243 #, fuzzy msgid "Y Home" msgstr "Pos1" #: src/emc/usr_intf/pncconf/pncconf.py:459 emc/usr_intf/pncconf/pncconf.py:243 #, fuzzy msgid "Z Home" msgstr "Pos1" #: src/emc/usr_intf/pncconf/pncconf.py:459 emc/usr_intf/pncconf/pncconf.py:243 #, fuzzy msgid "A Home" msgstr "Pos1" #: src/emc/usr_intf/pncconf/pncconf.py:459 #, fuzzy msgid "All Home" msgstr "Alle Referenzschalter" #: src/emc/usr_intf/pncconf/pncconf.py:460 #: src/emc/usr_intf/pncconf/pncconf.py:534 emc/usr_intf/pncconf/pncconf.py:244 #, fuzzy msgid "X Minimum Limit + Home" msgstr "Min. End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:460 #: src/emc/usr_intf/pncconf/pncconf.py:534 emc/usr_intf/pncconf/pncconf.py:244 #, fuzzy msgid "Y Minimum Limit + Home" msgstr "Min. End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:460 #: src/emc/usr_intf/pncconf/pncconf.py:535 emc/usr_intf/pncconf/pncconf.py:244 #, fuzzy msgid "Z Minimum Limit + Home" msgstr "Min. End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:460 #: src/emc/usr_intf/pncconf/pncconf.py:535 emc/usr_intf/pncconf/pncconf.py:244 #, fuzzy msgid "A Minimum Limit + Home" msgstr "Min. End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:461 #: src/emc/usr_intf/pncconf/pncconf.py:536 emc/usr_intf/pncconf/pncconf.py:245 #, fuzzy msgid "X Maximum Limit + Home" msgstr "Max. End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:461 #: src/emc/usr_intf/pncconf/pncconf.py:536 emc/usr_intf/pncconf/pncconf.py:245 #, fuzzy msgid "Y Maximum Limit + Home" msgstr "Max. End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:461 #: src/emc/usr_intf/pncconf/pncconf.py:537 emc/usr_intf/pncconf/pncconf.py:245 #, fuzzy msgid "Z Maximum Limit + Home" msgstr "Max. End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:461 #: src/emc/usr_intf/pncconf/pncconf.py:537 emc/usr_intf/pncconf/pncconf.py:245 #, fuzzy msgid "A Maximum Limit + Home" msgstr "Max. End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:462 #: src/emc/usr_intf/pncconf/pncconf.py:538 emc/usr_intf/pncconf/pncconf.py:246 #, fuzzy msgid "X Both Limit + Home" msgstr "Beide End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:462 #: src/emc/usr_intf/pncconf/pncconf.py:538 emc/usr_intf/pncconf/pncconf.py:246 #, fuzzy msgid "Y Both Limit + Home" msgstr "Beide End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:462 #: src/emc/usr_intf/pncconf/pncconf.py:539 #, fuzzy msgid "Z Both Limit + Home" msgstr "Beide End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:462 #: src/emc/usr_intf/pncconf/pncconf.py:539 emc/usr_intf/pncconf/pncconf.py:246 #, fuzzy msgid "A Both Limit + Home" msgstr "Beide End. + Ref. X" #: src/emc/usr_intf/pncconf/pncconf.py:464 #, fuzzy msgid "Joint select A" msgstr "Aktive Achse verfahren" #: src/emc/usr_intf/pncconf/pncconf.py:464 #, fuzzy msgid "Joint select B" msgstr "Aktive Achse verfahren" #: src/emc/usr_intf/pncconf/pncconf.py:464 #, fuzzy msgid "Joint select C" msgstr "Aktive Achse verfahren" #: src/emc/usr_intf/pncconf/pncconf.py:464 #, fuzzy msgid "Joint select D" msgstr "Aktive Achse verfahren" #: src/emc/usr_intf/pncconf/pncconf.py:465 msgid "Jog incr A" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:465 msgid "Jog incr B" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:465 msgid "Jog incr C" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:465 msgid "Jog incr D" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:465 #, fuzzy msgid "Feed Override incr A" msgstr "Vorschubübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.py:465 #, fuzzy msgid "Feed Override incr B" msgstr "Vorschubübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.py:466 #, fuzzy msgid "Feed Override incr C" msgstr "Vorschubübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.py:466 #, fuzzy msgid "Feed Override incr D" msgstr "Vorschubübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.py:466 #, fuzzy msgid "Spindle Override incr A" msgstr "Spindelübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.py:466 #, fuzzy msgid "Spindle Override incr B" msgstr "Spindelübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.py:467 #, fuzzy msgid "Spindle Override incr C" msgstr "Spindelübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.py:467 #, fuzzy msgid "Spindle Override incr D" msgstr "Spindelübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.py:467 msgid "Max Vel Override incr A" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:467 msgid "Max Vel Override incr B" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:468 msgid "Max Vel Override incr C" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:468 msgid "Max Vel Override incr D" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:469 #, fuzzy msgid "Manual Spindle CW" msgstr "Spindel rechts" #: src/emc/usr_intf/pncconf/pncconf.py:469 #, fuzzy msgid "Manual Spindle CCW" msgstr "Spindel links" #: src/emc/usr_intf/pncconf/pncconf.py:469 #, fuzzy msgid "Manual Spindle Stop" msgstr "SPINDEL LANGSAMER" #: src/emc/usr_intf/pncconf/pncconf.py:469 #, fuzzy msgid "Spindle Up-To-Speed" msgstr "Spindeldrehzahl (1/min)" #: src/emc/usr_intf/pncconf/pncconf.py:470 msgid "Cycle Start" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:470 msgid "Abort" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:470 #, fuzzy msgid "Single Step" msgstr "ein Leerzeichen" #: src/emc/usr_intf/pncconf/pncconf.py:477 #: src/emc/usr_intf/pncconf/pncconf.py:529 #, fuzzy msgid "Jog X +" msgstr "X +" #: src/emc/usr_intf/pncconf/pncconf.py:477 #: src/emc/usr_intf/pncconf/pncconf.py:529 #, fuzzy msgid "Jog X -" msgstr "X -" #: src/emc/usr_intf/pncconf/pncconf.py:477 #: src/emc/usr_intf/pncconf/pncconf.py:530 msgid "Jog Y +" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:477 #: src/emc/usr_intf/pncconf/pncconf.py:530 msgid "Jog Y -" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:477 #: src/emc/usr_intf/pncconf/pncconf.py:531 msgid "Jog Z +" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:477 #: src/emc/usr_intf/pncconf/pncconf.py:531 msgid "Jog Z -" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:477 #: src/emc/usr_intf/pncconf/pncconf.py:532 msgid "Jog A +" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:477 #: src/emc/usr_intf/pncconf/pncconf.py:532 msgid "Jog A -" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:478 #, fuzzy msgid "Jog button selected +" msgstr "Aktive Achse verfahren" #: src/emc/usr_intf/pncconf/pncconf.py:478 #, fuzzy msgid "Jog button selected -" msgstr "Aktive Achse verfahren" #: src/emc/usr_intf/pncconf/pncconf.py:479 emc/usr_intf/pncconf/pncconf.py:242 #, fuzzy msgid "Unused Input" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:479 #, fuzzy msgid "Limits" msgstr "Alle Endschalter" #: src/emc/usr_intf/pncconf/pncconf.py:479 msgid "Limts/Home Shared" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:480 #, fuzzy msgid "Axis Selection" msgstr "A Richtung" #: src/emc/usr_intf/pncconf/pncconf.py:480 #, fuzzy msgid "Overrides" msgstr "Grenzwerte aufheben" #: src/emc/usr_intf/pncconf/pncconf.py:481 #, fuzzy msgid "Operation" msgstr "Beschleunigung:" #: src/emc/usr_intf/pncconf/pncconf.py:481 #, fuzzy msgid "External Control" msgstr "Manuelle Kontrolle" #: src/emc/usr_intf/pncconf/pncconf.py:481 #, fuzzy msgid "Axis rapid" msgstr "Achse" #: src/emc/usr_intf/pncconf/pncconf.py:483 #, fuzzy msgid "S BLDC Control" msgstr "Strg-M" #: src/emc/usr_intf/pncconf/pncconf.py:556 emc/usr_intf/pncconf/pncconf.py:277 #, fuzzy msgid "Unused PWM Gen" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:556 #, fuzzy msgid "X Axis PWM" msgstr "Achse" #: src/emc/usr_intf/pncconf/pncconf.py:556 #, fuzzy msgid "Y Axis PWM" msgstr "Achse" #: src/emc/usr_intf/pncconf/pncconf.py:557 #, fuzzy msgid "Z Axis PWM" msgstr "Achse" #: src/emc/usr_intf/pncconf/pncconf.py:557 #, fuzzy msgid "A Axis PWM" msgstr "Achse" #: src/emc/usr_intf/pncconf/pncconf.py:581 #, fuzzy msgid "X Encoder" msgstr "Ende" #: src/emc/usr_intf/pncconf/pncconf.py:581 #, fuzzy msgid "Y Encoder" msgstr "Ende" #: src/emc/usr_intf/pncconf/pncconf.py:581 #, fuzzy msgid "Z Encoder" msgstr "Ende" #: src/emc/usr_intf/pncconf/pncconf.py:581 #, fuzzy msgid "A Encoder" msgstr "Ende" #: src/emc/usr_intf/pncconf/pncconf.py:581 #, fuzzy msgid "Spindle Encoder" msgstr "Spindelencoder Kanal A" #: src/emc/usr_intf/pncconf/pncconf.py:582 msgid "X Hand Wheel" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:582 msgid "Y Hand Wheel" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:582 msgid "Z Hand Wheel" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:582 msgid "A Hand Wheel" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:582 msgid "Multi Hand Wheel" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:583 #, fuzzy msgid "Feed Override" msgstr "Vorschubübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.py:583 #, fuzzy msgid "spindle Override" msgstr "Spindelübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.py:583 #, fuzzy msgid "Max Vel Override" msgstr "Vorschubübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.py:584 emc/usr_intf/pncconf/pncconf.py:298 #, fuzzy msgid "Unused Encoder" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:584 #, fuzzy msgid "Axis Encoder" msgstr "Ende" #: src/emc/usr_intf/pncconf/pncconf.py:584 msgid "MPG Jog Controls" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:584 msgid "Override MPG control" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:587 #, fuzzy msgid "Unused Resolver" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:587 msgid "X Resolver" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:587 msgid "Y Resolver" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:587 msgid "Z Resolver" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:588 msgid "A Resolver" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:588 msgid "S Resolver" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:592 #, fuzzy msgid "Unused 8I20" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:592 #: src/emc/usr_intf/pncconf/pncconf.glade:61457 #: emc/usr_intf/pncconf/pncconf.glade:21191 #, fuzzy msgid "X Axis" msgstr "Achse" #: src/emc/usr_intf/pncconf/pncconf.py:592 #: src/emc/usr_intf/pncconf/pncconf.glade:62549 #: emc/usr_intf/pncconf/pncconf.glade:21890 #, fuzzy msgid "Y Axis" msgstr "Achse" #: src/emc/usr_intf/pncconf/pncconf.py:592 #: src/emc/usr_intf/pncconf/pncconf.glade:63642 #: emc/usr_intf/pncconf/pncconf.glade:22590 #, fuzzy msgid "Z Axis" msgstr "Achse" #: src/emc/usr_intf/pncconf/pncconf.py:593 #: src/emc/usr_intf/pncconf/pncconf.glade:64735 #: emc/usr_intf/pncconf/pncconf.glade:23290 #, fuzzy msgid "A Axis" msgstr "Achse" #: src/emc/usr_intf/pncconf/pncconf.py:597 #, fuzzy msgid "Unused Analog Output" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:597 #, fuzzy msgid "Spindle Output" msgstr "Spindel ein" #: src/emc/usr_intf/pncconf/pncconf.py:613 emc/usr_intf/pncconf/pncconf.py:320 #, fuzzy msgid "Unused StepGen" msgstr "Nicht abgeschlossener Ausdruck" #: src/emc/usr_intf/pncconf/pncconf.py:613 #, fuzzy msgid "X Axis StepGen" msgstr "Nicht abgeschlossener Ausdruck" #: src/emc/usr_intf/pncconf/pncconf.py:613 #, fuzzy msgid "Y Axis StepGen" msgstr "Nicht abgeschlossener Ausdruck" #: src/emc/usr_intf/pncconf/pncconf.py:613 #, fuzzy msgid "Z Axis StepGen" msgstr "Nicht abgeschlossener Ausdruck" #: src/emc/usr_intf/pncconf/pncconf.py:614 #, fuzzy msgid "A Axis StepGen" msgstr "Nicht abgeschlossener Ausdruck" #: src/emc/usr_intf/pncconf/pncconf.py:614 #, fuzzy msgid "Spindle StepGen" msgstr "X Schritt" #: src/emc/usr_intf/pncconf/pncconf.py:628 #, fuzzy msgid "Unused TPPWM Gen" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.py:628 msgid "X Axis BL Driver" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:628 msgid "Y Axis BL Driver" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:629 msgid "Z Axis BL Driver" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:629 msgid "A Axis BL Driver" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:629 msgid "S Axis BL Driver" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:636 #: src/emc/usr_intf/pncconf/pncconf.py:6557 #, fuzzy msgid "Unused Channel" msgstr "Ausgewähler Kanal" #: src/emc/usr_intf/pncconf/pncconf.py:636 #, fuzzy msgid "8i20 Amplifier Card" msgstr "Endstufe aktivieren" #: src/emc/usr_intf/pncconf/pncconf.py:636 msgid "7i64 I/O Card" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:636 msgid "7i69 I/O Card" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:637 msgid "7i70 I/O Card" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:637 msgid "7i71 I/O Card" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:637 msgid "7i76 Mode 0 I/O Card" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:722 #, fuzzy msgid "my_LinuxCNC_machine" msgstr "_Maschine" #: src/emc/usr_intf/pncconf/pncconf.py:1328 msgid "" "This configuration was saved with an earlier version of pncconf which may be " "incompatible.\n" "If it doesn't plainly cause an error, you still may want to save it with " "another name and check it. Safer to start from scratch.\n" "If you have a REALLY large config that you wish to convert to this newer " "version of PNConf - ask on the LinuxCNC forum - it may be possible.." msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:1334 #: emc/usr_intf/pncconf/pncconf.py:753 #, fuzzy, python-format msgid "File %r was modified since it was written by PNCconf" msgstr "Die Date %r wurde geändert, seitdem sie mit stepconf erstellt wurde." #: src/emc/usr_intf/pncconf/pncconf.py:1338 #: emc/usr_intf/pncconf/pncconf.py:757 #, fuzzy msgid "" "Saving this configuration file will discard configuration changes made " "outside PNCconf." msgstr "" "Beim speichern dieser Konfiguration werden Änderungen, die nicht mit " "stepconf durchgeführt wurden, überschrieben." #: src/emc/usr_intf/pncconf/pncconf.py:1365 #: src/emc/usr_intf/pncconf/pncconf.py:2368 #: emc/usr_intf/pncconf/pncconf.py:781 emc/usr_intf/pncconf/pncconf.py:1257 #, fuzzy, python-format msgid "# Generated by PNCconf at %s" msgstr "# Erstellt von stepconf am %s" #: src/emc/usr_intf/pncconf/pncconf.py:1367 #: src/emc/usr_intf/pncconf/pncconf.py:2370 #: emc/usr_intf/pncconf/pncconf.py:783 emc/usr_intf/pncconf/pncconf.py:1259 #, fuzzy msgid "# overwritten when you run PNCconf again" msgstr "# Aufruf von stepconf überschrieben." #: src/emc/usr_intf/pncconf/pncconf.py:2070 msgid "# Use ACTUAL spindle velocity from spindle encoder" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2071 msgid "# spindle-velocity bounces around so we filter it with lowpass" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2072 msgid "" "# spindle-velocity is signed so we use absolute component to remove sign" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2073 msgid "# ACTUAL velocity is in RPS not RPM so we scale it." msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2082 msgid "" "# Use COMMANDED spindle velocity from LinuxCNC because no spindle encoder " "was specified" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2083 msgid "" "# COMMANDED velocity is signed so we use absolute component to remove sign" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2727 msgid "# connect miscellaneous signals" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2730 msgid "# ---HALUI signals---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2749 msgid "# ---charge pump signals---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2753 msgid "# ---coolant signals---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2758 msgid "# ---probe signal---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2763 msgid "# ---jog button signals---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2768 msgid "# ---USB device jog button signals---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2803 #: src/emc/usr_intf/pncconf/pncconf.py:2825 msgid "# ---mpg signals---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2971 msgid "# ---motion control signals---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2976 msgid "# ---digital in / out signals---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:2986 msgid "# ---estop signals---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3005 msgid "# ---manual tool change signals---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3014 msgid "# ---toolchange signals for custom tool changer---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3036 msgid "# --- Classicladder signals for Z axis Auto touch off program---" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3055 msgid "# These files are loaded post gladeVCP, in the order they appear" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3069 #: src/emc/usr_intf/pncconf/pncconf.py:3136 #, fuzzy msgid "# _DO NOT_ include your HAL commands here." msgstr "" "# Benutzerdefinierte HAL-Anweisungen können nachfolgend angegeben werden" #: src/emc/usr_intf/pncconf/pncconf.py:3070 msgid "# Put custom HAL commands in custom_gvcp.hal" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3073 msgid "# **** Setup of spindle speed display using gladevcp ****" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3082 msgid "# **** Setup GLADE MDI buttons ****" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3095 msgid "" "# **** Z axis touch-off button - requires the touch-off classicladder " "program ****" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3125 msgid "# These files are loaded post GUI, in the order they appear" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3137 msgid "# Put custom HAL commands in custom_postgui.hal" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3138 #, fuzzy msgid "# The commands in this file are run after the GUI loads" msgstr "" "# Die Befehle in dieser Datei werden nach der AXIS GUI (und PyVCP-Panel) " "ausgeführt." #: src/emc/usr_intf/pncconf/pncconf.py:3148 msgid "# **** Setup of spindle speed display using pyvcp -END ****" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3160 #: emc/usr_intf/pncconf/pncconf.py:1627 #, fuzzy msgid "# This file will not be overwritten when you run PNCconf again" msgstr "" "# Diese Datei wird überschrieben, wenn stepconf erneut ausgeführt wird." #: src/emc/usr_intf/pncconf/pncconf.py:3166 msgid "# These commands are required for Touchy GUI" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3218 #: emc/usr_intf/pncconf/pncconf.py:1634 #, fuzzy, python-format msgid "Generated by PNCconf at %s" msgstr "Erstell durch stepconf am %s" #: src/emc/usr_intf/pncconf/pncconf.py:3230 msgid "configures LinuxCNC as:\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3231 msgid "type CNC\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3232 #: emc/usr_intf/pncconf/pncconf.py:1649 msgid "will be used as the frontend display" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3241 msgid " connector" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3253 msgid "invrt" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3262 #: emc/usr_intf/pncconf/pncconf.py:1692 #, python-format msgid "%(name)s Parport" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3267 #: src/emc/usr_intf/pncconf/pncconf.py:3275 #: emc/usr_intf/pncconf/pncconf.py:1662 emc/usr_intf/pncconf/pncconf.py:1673 #: emc/usr_intf/pncconf/pncconf.py:1684 emc/usr_intf/pncconf/pncconf.py:1697 #: emc/usr_intf/pncconf/pncconf.py:1705 msgid "-> inverted" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3269 #: emc/usr_intf/pncconf/pncconf.py:1699 #, python-format msgid "pin# %(pinnum)d is connected to input signal:'%(data)s' %(mesag)s" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3277 #: emc/usr_intf/pncconf/pncconf.py:1707 #, python-format msgid "pin# %(pinnum)d is connected to output signal:'%(data)s' %(mesag)s" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:3455 #, fuzzy msgid "Desktop Launcher for LinuxCNC config made by PNCconf" msgstr "" "Verknüpfung zum starten von EMC mit einer festgelegten Konfiguration, " "erstellt von Stepconf" #: src/emc/usr_intf/pncconf/pncconf.py:3725 #, fuzzy msgid "Spindle Motor/Encoder Configuration" msgstr "Konfiguration der X-Achse" #: src/emc/usr_intf/pncconf/pncconf.py:3727 #: emc/usr_intf/pncconf/pncconf.py:1940 #, fuzzy, python-format msgid "%s Axis Motor/Encoder Configuration" msgstr "Konfiguration der %s-Achse" #: src/emc/usr_intf/pncconf/pncconf.py:3756 #: emc/usr_intf/pncconf/pncconf.py:1964 #, fuzzy, python-format msgid "%s Parallel Port Setup" msgstr "Konfiguration der Druckerschnittstelle" #: src/emc/usr_intf/pncconf/pncconf.py:3780 #, python-format msgid "%s I/0 Setup" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:4001 #: emc/usr_intf/pncconf/pncconf.py:2023 #, fuzzy msgid "Quit PNCconfig and discard changes?" msgstr "Maschinenkonfiguration beenden und Änderungen verwerfen?" #: src/emc/usr_intf/pncconf/pncconf.py:4042 #: src/emc/usr_intf/pncconf/pncconf.glade:65849 #: emc/usr_intf/pncconf/pncconf.glade:23341 #, fuzzy msgid "Help Pages" msgstr "Bilddateien" #: src/emc/usr_intf/pncconf/pncconf.py:4047 #: emc/usr_intf/pncconf/pncconf.py:2067 #, fuzzy msgid "Help page is unavailable\n" msgstr "Es ist keine Beschreibung verfügbar." #: src/emc/usr_intf/pncconf/pncconf.py:4054 msgid "" "You are using a simulated-realtime version of LinuxCNC, so testing / tuning " "of external hardware is unavailable." msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:4059 #, python-format msgid "" "You are using a realtime version of LinuxCNC but didn't load a realtime " "kernel so testing / tuning of external hardware is unavailable.\n" " This is probably because you updated the OS and it doesn't load the RTAI " "kernel anymore\n" " You are using the %(actual)s kernel instead of %(needed)s" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:4079 #, python-format msgid "" "You are have no hostmot2 firmware downloaded in folder:\n" "%s\n" "PNCconf will use sample firmware data\n" "live testing will not be possible" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:4093 #, fuzzy msgid "LinuxCNC 'PNCconf' configuration files" msgstr ".stepconf Dateien" #: src/emc/usr_intf/pncconf/pncconf.py:4123 msgid "" "It seems data in this file is from too old of a version of PNCConf to " "continue.\n" "." msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:4130 #: src/emc/usr_intf/pncconf/pncconf.py:4228 #, fuzzy, python-format msgid "Point and click configuration - %s.pncconf " msgstr "EMC2 Maschinenkonfiguration" #: src/emc/usr_intf/pncconf/pncconf.py:4250 #: emc/usr_intf/pncconf/pncconf.py:2191 msgid "" "You need to designate a parport and/or mesa I/O device before continuing." msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:4309 msgid "" "You Have choosen to re-edit the current config, so you can not go to the new/" "modify page.\n" " Quit and reload PNCconf if you wish to build a new config." msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:4313 msgid "" "If you can not go to the new/modify page your current data will be lost.\n" "Ok to reset data and start a new configuration?" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:4594 msgid "USB device Info Search" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:4608 #, fuzzy msgid "USB device page is unavailable\n" msgstr "Es ist keine Beschreibung verfügbar." #: src/emc/usr_intf/pncconf/pncconf.py:4673 #, fuzzy msgid "Pin names are unavailable\n" msgstr "Es ist keine Beschreibung verfügbar." #: src/emc/usr_intf/pncconf/pncconf.py:4695 #, fuzzy msgid "Device names are unavailable\n" msgstr "Es ist keine Beschreibung verfügbar." #: src/emc/usr_intf/pncconf/pncconf.py:4698 msgid "No Pncconf made device rules were found\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:4822 msgid "" "OK to replace existing glade panel ?\n" "It will be renamed and added to 'backups' folder.\n" " Clicking 'existing custom program' will aviod this warning. " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:4827 #, fuzzy msgid "" "OK to replace existing custom pyvcp panel?\n" "Existing pyvcp-panel.xml will be renamed and added to 'backups' folder\n" "Clicking 'existing custom program' will aviod this warning. " msgstr "" "Mit »OK« wird das bestehende benutzerdefinierte SPS-Programm ersetzt.\n" "Eine bestehende »Custom.clp«-Datei wird in custom_backup.clp« umbenannt.\n" "Eine bestehende »custom_backup.clp«-Dateien geht somit verloren." #: src/emc/usr_intf/pncconf/pncconf.py:5250 msgid "" "You need to configure the mesa0 page.\n" " Choose the board type, firmware, component amounts and press 'Accept " "component changes' button'" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:5254 msgid "" "The chosen Mesa0 board is different from the current displayed.\n" "please press 'Accept component changes' button'" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:5297 msgid "" "You need to configure the mesa1 page.\n" " Choose the board type, firmware, component amounts and press 'Accept " "component changes' button'" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:5301 msgid "" "The chosen Mesa1 board is different from the current displayed.\n" "please press 'Accept component changes' button'" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:5315 msgid "" "Do to technical reasons this test panel can be loaded only once without " "reloading pncconf.You also will not be able to do any other testing untill " "you reload pncconf and quite possibly open a terminal and type 'halrun -U' I " "hesitate to even allow it's use but at times it's very useful.\n" "Do you wish to continue the test?" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6699 #: emc/usr_intf/pncconf/pncconf.py:3036 #, fuzzy msgid "First Parallel Port set for OUTPUT" msgstr "Konfiguration der Druckerschnittstelle" #: src/emc/usr_intf/pncconf/pncconf.py:6701 #: emc/usr_intf/pncconf/pncconf.py:3038 #, fuzzy msgid "First Parallel Port set for INPUT" msgstr "Konfiguration der Druckerschnittstelle" #: src/emc/usr_intf/pncconf/pncconf.py:6725 #: emc/usr_intf/pncconf/pncconf.py:3058 msgid "Second Parallel Port set for OUTPUT" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6727 #: emc/usr_intf/pncconf/pncconf.py:3060 #, fuzzy msgid "Second Parallel Port set for INPUT" msgstr "Konfiguration der Druckerschnittstelle" #: src/emc/usr_intf/pncconf/pncconf.py:6739 #: emc/usr_intf/pncconf/pncconf.py:3072 #, fuzzy msgid "Third Parallel Port set for OUTPUT" msgstr "Konfiguration der Druckerschnittstelle" #: src/emc/usr_intf/pncconf/pncconf.py:6741 #: emc/usr_intf/pncconf/pncconf.py:3074 #, fuzzy msgid "Third Parallel Port set for INPUT" msgstr "Konfiguration der Druckerschnittstelle" #: src/emc/usr_intf/pncconf/pncconf.py:6866 msgid "You can not have both steppers and pwm signals for spindle control\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6870 #, python-format msgid "You forgot to designate a stepper or pwm signal for axis %s\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6873 #, python-format msgid "You forgot to designate an encoder /resolver signal for axis %s servo\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6876 #, python-format msgid "You forgot to designate a pwm signal or stepper signal for axis %s\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6879 #, python-format msgid "You can not have both steppers and pwm signals for axis %s\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6887 msgid "Touchy require an external cycle start signal\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6890 msgid "Touchy require an external abort signal\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6893 msgid "Touchy require an external single-step signal\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6896 msgid "" "Touchy require an external multi handwheel MPG encoder signal on the mesa " "page\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6899 msgid "" "Touchy require 'external mpg jogging' to be selected on the external control " "page\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6902 msgid "" "Touchy require the external mpg to be in 'shared mpg' mode on the external " "controls page\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6905 msgid "" "Touchy require selectable increments to be unchecked on the external " "controls page\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6909 msgid "" "The 7i29 daughter board requires PWM type generators and a PWM base " "frequency of 20 khz\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6912 msgid "" "The 7i30 daughter board requires PWM type generators and a PWM base " "frequency of 20 khz\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6915 msgid "" "The 7i33 daughter board requires PDM type generators and a PDM base " "frequency of 6 Mhz\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6918 msgid "" "The 7i40 daughter board requires PWM type generators and a PWM base " "frequency of 50 khz\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:6921 msgid "" "The 7i48 daughter board requires UDM type generators and a PWM base " "frequency of 24 khz\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:7148 msgid "Gearbox Reduction Ratio" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:7151 #: emc/usr_intf/pncconf/pncconf.py:3285 msgid "Reduction Ratio" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:7154 #: emc/usr_intf/pncconf/pncconf.py:3303 #, fuzzy msgid "Leadscrew Pitch" msgstr "_Spindelsteigung:" #: src/emc/usr_intf/pncconf/pncconf.py:7157 #: src/emc/usr_intf/pncconf/pncconf.glade:66327 #: src/emc/usr_intf/pncconf/pncconf.glade:66622 #: emc/usr_intf/pncconf/pncconf.py:3322 #, fuzzy msgid "Leadscrew TPI" msgstr "_Spindelsteigung:" #: src/emc/usr_intf/pncconf/pncconf.py:7161 #: src/emc/usr_intf/pncconf/pncconf.py:7162 msgid "(" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:7163 #: src/emc/usr_intf/pncconf/pncconf.py:7173 #: src/emc/usr_intf/pncconf/pncconf.py:7174 #: src/emc/usr_intf/pncconf/pncconf.py:7175 #, fuzzy msgid " / min" msgstr "mm / s" #: src/emc/usr_intf/pncconf/pncconf.py:7164 #, fuzzy msgid " / sec²" msgstr "mm / s²" #: src/emc/usr_intf/pncconf/pncconf.py:7167 #, fuzzy msgid " / Step" msgstr "mm / Umdrehung" #: src/emc/usr_intf/pncconf/pncconf.py:7168 #, fuzzy msgid "Steps / " msgstr "Schritte / mm" #: src/emc/usr_intf/pncconf/pncconf.py:7170 #, fuzzy msgid " / encoder pulse" msgstr "Grad / Umdrehung" #: src/emc/usr_intf/pncconf/pncconf.py:7171 #, fuzzy msgid "Encoder pulses / " msgstr "mm / Umdrehung" #: src/emc/usr_intf/pncconf/pncconf.py:7482 msgid "Axis Scale Calculation" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:7785 #: emc/usr_intf/pncconf/pncconf.py:3703 #, fuzzy msgid "You need to designate an E-stop input pin for this ladder program." msgstr "" "Für dieses Programm muss ein Notaus-Eingang auf der Seite zur Konfiguration " "der parallelen Schnitstelle festgelegt wein." #: src/emc/usr_intf/pncconf/pncconf.py:7797 #, fuzzy msgid "You need to designate a probe input pin for this ladder program." msgstr "" "Für dieses Programm muss ein Notaus-Eingang auf der Seite zur Konfiguration " "der parallelen Schnitstelle festgelegt wein." #: src/emc/usr_intf/pncconf/pncconf.py:7808 #, fuzzy msgid "" "OK to replace existing custom ladder program?\n" "Existing Custom.clp will be renamed custom_backup.clp.\n" "Any existing file named -custom_backup.clp- will be lost.Selecting 'existing " "ladder program' will avoid this warning" msgstr "" "Mit »OK« wird das bestehende benutzerdefinierte SPS-Programm ersetzt.\n" "Eine bestehende »Custom.clp«-Datei wird in custom_backup.clp« umbenannt.\n" "Eine bestehende »custom_backup.clp«-Dateien geht somit verloren." #: src/emc/usr_intf/pncconf/pncconf.py:8019 msgid "Do you wish to continue to edit this configuration." msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:8058 #, fuzzy msgid "PCI search page is unavailable\n" msgstr "Es ist keine Beschreibung verfügbar." #: src/emc/usr_intf/pncconf/pncconf.py:8176 msgid "" "You specified there is an existing gladefile, But there is not one in the " "machine-named folder.." msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:8495 msgid "Servo tuning is not avaiable in PNCconf yet\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:8500 #: emc/usr_intf/pncconf/pncconf.py:3292 emc/usr_intf/pncconf/pncconf.py:3299 #: emc/usr_intf/pncconf/pncconf.py:3300 emc/usr_intf/pncconf/pncconf.py:4168 #, fuzzy msgid "degrees" msgstr "Grad / Umdrehung" #: src/emc/usr_intf/pncconf/pncconf.py:8501 #: emc/usr_intf/pncconf/pncconf.py:4169 #, fuzzy msgid "degrees / minute" msgstr "Grad / Umdrehung" #: src/emc/usr_intf/pncconf/pncconf.py:8502 #: emc/usr_intf/pncconf/pncconf.py:4170 #, fuzzy msgid "degrees / second²" msgstr "Grad / Umdrehung" #: src/emc/usr_intf/pncconf/pncconf.py:8504 #, fuzzy msgid "revolutions" msgstr "Position:" #: src/emc/usr_intf/pncconf/pncconf.py:8505 msgid "rpm" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:8506 #, fuzzy msgid "revs / second²" msgstr "Grad / Umdrehung" #: src/emc/usr_intf/pncconf/pncconf.py:8509 #: src/emc/usr_intf/pncconf/pncconf.glade:58295 #: src/emc/usr_intf/pncconf/pncconf.glade:58479 #: src/emc/usr_intf/pncconf/pncconf.glade:58576 #: emc/usr_intf/pncconf/pncconf.py:4173 #: emc/usr_intf/pncconf/pncconf.glade:16467 #: emc/usr_intf/pncconf/pncconf.glade:16620 #: emc/usr_intf/pncconf/pncconf.glade:16688 #, fuzzy msgid "mm / minute" msgstr "mm / Umdrehung" #: src/emc/usr_intf/pncconf/pncconf.py:8510 #: emc/usr_intf/pncconf/pncconf.py:4174 #, fuzzy msgid "mm / second²" msgstr "mm / s²" #: src/emc/usr_intf/pncconf/pncconf.py:8513 #: emc/usr_intf/pncconf/pncconf.py:4177 msgid "inches / minute" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:8514 #: emc/usr_intf/pncconf/pncconf.py:4178 #, fuzzy msgid "inches / second²" msgstr "in / s²" #: src/emc/usr_intf/pncconf/pncconf.py:8646 #: emc/usr_intf/pncconf/pncconf.py:4289 #, fuzzy, python-format msgid "%s Axis Tune" msgstr "Test %s-Achse" #: src/emc/usr_intf/pncconf/pncconf.py:8810 msgid "" " You must designate a ENCODER / RESOLVER signal and an ANALOG SPINDLE signal " "for this axis test" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.py:8814 msgid "" " You must designate a ENCODER / RESOLVER signal and a PWM signal for this " "axis test" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8 #, fuzzy msgid "LinuxCNC Point And Click Configuration" msgstr "EMC2 Maschinenkonfiguration" #: src/emc/usr_intf/pncconf/pncconf.glade:23 #, fuzzy msgid "LinuxCNC Configuration Wizard Beta 1 Version" msgstr "EMC2 Konfigurationsassistent" #: src/emc/usr_intf/pncconf/pncconf.glade:24 #: emc/usr_intf/pncconf/pncconf.glade:24 msgid "" "\tThis program creates configuration \n" " files for \"Closed Loop Servo\" \n" "\t \t and hardware stepper\n" " \tmachines" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:34 #: emc/usr_intf/pncconf/pncconf.glade:34 msgid "Create or Edit" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:52 #: emc/usr_intf/pncconf/pncconf.glade:147 #, fuzzy msgid "Create a new configuration" msgstr "Eine _neune Konfiguration erstellen" #: src/emc/usr_intf/pncconf/pncconf.glade:118 #: emc/usr_intf/pncconf/pncconf.glade:82 #, fuzzy msgid "Create a desktop shortcut (symlink) to configuration files." msgstr "Verknüpfung zu den _Konfigurationsdateien auf dem Destop erstellen" #: src/emc/usr_intf/pncconf/pncconf.glade:135 #: emc/usr_intf/pncconf/pncconf.glade:65 #, fuzzy msgid "Create a desktop launcher to start LinuxCNC with this configuration." msgstr "" "Verknüpfung zum _Starten vom LinuxCNC mit dieser Konfiguration auf dem " "Destop erstellen" #: src/emc/usr_intf/pncconf/pncconf.glade:214 #: emc/usr_intf/pncconf/pncconf.glade:212 #, fuzzy msgid "Machine Name:" msgstr "Maschinen_name:" #: src/emc/usr_intf/pncconf/pncconf.glade:281 #: emc/usr_intf/pncconf/pncconf.glade:279 #, fuzzy msgid "Axis configuration:" msgstr "A_chsen:" #: src/emc/usr_intf/pncconf/pncconf.glade:316 #: emc/usr_intf/pncconf/pncconf.glade:314 #, fuzzy msgid "Machine units:" msgstr "_Einheiten:" #: src/emc/usr_intf/pncconf/pncconf.glade:355 #: emc/usr_intf/pncconf/pncconf.glade:353 msgid "Machine Basics" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:405 msgid "Recommend servo period: 1000000" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:431 msgid "Actual Servo Period: " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:486 #: emc/usr_intf/pncconf/pncconf.glade:397 #, fuzzy msgid "" " Test Base\n" "Period Jitter " msgstr "" "Systemtakt-Abweichung\n" "(Jitter) er_mitteln" #: src/emc/usr_intf/pncconf/pncconf.glade:511 #: emc/usr_intf/pncconf/pncconf.glade:521 msgid "Computer Response Time" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:553 msgid "Mesa0 PCI / Parport Card:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:563 msgid "Mesa1 PCI / Parport Card:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:576 #: emc/usr_intf/pncconf/pncconf.glade:579 #, fuzzy msgid "First Parport Address:" msgstr "Adresse der ersten _parallelen Schnittstelle:" #: src/emc/usr_intf/pncconf/pncconf.glade:589 #: emc/usr_intf/pncconf/pncconf.glade:592 #, fuzzy msgid "Second Parport Address:" msgstr "Adresse der z_weiten parallellen Schnittstelle:" #: src/emc/usr_intf/pncconf/pncconf.glade:604 #: emc/usr_intf/pncconf/pncconf.glade:607 #, fuzzy msgid "Third Parport Address:" msgstr "Adresse der dr_itten parallellen Schnittstelle:" #: src/emc/usr_intf/pncconf/pncconf.glade:627 #: src/emc/usr_intf/pncconf/pncconf.glade:635 #: emc/usr_intf/pncconf/pncconf.glade:1761 msgid "" "5i20\n" "5i23\n" "5i22" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:708 #: src/emc/usr_intf/pncconf/pncconf.glade:720 #: src/emc/usr_intf/pncconf/pncconf.glade:733 #: emc/usr_intf/stepconf/stepconf.glade:384 #: emc/usr_intf/stepconf/stepconf.glade:400 #: emc/usr_intf/pncconf/pncconf.glade:711 #: emc/usr_intf/pncconf/pncconf.glade:723 #: emc/usr_intf/pncconf/pncconf.glade:736 msgid "" "In\n" "Out" msgstr "" "Eingang\n" "Ausgang" #: src/emc/usr_intf/pncconf/pncconf.glade:796 msgid "" "Add-on PCI\n" " Parport\n" " Address \n" " Search" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:821 #: emc/usr_intf/pncconf/pncconf.glade:769 msgid "I/O Control Ports/ Boards" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:870 #, fuzzy msgid "Axis" msgstr "Achse" #: src/emc/usr_intf/pncconf/pncconf.glade:885 msgid "TKLinuxCNC" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:899 #: emc/usr_intf/pncconf/pncconf.glade:1165 #, fuzzy msgid "Mini" msgstr "Allgemein" #: src/emc/usr_intf/pncconf/pncconf.glade:913 #: src/emc/usr_intf/pncconf/pncconf.glade:6648 #, fuzzy msgid "Touchy" msgstr "Antasten" #: src/emc/usr_intf/pncconf/pncconf.glade:930 msgid "GUI frontend list" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:965 #, fuzzy msgid "External Controls" msgstr "Manuelle Kontrolle" #: src/emc/usr_intf/pncconf/pncconf.glade:1006 msgid "Add device rule" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1019 #, fuzzy msgid "Test device" msgstr "Testbereich:" #: src/emc/usr_intf/pncconf/pncconf.glade:1033 msgid "Search for device rules" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1054 #, fuzzy msgid "Device Name:" msgstr "Maschinen_name:" #: src/emc/usr_intf/pncconf/pncconf.glade:1117 #: src/emc/usr_intf/pncconf/pncconf.glade:1255 #, fuzzy msgid "Jog Speed select A" msgstr "Aktive Achse verfahren" #: src/emc/usr_intf/pncconf/pncconf.glade:1195 msgid "Z -" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1207 msgid "Y -" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1219 #, fuzzy msgid "X -" msgstr "X -" #: src/emc/usr_intf/pncconf/pncconf.glade:1229 msgid "Z +" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1239 msgid "Y +" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1249 #, fuzzy msgid "X +" msgstr "X +" #: src/emc/usr_intf/pncconf/pncconf.glade:1289 #: src/emc/usr_intf/pncconf/pncconf.glade:2208 #: src/emc/usr_intf/pncconf/pncconf.glade:3496 #: src/emc/usr_intf/pncconf/pncconf.glade:4377 #: src/emc/usr_intf/pncconf/pncconf.glade:5258 #, fuzzy msgid "default" msgstr "Spindelencoder Index" #: src/emc/usr_intf/pncconf/pncconf.glade:1299 #: src/emc/usr_intf/pncconf/pncconf.glade:2107 #: src/emc/usr_intf/pncconf/pncconf.glade:3443 #: src/emc/usr_intf/pncconf/pncconf.glade:4324 #: src/emc/usr_intf/pncconf/pncconf.glade:5205 #, fuzzy msgid " a)" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/pncconf/pncconf.glade:1311 #: src/emc/usr_intf/pncconf/pncconf.glade:2096 #: src/emc/usr_intf/pncconf/pncconf.glade:3432 #: src/emc/usr_intf/pncconf/pncconf.glade:4313 #: src/emc/usr_intf/pncconf/pncconf.glade:5194 #, fuzzy msgid " b)" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/pncconf/pncconf.glade:1322 msgid " ab)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1348 #: src/emc/usr_intf/pncconf/pncconf.glade:1401 #: src/emc/usr_intf/pncconf/pncconf.glade:1413 #: src/emc/usr_intf/pncconf/pncconf.glade:1423 #: src/emc/usr_intf/pncconf/pncconf.glade:1751 msgid "mm/min " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1456 msgid "A -" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1468 msgid "A +" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1492 #, fuzzy msgid "Digital Control" msgstr "Digitaler Ausgang 0" #: src/emc/usr_intf/pncconf/pncconf.glade:1539 msgid "X " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1545 #: src/emc/usr_intf/pncconf/pncconf.glade:5901 #: src/emc/usr_intf/pncconf/pncconf.glade:6531 #: src/emc/usr_intf/pncconf/pncconf.glade:6910 #: src/emc/usr_intf/pncconf/pncconf.glade:7257 #: emc/usr_intf/pncconf/pncconf.glade:1356 #, fuzzy msgid "Y" msgstr "jJ" #: src/emc/usr_intf/pncconf/pncconf.glade:1555 msgid "Z" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1565 msgid "A" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1623 #, fuzzy msgid "Analog Control" msgstr "Manuelle Kontrolle" #: src/emc/usr_intf/pncconf/pncconf.glade:1649 #: src/emc/usr_intf/pncconf/pncconf.glade:1780 #: src/emc/usr_intf/pncconf/pncconf.glade:2690 #: src/emc/usr_intf/pncconf/pncconf.glade:3571 #: src/emc/usr_intf/pncconf/pncconf.glade:4452 #: src/emc/usr_intf/pncconf/pncconf.glade:5333 #: src/emc/usr_intf/pncconf/pncconf.glade:57371 msgid "Details" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1667 msgid "USB Joystick Jogging " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1711 msgid "shared buttons for all axis" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1724 #, fuzzy msgid "buttons for each axis" msgstr "Vierte Achse verfahren" #: src/emc/usr_intf/pncconf/pncconf.glade:1798 msgid "External Button Jogging" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1839 msgid "Shared MPG / selectable axis" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1852 #, fuzzy msgid "Mpg per axis" msgstr "Erste Achse verfahren" #: src/emc/usr_intf/pncconf/pncconf.glade:1867 #, fuzzy msgid "selectable MPG increments" msgstr "Schrittweite auswählen" #: src/emc/usr_intf/pncconf/pncconf.glade:1932 #: src/emc/usr_intf/pncconf/pncconf.glade:2907 #: src/emc/usr_intf/pncconf/pncconf.glade:3788 #: src/emc/usr_intf/pncconf/pncconf.glade:4669 #, fuzzy msgid "Mux options" msgstr "Achssteuerung" #: src/emc/usr_intf/pncconf/pncconf.glade:1980 #: src/emc/usr_intf/pncconf/pncconf.glade:2868 #: src/emc/usr_intf/pncconf/pncconf.glade:3763 #: src/emc/usr_intf/pncconf/pncconf.glade:4644 msgid "use debounce" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:1995 msgid "use gray code" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2010 msgid "ignore all inputs false" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2035 #: src/emc/usr_intf/pncconf/pncconf.glade:2048 #: src/emc/usr_intf/pncconf/pncconf.glade:2061 #: src/emc/usr_intf/pncconf/pncconf.glade:2407 #: src/emc/usr_intf/pncconf/pncconf.glade:2420 #: src/emc/usr_intf/pncconf/pncconf.glade:2433 #: src/emc/usr_intf/pncconf/pncconf.glade:2446 #: src/emc/usr_intf/pncconf/pncconf.glade:2457 #: src/emc/usr_intf/pncconf/pncconf.glade:2470 #: src/emc/usr_intf/pncconf/pncconf.glade:2483 #: src/emc/usr_intf/pncconf/pncconf.glade:2496 #: src/emc/usr_intf/pncconf/pncconf.glade:2509 #: src/emc/usr_intf/pncconf/pncconf.glade:2522 #: src/emc/usr_intf/pncconf/pncconf.glade:2535 #: src/emc/usr_intf/pncconf/pncconf.glade:8343 #: src/emc/usr_intf/pncconf/pncconf.glade:8379 #: src/emc/usr_intf/pncconf/pncconf.glade:56542 #: src/emc/usr_intf/pncconf/pncconf.glade:61266 #: src/emc/usr_intf/pncconf/pncconf.glade:61278 #: src/emc/usr_intf/pncconf/pncconf.glade:61290 #: src/emc/usr_intf/pncconf/pncconf.glade:61302 #: src/emc/usr_intf/pncconf/pncconf.glade:62475 #: src/emc/usr_intf/pncconf/pncconf.glade:62487 #: src/emc/usr_intf/pncconf/pncconf.glade:62499 #: src/emc/usr_intf/pncconf/pncconf.glade:62511 #: src/emc/usr_intf/pncconf/pncconf.glade:63452 #: src/emc/usr_intf/pncconf/pncconf.glade:63464 #: src/emc/usr_intf/pncconf/pncconf.glade:63476 #: src/emc/usr_intf/pncconf/pncconf.glade:63488 #: src/emc/usr_intf/pncconf/pncconf.glade:64661 #: src/emc/usr_intf/pncconf/pncconf.glade:64673 #: src/emc/usr_intf/pncconf/pncconf.glade:64685 #: src/emc/usr_intf/pncconf/pncconf.glade:64697 #: src/emc/usr_intf/pncconf/pncconf.glade:65608 #: src/emc/usr_intf/pncconf/pncconf.glade:65620 #: src/emc/usr_intf/pncconf/pncconf.glade:65632 #: src/emc/usr_intf/pncconf/pncconf.glade:65644 #: emc/usr_intf/pncconf/pncconf.glade:14765 #: emc/usr_intf/pncconf/pncconf.glade:16996 #: emc/usr_intf/pncconf/pncconf.glade:21120 #: emc/usr_intf/pncconf/pncconf.glade:21132 #: emc/usr_intf/pncconf/pncconf.glade:21144 #: emc/usr_intf/pncconf/pncconf.glade:21156 msgid "label" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2073 #: src/emc/usr_intf/pncconf/pncconf.glade:2559 #: src/emc/usr_intf/pncconf/pncconf.glade:3300 #: src/emc/usr_intf/pncconf/pncconf.glade:4181 #: src/emc/usr_intf/pncconf/pncconf.glade:5062 msgid " abc)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2086 #: src/emc/usr_intf/pncconf/pncconf.glade:3422 #: src/emc/usr_intf/pncconf/pncconf.glade:4303 #: src/emc/usr_intf/pncconf/pncconf.glade:5184 msgid " ab)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2372 #: src/emc/usr_intf/pncconf/pncconf.glade:3321 #: src/emc/usr_intf/pncconf/pncconf.glade:4202 #: src/emc/usr_intf/pncconf/pncconf.glade:5083 msgid " ac)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2383 #: src/emc/usr_intf/pncconf/pncconf.glade:3311 #: src/emc/usr_intf/pncconf/pncconf.glade:4192 #: src/emc/usr_intf/pncconf/pncconf.glade:5073 msgid " bc)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2547 #: src/emc/usr_intf/pncconf/pncconf.glade:3332 #: src/emc/usr_intf/pncconf/pncconf.glade:4213 #: src/emc/usr_intf/pncconf/pncconf.glade:5094 #, fuzzy msgid " c)" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/pncconf/pncconf.glade:2570 #: src/emc/usr_intf/pncconf/pncconf.glade:2966 #: src/emc/usr_intf/pncconf/pncconf.glade:3847 #: src/emc/usr_intf/pncconf/pncconf.glade:4728 msgid " ad)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2583 #: src/emc/usr_intf/pncconf/pncconf.glade:2953 #: src/emc/usr_intf/pncconf/pncconf.glade:3834 #: src/emc/usr_intf/pncconf/pncconf.glade:4715 msgid " bd)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2596 #: src/emc/usr_intf/pncconf/pncconf.glade:2927 #: src/emc/usr_intf/pncconf/pncconf.glade:3808 #: src/emc/usr_intf/pncconf/pncconf.glade:4689 msgid " cd)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2609 #: src/emc/usr_intf/pncconf/pncconf.glade:2991 #: src/emc/usr_intf/pncconf/pncconf.glade:3872 #: src/emc/usr_intf/pncconf/pncconf.glade:4753 msgid " acd)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2622 #: src/emc/usr_intf/pncconf/pncconf.glade:3004 #: src/emc/usr_intf/pncconf/pncconf.glade:3885 #: src/emc/usr_intf/pncconf/pncconf.glade:4766 msgid " bcd)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2635 #: src/emc/usr_intf/pncconf/pncconf.glade:3017 #: src/emc/usr_intf/pncconf/pncconf.glade:3898 #: src/emc/usr_intf/pncconf/pncconf.glade:4779 msgid " abcd)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2648 #: src/emc/usr_intf/pncconf/pncconf.glade:2979 #: src/emc/usr_intf/pncconf/pncconf.glade:3860 #: src/emc/usr_intf/pncconf/pncconf.glade:4741 #, fuzzy msgid " d)" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/pncconf/pncconf.glade:2664 #, fuzzy msgid "increments" msgstr "Inkrementell" #: src/emc/usr_intf/pncconf/pncconf.glade:2708 msgid "External MPG Jogging" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2739 #: src/emc/usr_intf/pncconf/pncconf.glade:3620 #: src/emc/usr_intf/pncconf/pncconf.glade:4501 msgid "Use MPG " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2752 #: src/emc/usr_intf/pncconf/pncconf.glade:3633 #: src/emc/usr_intf/pncconf/pncconf.glade:4514 msgid "use switches" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2838 #: src/emc/usr_intf/pncconf/pncconf.glade:3733 #: src/emc/usr_intf/pncconf/pncconf.glade:4614 msgid "ignore all-inputs false" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:2853 #: src/emc/usr_intf/pncconf/pncconf.glade:3748 #: src/emc/usr_intf/pncconf/pncconf.glade:4629 #, fuzzy msgid "use graycode" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.glade:2940 #: src/emc/usr_intf/pncconf/pncconf.glade:3821 #: src/emc/usr_intf/pncconf/pncconf.glade:4702 msgid " abd)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:3555 #: src/emc/usr_intf/pncconf/pncconf.glade:4436 #: src/emc/usr_intf/pncconf/pncconf.glade:5317 #, fuzzy msgid "Increments" msgstr "Intervall" #: src/emc/usr_intf/pncconf/pncconf.glade:3589 #, fuzzy msgid "External Feed Override" msgstr "Vorschubübersteuerung" #: src/emc/usr_intf/pncconf/pncconf.glade:4470 msgid "Max Velocity Override" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:5351 #, fuzzy msgid "External Spindle Override" msgstr "Spindelübersteuerung" #: src/emc/usr_intf/pncconf/pncconf.glade:5379 #: emc/usr_intf/pncconf/pncconf.glade:1066 #, fuzzy msgid "GUI configuration" msgstr "HAL konfigurieren" #: src/emc/usr_intf/pncconf/pncconf.glade:5398 #: emc/usr_intf/pncconf/pncconf.glade:1085 msgid "Frontend" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:5557 #, fuzzy msgid "" "Commanded\n" "Actual" msgstr "erwartet" #: src/emc/usr_intf/pncconf/pncconf.glade:5570 #, fuzzy msgid "" "Machine\n" "Relative\n" msgstr "relativ" #: src/emc/usr_intf/pncconf/pncconf.glade:5608 #, fuzzy msgid "Max Feed Override" msgstr "Vorschubübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.glade:5667 #, fuzzy msgid "Min Spindle Override" msgstr "Spindelübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.glade:5691 #, fuzzy msgid "Max Spindle Override " msgstr "Spindelübersteuerung:" #: src/emc/usr_intf/pncconf/pncconf.glade:5702 #, fuzzy msgid "Position_feedback" msgstr "Position:" #: src/emc/usr_intf/pncconf/pncconf.glade:5713 #, fuzzy msgid "Position_offset" msgstr "Position:" #: src/emc/usr_intf/pncconf/pncconf.glade:5721 msgid "General GUI Defaults" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:5808 msgid "Force Axis to Maximize" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:5832 #: src/emc/usr_intf/pncconf/pncconf.glade:6602 #: src/emc/usr_intf/pncconf/pncconf.glade:6841 #: src/emc/usr_intf/pncconf/pncconf.glade:7328 #: emc/usr_intf/pncconf/pncconf.glade:1427 #, fuzzy msgid "H" msgstr "Hz" #: src/emc/usr_intf/pncconf/pncconf.glade:5866 #: src/emc/usr_intf/pncconf/pncconf.glade:6568 #: src/emc/usr_intf/pncconf/pncconf.glade:6875 #: src/emc/usr_intf/pncconf/pncconf.glade:7294 #: emc/usr_intf/pncconf/pncconf.glade:1393 msgid "W" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:5876 #: src/emc/usr_intf/pncconf/pncconf.glade:6556 #: src/emc/usr_intf/pncconf/pncconf.glade:6885 #: src/emc/usr_intf/pncconf/pncconf.glade:7282 #: emc/usr_intf/pncconf/pncconf.glade:1381 msgid "X" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:5914 #: src/emc/usr_intf/pncconf/pncconf.glade:6519 #: src/emc/usr_intf/pncconf/pncconf.glade:6923 #: src/emc/usr_intf/pncconf/pncconf.glade:7244 #: emc/usr_intf/pncconf/pncconf.glade:1344 #, fuzzy msgid "Position" msgstr "Position:" #: src/emc/usr_intf/pncconf/pncconf.glade:5927 #: src/emc/usr_intf/pncconf/pncconf.glade:6510 #: src/emc/usr_intf/pncconf/pncconf.glade:6936 #: src/emc/usr_intf/pncconf/pncconf.glade:7234 #: emc/usr_intf/pncconf/pncconf.glade:1335 #, fuzzy msgid "size" msgstr "Größe" #: src/emc/usr_intf/pncconf/pncconf.glade:5942 #: src/emc/usr_intf/pncconf/pncconf.glade:5952 #: src/emc/usr_intf/pncconf/pncconf.glade:6158 #: emc/usr_intf/pncconf/pncconf.py:3305 emc/usr_intf/pncconf/pncconf.py:3307 #: emc/usr_intf/pncconf/pncconf.py:3308 emc/usr_intf/pncconf/pncconf.py:3309 #, fuzzy msgid "mm / min" msgstr "mm / s" #: src/emc/usr_intf/pncconf/pncconf.glade:5975 #: src/emc/usr_intf/pncconf/pncconf.glade:5985 #: src/emc/usr_intf/pncconf/pncconf.glade:5997 #, fuzzy msgid "Deg / min" msgstr "Grad / Umdrehung" #: src/emc/usr_intf/pncconf/pncconf.glade:6010 msgid "xyzabc" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6023 msgid "Axis Geometry" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6048 #, fuzzy msgid "Max Angular velocity" msgstr "Maximale Geschwindigkeit:" #: src/emc/usr_intf/pncconf/pncconf.glade:6061 msgid "5mm 1mm .5mm .1mm .05mm .01mm .005mm" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6074 #, fuzzy msgid "Increments " msgstr "Intervall" #: src/emc/usr_intf/pncconf/pncconf.glade:6099 #, fuzzy msgid "Min Angular velocity" msgstr "Maximale Geschwindigkeit:" #: src/emc/usr_intf/pncconf/pncconf.glade:6112 msgid "gedit" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6148 msgid "Default Angular velocity " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6211 #, fuzzy msgid "Max linear velocity" msgstr "Maximale Geschwindigkeit:" #: src/emc/usr_intf/pncconf/pncconf.glade:6222 #, fuzzy msgid "Min linear velocity" msgstr "Gesch_windigkeit Referenzfahrt:" #: src/emc/usr_intf/pncconf/pncconf.glade:6233 #, fuzzy msgid "Default linear velocity " msgstr "Gesch_windigkeit Referenzfahrt:" #: src/emc/usr_intf/pncconf/pncconf.glade:6241 #, fuzzy msgid "AXIS defaults" msgstr "Benutzen der Standartwerte" #: src/emc/usr_intf/pncconf/pncconf.glade:6352 msgid "Error Textcolor" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6365 msgid "DTG Textcolor" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6378 #, fuzzy msgid "Relative Textcolor" msgstr "Relative Position" #: src/emc/usr_intf/pncconf/pncconf.glade:6391 msgid "Absolute Textcolor" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6454 msgid "Absolute Text Color" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6479 #: src/emc/usr_intf/pncconf/pncconf.glade:7148 msgid "GTK Theme" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6491 #: src/emc/usr_intf/pncconf/pncconf.glade:7158 msgid "Follow System Theme\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6624 msgid "Force Touchy to Maximize after positioning" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6669 #, fuzzy msgid "GUI Options" msgstr "SPS-Optionen" #: src/emc/usr_intf/pncconf/pncconf.glade:6700 msgid "Virtual Control Panel" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:6775 #: emc/usr_intf/pncconf/pncconf.glade:1279 #, fuzzy msgid "XYZ buttons (uses Halui)" msgstr "_XYZ-Buttons (benutzt HalUI)" #: src/emc/usr_intf/pncconf/pncconf.glade:6946 #: emc/usr_intf/pncconf/pncconf.glade:1450 msgid "Geometry Options" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7025 msgid "Pyvcp Details" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7097 msgid "Sample display " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7172 msgid "Force Maximize" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7186 msgid "Center Tab Embeded" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7201 msgid "Rightside Embeded" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7217 msgid "Standalone Panel" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7351 #, fuzzy msgid "Display Options" msgstr "_Inch" #: src/emc/usr_intf/pncconf/pncconf.glade:7401 msgid "Max RPM" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7414 #, fuzzy msgid "Spindle Speed Indicator" msgstr "Spindeldrehzahl (1/min)" #: src/emc/usr_intf/pncconf/pncconf.glade:7426 #, fuzzy msgid "Spindle At Speed LED" msgstr "Spindeldrehzahl (1/min)" #: src/emc/usr_intf/pncconf/pncconf.glade:7438 #, fuzzy msgid "Zero X Button" msgstr "Linke Maustaste" #: src/emc/usr_intf/pncconf/pncconf.glade:7450 #, fuzzy msgid "Zero Y Button" msgstr "Linke Maustaste" #: src/emc/usr_intf/pncconf/pncconf.glade:7462 #, fuzzy msgid "Zero Z Button" msgstr "Linke Maustaste" #: src/emc/usr_intf/pncconf/pncconf.glade:7474 #, fuzzy msgid "Zero A Button" msgstr "Linke Maustaste" #: src/emc/usr_intf/pncconf/pncconf.glade:7486 msgid "Requires Classicladder touch-off program" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7487 msgid "Auto Z Touch Off Button" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7500 #, fuzzy msgid "Sample Options" msgstr "PyVCP-Beispiele" #: src/emc/usr_intf/pncconf/pncconf.glade:7574 msgid "Gladevcp Details" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7597 #, fuzzy msgid "Include custom GladeVCP GUI panel" msgstr "Benutzerdefiniertes PyVCP-Panel einbinden" #: src/emc/usr_intf/pncconf/pncconf.glade:7668 msgid "Restore joint position after shutdown" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7683 #, fuzzy msgid "Move spindle up before tool change" msgstr "_Bildschirmmitteilung bei Werkzeugwechsel" #: src/emc/usr_intf/pncconf/pncconf.glade:7696 msgid "Leave spindle on during tool change" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7709 msgid "Popup Toolchange Prompt" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7723 msgid "Require homing before MDI / Running" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7732 msgid "Random position toolchanger " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7747 msgid "Force individual manual homing" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7761 msgid "Defaults and Options" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7789 msgid "Mesa0 I/O setup\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7809 msgid "" "Click on each page tab to configure signal names for each connector port.\n" "\n" "Press the button to make the tabbed pages\n" "accept the changes.\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:7998 #, fuzzy msgid "Num of channels: " msgstr "Nicht genügend Kanäle" #: src/emc/usr_intf/pncconf/pncconf.glade:8036 msgid "7i29 daughter board" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8045 msgid "7i30 daughter board" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8057 msgid "7i33 daughter board" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8069 msgid "7i40 daughter board" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8081 msgid "7i48 daughter board" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8096 msgid "Sanity Checks" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8137 msgid "Num of Smart Serial Ports:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8148 #: emc/usr_intf/pncconf/pncconf.glade:1775 #, fuzzy msgid "Board name" msgstr "World-Modus" #: src/emc/usr_intf/pncconf/pncconf.glade:8155 #: emc/usr_intf/pncconf/pncconf.glade:1902 msgid "Num of step generators: " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8166 #: emc/usr_intf/pncconf/pncconf.glade:1913 msgid "Num of pwm generators:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8177 #: emc/usr_intf/pncconf/pncconf.glade:1924 msgid "Num of encoders:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8294 #: emc/usr_intf/pncconf/pncconf.glade:1935 msgid "Watchdog timeout:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8305 #: emc/usr_intf/pncconf/pncconf.glade:1946 msgid "PDM base frequency:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8316 #: emc/usr_intf/pncconf/pncconf.glade:1727 msgid "PWM base frequency:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8328 #: emc/usr_intf/pncconf/pncconf.glade:1795 msgid "" "Accept components\n" " Changes" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8356 msgid "Total number of pins:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8389 msgid "Num of 3 pwm generators: " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8412 #: emc/usr_intf/pncconf/pncconf.glade:1737 msgid "SVST8_4" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8437 #: emc/usr_intf/pncconf/pncconf.glade:1751 msgid "Firmware:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8447 #, fuzzy msgid "Mesa parport address:" msgstr "Adresse der ersten _parallelen Schnittstelle:" #: src/emc/usr_intf/pncconf/pncconf.glade:8482 msgid "3PWM base frequency:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8504 #: emc/usr_intf/pncconf/pncconf.glade:1993 #, fuzzy msgid "" "Configuration\n" " Page" msgstr "Konfiguration *" #: src/emc/usr_intf/pncconf/pncconf.glade:8698 #: src/emc/usr_intf/pncconf/pncconf.glade:8712 #: src/emc/usr_intf/pncconf/pncconf.glade:13677 #: src/emc/usr_intf/pncconf/pncconf.glade:13689 #: src/emc/usr_intf/pncconf/pncconf.glade:16373 #: src/emc/usr_intf/pncconf/pncconf.glade:16385 #: src/emc/usr_intf/pncconf/pncconf.glade:18883 #: src/emc/usr_intf/pncconf/pncconf.glade:18895 #: src/emc/usr_intf/pncconf/pncconf.glade:20747 #: src/emc/usr_intf/pncconf/pncconf.glade:20759 #: src/emc/usr_intf/pncconf/pncconf.glade:20962 #: src/emc/usr_intf/pncconf/pncconf.glade:20976 #: src/emc/usr_intf/pncconf/pncconf.glade:22758 #: src/emc/usr_intf/pncconf/pncconf.glade:22772 #: src/emc/usr_intf/pncconf/pncconf.glade:24554 #: src/emc/usr_intf/pncconf/pncconf.glade:24568 #: src/emc/usr_intf/pncconf/pncconf.glade:26330 #: src/emc/usr_intf/pncconf/pncconf.glade:26344 #: src/emc/usr_intf/pncconf/pncconf.glade:31324 #: src/emc/usr_intf/pncconf/pncconf.glade:31336 #: src/emc/usr_intf/pncconf/pncconf.glade:31600 #: src/emc/usr_intf/pncconf/pncconf.glade:35669 #: src/emc/usr_intf/pncconf/pncconf.glade:35681 #: src/emc/usr_intf/pncconf/pncconf.glade:35814 #: src/emc/usr_intf/pncconf/pncconf.glade:35828 #: src/emc/usr_intf/pncconf/pncconf.glade:40000 #: src/emc/usr_intf/pncconf/pncconf.glade:40012 #: src/emc/usr_intf/pncconf/pncconf.glade:40174 #: src/emc/usr_intf/pncconf/pncconf.glade:40188 #: src/emc/usr_intf/pncconf/pncconf.glade:45168 #: src/emc/usr_intf/pncconf/pncconf.glade:45180 #: src/emc/usr_intf/pncconf/pncconf.glade:45431 #: src/emc/usr_intf/pncconf/pncconf.glade:45445 #: src/emc/usr_intf/pncconf/pncconf.glade:47097 #: src/emc/usr_intf/pncconf/pncconf.glade:47111 #: src/emc/usr_intf/pncconf/pncconf.glade:52091 #: src/emc/usr_intf/pncconf/pncconf.glade:52103 #: src/emc/usr_intf/pncconf/pncconf.glade:52354 #: src/emc/usr_intf/pncconf/pncconf.glade:52368 msgid "Num" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:8723 #: src/emc/usr_intf/pncconf/pncconf.glade:8743 #: src/emc/usr_intf/pncconf/pncconf.glade:8763 #: src/emc/usr_intf/pncconf/pncconf.glade:8783 #: src/emc/usr_intf/pncconf/pncconf.glade:8803 #: src/emc/usr_intf/pncconf/pncconf.glade:8823 #: src/emc/usr_intf/pncconf/pncconf.glade:8843 #: src/emc/usr_intf/pncconf/pncconf.glade:8863 #: src/emc/usr_intf/pncconf/pncconf.glade:8883 #: src/emc/usr_intf/pncconf/pncconf.glade:8903 #: src/emc/usr_intf/pncconf/pncconf.glade:8923 #: src/emc/usr_intf/pncconf/pncconf.glade:8943 #: src/emc/usr_intf/pncconf/pncconf.glade:8963 #: src/emc/usr_intf/pncconf/pncconf.glade:8983 #: src/emc/usr_intf/pncconf/pncconf.glade:9003 #: src/emc/usr_intf/pncconf/pncconf.glade:9023 #: src/emc/usr_intf/pncconf/pncconf.glade:9043 #: src/emc/usr_intf/pncconf/pncconf.glade:9063 #: src/emc/usr_intf/pncconf/pncconf.glade:9083 #: src/emc/usr_intf/pncconf/pncconf.glade:9103 #: src/emc/usr_intf/pncconf/pncconf.glade:9123 #: src/emc/usr_intf/pncconf/pncconf.glade:9143 #: src/emc/usr_intf/pncconf/pncconf.glade:9163 #: src/emc/usr_intf/pncconf/pncconf.glade:11027 #: src/emc/usr_intf/pncconf/pncconf.glade:11353 #: src/emc/usr_intf/pncconf/pncconf.glade:13216 #: src/emc/usr_intf/pncconf/pncconf.glade:13236 #: src/emc/usr_intf/pncconf/pncconf.glade:13256 #: src/emc/usr_intf/pncconf/pncconf.glade:13276 #: src/emc/usr_intf/pncconf/pncconf.glade:13296 #: src/emc/usr_intf/pncconf/pncconf.glade:13316 #: src/emc/usr_intf/pncconf/pncconf.glade:13336 #: src/emc/usr_intf/pncconf/pncconf.glade:13356 #: src/emc/usr_intf/pncconf/pncconf.glade:13376 #: src/emc/usr_intf/pncconf/pncconf.glade:13396 #: src/emc/usr_intf/pncconf/pncconf.glade:13416 #: src/emc/usr_intf/pncconf/pncconf.glade:13436 #: src/emc/usr_intf/pncconf/pncconf.glade:13456 #: src/emc/usr_intf/pncconf/pncconf.glade:13476 #: src/emc/usr_intf/pncconf/pncconf.glade:13496 #: src/emc/usr_intf/pncconf/pncconf.glade:13516 #: src/emc/usr_intf/pncconf/pncconf.glade:13536 #: src/emc/usr_intf/pncconf/pncconf.glade:13556 #: src/emc/usr_intf/pncconf/pncconf.glade:13576 #: src/emc/usr_intf/pncconf/pncconf.glade:13596 #: src/emc/usr_intf/pncconf/pncconf.glade:13616 #: src/emc/usr_intf/pncconf/pncconf.glade:13636 #: src/emc/usr_intf/pncconf/pncconf.glade:13656 #: src/emc/usr_intf/pncconf/pncconf.glade:13966 #: src/emc/usr_intf/pncconf/pncconf.glade:15912 #: src/emc/usr_intf/pncconf/pncconf.glade:15932 #: src/emc/usr_intf/pncconf/pncconf.glade:15952 #: src/emc/usr_intf/pncconf/pncconf.glade:15972 #: src/emc/usr_intf/pncconf/pncconf.glade:15992 #: src/emc/usr_intf/pncconf/pncconf.glade:16012 #: src/emc/usr_intf/pncconf/pncconf.glade:16032 #: src/emc/usr_intf/pncconf/pncconf.glade:16052 #: src/emc/usr_intf/pncconf/pncconf.glade:16072 #: src/emc/usr_intf/pncconf/pncconf.glade:16092 #: src/emc/usr_intf/pncconf/pncconf.glade:16112 #: src/emc/usr_intf/pncconf/pncconf.glade:16132 #: src/emc/usr_intf/pncconf/pncconf.glade:16152 #: src/emc/usr_intf/pncconf/pncconf.glade:16172 #: src/emc/usr_intf/pncconf/pncconf.glade:16192 #: src/emc/usr_intf/pncconf/pncconf.glade:16212 #: src/emc/usr_intf/pncconf/pncconf.glade:16232 #: src/emc/usr_intf/pncconf/pncconf.glade:16252 #: src/emc/usr_intf/pncconf/pncconf.glade:16272 #: src/emc/usr_intf/pncconf/pncconf.glade:16292 #: src/emc/usr_intf/pncconf/pncconf.glade:16312 #: src/emc/usr_intf/pncconf/pncconf.glade:16332 #: src/emc/usr_intf/pncconf/pncconf.glade:16352 #: src/emc/usr_intf/pncconf/pncconf.glade:16558 #: src/emc/usr_intf/pncconf/pncconf.glade:18422 #: src/emc/usr_intf/pncconf/pncconf.glade:18442 #: src/emc/usr_intf/pncconf/pncconf.glade:18462 #: src/emc/usr_intf/pncconf/pncconf.glade:18482 #: src/emc/usr_intf/pncconf/pncconf.glade:18502 #: src/emc/usr_intf/pncconf/pncconf.glade:18522 #: src/emc/usr_intf/pncconf/pncconf.glade:18542 #: src/emc/usr_intf/pncconf/pncconf.glade:18562 #: src/emc/usr_intf/pncconf/pncconf.glade:18582 #: src/emc/usr_intf/pncconf/pncconf.glade:18602 #: src/emc/usr_intf/pncconf/pncconf.glade:18622 #: src/emc/usr_intf/pncconf/pncconf.glade:18642 #: src/emc/usr_intf/pncconf/pncconf.glade:18662 #: src/emc/usr_intf/pncconf/pncconf.glade:18682 #: src/emc/usr_intf/pncconf/pncconf.glade:18702 #: src/emc/usr_intf/pncconf/pncconf.glade:18722 #: src/emc/usr_intf/pncconf/pncconf.glade:18742 #: src/emc/usr_intf/pncconf/pncconf.glade:18762 #: src/emc/usr_intf/pncconf/pncconf.glade:18782 #: src/emc/usr_intf/pncconf/pncconf.glade:18802 #: src/emc/usr_intf/pncconf/pncconf.glade:18822 #: src/emc/usr_intf/pncconf/pncconf.glade:18842 #: src/emc/usr_intf/pncconf/pncconf.glade:18862 #: src/emc/usr_intf/pncconf/pncconf.glade:26355 #: src/emc/usr_intf/pncconf/pncconf.glade:26375 #: src/emc/usr_intf/pncconf/pncconf.glade:26395 #: src/emc/usr_intf/pncconf/pncconf.glade:26415 #: src/emc/usr_intf/pncconf/pncconf.glade:26435 #: src/emc/usr_intf/pncconf/pncconf.glade:26455 #: src/emc/usr_intf/pncconf/pncconf.glade:26475 #: src/emc/usr_intf/pncconf/pncconf.glade:26495 #: src/emc/usr_intf/pncconf/pncconf.glade:26515 #: src/emc/usr_intf/pncconf/pncconf.glade:26535 #: src/emc/usr_intf/pncconf/pncconf.glade:26555 #: src/emc/usr_intf/pncconf/pncconf.glade:26575 #: src/emc/usr_intf/pncconf/pncconf.glade:26595 #: src/emc/usr_intf/pncconf/pncconf.glade:26615 #: src/emc/usr_intf/pncconf/pncconf.glade:26635 #: src/emc/usr_intf/pncconf/pncconf.glade:26655 #: src/emc/usr_intf/pncconf/pncconf.glade:26675 #: src/emc/usr_intf/pncconf/pncconf.glade:26695 #: src/emc/usr_intf/pncconf/pncconf.glade:26715 #: src/emc/usr_intf/pncconf/pncconf.glade:26735 #: src/emc/usr_intf/pncconf/pncconf.glade:26755 #: src/emc/usr_intf/pncconf/pncconf.glade:26775 #: src/emc/usr_intf/pncconf/pncconf.glade:26795 #: src/emc/usr_intf/pncconf/pncconf.glade:28711 #: src/emc/usr_intf/pncconf/pncconf.glade:28934 #: src/emc/usr_intf/pncconf/pncconf.glade:30863 #: src/emc/usr_intf/pncconf/pncconf.glade:30883 #: src/emc/usr_intf/pncconf/pncconf.glade:30903 #: src/emc/usr_intf/pncconf/pncconf.glade:30923 #: src/emc/usr_intf/pncconf/pncconf.glade:30943 #: src/emc/usr_intf/pncconf/pncconf.glade:30963 #: src/emc/usr_intf/pncconf/pncconf.glade:30983 #: src/emc/usr_intf/pncconf/pncconf.glade:31003 #: src/emc/usr_intf/pncconf/pncconf.glade:31023 #: src/emc/usr_intf/pncconf/pncconf.glade:31043 #: src/emc/usr_intf/pncconf/pncconf.glade:31063 #: src/emc/usr_intf/pncconf/pncconf.glade:31083 #: src/emc/usr_intf/pncconf/pncconf.glade:31103 #: src/emc/usr_intf/pncconf/pncconf.glade:31123 #: src/emc/usr_intf/pncconf/pncconf.glade:31143 #: src/emc/usr_intf/pncconf/pncconf.glade:31163 #: src/emc/usr_intf/pncconf/pncconf.glade:31183 #: src/emc/usr_intf/pncconf/pncconf.glade:31203 #: src/emc/usr_intf/pncconf/pncconf.glade:31223 #: src/emc/usr_intf/pncconf/pncconf.glade:31243 #: src/emc/usr_intf/pncconf/pncconf.glade:31263 #: src/emc/usr_intf/pncconf/pncconf.glade:31283 #: src/emc/usr_intf/pncconf/pncconf.glade:31303 #: src/emc/usr_intf/pncconf/pncconf.glade:31611 #: src/emc/usr_intf/pncconf/pncconf.glade:31631 #: src/emc/usr_intf/pncconf/pncconf.glade:31651 #: src/emc/usr_intf/pncconf/pncconf.glade:31671 #: src/emc/usr_intf/pncconf/pncconf.glade:31691 #: src/emc/usr_intf/pncconf/pncconf.glade:31711 #: src/emc/usr_intf/pncconf/pncconf.glade:31731 #: src/emc/usr_intf/pncconf/pncconf.glade:31751 #: src/emc/usr_intf/pncconf/pncconf.glade:31771 #: src/emc/usr_intf/pncconf/pncconf.glade:31791 #: src/emc/usr_intf/pncconf/pncconf.glade:31811 #: src/emc/usr_intf/pncconf/pncconf.glade:33029 #: src/emc/usr_intf/pncconf/pncconf.glade:33292 #: src/emc/usr_intf/pncconf/pncconf.glade:35208 #: src/emc/usr_intf/pncconf/pncconf.glade:35228 #: src/emc/usr_intf/pncconf/pncconf.glade:35248 #: src/emc/usr_intf/pncconf/pncconf.glade:35268 #: src/emc/usr_intf/pncconf/pncconf.glade:35288 #: src/emc/usr_intf/pncconf/pncconf.glade:35308 #: src/emc/usr_intf/pncconf/pncconf.glade:35328 #: src/emc/usr_intf/pncconf/pncconf.glade:35348 #: src/emc/usr_intf/pncconf/pncconf.glade:35368 #: src/emc/usr_intf/pncconf/pncconf.glade:35388 #: src/emc/usr_intf/pncconf/pncconf.glade:35408 #: src/emc/usr_intf/pncconf/pncconf.glade:35428 #: src/emc/usr_intf/pncconf/pncconf.glade:35448 #: src/emc/usr_intf/pncconf/pncconf.glade:35468 #: src/emc/usr_intf/pncconf/pncconf.glade:35488 #: src/emc/usr_intf/pncconf/pncconf.glade:35508 #: src/emc/usr_intf/pncconf/pncconf.glade:35528 #: src/emc/usr_intf/pncconf/pncconf.glade:35548 #: src/emc/usr_intf/pncconf/pncconf.glade:35568 #: src/emc/usr_intf/pncconf/pncconf.glade:35588 #: src/emc/usr_intf/pncconf/pncconf.glade:35608 #: src/emc/usr_intf/pncconf/pncconf.glade:35628 #: src/emc/usr_intf/pncconf/pncconf.glade:35648 #: src/emc/usr_intf/pncconf/pncconf.glade:35839 #: src/emc/usr_intf/pncconf/pncconf.glade:35859 #: src/emc/usr_intf/pncconf/pncconf.glade:35879 #: src/emc/usr_intf/pncconf/pncconf.glade:35899 #: src/emc/usr_intf/pncconf/pncconf.glade:35919 #: src/emc/usr_intf/pncconf/pncconf.glade:35939 #: src/emc/usr_intf/pncconf/pncconf.glade:35959 #: src/emc/usr_intf/pncconf/pncconf.glade:35979 #: src/emc/usr_intf/pncconf/pncconf.glade:35999 #: src/emc/usr_intf/pncconf/pncconf.glade:36019 #: src/emc/usr_intf/pncconf/pncconf.glade:36039 #: src/emc/usr_intf/pncconf/pncconf.glade:36059 #: src/emc/usr_intf/pncconf/pncconf.glade:36079 #: src/emc/usr_intf/pncconf/pncconf.glade:36099 #: src/emc/usr_intf/pncconf/pncconf.glade:36119 #: src/emc/usr_intf/pncconf/pncconf.glade:36139 #: src/emc/usr_intf/pncconf/pncconf.glade:36159 #: src/emc/usr_intf/pncconf/pncconf.glade:36179 #: src/emc/usr_intf/pncconf/pncconf.glade:36199 #: src/emc/usr_intf/pncconf/pncconf.glade:36219 #: src/emc/usr_intf/pncconf/pncconf.glade:36239 #: src/emc/usr_intf/pncconf/pncconf.glade:36259 #: src/emc/usr_intf/pncconf/pncconf.glade:36279 #: src/emc/usr_intf/pncconf/pncconf.glade:38208 #: src/emc/usr_intf/pncconf/pncconf.glade:38549 #: src/emc/usr_intf/pncconf/pncconf.glade:39779 #: src/emc/usr_intf/pncconf/pncconf.glade:39799 #: src/emc/usr_intf/pncconf/pncconf.glade:39819 #: src/emc/usr_intf/pncconf/pncconf.glade:39839 #: src/emc/usr_intf/pncconf/pncconf.glade:39859 #: src/emc/usr_intf/pncconf/pncconf.glade:39879 #: src/emc/usr_intf/pncconf/pncconf.glade:39899 #: src/emc/usr_intf/pncconf/pncconf.glade:39919 #: src/emc/usr_intf/pncconf/pncconf.glade:39939 #: src/emc/usr_intf/pncconf/pncconf.glade:39959 #: src/emc/usr_intf/pncconf/pncconf.glade:39979 #: src/emc/usr_intf/pncconf/pncconf.glade:40199 #: src/emc/usr_intf/pncconf/pncconf.glade:40219 #: src/emc/usr_intf/pncconf/pncconf.glade:40239 #: src/emc/usr_intf/pncconf/pncconf.glade:40259 #: src/emc/usr_intf/pncconf/pncconf.glade:40279 #: src/emc/usr_intf/pncconf/pncconf.glade:40299 #: src/emc/usr_intf/pncconf/pncconf.glade:40319 #: src/emc/usr_intf/pncconf/pncconf.glade:40339 #: src/emc/usr_intf/pncconf/pncconf.glade:40359 #: src/emc/usr_intf/pncconf/pncconf.glade:40379 #: src/emc/usr_intf/pncconf/pncconf.glade:40399 #: src/emc/usr_intf/pncconf/pncconf.glade:40419 #: src/emc/usr_intf/pncconf/pncconf.glade:40439 #: src/emc/usr_intf/pncconf/pncconf.glade:40459 #: src/emc/usr_intf/pncconf/pncconf.glade:40479 #: src/emc/usr_intf/pncconf/pncconf.glade:40499 #: src/emc/usr_intf/pncconf/pncconf.glade:40519 #: src/emc/usr_intf/pncconf/pncconf.glade:40539 #: src/emc/usr_intf/pncconf/pncconf.glade:40559 #: src/emc/usr_intf/pncconf/pncconf.glade:40579 #: src/emc/usr_intf/pncconf/pncconf.glade:40599 #: src/emc/usr_intf/pncconf/pncconf.glade:40619 #: src/emc/usr_intf/pncconf/pncconf.glade:40639 #: src/emc/usr_intf/pncconf/pncconf.glade:42555 #: src/emc/usr_intf/pncconf/pncconf.glade:42778 #: src/emc/usr_intf/pncconf/pncconf.glade:44707 #: src/emc/usr_intf/pncconf/pncconf.glade:44727 #: src/emc/usr_intf/pncconf/pncconf.glade:44747 #: src/emc/usr_intf/pncconf/pncconf.glade:44767 #: src/emc/usr_intf/pncconf/pncconf.glade:44787 #: src/emc/usr_intf/pncconf/pncconf.glade:44807 #: src/emc/usr_intf/pncconf/pncconf.glade:44827 #: src/emc/usr_intf/pncconf/pncconf.glade:44847 #: src/emc/usr_intf/pncconf/pncconf.glade:44867 #: src/emc/usr_intf/pncconf/pncconf.glade:44887 #: src/emc/usr_intf/pncconf/pncconf.glade:44907 #: src/emc/usr_intf/pncconf/pncconf.glade:44927 #: src/emc/usr_intf/pncconf/pncconf.glade:44947 #: src/emc/usr_intf/pncconf/pncconf.glade:44967 #: src/emc/usr_intf/pncconf/pncconf.glade:44987 #: src/emc/usr_intf/pncconf/pncconf.glade:45007 #: src/emc/usr_intf/pncconf/pncconf.glade:45027 #: src/emc/usr_intf/pncconf/pncconf.glade:45047 #: src/emc/usr_intf/pncconf/pncconf.glade:45067 #: src/emc/usr_intf/pncconf/pncconf.glade:45087 #: src/emc/usr_intf/pncconf/pncconf.glade:45107 #: src/emc/usr_intf/pncconf/pncconf.glade:45127 #: src/emc/usr_intf/pncconf/pncconf.glade:45147 #: src/emc/usr_intf/pncconf/pncconf.glade:45456 #: src/emc/usr_intf/pncconf/pncconf.glade:45476 #: src/emc/usr_intf/pncconf/pncconf.glade:45496 #: src/emc/usr_intf/pncconf/pncconf.glade:45516 #: src/emc/usr_intf/pncconf/pncconf.glade:45536 #: src/emc/usr_intf/pncconf/pncconf.glade:45556 #: src/emc/usr_intf/pncconf/pncconf.glade:45576 #: src/emc/usr_intf/pncconf/pncconf.glade:45596 #: src/emc/usr_intf/pncconf/pncconf.glade:45616 #: src/emc/usr_intf/pncconf/pncconf.glade:45636 #: src/emc/usr_intf/pncconf/pncconf.glade:45656 #: src/emc/usr_intf/pncconf/pncconf.glade:46886 #: src/emc/usr_intf/pncconf/pncconf.glade:47122 #: src/emc/usr_intf/pncconf/pncconf.glade:47142 #: src/emc/usr_intf/pncconf/pncconf.glade:47162 #: src/emc/usr_intf/pncconf/pncconf.glade:47182 #: src/emc/usr_intf/pncconf/pncconf.glade:47202 #: src/emc/usr_intf/pncconf/pncconf.glade:47222 #: src/emc/usr_intf/pncconf/pncconf.glade:47242 #: src/emc/usr_intf/pncconf/pncconf.glade:47262 #: src/emc/usr_intf/pncconf/pncconf.glade:47282 #: src/emc/usr_intf/pncconf/pncconf.glade:47302 #: src/emc/usr_intf/pncconf/pncconf.glade:47322 #: src/emc/usr_intf/pncconf/pncconf.glade:47342 #: src/emc/usr_intf/pncconf/pncconf.glade:47362 #: src/emc/usr_intf/pncconf/pncconf.glade:47382 #: src/emc/usr_intf/pncconf/pncconf.glade:47402 #: src/emc/usr_intf/pncconf/pncconf.glade:47422 #: src/emc/usr_intf/pncconf/pncconf.glade:47442 #: src/emc/usr_intf/pncconf/pncconf.glade:47462 #: src/emc/usr_intf/pncconf/pncconf.glade:47482 #: src/emc/usr_intf/pncconf/pncconf.glade:47502 #: src/emc/usr_intf/pncconf/pncconf.glade:47522 #: src/emc/usr_intf/pncconf/pncconf.glade:47542 #: src/emc/usr_intf/pncconf/pncconf.glade:47562 #: src/emc/usr_intf/pncconf/pncconf.glade:49478 #: src/emc/usr_intf/pncconf/pncconf.glade:49701 #: src/emc/usr_intf/pncconf/pncconf.glade:51630 #: src/emc/usr_intf/pncconf/pncconf.glade:51650 #: src/emc/usr_intf/pncconf/pncconf.glade:51670 #: src/emc/usr_intf/pncconf/pncconf.glade:51690 #: src/emc/usr_intf/pncconf/pncconf.glade:51710 #: src/emc/usr_intf/pncconf/pncconf.glade:51730 #: src/emc/usr_intf/pncconf/pncconf.glade:51750 #: src/emc/usr_intf/pncconf/pncconf.glade:51770 #: src/emc/usr_intf/pncconf/pncconf.glade:51790 #: src/emc/usr_intf/pncconf/pncconf.glade:51810 #: src/emc/usr_intf/pncconf/pncconf.glade:51830 #: src/emc/usr_intf/pncconf/pncconf.glade:51850 #: src/emc/usr_intf/pncconf/pncconf.glade:51870 #: src/emc/usr_intf/pncconf/pncconf.glade:51890 #: src/emc/usr_intf/pncconf/pncconf.glade:51910 #: src/emc/usr_intf/pncconf/pncconf.glade:51930 #: src/emc/usr_intf/pncconf/pncconf.glade:51950 #: src/emc/usr_intf/pncconf/pncconf.glade:51970 #: src/emc/usr_intf/pncconf/pncconf.glade:51990 #: src/emc/usr_intf/pncconf/pncconf.glade:52010 #: src/emc/usr_intf/pncconf/pncconf.glade:52030 #: src/emc/usr_intf/pncconf/pncconf.glade:52050 #: src/emc/usr_intf/pncconf/pncconf.glade:52070 #: src/emc/usr_intf/pncconf/pncconf.glade:52379 #: src/emc/usr_intf/pncconf/pncconf.glade:52399 #: src/emc/usr_intf/pncconf/pncconf.glade:52419 #: src/emc/usr_intf/pncconf/pncconf.glade:52439 #: src/emc/usr_intf/pncconf/pncconf.glade:52459 #: src/emc/usr_intf/pncconf/pncconf.glade:52479 #: src/emc/usr_intf/pncconf/pncconf.glade:52499 #: src/emc/usr_intf/pncconf/pncconf.glade:52519 #: src/emc/usr_intf/pncconf/pncconf.glade:52539 #: src/emc/usr_intf/pncconf/pncconf.glade:52559 #: src/emc/usr_intf/pncconf/pncconf.glade:52579 #: src/emc/usr_intf/pncconf/pncconf.glade:53809 #: emc/usr_intf/pncconf/pncconf.glade:2251 #: emc/usr_intf/pncconf/pncconf.glade:4115 #: emc/usr_intf/pncconf/pncconf.glade:4136 #: emc/usr_intf/pncconf/pncconf.glade:4157 #: emc/usr_intf/pncconf/pncconf.glade:4178 #: emc/usr_intf/pncconf/pncconf.glade:4199 #: emc/usr_intf/pncconf/pncconf.glade:4220 #: emc/usr_intf/pncconf/pncconf.glade:4241 #: emc/usr_intf/pncconf/pncconf.glade:4262 #: emc/usr_intf/pncconf/pncconf.glade:4283 #: emc/usr_intf/pncconf/pncconf.glade:4304 #: emc/usr_intf/pncconf/pncconf.glade:4325 #: emc/usr_intf/pncconf/pncconf.glade:4346 #: emc/usr_intf/pncconf/pncconf.glade:4367 #: emc/usr_intf/pncconf/pncconf.glade:4388 #: emc/usr_intf/pncconf/pncconf.glade:4409 #: emc/usr_intf/pncconf/pncconf.glade:4430 #: emc/usr_intf/pncconf/pncconf.glade:4451 #: emc/usr_intf/pncconf/pncconf.glade:4472 #: emc/usr_intf/pncconf/pncconf.glade:4493 #: emc/usr_intf/pncconf/pncconf.glade:4514 #: emc/usr_intf/pncconf/pncconf.glade:4535 #: emc/usr_intf/pncconf/pncconf.glade:4556 #: emc/usr_intf/pncconf/pncconf.glade:4577 #: emc/usr_intf/pncconf/pncconf.glade:4820 #: emc/usr_intf/pncconf/pncconf.glade:4841 #: emc/usr_intf/pncconf/pncconf.glade:4862 #: emc/usr_intf/pncconf/pncconf.glade:4883 #: emc/usr_intf/pncconf/pncconf.glade:4904 #: emc/usr_intf/pncconf/pncconf.glade:4925 #: emc/usr_intf/pncconf/pncconf.glade:4946 #: emc/usr_intf/pncconf/pncconf.glade:4967 #: emc/usr_intf/pncconf/pncconf.glade:4988 #: emc/usr_intf/pncconf/pncconf.glade:5009 #: emc/usr_intf/pncconf/pncconf.glade:5030 #: emc/usr_intf/pncconf/pncconf.glade:5051 #: emc/usr_intf/pncconf/pncconf.glade:5072 #: emc/usr_intf/pncconf/pncconf.glade:5093 #: emc/usr_intf/pncconf/pncconf.glade:5114 #: emc/usr_intf/pncconf/pncconf.glade:5135 #: emc/usr_intf/pncconf/pncconf.glade:5156 #: emc/usr_intf/pncconf/pncconf.glade:5177 #: emc/usr_intf/pncconf/pncconf.glade:5198 #: emc/usr_intf/pncconf/pncconf.glade:5219 #: emc/usr_intf/pncconf/pncconf.glade:5240 #: emc/usr_intf/pncconf/pncconf.glade:5261 #: emc/usr_intf/pncconf/pncconf.glade:5282 #: emc/usr_intf/pncconf/pncconf.glade:7198 #: emc/usr_intf/pncconf/pncconf.glade:7405 #: emc/usr_intf/pncconf/pncconf.glade:7426 #: emc/usr_intf/pncconf/pncconf.glade:7447 #: emc/usr_intf/pncconf/pncconf.glade:7468 #: emc/usr_intf/pncconf/pncconf.glade:7489 #: emc/usr_intf/pncconf/pncconf.glade:7510 #: emc/usr_intf/pncconf/pncconf.glade:7531 #: emc/usr_intf/pncconf/pncconf.glade:7552 #: emc/usr_intf/pncconf/pncconf.glade:7573 #: emc/usr_intf/pncconf/pncconf.glade:7594 #: emc/usr_intf/pncconf/pncconf.glade:7615 #: emc/usr_intf/pncconf/pncconf.glade:7636 #: emc/usr_intf/pncconf/pncconf.glade:7657 #: emc/usr_intf/pncconf/pncconf.glade:7678 #: emc/usr_intf/pncconf/pncconf.glade:7699 #: emc/usr_intf/pncconf/pncconf.glade:7720 #: emc/usr_intf/pncconf/pncconf.glade:7741 #: emc/usr_intf/pncconf/pncconf.glade:7762 #: emc/usr_intf/pncconf/pncconf.glade:7783 #: emc/usr_intf/pncconf/pncconf.glade:7804 #: emc/usr_intf/pncconf/pncconf.glade:7825 #: emc/usr_intf/pncconf/pncconf.glade:7846 #: emc/usr_intf/pncconf/pncconf.glade:7867 #: emc/usr_intf/pncconf/pncconf.glade:9835 #: emc/usr_intf/pncconf/pncconf.glade:10146 #: emc/usr_intf/pncconf/pncconf.glade:10167 #: emc/usr_intf/pncconf/pncconf.glade:10188 #: emc/usr_intf/pncconf/pncconf.glade:10209 #: emc/usr_intf/pncconf/pncconf.glade:10230 #: emc/usr_intf/pncconf/pncconf.glade:10251 #: emc/usr_intf/pncconf/pncconf.glade:10272 #: emc/usr_intf/pncconf/pncconf.glade:10293 #: emc/usr_intf/pncconf/pncconf.glade:10314 #: emc/usr_intf/pncconf/pncconf.glade:10335 #: emc/usr_intf/pncconf/pncconf.glade:10356 #: emc/usr_intf/pncconf/pncconf.glade:10377 #: emc/usr_intf/pncconf/pncconf.glade:10398 #: emc/usr_intf/pncconf/pncconf.glade:10419 #: emc/usr_intf/pncconf/pncconf.glade:10440 #: emc/usr_intf/pncconf/pncconf.glade:10461 #: emc/usr_intf/pncconf/pncconf.glade:10482 #: emc/usr_intf/pncconf/pncconf.glade:10503 #: emc/usr_intf/pncconf/pncconf.glade:10524 #: emc/usr_intf/pncconf/pncconf.glade:10545 #: emc/usr_intf/pncconf/pncconf.glade:10566 #: emc/usr_intf/pncconf/pncconf.glade:10587 #: emc/usr_intf/pncconf/pncconf.glade:10608 #: emc/usr_intf/pncconf/pncconf.glade:12472 msgid "" "GPIO Input\n" "GPIO Output\n" "GPIO O Drain\n" "Encoder\n" "PWM\n" "StepGen\n" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:9198 #: src/emc/usr_intf/pncconf/pncconf.glade:13188 #: src/emc/usr_intf/pncconf/pncconf.glade:15884 #: src/emc/usr_intf/pncconf/pncconf.glade:18394 #: src/emc/usr_intf/pncconf/pncconf.glade:20397 #: src/emc/usr_intf/pncconf/pncconf.glade:21325 #: src/emc/usr_intf/pncconf/pncconf.glade:23121 #: src/emc/usr_intf/pncconf/pncconf.glade:24917 #: emc/usr_intf/pncconf/pncconf.glade:4087 #: emc/usr_intf/pncconf/pncconf.glade:5318 #: emc/usr_intf/pncconf/pncconf.glade:7903 #: emc/usr_intf/pncconf/pncconf.glade:10644 #, fuzzy msgid "Launch test panel" msgstr "Latenzzeit-_Testergebnis:" #: src/emc/usr_intf/pncconf/pncconf.glade:9213 #: src/emc/usr_intf/pncconf/pncconf.glade:9225 #: src/emc/usr_intf/pncconf/pncconf.glade:13162 #: src/emc/usr_intf/pncconf/pncconf.glade:13174 #: src/emc/usr_intf/pncconf/pncconf.glade:15858 #: src/emc/usr_intf/pncconf/pncconf.glade:15870 #: src/emc/usr_intf/pncconf/pncconf.glade:18367 #: src/emc/usr_intf/pncconf/pncconf.glade:18379 #: src/emc/usr_intf/pncconf/pncconf.glade:20370 #: src/emc/usr_intf/pncconf/pncconf.glade:20382 #: src/emc/usr_intf/pncconf/pncconf.glade:21339 #: src/emc/usr_intf/pncconf/pncconf.glade:21351 #: src/emc/usr_intf/pncconf/pncconf.glade:23135 #: src/emc/usr_intf/pncconf/pncconf.glade:23147 #: src/emc/usr_intf/pncconf/pncconf.glade:24931 #: src/emc/usr_intf/pncconf/pncconf.glade:24943 #: src/emc/usr_intf/pncconf/pncconf.glade:26815 #: src/emc/usr_intf/pncconf/pncconf.glade:26827 #: src/emc/usr_intf/pncconf/pncconf.glade:30826 #: src/emc/usr_intf/pncconf/pncconf.glade:30838 #: src/emc/usr_intf/pncconf/pncconf.glade:31831 #: src/emc/usr_intf/pncconf/pncconf.glade:35184 #: src/emc/usr_intf/pncconf/pncconf.glade:35196 #: src/emc/usr_intf/pncconf/pncconf.glade:36312 #: src/emc/usr_intf/pncconf/pncconf.glade:36324 #: src/emc/usr_intf/pncconf/pncconf.glade:39755 #: src/emc/usr_intf/pncconf/pncconf.glade:39767 #: src/emc/usr_intf/pncconf/pncconf.glade:40659 #: src/emc/usr_intf/pncconf/pncconf.glade:40671 #: src/emc/usr_intf/pncconf/pncconf.glade:44670 #: src/emc/usr_intf/pncconf/pncconf.glade:44682 #: src/emc/usr_intf/pncconf/pncconf.glade:45676 #: src/emc/usr_intf/pncconf/pncconf.glade:45688 #: src/emc/usr_intf/pncconf/pncconf.glade:47582 #: src/emc/usr_intf/pncconf/pncconf.glade:47594 #: src/emc/usr_intf/pncconf/pncconf.glade:51593 #: src/emc/usr_intf/pncconf/pncconf.glade:51605 #: src/emc/usr_intf/pncconf/pncconf.glade:52599 #: src/emc/usr_intf/pncconf/pncconf.glade:52611 #: emc/usr_intf/pncconf/pncconf.glade:4061 #: emc/usr_intf/pncconf/pncconf.glade:4073 #: emc/usr_intf/pncconf/pncconf.glade:5333 #: emc/usr_intf/pncconf/pncconf.glade:5345 #: emc/usr_intf/pncconf/pncconf.glade:7918 #: emc/usr_intf/pncconf/pncconf.glade:7930 #: emc/usr_intf/pncconf/pncconf.glade:10659 #: emc/usr_intf/pncconf/pncconf.glade:10671 msgid "function" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:9305 #: src/emc/usr_intf/pncconf/pncconf.glade:9357 #: src/emc/usr_intf/pncconf/pncconf.glade:9409 #: src/emc/usr_intf/pncconf/pncconf.glade:9461 #: src/emc/usr_intf/pncconf/pncconf.glade:10301 #: src/emc/usr_intf/pncconf/pncconf.glade:10353 #: src/emc/usr_intf/pncconf/pncconf.glade:10405 #: src/emc/usr_intf/pncconf/pncconf.glade:10457 #: src/emc/usr_intf/pncconf/pncconf.glade:10509 #: src/emc/usr_intf/pncconf/pncconf.glade:10561 #: src/emc/usr_intf/pncconf/pncconf.glade:10613 #: src/emc/usr_intf/pncconf/pncconf.glade:10665 #: src/emc/usr_intf/pncconf/pncconf.glade:10717 #: src/emc/usr_intf/pncconf/pncconf.glade:10769 #: src/emc/usr_intf/pncconf/pncconf.glade:11089 #: src/emc/usr_intf/pncconf/pncconf.glade:11141 #: src/emc/usr_intf/pncconf/pncconf.glade:11579 #: src/emc/usr_intf/pncconf/pncconf.glade:11631 #: src/emc/usr_intf/pncconf/pncconf.glade:11683 #: src/emc/usr_intf/pncconf/pncconf.glade:11735 #: src/emc/usr_intf/pncconf/pncconf.glade:11787 #: src/emc/usr_intf/pncconf/pncconf.glade:11839 #: src/emc/usr_intf/pncconf/pncconf.glade:11891 #: src/emc/usr_intf/pncconf/pncconf.glade:11943 #: src/emc/usr_intf/pncconf/pncconf.glade:11995 #: src/emc/usr_intf/pncconf/pncconf.glade:12047 #: src/emc/usr_intf/pncconf/pncconf.glade:12886 #: src/emc/usr_intf/pncconf/pncconf.glade:12938 #: src/emc/usr_intf/pncconf/pncconf.glade:12990 #: src/emc/usr_intf/pncconf/pncconf.glade:13042 #: src/emc/usr_intf/pncconf/pncconf.glade:13702 #: src/emc/usr_intf/pncconf/pncconf.glade:13754 #: src/emc/usr_intf/pncconf/pncconf.glade:14183 #: src/emc/usr_intf/pncconf/pncconf.glade:14235 #: src/emc/usr_intf/pncconf/pncconf.glade:14287 #: src/emc/usr_intf/pncconf/pncconf.glade:14339 #: src/emc/usr_intf/pncconf/pncconf.glade:14391 #: src/emc/usr_intf/pncconf/pncconf.glade:14443 #: src/emc/usr_intf/pncconf/pncconf.glade:14495 #: src/emc/usr_intf/pncconf/pncconf.glade:14547 #: src/emc/usr_intf/pncconf/pncconf.glade:14599 #: src/emc/usr_intf/pncconf/pncconf.glade:14651 #: src/emc/usr_intf/pncconf/pncconf.glade:14703 #: src/emc/usr_intf/pncconf/pncconf.glade:14755 #: src/emc/usr_intf/pncconf/pncconf.glade:15582 #: src/emc/usr_intf/pncconf/pncconf.glade:15634 #: src/emc/usr_intf/pncconf/pncconf.glade:15686 #: src/emc/usr_intf/pncconf/pncconf.glade:15738 #: src/emc/usr_intf/pncconf/pncconf.glade:16784 #: src/emc/usr_intf/pncconf/pncconf.glade:16836 #: src/emc/usr_intf/pncconf/pncconf.glade:16888 #: src/emc/usr_intf/pncconf/pncconf.glade:16940 #: src/emc/usr_intf/pncconf/pncconf.glade:16992 #: src/emc/usr_intf/pncconf/pncconf.glade:17044 #: src/emc/usr_intf/pncconf/pncconf.glade:17096 #: src/emc/usr_intf/pncconf/pncconf.glade:17148 #: src/emc/usr_intf/pncconf/pncconf.glade:17200 #: src/emc/usr_intf/pncconf/pncconf.glade:17252 #: src/emc/usr_intf/pncconf/pncconf.glade:17304 #: src/emc/usr_intf/pncconf/pncconf.glade:18143 #: src/emc/usr_intf/pncconf/pncconf.glade:18195 #: src/emc/usr_intf/pncconf/pncconf.glade:18247 #: src/emc/usr_intf/pncconf/pncconf.glade:18908 #: src/emc/usr_intf/pncconf/pncconf.glade:18960 #: src/emc/usr_intf/pncconf/pncconf.glade:26907 #: src/emc/usr_intf/pncconf/pncconf.glade:26959 #: src/emc/usr_intf/pncconf/pncconf.glade:27011 #: src/emc/usr_intf/pncconf/pncconf.glade:27063 #: src/emc/usr_intf/pncconf/pncconf.glade:27890 #: src/emc/usr_intf/pncconf/pncconf.glade:27942 #: src/emc/usr_intf/pncconf/pncconf.glade:27994 #: src/emc/usr_intf/pncconf/pncconf.glade:28046 #: src/emc/usr_intf/pncconf/pncconf.glade:28098 #: src/emc/usr_intf/pncconf/pncconf.glade:28150 #: src/emc/usr_intf/pncconf/pncconf.glade:28202 #: src/emc/usr_intf/pncconf/pncconf.glade:28254 #: src/emc/usr_intf/pncconf/pncconf.glade:28306 #: src/emc/usr_intf/pncconf/pncconf.glade:28358 #: src/emc/usr_intf/pncconf/pncconf.glade:28410 #: src/emc/usr_intf/pncconf/pncconf.glade:28462 #: src/emc/usr_intf/pncconf/pncconf.glade:29151 #: src/emc/usr_intf/pncconf/pncconf.glade:29203 #: src/emc/usr_intf/pncconf/pncconf.glade:29255 #: src/emc/usr_intf/pncconf/pncconf.glade:29307 #: src/emc/usr_intf/pncconf/pncconf.glade:29359 #: src/emc/usr_intf/pncconf/pncconf.glade:29411 #: src/emc/usr_intf/pncconf/pncconf.glade:29463 #: src/emc/usr_intf/pncconf/pncconf.glade:29515 #: src/emc/usr_intf/pncconf/pncconf.glade:29567 #: src/emc/usr_intf/pncconf/pncconf.glade:29619 #: src/emc/usr_intf/pncconf/pncconf.glade:29671 #: src/emc/usr_intf/pncconf/pncconf.glade:29723 #: src/emc/usr_intf/pncconf/pncconf.glade:30550 #: src/emc/usr_intf/pncconf/pncconf.glade:30602 #: src/emc/usr_intf/pncconf/pncconf.glade:30654 #: src/emc/usr_intf/pncconf/pncconf.glade:30706 #: src/emc/usr_intf/pncconf/pncconf.glade:32210 #: src/emc/usr_intf/pncconf/pncconf.glade:32262 #: src/emc/usr_intf/pncconf/pncconf.glade:32314 #: src/emc/usr_intf/pncconf/pncconf.glade:32366 #: src/emc/usr_intf/pncconf/pncconf.glade:32418 #: src/emc/usr_intf/pncconf/pncconf.glade:32470 #: src/emc/usr_intf/pncconf/pncconf.glade:32522 #: src/emc/usr_intf/pncconf/pncconf.glade:32574 #: src/emc/usr_intf/pncconf/pncconf.glade:32626 #: src/emc/usr_intf/pncconf/pncconf.glade:32678 #: src/emc/usr_intf/pncconf/pncconf.glade:32730 #: src/emc/usr_intf/pncconf/pncconf.glade:32782 #: src/emc/usr_intf/pncconf/pncconf.glade:33509 #: src/emc/usr_intf/pncconf/pncconf.glade:33561 #: src/emc/usr_intf/pncconf/pncconf.glade:33613 #: src/emc/usr_intf/pncconf/pncconf.glade:33665 #: src/emc/usr_intf/pncconf/pncconf.glade:33717 #: src/emc/usr_intf/pncconf/pncconf.glade:33769 #: src/emc/usr_intf/pncconf/pncconf.glade:33821 #: src/emc/usr_intf/pncconf/pncconf.glade:33873 #: src/emc/usr_intf/pncconf/pncconf.glade:33925 #: src/emc/usr_intf/pncconf/pncconf.glade:33977 #: src/emc/usr_intf/pncconf/pncconf.glade:34029 #: src/emc/usr_intf/pncconf/pncconf.glade:34081 #: src/emc/usr_intf/pncconf/pncconf.glade:34908 #: src/emc/usr_intf/pncconf/pncconf.glade:34960 #: src/emc/usr_intf/pncconf/pncconf.glade:35012 #: src/emc/usr_intf/pncconf/pncconf.glade:35064 #: src/emc/usr_intf/pncconf/pncconf.glade:36404 #: src/emc/usr_intf/pncconf/pncconf.glade:36456 #: src/emc/usr_intf/pncconf/pncconf.glade:36508 #: src/emc/usr_intf/pncconf/pncconf.glade:36560 #: src/emc/usr_intf/pncconf/pncconf.glade:37387 #: src/emc/usr_intf/pncconf/pncconf.glade:37439 #: src/emc/usr_intf/pncconf/pncconf.glade:37491 #: src/emc/usr_intf/pncconf/pncconf.glade:37543 #: src/emc/usr_intf/pncconf/pncconf.glade:37595 #: src/emc/usr_intf/pncconf/pncconf.glade:37647 #: src/emc/usr_intf/pncconf/pncconf.glade:37699 #: src/emc/usr_intf/pncconf/pncconf.glade:37751 #: src/emc/usr_intf/pncconf/pncconf.glade:37803 #: src/emc/usr_intf/pncconf/pncconf.glade:37855 #: src/emc/usr_intf/pncconf/pncconf.glade:37907 #: src/emc/usr_intf/pncconf/pncconf.glade:37959 #: src/emc/usr_intf/pncconf/pncconf.glade:38764 #: src/emc/usr_intf/pncconf/pncconf.glade:38816 #: src/emc/usr_intf/pncconf/pncconf.glade:38868 #: src/emc/usr_intf/pncconf/pncconf.glade:38920 #: src/emc/usr_intf/pncconf/pncconf.glade:38972 #: src/emc/usr_intf/pncconf/pncconf.glade:39024 #: src/emc/usr_intf/pncconf/pncconf.glade:39076 #: src/emc/usr_intf/pncconf/pncconf.glade:39128 #: src/emc/usr_intf/pncconf/pncconf.glade:39180 #: src/emc/usr_intf/pncconf/pncconf.glade:39232 #: src/emc/usr_intf/pncconf/pncconf.glade:39284 #: src/emc/usr_intf/pncconf/pncconf.glade:39336 #: src/emc/usr_intf/pncconf/pncconf.glade:40751 #: src/emc/usr_intf/pncconf/pncconf.glade:40803 #: src/emc/usr_intf/pncconf/pncconf.glade:40855 #: src/emc/usr_intf/pncconf/pncconf.glade:40907 #: src/emc/usr_intf/pncconf/pncconf.glade:41734 #: src/emc/usr_intf/pncconf/pncconf.glade:41786 #: src/emc/usr_intf/pncconf/pncconf.glade:41838 #: src/emc/usr_intf/pncconf/pncconf.glade:41890 #: src/emc/usr_intf/pncconf/pncconf.glade:41942 #: src/emc/usr_intf/pncconf/pncconf.glade:41994 #: src/emc/usr_intf/pncconf/pncconf.glade:42046 #: src/emc/usr_intf/pncconf/pncconf.glade:42098 #: src/emc/usr_intf/pncconf/pncconf.glade:42150 #: src/emc/usr_intf/pncconf/pncconf.glade:42202 #: src/emc/usr_intf/pncconf/pncconf.glade:42254 #: src/emc/usr_intf/pncconf/pncconf.glade:42306 #: src/emc/usr_intf/pncconf/pncconf.glade:42995 #: src/emc/usr_intf/pncconf/pncconf.glade:43047 #: src/emc/usr_intf/pncconf/pncconf.glade:43099 #: src/emc/usr_intf/pncconf/pncconf.glade:43151 #: src/emc/usr_intf/pncconf/pncconf.glade:43203 #: src/emc/usr_intf/pncconf/pncconf.glade:43255 #: src/emc/usr_intf/pncconf/pncconf.glade:43307 #: src/emc/usr_intf/pncconf/pncconf.glade:43359 #: src/emc/usr_intf/pncconf/pncconf.glade:43411 #: src/emc/usr_intf/pncconf/pncconf.glade:43463 #: src/emc/usr_intf/pncconf/pncconf.glade:43515 #: src/emc/usr_intf/pncconf/pncconf.glade:43567 #: src/emc/usr_intf/pncconf/pncconf.glade:44394 #: src/emc/usr_intf/pncconf/pncconf.glade:44446 #: src/emc/usr_intf/pncconf/pncconf.glade:44498 #: src/emc/usr_intf/pncconf/pncconf.glade:44550 #: src/emc/usr_intf/pncconf/pncconf.glade:46067 #: src/emc/usr_intf/pncconf/pncconf.glade:46119 #: src/emc/usr_intf/pncconf/pncconf.glade:46171 #: src/emc/usr_intf/pncconf/pncconf.glade:46223 #: src/emc/usr_intf/pncconf/pncconf.glade:46275 #: src/emc/usr_intf/pncconf/pncconf.glade:46327 #: src/emc/usr_intf/pncconf/pncconf.glade:46379 #: src/emc/usr_intf/pncconf/pncconf.glade:46431 #: src/emc/usr_intf/pncconf/pncconf.glade:46483 #: src/emc/usr_intf/pncconf/pncconf.glade:46535 #: src/emc/usr_intf/pncconf/pncconf.glade:46587 #: src/emc/usr_intf/pncconf/pncconf.glade:46639 #: src/emc/usr_intf/pncconf/pncconf.glade:47674 #: src/emc/usr_intf/pncconf/pncconf.glade:47726 #: src/emc/usr_intf/pncconf/pncconf.glade:47778 #: src/emc/usr_intf/pncconf/pncconf.glade:47830 #: src/emc/usr_intf/pncconf/pncconf.glade:48657 #: src/emc/usr_intf/pncconf/pncconf.glade:48709 #: src/emc/usr_intf/pncconf/pncconf.glade:48761 #: src/emc/usr_intf/pncconf/pncconf.glade:48813 #: src/emc/usr_intf/pncconf/pncconf.glade:48865 #: src/emc/usr_intf/pncconf/pncconf.glade:48917 #: src/emc/usr_intf/pncconf/pncconf.glade:48969 #: src/emc/usr_intf/pncconf/pncconf.glade:49021 #: src/emc/usr_intf/pncconf/pncconf.glade:49073 #: src/emc/usr_intf/pncconf/pncconf.glade:49125 #: src/emc/usr_intf/pncconf/pncconf.glade:49177 #: src/emc/usr_intf/pncconf/pncconf.glade:49229 #: src/emc/usr_intf/pncconf/pncconf.glade:49918 #: src/emc/usr_intf/pncconf/pncconf.glade:49970 #: src/emc/usr_intf/pncconf/pncconf.glade:50022 #: src/emc/usr_intf/pncconf/pncconf.glade:50074 #: src/emc/usr_intf/pncconf/pncconf.glade:50126 #: src/emc/usr_intf/pncconf/pncconf.glade:50178 #: src/emc/usr_intf/pncconf/pncconf.glade:50230 #: src/emc/usr_intf/pncconf/pncconf.glade:50282 #: src/emc/usr_intf/pncconf/pncconf.glade:50334 #: src/emc/usr_intf/pncconf/pncconf.glade:50386 #: src/emc/usr_intf/pncconf/pncconf.glade:50438 #: src/emc/usr_intf/pncconf/pncconf.glade:50490 #: src/emc/usr_intf/pncconf/pncconf.glade:51317 #: src/emc/usr_intf/pncconf/pncconf.glade:51369 #: src/emc/usr_intf/pncconf/pncconf.glade:51421 #: src/emc/usr_intf/pncconf/pncconf.glade:51473 #: src/emc/usr_intf/pncconf/pncconf.glade:52990 #: src/emc/usr_intf/pncconf/pncconf.glade:53042 #: src/emc/usr_intf/pncconf/pncconf.glade:53094 #: src/emc/usr_intf/pncconf/pncconf.glade:53146 #: src/emc/usr_intf/pncconf/pncconf.glade:53198 #: src/emc/usr_intf/pncconf/pncconf.glade:53250 #: src/emc/usr_intf/pncconf/pncconf.glade:53302 #: src/emc/usr_intf/pncconf/pncconf.glade:53354 #: src/emc/usr_intf/pncconf/pncconf.glade:53406 #: src/emc/usr_intf/pncconf/pncconf.glade:53458 #: src/emc/usr_intf/pncconf/pncconf.glade:53510 #: src/emc/usr_intf/pncconf/pncconf.glade:53562 #: emc/usr_intf/pncconf/pncconf.glade:2105 #: emc/usr_intf/pncconf/pncconf.glade:2157 #: emc/usr_intf/pncconf/pncconf.glade:2477 #: emc/usr_intf/pncconf/pncconf.glade:2529 #: emc/usr_intf/pncconf/pncconf.glade:2581 #: emc/usr_intf/pncconf/pncconf.glade:2633 #: emc/usr_intf/pncconf/pncconf.glade:2685 #: emc/usr_intf/pncconf/pncconf.glade:2737 #: emc/usr_intf/pncconf/pncconf.glade:2789 #: emc/usr_intf/pncconf/pncconf.glade:2841 #: emc/usr_intf/pncconf/pncconf.glade:2893 #: emc/usr_intf/pncconf/pncconf.glade:2945 #: emc/usr_intf/pncconf/pncconf.glade:3784 #: emc/usr_intf/pncconf/pncconf.glade:3837 #: emc/usr_intf/pncconf/pncconf.glade:3889 #: emc/usr_intf/pncconf/pncconf.glade:3941 #: emc/usr_intf/pncconf/pncconf.glade:4742 #: emc/usr_intf/pncconf/pncconf.glade:5425 #: emc/usr_intf/pncconf/pncconf.glade:5477 #: emc/usr_intf/pncconf/pncconf.glade:5529 #: emc/usr_intf/pncconf/pncconf.glade:5581 #: emc/usr_intf/pncconf/pncconf.glade:6420 #: emc/usr_intf/pncconf/pncconf.glade:6472 #: emc/usr_intf/pncconf/pncconf.glade:6524 #: emc/usr_intf/pncconf/pncconf.glade:6576 #: emc/usr_intf/pncconf/pncconf.glade:6628 #: emc/usr_intf/pncconf/pncconf.glade:6680 #: emc/usr_intf/pncconf/pncconf.glade:6732 #: emc/usr_intf/pncconf/pncconf.glade:6784 #: emc/usr_intf/pncconf/pncconf.glade:6836 #: emc/usr_intf/pncconf/pncconf.glade:6888 #: emc/usr_intf/pncconf/pncconf.glade:6940 #: emc/usr_intf/pncconf/pncconf.glade:8010 #: emc/usr_intf/pncconf/pncconf.glade:8062 #: emc/usr_intf/pncconf/pncconf.glade:8114 #: emc/usr_intf/pncconf/pncconf.glade:8166 #: emc/usr_intf/pncconf/pncconf.glade:9005 #: emc/usr_intf/pncconf/pncconf.glade:9057 #: emc/usr_intf/pncconf/pncconf.glade:9109 #: emc/usr_intf/pncconf/pncconf.glade:9161 #: emc/usr_intf/pncconf/pncconf.glade:9213 #: emc/usr_intf/pncconf/pncconf.glade:9265 #: emc/usr_intf/pncconf/pncconf.glade:9317 #: emc/usr_intf/pncconf/pncconf.glade:9369 #: emc/usr_intf/pncconf/pncconf.glade:9421 #: emc/usr_intf/pncconf/pncconf.glade:9473 #: emc/usr_intf/pncconf/pncconf.glade:9525 #: emc/usr_intf/pncconf/pncconf.glade:9577 #: emc/usr_intf/pncconf/pncconf.glade:10016 #: emc/usr_intf/pncconf/pncconf.glade:10068 #: emc/usr_intf/pncconf/pncconf.glade:10751 #: emc/usr_intf/pncconf/pncconf.glade:10803 #: emc/usr_intf/pncconf/pncconf.glade:10855 #: emc/usr_intf/pncconf/pncconf.glade:11694 #: emc/usr_intf/pncconf/pncconf.glade:11746 #: emc/usr_intf/pncconf/pncconf.glade:11798 #: emc/usr_intf/pncconf/pncconf.glade:11850 #: emc/usr_intf/pncconf/pncconf.glade:11902 #: emc/usr_intf/pncconf/pncconf.glade:11954 #: emc/usr_intf/pncconf/pncconf.glade:12006 #: emc/usr_intf/pncconf/pncconf.glade:12058 #: emc/usr_intf/pncconf/pncconf.glade:12110 #: emc/usr_intf/pncconf/pncconf.glade:12162 #: emc/usr_intf/pncconf/pncconf.glade:12214 msgid "" "ESTOP IN\n" "Spindle PPR\n" "Spindle A \n" "Spindle B \n" "Home X \n" "Home Y \n" "Home Z\n" "Home A\n" "Minimum Limit + Home X \n" "Minimum Limit + Home Y \n" "Minimum Limit + Home Z \n" "Minimum Limit + Home A\n" "Maximum Limit + Home X \n" "Maximum Limit + Home Y \n" "Maximum Limit + Home Z \n" "Maximum Limit + Home A\n" "Both Limit + Home X \n" "Both Limit + Home Y \n" "Both Limit + Home Z \n" "Both Limit + Home A\n" "Minimum Limit X \n" "Minimum Limit Y \n" "Minimum Limit Z \n" "Minimum Limit A\n" "Maximum Limit X \n" "Maximum Limit Y \n" "Maximum Limit Z \n" "Maximum Limit A\n" "Both Limit X \n" "Both Limit Y \n" "Both Limit Z \n" "Both Limit A\n" "All limits\n" "All home\n" "Unused" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:9515 #: src/emc/usr_intf/pncconf/pncconf.glade:12871 #: src/emc/usr_intf/pncconf/pncconf.glade:18128 #: src/emc/usr_intf/pncconf/pncconf.glade:20233 #: src/emc/usr_intf/pncconf/pncconf.glade:21486 #: src/emc/usr_intf/pncconf/pncconf.glade:23282 #: src/emc/usr_intf/pncconf/pncconf.glade:25078 #: emc/usr_intf/pncconf/pncconf.glade:3769 #: emc/usr_intf/pncconf/pncconf.glade:5634 #: emc/usr_intf/pncconf/pncconf.glade:8219 #: emc/usr_intf/pncconf/pncconf.glade:10908 msgid "31:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:9531 #: src/emc/usr_intf/pncconf/pncconf.glade:12855 #: src/emc/usr_intf/pncconf/pncconf.glade:18112 #: src/emc/usr_intf/pncconf/pncconf.glade:20217 #: src/emc/usr_intf/pncconf/pncconf.glade:21502 #: src/emc/usr_intf/pncconf/pncconf.glade:23298 #: src/emc/usr_intf/pncconf/pncconf.glade:25094 #: emc/usr_intf/pncconf/pncconf.glade:3753 #: emc/usr_intf/pncconf/pncconf.glade:5650 #: emc/usr_intf/pncconf/pncconf.glade:8235 #: emc/usr_intf/pncconf/pncconf.glade:10924 msgid "29:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:9547 #: src/emc/usr_intf/pncconf/pncconf.glade:12839 #: src/emc/usr_intf/pncconf/pncconf.glade:18096 #: src/emc/usr_intf/pncconf/pncconf.glade:20201 #: src/emc/usr_intf/pncconf/pncconf.glade:21518 #: src/emc/usr_intf/pncconf/pncconf.glade:23314 #: src/emc/usr_intf/pncconf/pncconf.glade:25110 #: emc/usr_intf/pncconf/pncconf.glade:3737 #: emc/usr_intf/pncconf/pncconf.glade:5666 #: emc/usr_intf/pncconf/pncconf.glade:8251 #: emc/usr_intf/pncconf/pncconf.glade:10940 msgid "27:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:9563 #: src/emc/usr_intf/pncconf/pncconf.glade:12823 #: src/emc/usr_intf/pncconf/pncconf.glade:18080 #: src/emc/usr_intf/pncconf/pncconf.glade:20185 #: src/emc/usr_intf/pncconf/pncconf.glade:21534 #: src/emc/usr_intf/pncconf/pncconf.glade:23330 #: src/emc/usr_intf/pncconf/pncconf.glade:25126 #: emc/usr_intf/pncconf/pncconf.glade:3721 #: emc/usr_intf/pncconf/pncconf.glade:5682 #: emc/usr_intf/pncconf/pncconf.glade:8267 #: emc/usr_intf/pncconf/pncconf.glade:10956 msgid "25:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:9936 #: src/emc/usr_intf/pncconf/pncconf.glade:12450 #: src/emc/usr_intf/pncconf/pncconf.glade:17707 #: src/emc/usr_intf/pncconf/pncconf.glade:19924 #: src/emc/usr_intf/pncconf/pncconf.glade:21795 #: src/emc/usr_intf/pncconf/pncconf.glade:23591 #: src/emc/usr_intf/pncconf/pncconf.glade:25387 #: emc/usr_intf/pncconf/pncconf.glade:3348 #: emc/usr_intf/pncconf/pncconf.glade:6055 #: emc/usr_intf/pncconf/pncconf.glade:8640 #: emc/usr_intf/pncconf/pncconf.glade:11329 msgid "33:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:9952 #: src/emc/usr_intf/pncconf/pncconf.glade:12434 #: src/emc/usr_intf/pncconf/pncconf.glade:17691 #: src/emc/usr_intf/pncconf/pncconf.glade:19908 #: src/emc/usr_intf/pncconf/pncconf.glade:21811 #: src/emc/usr_intf/pncconf/pncconf.glade:23607 #: src/emc/usr_intf/pncconf/pncconf.glade:25403 #: emc/usr_intf/pncconf/pncconf.glade:3332 #: emc/usr_intf/pncconf/pncconf.glade:6071 #: emc/usr_intf/pncconf/pncconf.glade:8656 #: emc/usr_intf/pncconf/pncconf.glade:11345 msgid "35:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:9968 #: src/emc/usr_intf/pncconf/pncconf.glade:12418 #: src/emc/usr_intf/pncconf/pncconf.glade:17675 #: src/emc/usr_intf/pncconf/pncconf.glade:19892 #: src/emc/usr_intf/pncconf/pncconf.glade:21827 #: src/emc/usr_intf/pncconf/pncconf.glade:23623 #: src/emc/usr_intf/pncconf/pncconf.glade:25419 #: emc/usr_intf/pncconf/pncconf.glade:3316 #: emc/usr_intf/pncconf/pncconf.glade:6087 #: emc/usr_intf/pncconf/pncconf.glade:8672 #: emc/usr_intf/pncconf/pncconf.glade:11361 msgid "37:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:9984 #: src/emc/usr_intf/pncconf/pncconf.glade:12402 #: src/emc/usr_intf/pncconf/pncconf.glade:17659 #: src/emc/usr_intf/pncconf/pncconf.glade:19876 #: src/emc/usr_intf/pncconf/pncconf.glade:21843 #: src/emc/usr_intf/pncconf/pncconf.glade:23639 #: src/emc/usr_intf/pncconf/pncconf.glade:25435 #: emc/usr_intf/pncconf/pncconf.glade:3300 #: emc/usr_intf/pncconf/pncconf.glade:6103 #: emc/usr_intf/pncconf/pncconf.glade:8688 #: emc/usr_intf/pncconf/pncconf.glade:11377 msgid "39:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10000 #: src/emc/usr_intf/pncconf/pncconf.glade:12386 #: src/emc/usr_intf/pncconf/pncconf.glade:17643 #: src/emc/usr_intf/pncconf/pncconf.glade:19860 #: src/emc/usr_intf/pncconf/pncconf.glade:21859 #: src/emc/usr_intf/pncconf/pncconf.glade:23655 #: src/emc/usr_intf/pncconf/pncconf.glade:25451 #: emc/usr_intf/pncconf/pncconf.glade:3284 #: emc/usr_intf/pncconf/pncconf.glade:6119 #: emc/usr_intf/pncconf/pncconf.glade:8704 #: emc/usr_intf/pncconf/pncconf.glade:11393 msgid "41:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10016 #: src/emc/usr_intf/pncconf/pncconf.glade:12370 #: src/emc/usr_intf/pncconf/pncconf.glade:17627 #: src/emc/usr_intf/pncconf/pncconf.glade:19844 #: src/emc/usr_intf/pncconf/pncconf.glade:21875 #: src/emc/usr_intf/pncconf/pncconf.glade:23671 #: src/emc/usr_intf/pncconf/pncconf.glade:25467 #: emc/usr_intf/pncconf/pncconf.glade:3268 #: emc/usr_intf/pncconf/pncconf.glade:6135 #: emc/usr_intf/pncconf/pncconf.glade:8720 #: emc/usr_intf/pncconf/pncconf.glade:11409 msgid "43:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10032 #: src/emc/usr_intf/pncconf/pncconf.glade:12354 #: src/emc/usr_intf/pncconf/pncconf.glade:17611 #: src/emc/usr_intf/pncconf/pncconf.glade:19828 #: src/emc/usr_intf/pncconf/pncconf.glade:21891 #: src/emc/usr_intf/pncconf/pncconf.glade:23687 #: src/emc/usr_intf/pncconf/pncconf.glade:25483 #: emc/usr_intf/pncconf/pncconf.glade:3252 #: emc/usr_intf/pncconf/pncconf.glade:6151 #: emc/usr_intf/pncconf/pncconf.glade:8736 #: emc/usr_intf/pncconf/pncconf.glade:11425 msgid "45:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10099 #: src/emc/usr_intf/pncconf/pncconf.glade:12287 #: src/emc/usr_intf/pncconf/pncconf.glade:17544 #: src/emc/usr_intf/pncconf/pncconf.glade:19777 #: src/emc/usr_intf/pncconf/pncconf.glade:21942 #: src/emc/usr_intf/pncconf/pncconf.glade:23738 #: src/emc/usr_intf/pncconf/pncconf.glade:25534 #: emc/usr_intf/pncconf/pncconf.glade:3185 #: emc/usr_intf/pncconf/pncconf.glade:6218 #: emc/usr_intf/pncconf/pncconf.glade:8803 #: emc/usr_intf/pncconf/pncconf.glade:11492 msgid "47:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10822 #: src/emc/usr_intf/pncconf/pncconf.glade:11077 #: src/emc/usr_intf/pncconf/pncconf.glade:11311 #: src/emc/usr_intf/pncconf/pncconf.glade:11567 #: src/emc/usr_intf/pncconf/pncconf.glade:13924 #: src/emc/usr_intf/pncconf/pncconf.glade:14171 #: src/emc/usr_intf/pncconf/pncconf.glade:16516 #: src/emc/usr_intf/pncconf/pncconf.glade:16772 #: src/emc/usr_intf/pncconf/pncconf.glade:19129 #: src/emc/usr_intf/pncconf/pncconf.glade:19379 #: src/emc/usr_intf/pncconf/pncconf.glade:22343 #: src/emc/usr_intf/pncconf/pncconf.glade:22592 #: src/emc/usr_intf/pncconf/pncconf.glade:24139 #: src/emc/usr_intf/pncconf/pncconf.glade:24388 #: src/emc/usr_intf/pncconf/pncconf.glade:25935 #: src/emc/usr_intf/pncconf/pncconf.glade:26184 #: src/emc/usr_intf/pncconf/pncconf.glade:28515 #: src/emc/usr_intf/pncconf/pncconf.glade:28761 #: src/emc/usr_intf/pncconf/pncconf.glade:28892 #: src/emc/usr_intf/pncconf/pncconf.glade:29139 #: src/emc/usr_intf/pncconf/pncconf.glade:33079 #: src/emc/usr_intf/pncconf/pncconf.glade:33250 #: src/emc/usr_intf/pncconf/pncconf.glade:33497 #: src/emc/usr_intf/pncconf/pncconf.glade:38012 #: src/emc/usr_intf/pncconf/pncconf.glade:38258 #: src/emc/usr_intf/pncconf/pncconf.glade:38507 #: src/emc/usr_intf/pncconf/pncconf.glade:42359 #: src/emc/usr_intf/pncconf/pncconf.glade:42605 #: src/emc/usr_intf/pncconf/pncconf.glade:42736 #: src/emc/usr_intf/pncconf/pncconf.glade:42983 #: src/emc/usr_intf/pncconf/pncconf.glade:46936 #: src/emc/usr_intf/pncconf/pncconf.glade:49282 #: src/emc/usr_intf/pncconf/pncconf.glade:49528 #: src/emc/usr_intf/pncconf/pncconf.glade:49659 #: src/emc/usr_intf/pncconf/pncconf.glade:49906 #: src/emc/usr_intf/pncconf/pncconf.glade:53859 #: emc/usr_intf/pncconf/pncconf.glade:2209 #: emc/usr_intf/pncconf/pncconf.glade:2465 #: emc/usr_intf/pncconf/pncconf.glade:6993 #: emc/usr_intf/pncconf/pncconf.glade:7249 #: emc/usr_intf/pncconf/pncconf.glade:9630 #: emc/usr_intf/pncconf/pncconf.glade:9886 #: emc/usr_intf/pncconf/pncconf.glade:12267 #: emc/usr_intf/pncconf/pncconf.glade:12523 #, fuzzy msgid "Pin Type" msgstr "Positionierungs-Info" #: src/emc/usr_intf/pncconf/pncconf.glade:10835 #: src/emc/usr_intf/pncconf/pncconf.glade:11553 #: src/emc/usr_intf/pncconf/pncconf.glade:16758 #: src/emc/usr_intf/pncconf/pncconf.glade:19365 #: src/emc/usr_intf/pncconf/pncconf.glade:22356 #: src/emc/usr_intf/pncconf/pncconf.glade:24152 #: src/emc/usr_intf/pncconf/pncconf.glade:25948 #: emc/usr_intf/pncconf/pncconf.glade:2451 #: emc/usr_intf/pncconf/pncconf.glade:7006 #: emc/usr_intf/pncconf/pncconf.glade:9643 #: emc/usr_intf/pncconf/pncconf.glade:12280 msgid "23:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10849 #: src/emc/usr_intf/pncconf/pncconf.glade:11539 #: src/emc/usr_intf/pncconf/pncconf.glade:16744 #: src/emc/usr_intf/pncconf/pncconf.glade:19351 #: src/emc/usr_intf/pncconf/pncconf.glade:22370 #: src/emc/usr_intf/pncconf/pncconf.glade:24166 #: src/emc/usr_intf/pncconf/pncconf.glade:25962 #: emc/usr_intf/pncconf/pncconf.glade:2437 #: emc/usr_intf/pncconf/pncconf.glade:7020 #: emc/usr_intf/pncconf/pncconf.glade:9657 #: emc/usr_intf/pncconf/pncconf.glade:12294 msgid "21:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10863 #: src/emc/usr_intf/pncconf/pncconf.glade:11525 #: src/emc/usr_intf/pncconf/pncconf.glade:16730 #: src/emc/usr_intf/pncconf/pncconf.glade:19337 #: src/emc/usr_intf/pncconf/pncconf.glade:22384 #: src/emc/usr_intf/pncconf/pncconf.glade:24180 #: src/emc/usr_intf/pncconf/pncconf.glade:25976 #: emc/usr_intf/pncconf/pncconf.glade:2423 #: emc/usr_intf/pncconf/pncconf.glade:7034 #: emc/usr_intf/pncconf/pncconf.glade:9671 #: emc/usr_intf/pncconf/pncconf.glade:12308 msgid "19:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10877 #: src/emc/usr_intf/pncconf/pncconf.glade:11511 #: src/emc/usr_intf/pncconf/pncconf.glade:16716 #: src/emc/usr_intf/pncconf/pncconf.glade:19323 #: src/emc/usr_intf/pncconf/pncconf.glade:22398 #: src/emc/usr_intf/pncconf/pncconf.glade:24194 #: src/emc/usr_intf/pncconf/pncconf.glade:25990 #: emc/usr_intf/pncconf/pncconf.glade:2409 #: emc/usr_intf/pncconf/pncconf.glade:7048 #: emc/usr_intf/pncconf/pncconf.glade:9685 #: emc/usr_intf/pncconf/pncconf.glade:12322 msgid "17:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10891 #: src/emc/usr_intf/pncconf/pncconf.glade:11497 #: src/emc/usr_intf/pncconf/pncconf.glade:16702 #: src/emc/usr_intf/pncconf/pncconf.glade:19309 #: src/emc/usr_intf/pncconf/pncconf.glade:22412 #: src/emc/usr_intf/pncconf/pncconf.glade:24208 #: src/emc/usr_intf/pncconf/pncconf.glade:26004 #: emc/usr_intf/pncconf/pncconf.glade:2395 #: emc/usr_intf/pncconf/pncconf.glade:7062 #: emc/usr_intf/pncconf/pncconf.glade:9699 #: emc/usr_intf/pncconf/pncconf.glade:12336 msgid "15:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10905 #: src/emc/usr_intf/pncconf/pncconf.glade:11483 #: src/emc/usr_intf/pncconf/pncconf.glade:16688 #: src/emc/usr_intf/pncconf/pncconf.glade:19295 #: src/emc/usr_intf/pncconf/pncconf.glade:22426 #: src/emc/usr_intf/pncconf/pncconf.glade:24222 #: src/emc/usr_intf/pncconf/pncconf.glade:26018 #: emc/usr_intf/pncconf/pncconf.glade:2381 #: emc/usr_intf/pncconf/pncconf.glade:7076 #: emc/usr_intf/pncconf/pncconf.glade:9713 #: emc/usr_intf/pncconf/pncconf.glade:12350 msgid "13:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10919 #: src/emc/usr_intf/pncconf/pncconf.glade:11469 #: src/emc/usr_intf/pncconf/pncconf.glade:16674 #: src/emc/usr_intf/pncconf/pncconf.glade:19281 #: src/emc/usr_intf/pncconf/pncconf.glade:22440 #: src/emc/usr_intf/pncconf/pncconf.glade:24236 #: src/emc/usr_intf/pncconf/pncconf.glade:26032 #: emc/usr_intf/pncconf/pncconf.glade:2367 #: emc/usr_intf/pncconf/pncconf.glade:7090 #: emc/usr_intf/pncconf/pncconf.glade:9727 #: emc/usr_intf/pncconf/pncconf.glade:12364 msgid "11:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10933 #: src/emc/usr_intf/pncconf/pncconf.glade:11455 #: src/emc/usr_intf/pncconf/pncconf.glade:16660 #: src/emc/usr_intf/pncconf/pncconf.glade:19267 #: src/emc/usr_intf/pncconf/pncconf.glade:22454 #: src/emc/usr_intf/pncconf/pncconf.glade:24250 #: src/emc/usr_intf/pncconf/pncconf.glade:26046 #: emc/usr_intf/pncconf/pncconf.glade:2353 #: emc/usr_intf/pncconf/pncconf.glade:7104 #: emc/usr_intf/pncconf/pncconf.glade:9741 #: emc/usr_intf/pncconf/pncconf.glade:12378 msgid " 9:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10947 #: src/emc/usr_intf/pncconf/pncconf.glade:11441 #: src/emc/usr_intf/pncconf/pncconf.glade:16646 #: src/emc/usr_intf/pncconf/pncconf.glade:19253 #: src/emc/usr_intf/pncconf/pncconf.glade:22468 #: src/emc/usr_intf/pncconf/pncconf.glade:24264 #: src/emc/usr_intf/pncconf/pncconf.glade:26060 #: emc/usr_intf/pncconf/pncconf.glade:2339 #: emc/usr_intf/pncconf/pncconf.glade:7118 #: emc/usr_intf/pncconf/pncconf.glade:9755 #: emc/usr_intf/pncconf/pncconf.glade:12392 msgid " 7:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10961 #: src/emc/usr_intf/pncconf/pncconf.glade:11427 #: src/emc/usr_intf/pncconf/pncconf.glade:16632 #: src/emc/usr_intf/pncconf/pncconf.glade:19239 #: src/emc/usr_intf/pncconf/pncconf.glade:22482 #: src/emc/usr_intf/pncconf/pncconf.glade:24278 #: src/emc/usr_intf/pncconf/pncconf.glade:26074 #: emc/usr_intf/pncconf/pncconf.glade:2325 #: emc/usr_intf/pncconf/pncconf.glade:7132 #: emc/usr_intf/pncconf/pncconf.glade:9769 #: emc/usr_intf/pncconf/pncconf.glade:12406 msgid " 5:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10975 #: src/emc/usr_intf/pncconf/pncconf.glade:11413 #: src/emc/usr_intf/pncconf/pncconf.glade:16618 #: src/emc/usr_intf/pncconf/pncconf.glade:19225 #: src/emc/usr_intf/pncconf/pncconf.glade:22496 #: src/emc/usr_intf/pncconf/pncconf.glade:24292 #: src/emc/usr_intf/pncconf/pncconf.glade:26088 #: emc/usr_intf/pncconf/pncconf.glade:2311 #: emc/usr_intf/pncconf/pncconf.glade:7146 #: emc/usr_intf/pncconf/pncconf.glade:9783 #: emc/usr_intf/pncconf/pncconf.glade:12420 msgid " 3:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:10989 #: src/emc/usr_intf/pncconf/pncconf.glade:11399 #: src/emc/usr_intf/pncconf/pncconf.glade:16604 #: src/emc/usr_intf/pncconf/pncconf.glade:19211 #: src/emc/usr_intf/pncconf/pncconf.glade:22510 #: src/emc/usr_intf/pncconf/pncconf.glade:24306 #: src/emc/usr_intf/pncconf/pncconf.glade:26102 #: emc/usr_intf/pncconf/pncconf.glade:2297 #: emc/usr_intf/pncconf/pncconf.glade:7160 #: emc/usr_intf/pncconf/pncconf.glade:9797 #: emc/usr_intf/pncconf/pncconf.glade:12434 msgid " 1:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:11002 #: src/emc/usr_intf/pncconf/pncconf.glade:11065 #: src/emc/usr_intf/pncconf/pncconf.glade:11324 #: src/emc/usr_intf/pncconf/pncconf.glade:11386 #: src/emc/usr_intf/pncconf/pncconf.glade:13937 #: src/emc/usr_intf/pncconf/pncconf.glade:13999 #: src/emc/usr_intf/pncconf/pncconf.glade:16529 #: src/emc/usr_intf/pncconf/pncconf.glade:16591 #: src/emc/usr_intf/pncconf/pncconf.glade:19142 #: src/emc/usr_intf/pncconf/pncconf.glade:19198 #: src/emc/usr_intf/pncconf/pncconf.glade:22523 #: src/emc/usr_intf/pncconf/pncconf.glade:22580 #: src/emc/usr_intf/pncconf/pncconf.glade:24319 #: src/emc/usr_intf/pncconf/pncconf.glade:24376 #: src/emc/usr_intf/pncconf/pncconf.glade:26115 #: src/emc/usr_intf/pncconf/pncconf.glade:26172 #: src/emc/usr_intf/pncconf/pncconf.glade:28686 #: src/emc/usr_intf/pncconf/pncconf.glade:28749 #: src/emc/usr_intf/pncconf/pncconf.glade:28905 #: src/emc/usr_intf/pncconf/pncconf.glade:28967 #: src/emc/usr_intf/pncconf/pncconf.glade:33067 #: src/emc/usr_intf/pncconf/pncconf.glade:33263 #: src/emc/usr_intf/pncconf/pncconf.glade:33325 #: src/emc/usr_intf/pncconf/pncconf.glade:38183 #: src/emc/usr_intf/pncconf/pncconf.glade:38246 #: src/emc/usr_intf/pncconf/pncconf.glade:38520 #: src/emc/usr_intf/pncconf/pncconf.glade:42530 #: src/emc/usr_intf/pncconf/pncconf.glade:42593 #: src/emc/usr_intf/pncconf/pncconf.glade:42749 #: src/emc/usr_intf/pncconf/pncconf.glade:42811 #: src/emc/usr_intf/pncconf/pncconf.glade:46924 #: src/emc/usr_intf/pncconf/pncconf.glade:49453 #: src/emc/usr_intf/pncconf/pncconf.glade:49516 #: src/emc/usr_intf/pncconf/pncconf.glade:49672 #: src/emc/usr_intf/pncconf/pncconf.glade:49734 #: src/emc/usr_intf/pncconf/pncconf.glade:53847 #: emc/usr_intf/pncconf/pncconf.glade:2222 #: emc/usr_intf/pncconf/pncconf.glade:2284 #: emc/usr_intf/pncconf/pncconf.glade:7173 #: emc/usr_intf/pncconf/pncconf.glade:7237 #: emc/usr_intf/pncconf/pncconf.glade:9810 #: emc/usr_intf/pncconf/pncconf.glade:9874 #: emc/usr_intf/pncconf/pncconf.glade:12447 #: emc/usr_intf/pncconf/pncconf.glade:12511 #, fuzzy msgid "Inv" msgstr "Invertieren" #: src/emc/usr_intf/pncconf/pncconf.glade:11198 msgid "" " I/O\n" "Connector 2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:13811 msgid "" " I/O\n" " Connector 3" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:14012 #: src/emc/usr_intf/pncconf/pncconf.glade:14039 #: src/emc/usr_intf/pncconf/pncconf.glade:14053 #: src/emc/usr_intf/pncconf/pncconf.glade:28632 #: src/emc/usr_intf/pncconf/pncconf.glade:28646 #: src/emc/usr_intf/pncconf/pncconf.glade:28673 #: src/emc/usr_intf/pncconf/pncconf.glade:28980 #: src/emc/usr_intf/pncconf/pncconf.glade:29007 #: src/emc/usr_intf/pncconf/pncconf.glade:29021 #: src/emc/usr_intf/pncconf/pncconf.glade:32951 #: src/emc/usr_intf/pncconf/pncconf.glade:32965 #: src/emc/usr_intf/pncconf/pncconf.glade:32992 #: src/emc/usr_intf/pncconf/pncconf.glade:33338 #: src/emc/usr_intf/pncconf/pncconf.glade:33365 #: src/emc/usr_intf/pncconf/pncconf.glade:33379 #: src/emc/usr_intf/pncconf/pncconf.glade:38129 #: src/emc/usr_intf/pncconf/pncconf.glade:38143 #: src/emc/usr_intf/pncconf/pncconf.glade:38170 #: src/emc/usr_intf/pncconf/pncconf.glade:38594 #: src/emc/usr_intf/pncconf/pncconf.glade:38621 #: src/emc/usr_intf/pncconf/pncconf.glade:38635 #: src/emc/usr_intf/pncconf/pncconf.glade:42476 #: src/emc/usr_intf/pncconf/pncconf.glade:42490 #: src/emc/usr_intf/pncconf/pncconf.glade:42517 #: src/emc/usr_intf/pncconf/pncconf.glade:42824 #: src/emc/usr_intf/pncconf/pncconf.glade:42851 #: src/emc/usr_intf/pncconf/pncconf.glade:42865 #: src/emc/usr_intf/pncconf/pncconf.glade:46808 #: src/emc/usr_intf/pncconf/pncconf.glade:46822 #: src/emc/usr_intf/pncconf/pncconf.glade:46849 #: src/emc/usr_intf/pncconf/pncconf.glade:49399 #: src/emc/usr_intf/pncconf/pncconf.glade:49413 #: src/emc/usr_intf/pncconf/pncconf.glade:49440 #: src/emc/usr_intf/pncconf/pncconf.glade:49747 #: src/emc/usr_intf/pncconf/pncconf.glade:49774 #: src/emc/usr_intf/pncconf/pncconf.glade:49788 #: src/emc/usr_intf/pncconf/pncconf.glade:53731 #: src/emc/usr_intf/pncconf/pncconf.glade:53745 #: src/emc/usr_intf/pncconf/pncconf.glade:53772 msgid " " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:16403 msgid "" " I/O\n" " Connector 4" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:19017 msgid "" " I/O\n" " Connector 5" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:20813 msgid "" " I/O\n" "Connector 6" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:22609 msgid "" " I/O\n" "Connector 7" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:24405 msgid "" " I/O\n" "Connector 8" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:26201 msgid "" " I/O\n" " Connector 9" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:28775 #: src/emc/usr_intf/pncconf/pncconf.glade:35696 #: src/emc/usr_intf/pncconf/pncconf.glade:42619 #: src/emc/usr_intf/pncconf/pncconf.glade:49542 msgid "page 1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:31354 #: src/emc/usr_intf/pncconf/pncconf.glade:38275 #: src/emc/usr_intf/pncconf/pncconf.glade:45198 #: src/emc/usr_intf/pncconf/pncconf.glade:52121 msgid "page 2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:33107 #: src/emc/usr_intf/pncconf/pncconf.glade:40030 #: src/emc/usr_intf/pncconf/pncconf.glade:46953 #: src/emc/usr_intf/pncconf/pncconf.glade:53876 msgid "page 3" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:33123 msgid "Smart Serial 0" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:40046 msgid "Smart Serial 1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:46969 msgid "Smart Serial 2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:53892 msgid "Smart Serial 3" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:53914 #: emc/usr_intf/pncconf/pncconf.glade:12563 #, fuzzy msgid "First Parallel Port Setup" msgstr "Konfiguration der Druckerschnittstelle" #: src/emc/usr_intf/pncconf/pncconf.glade:53998 #: emc/usr_intf/pncconf/pncconf.glade:14631 #, fuzzy msgid "Outputs (PC to Machine):" msgstr "Ausgänge (vom PC zur Maschine)" #: src/emc/usr_intf/pncconf/pncconf.glade:54552 #: emc/usr_intf/pncconf/pncconf.glade:14076 #, fuzzy msgid "Inputs (Machine to PC):" msgstr "Eingänge (von der Maschine zum PC)" #: src/emc/usr_intf/pncconf/pncconf.glade:55977 #: emc/usr_intf/pncconf/pncconf.glade:12648 msgid "Launch Test Panel" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56003 #: emc/usr_intf/pncconf/pncconf.glade:14652 #, fuzzy msgid "X Axis Motor/Encoder Configuration" msgstr "Konfiguration der X-Achse" #: src/emc/usr_intf/pncconf/pncconf.glade:56091 #: emc/usr_intf/pncconf/pncconf.glade:15095 #: emc/usr_intf/pncconf/pncconf.glade:17322 msgid "D" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56104 #: emc/usr_intf/pncconf/pncconf.glade:15082 #: emc/usr_intf/pncconf/pncconf.glade:17309 #, fuzzy msgid "I" msgstr "Ein-/Ausgänge" #: src/emc/usr_intf/pncconf/pncconf.glade:56117 #: emc/usr_intf/pncconf/pncconf.glade:15071 #: emc/usr_intf/pncconf/pncconf.glade:17298 msgid "P" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56128 #: src/emc/usr_intf/pncconf/pncconf.glade:60917 #: src/emc/usr_intf/pncconf/pncconf.glade:62202 #: src/emc/usr_intf/pncconf/pncconf.glade:63103 #: src/emc/usr_intf/pncconf/pncconf.glade:64388 #: src/emc/usr_intf/pncconf/pncconf.glade:65265 #: emc/usr_intf/pncconf/pncconf.glade:15058 #: emc/usr_intf/pncconf/pncconf.glade:17285 #: emc/usr_intf/pncconf/pncconf.glade:20849 msgid "Bias" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56141 #: emc/usr_intf/pncconf/pncconf.glade:15045 #: emc/usr_intf/pncconf/pncconf.glade:17272 msgid "Deadband" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56188 #: src/emc/usr_intf/pncconf/pncconf.glade:61128 #: src/emc/usr_intf/pncconf/pncconf.glade:61991 #: src/emc/usr_intf/pncconf/pncconf.glade:63314 #: src/emc/usr_intf/pncconf/pncconf.glade:64177 #: src/emc/usr_intf/pncconf/pncconf.glade:65470 #: emc/usr_intf/pncconf/pncconf.glade:14998 #: emc/usr_intf/pncconf/pncconf.glade:17225 #: emc/usr_intf/pncconf/pncconf.glade:20644 #: emc/usr_intf/pncconf/pncconf.glade:21811 #: emc/usr_intf/pncconf/pncconf.glade:22511 #: emc/usr_intf/pncconf/pncconf.glade:23211 #, fuzzy msgid "FF0" msgstr "AUS" #: src/emc/usr_intf/pncconf/pncconf.glade:56201 #: src/emc/usr_intf/pncconf/pncconf.glade:61118 #: src/emc/usr_intf/pncconf/pncconf.glade:62001 #: src/emc/usr_intf/pncconf/pncconf.glade:63304 #: src/emc/usr_intf/pncconf/pncconf.glade:64187 #: src/emc/usr_intf/pncconf/pncconf.glade:65460 #: emc/usr_intf/pncconf/pncconf.glade:14985 #: emc/usr_intf/pncconf/pncconf.glade:17212 #: emc/usr_intf/pncconf/pncconf.glade:20654 #: emc/usr_intf/pncconf/pncconf.glade:21801 #: emc/usr_intf/pncconf/pncconf.glade:22501 #: emc/usr_intf/pncconf/pncconf.glade:23201 #, fuzzy msgid "FF1" msgstr "AUS" #: src/emc/usr_intf/pncconf/pncconf.glade:56214 #: src/emc/usr_intf/pncconf/pncconf.glade:61108 #: src/emc/usr_intf/pncconf/pncconf.glade:62011 #: src/emc/usr_intf/pncconf/pncconf.glade:63294 #: src/emc/usr_intf/pncconf/pncconf.glade:64197 #: src/emc/usr_intf/pncconf/pncconf.glade:65450 #: emc/usr_intf/pncconf/pncconf.glade:14972 #: emc/usr_intf/pncconf/pncconf.glade:17199 #: emc/usr_intf/pncconf/pncconf.glade:20664 #: emc/usr_intf/pncconf/pncconf.glade:21791 #: emc/usr_intf/pncconf/pncconf.glade:22491 #: emc/usr_intf/pncconf/pncconf.glade:23191 #, fuzzy msgid "FF2" msgstr "AUS" #: src/emc/usr_intf/pncconf/pncconf.glade:56282 #: emc/usr_intf/pncconf/pncconf.glade:15160 #: emc/usr_intf/pncconf/pncconf.glade:17387 #, fuzzy msgid "Servo Info" msgstr "Werkzeug-Info" #: src/emc/usr_intf/pncconf/pncconf.glade:56362 #, fuzzy msgid "Spindle Max Output:" msgstr "Spindel ein" #: src/emc/usr_intf/pncconf/pncconf.glade:56412 #, fuzzy msgid "Spindle Max limit:" msgstr "SPINDEL SCHNELLER" #: src/emc/usr_intf/pncconf/pncconf.glade:56426 #, fuzzy msgid "Spindle Min Limit:" msgstr "Spindel PWM" #: src/emc/usr_intf/pncconf/pncconf.glade:56456 msgid "" "Open Loop\n" " Test" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56557 #, fuzzy msgid "Quad Pulses / Rev:" msgstr "mm / Umdrehung" #: src/emc/usr_intf/pncconf/pncconf.glade:56572 #: emc/usr_intf/pncconf/pncconf.glade:14866 #: emc/usr_intf/pncconf/pncconf.glade:17094 msgid "Dac Max Output:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56586 #: emc/usr_intf/pncconf/pncconf.glade:14896 #: emc/usr_intf/pncconf/pncconf.glade:17123 msgid "Dac Output Scale:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56599 msgid "3pwm Deadtime:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56612 #, fuzzy msgid "3pwm Scale:" msgstr "Scale" #: src/emc/usr_intf/pncconf/pncconf.glade:56626 #, fuzzy msgid "Output Info" msgstr "Offset-Info" #: src/emc/usr_intf/pncconf/pncconf.glade:56691 #: emc/usr_intf/pncconf/pncconf.glade:15372 #: emc/usr_intf/pncconf/pncconf.glade:17597 #, fuzzy msgid "Driver Type:" msgstr "En_dstufe:" #: src/emc/usr_intf/pncconf/pncconf.glade:56735 #: emc/usr_intf/pncconf/pncconf.glade:15267 #: emc/usr_intf/pncconf/pncconf.glade:17494 #, fuzzy msgid "Direction Setup" msgstr "Zeit zwischen Richtungs_wechsel und Schritt:" #: src/emc/usr_intf/pncconf/pncconf.glade:56748 #: emc/usr_intf/pncconf/pncconf.glade:15254 #: emc/usr_intf/pncconf/pncconf.glade:17481 #, fuzzy msgid "Direction Hold" msgstr "Zeit zwischen Schritt und _Richtungswechsel:" #: src/emc/usr_intf/pncconf/pncconf.glade:56791 #: emc/usr_intf/pncconf/pncconf.glade:15211 #: emc/usr_intf/pncconf/pncconf.glade:17438 #, fuzzy msgid "Step Space" msgstr "Zeit zwischen zwei _Schritten:" #: src/emc/usr_intf/pncconf/pncconf.glade:56804 #: emc/usr_intf/pncconf/pncconf.glade:15198 #: emc/usr_intf/pncconf/pncconf.glade:17425 #, fuzzy msgid "Step On-Time" msgstr "_Länge eines Schritts:" #: src/emc/usr_intf/pncconf/pncconf.glade:56820 #: emc/usr_intf/pncconf/pncconf.glade:15405 #: emc/usr_intf/pncconf/pncconf.glade:17629 msgid "Stepper Info" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56871 msgid "No feedback" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56881 msgid "Absolute Feedback" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56895 #, fuzzy msgid "Incremental Feedback" msgstr "Intervall" #: src/emc/usr_intf/pncconf/pncconf.glade:56909 #, fuzzy msgid "Incremental Encoder" msgstr "Bild invertieren" #: src/emc/usr_intf/pncconf/pncconf.glade:56921 msgid "Hall sensors" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56933 msgid "Fanuc Red Cap " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:56945 #, fuzzy msgid "Use encoder Index" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.glade:56976 msgid "Input Options" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57000 #, fuzzy msgid "Digital instead of PWM outputs" msgstr "Gewählter Digitaleingang liegt außerhalb des gültigen Bereichs" #: src/emc/usr_intf/pncconf/pncconf.glade:57009 msgid "6 outputs instead of 3 " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57021 msgid "Force Trapezoid Mode" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57033 msgid "Emulate feedback " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57045 msgid "Emulated Hall sensors" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57058 msgid "Emulated Fanuc Red Cap" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57085 #, fuzzy msgid "8i20 Max Current" msgstr "Ausschneiden" #: src/emc/usr_intf/pncconf/pncconf.glade:57119 msgid "Output Options" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57153 msgid "Poles" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57163 #, fuzzy msgid "Encoder-offset" msgstr "Ende" #: src/emc/usr_intf/pncconf/pncconf.glade:57173 msgid "Drive-offset" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57183 msgid "output-pattern" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57193 msgid "Input-pattern" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57203 #, fuzzy msgid "Reverse" msgstr "SPINDEL RÜCKWÄRTS" #: src/emc/usr_intf/pncconf/pncconf.glade:57303 msgid "lead angle" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57313 msgid "alignment current" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57354 #, fuzzy msgid "Configuration" msgstr "Konfiguration *" #: src/emc/usr_intf/pncconf/pncconf.glade:57389 msgid "Use Brushless Motor Control" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57425 #, fuzzy msgid "Scale:" msgstr "Scale" #: src/emc/usr_intf/pncconf/pncconf.glade:57446 #, fuzzy msgid "% " msgstr "%" #: src/emc/usr_intf/pncconf/pncconf.glade:57466 #, fuzzy msgid "Use Spindle-At-Speed" msgstr "Spindelencoder Index" #: src/emc/usr_intf/pncconf/pncconf.glade:57491 #, fuzzy msgid "Filter gain:" msgstr "Konvertierung fehlgeschlagen" #: src/emc/usr_intf/pncconf/pncconf.glade:57526 msgid "Spindle Display Filter Settings" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57577 #, fuzzy msgid "Single Input Encoder" msgstr "Bild invertieren" #: src/emc/usr_intf/pncconf/pncconf.glade:57631 #: emc/usr_intf/pncconf/pncconf.glade:15698 #: emc/usr_intf/pncconf/pncconf.glade:17858 msgid "Invert Encoder Direction " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57646 #: emc/usr_intf/pncconf/pncconf.glade:15713 #: emc/usr_intf/pncconf/pncconf.glade:17873 #, fuzzy msgid "Invert Motor Direction" msgstr "Abtastrichtung" #: src/emc/usr_intf/pncconf/pncconf.glade:57661 #: emc/usr_intf/pncconf/pncconf.glade:15728 msgid "Feed Speed Following Error:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57675 #: emc/usr_intf/pncconf/pncconf.glade:15742 #: emc/usr_intf/pncconf/pncconf.glade:17888 msgid "Rapid Speed Following Error:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57715 msgid "" "Calculate\n" "Scale" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57744 #, fuzzy msgid "Stepper Scale:" msgstr "Zeit zwischen zwei _Schritten:" #: src/emc/usr_intf/pncconf/pncconf.glade:57771 msgid "encoder Scale:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:57928 #: emc/usr_intf/pncconf/pncconf.glade:16185 #: emc/usr_intf/pncconf/pncconf.glade:18383 msgid "Test / Tune Axis" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58235 msgid "Positive Travel Distance (Machine zero Origin to end of + travel): " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58251 #: emc/usr_intf/pncconf/pncconf.glade:16757 #, fuzzy msgid "Home Search Velocity:" msgstr "Gesch_windigkeit Referenzfahrt:" #: src/emc/usr_intf/pncconf/pncconf.glade:58266 msgid "Home Switch location (Offset from machine zero Origin):" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58310 msgid "Negative Travel Distance (Machine zero Origin to end of - travel): " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58326 msgid "Home Position location (offset from machine zero Origin):" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58355 #: emc/usr_intf/pncconf/pncconf.glade:16786 msgid "Use Backlash Compensation:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58369 #: emc/usr_intf/pncconf/pncconf.glade:16772 msgid "Use Compensation File:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58412 #: emc/usr_intf/pncconf/pncconf.glade:16816 msgid "" "Type 1\n" "Type 2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58427 #: emc/usr_intf/pncconf/pncconf.glade:16846 msgid "filename:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58455 #: emc/usr_intf/pncconf/pncconf.glade:16648 #, fuzzy msgid "Home latch Velocity:" msgstr "Gesch_windigkeit Referenzfahrt:" #: src/emc/usr_intf/pncconf/pncconf.glade:58494 #, fuzzy msgid "Home Search Direction:" msgstr "Ric_htung beim Übernehmen des Referenzpunkt:" #: src/emc/usr_intf/pncconf/pncconf.glade:58507 msgid "" "Towards Negative limit\n" "Towards Positive limit" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58523 #: emc/usr_intf/pncconf/pncconf.glade:16674 #, fuzzy msgid "Home Latch Direction:" msgstr "Ric_htung beim Übernehmen des Referenzpunkt:" #: src/emc/usr_intf/pncconf/pncconf.glade:58552 #: emc/usr_intf/pncconf/pncconf.glade:16495 #, fuzzy msgid "Home Final Velocity:" msgstr "Gesch_windigkeit Referenzfahrt:" #: src/emc/usr_intf/pncconf/pncconf.glade:58591 #: emc/usr_intf/pncconf/pncconf.glade:16521 msgid "Use Encoder Index For Home:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58603 #: emc/usr_intf/pncconf/pncconf.glade:16505 msgid "" "NO\n" "YES" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58628 #: emc/usr_intf/pncconf/pncconf.glade:18437 #, fuzzy msgid "Advanced Options" msgstr "Erweiterte Konfiguration" #: src/emc/usr_intf/pncconf/pncconf.glade:58712 #: emc/usr_intf/pncconf/pncconf.glade:18851 msgid "Cmd 1" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58718 #: emc/usr_intf/pncconf/pncconf.glade:18841 msgid "Cmd 2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58728 #: emc/usr_intf/pncconf/pncconf.glade:18831 msgid "Cmd 3" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58738 #: emc/usr_intf/pncconf/pncconf.glade:18821 msgid "Cmd 4" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58748 #: emc/usr_intf/pncconf/pncconf.glade:18811 msgid "Cmd 5" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58874 #: emc/usr_intf/pncconf/pncconf.glade:18685 msgid "Cmd 6" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58884 #: emc/usr_intf/pncconf/pncconf.glade:18673 msgid "Cmd 7" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58896 #: emc/usr_intf/pncconf/pncconf.glade:18661 msgid "Cmd 8" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58908 #: emc/usr_intf/pncconf/pncconf.glade:18649 msgid "Cmd 9" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58920 #: emc/usr_intf/pncconf/pncconf.glade:18637 msgid "Cmd 10" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:58990 #: emc/usr_intf/pncconf/pncconf.glade:18569 msgid "Cmd 11" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59000 #: emc/usr_intf/pncconf/pncconf.glade:18557 msgid "Cmd 12" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59012 #: emc/usr_intf/pncconf/pncconf.glade:18545 msgid "Cmd 13" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59024 #: emc/usr_intf/pncconf/pncconf.glade:18533 msgid "Cmd 14" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59036 #: emc/usr_intf/pncconf/pncconf.glade:18521 msgid "Cmd 15" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59053 #: emc/usr_intf/pncconf/pncconf.glade:18862 #, fuzzy msgid "Include Halui user interface component / commands" msgstr "HalUI-Fenster einbinden" #: src/emc/usr_intf/pncconf/pncconf.glade:59127 #, fuzzy msgid "Number of digital (bit) in pins:" msgstr "Digitale Eingänge:" #: src/emc/usr_intf/pncconf/pncconf.glade:59138 #, fuzzy msgid "Number of digital (bit) out pins:" msgstr "Digitale Ausgänge:" #: src/emc/usr_intf/pncconf/pncconf.glade:59308 #, fuzzy msgid "Setup number of external pins" msgstr "Digitale Eingänge:" #: src/emc/usr_intf/pncconf/pncconf.glade:59360 msgid "Z Auto Touch off program" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59505 msgid "HAL Component Page" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59648 msgid "lowpass" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59675 msgid "mux16" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59702 #: emc/usr_intf/pncconf/pncconf.glade:19576 msgid "scale" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59728 #: emc/usr_intf/pncconf/pncconf.glade:19497 #, fuzzy msgid "PID" msgstr "MAXIMAL" #: src/emc/usr_intf/pncconf/pncconf.glade:59739 #: emc/usr_intf/pncconf/pncconf.glade:19457 msgid "number of components" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59767 #: emc/usr_intf/pncconf/pncconf.glade:19433 msgid "Component" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59794 msgid "Add HAL components with this page." msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:59844 #, fuzzy msgid "Thread Command" msgstr "Befehlskennung:" #: src/emc/usr_intf/pncconf/pncconf.glade:59854 #, fuzzy msgid "Thread Speed" msgstr "Thread" #: src/emc/usr_intf/pncconf/pncconf.glade:59906 #, fuzzy msgid "Load Command " msgstr "Befehlsnummer:" #: src/emc/usr_intf/pncconf/pncconf.glade:59952 #, fuzzy msgid "Servo Thread" msgstr "Thread" #: src/emc/usr_intf/pncconf/pncconf.glade:59965 #, fuzzy msgid "Base Thread" msgstr "Thread" #: src/emc/usr_intf/pncconf/pncconf.glade:59979 msgid "Custom Components Commands" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:60031 #: emc/usr_intf/pncconf/pncconf.glade:19880 msgid "" " Motor Encoder Test\n" "Warning limits switches \n" " Will not be obeyed" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:60067 #: src/emc/usr_intf/pncconf/pncconf.glade:60766 #: src/emc/usr_intf/pncconf/pncconf.glade:61859 #: src/emc/usr_intf/pncconf/pncconf.glade:62952 #: src/emc/usr_intf/pncconf/pncconf.glade:64045 #: src/emc/usr_intf/pncconf/pncconf.glade:65025 #: emc/usr_intf/pncconf/pncconf.glade:19975 #, fuzzy msgid "Invert Motor" msgstr "Invertieren" #: src/emc/usr_intf/pncconf/pncconf.glade:60083 #: src/emc/usr_intf/pncconf/pncconf.glade:60782 #: src/emc/usr_intf/pncconf/pncconf.glade:61875 #: src/emc/usr_intf/pncconf/pncconf.glade:62968 #: src/emc/usr_intf/pncconf/pncconf.glade:64061 #: src/emc/usr_intf/pncconf/pncconf.glade:65040 #: emc/usr_intf/pncconf/pncconf.glade:20016 #, fuzzy msgid "Invert Encoder" msgstr "Bild invertieren" #: src/emc/usr_intf/pncconf/pncconf.glade:60100 msgid "Enable Amp" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:60114 #: emc/usr_intf/pncconf/pncconf.glade:20037 msgid "Reset Encoder" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:60142 #, fuzzy msgid "Encoder Scale:" msgstr "Ende" #: src/emc/usr_intf/pncconf/pncconf.glade:60153 #, fuzzy msgid "Dac Offset:" msgstr "Werkzeugoffset:" #: src/emc/usr_intf/pncconf/pncconf.glade:60243 #: emc/usr_intf/pncconf/pncconf.glade:19960 msgid "Fast Dac Speed" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:60258 #: emc/usr_intf/pncconf/pncconf.glade:19944 msgid "Slow Dac Speed" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:60407 #: src/emc/usr_intf/pncconf/pncconf.glade:61503 #: src/emc/usr_intf/pncconf/pncconf.glade:62596 #: src/emc/usr_intf/pncconf/pncconf.glade:63689 #: src/emc/usr_intf/pncconf/pncconf.glade:64788 #: emc/usr_intf/pncconf/pncconf.glade:20416 #: emc/usr_intf/pncconf/pncconf.glade:21439 #: emc/usr_intf/pncconf/pncconf.glade:22139 #: emc/usr_intf/pncconf/pncconf.glade:22839 msgid "mm/minute" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:60441 #: src/emc/usr_intf/pncconf/pncconf.glade:61536 #: src/emc/usr_intf/pncconf/pncconf.glade:62629 #: src/emc/usr_intf/pncconf/pncconf.glade:63722 #: src/emc/usr_intf/pncconf/pncconf.glade:64821 #: emc/usr_intf/pncconf/pncconf.glade:20381 #: emc/usr_intf/pncconf/pncconf.glade:21404 #: emc/usr_intf/pncconf/pncconf.glade:22104 #: emc/usr_intf/pncconf/pncconf.glade:22804 msgid "mm/minute^2" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:60550 #: src/emc/usr_intf/pncconf/pncconf.glade:61644 #: src/emc/usr_intf/pncconf/pncconf.glade:62737 #: src/emc/usr_intf/pncconf/pncconf.glade:64930 msgid "Enable" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:60600 #: src/emc/usr_intf/pncconf/pncconf.glade:61693 #: src/emc/usr_intf/pncconf/pncconf.glade:62786 #: src/emc/usr_intf/pncconf/pncconf.glade:63879 #: src/emc/usr_intf/pncconf/pncconf.glade:65139 #: emc/usr_intf/pncconf/pncconf.glade:20202 #: emc/usr_intf/pncconf/pncconf.glade:21225 #: emc/usr_intf/pncconf/pncconf.glade:21925 #: emc/usr_intf/pncconf/pncconf.glade:22625 #, fuzzy msgid "Seconds" msgstr "Sekundär" #: src/emc/usr_intf/pncconf/pncconf.glade:60907 #: src/emc/usr_intf/pncconf/pncconf.glade:62212 #: src/emc/usr_intf/pncconf/pncconf.glade:63093 #: src/emc/usr_intf/pncconf/pncconf.glade:64398 #: src/emc/usr_intf/pncconf/pncconf.glade:65255 #: emc/usr_intf/pncconf/pncconf.glade:20859 msgid "DeadBand" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:61089 #: src/emc/usr_intf/pncconf/pncconf.glade:61380 #: src/emc/usr_intf/pncconf/pncconf.glade:62030 #: src/emc/usr_intf/pncconf/pncconf.glade:62401 #: src/emc/usr_intf/pncconf/pncconf.glade:63275 #: src/emc/usr_intf/pncconf/pncconf.glade:63562 #: src/emc/usr_intf/pncconf/pncconf.glade:64216 #: src/emc/usr_intf/pncconf/pncconf.glade:64587 #: src/emc/usr_intf/pncconf/pncconf.glade:65431 #: src/emc/usr_intf/pncconf/pncconf.glade:65718 #: emc/usr_intf/pncconf/pncconf.glade:20683 #: emc/usr_intf/pncconf/pncconf.glade:21046 #: emc/usr_intf/pncconf/pncconf.glade:21772 #: emc/usr_intf/pncconf/pncconf.glade:22472 #: emc/usr_intf/pncconf/pncconf.glade:23172 msgid "Original" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:61138 #: src/emc/usr_intf/pncconf/pncconf.glade:61981 #: src/emc/usr_intf/pncconf/pncconf.glade:63324 #: src/emc/usr_intf/pncconf/pncconf.glade:64167 #: src/emc/usr_intf/pncconf/pncconf.glade:65480 #: emc/usr_intf/pncconf/pncconf.glade:20634 #: emc/usr_intf/pncconf/pncconf.glade:21821 #: emc/usr_intf/pncconf/pncconf.glade:22521 #: emc/usr_intf/pncconf/pncconf.glade:23221 #, fuzzy msgid "D:" msgstr "MDI:" #: src/emc/usr_intf/pncconf/pncconf.glade:61148 #: src/emc/usr_intf/pncconf/pncconf.glade:61971 #: src/emc/usr_intf/pncconf/pncconf.glade:63334 #: src/emc/usr_intf/pncconf/pncconf.glade:64157 #: src/emc/usr_intf/pncconf/pncconf.glade:65490 #: emc/usr_intf/pncconf/pncconf.glade:20624 #: emc/usr_intf/pncconf/pncconf.glade:21831 #: emc/usr_intf/pncconf/pncconf.glade:22531 #: emc/usr_intf/pncconf/pncconf.glade:23231 #, fuzzy msgid "I:" msgstr "MDI:" #: src/emc/usr_intf/pncconf/pncconf.glade:61158 #: src/emc/usr_intf/pncconf/pncconf.glade:61961 #: src/emc/usr_intf/pncconf/pncconf.glade:63344 #: src/emc/usr_intf/pncconf/pncconf.glade:64147 #: src/emc/usr_intf/pncconf/pncconf.glade:65500 #: emc/usr_intf/pncconf/pncconf.glade:20614 #: emc/usr_intf/pncconf/pncconf.glade:21841 #: emc/usr_intf/pncconf/pncconf.glade:22541 #: emc/usr_intf/pncconf/pncconf.glade:23241 msgid "P:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:61168 #: src/emc/usr_intf/pncconf/pncconf.glade:61392 #: src/emc/usr_intf/pncconf/pncconf.glade:61951 #: src/emc/usr_intf/pncconf/pncconf.glade:62389 #: src/emc/usr_intf/pncconf/pncconf.glade:63354 #: src/emc/usr_intf/pncconf/pncconf.glade:63574 #: src/emc/usr_intf/pncconf/pncconf.glade:64137 #: src/emc/usr_intf/pncconf/pncconf.glade:64575 #: src/emc/usr_intf/pncconf/pncconf.glade:65510 #: src/emc/usr_intf/pncconf/pncconf.glade:65730 #: emc/usr_intf/pncconf/pncconf.glade:20604 #: emc/usr_intf/pncconf/pncconf.glade:21034 #: emc/usr_intf/pncconf/pncconf.glade:21851 #: emc/usr_intf/pncconf/pncconf.glade:22551 #: emc/usr_intf/pncconf/pncconf.glade:23251 #, fuzzy msgid "Current" msgstr "Ausschneiden" #: src/emc/usr_intf/pncconf/pncconf.glade:61185 #: src/emc/usr_intf/pncconf/pncconf.glade:62278 #: src/emc/usr_intf/pncconf/pncconf.glade:63371 #: src/emc/usr_intf/pncconf/pncconf.glade:64464 #: src/emc/usr_intf/pncconf/pncconf.glade:65527 #: emc/usr_intf/pncconf/pncconf.glade:20923 #, fuzzy msgid "PID Tuning" msgstr "INI-Änderungen speichern" #: src/emc/usr_intf/pncconf/pncconf.glade:61370 #: src/emc/usr_intf/pncconf/pncconf.glade:62413 #: src/emc/usr_intf/pncconf/pncconf.glade:63552 #: src/emc/usr_intf/pncconf/pncconf.glade:64599 #: src/emc/usr_intf/pncconf/pncconf.glade:65708 #: emc/usr_intf/pncconf/pncconf.glade:21058 #, fuzzy msgid "Direction Setup:" msgstr "Zeit zwischen Richtungs_wechsel und Schritt:" #: src/emc/usr_intf/pncconf/pncconf.glade:61404 #: src/emc/usr_intf/pncconf/pncconf.glade:62379 #: src/emc/usr_intf/pncconf/pncconf.glade:63586 #: src/emc/usr_intf/pncconf/pncconf.glade:64565 #: src/emc/usr_intf/pncconf/pncconf.glade:65742 #: emc/usr_intf/pncconf/pncconf.glade:21024 #, fuzzy msgid "Direction Hold:" msgstr "Zeit zwischen Schritt und _Richtungswechsel:" #: src/emc/usr_intf/pncconf/pncconf.glade:61414 #: src/emc/usr_intf/pncconf/pncconf.glade:62369 #: src/emc/usr_intf/pncconf/pncconf.glade:63596 #: src/emc/usr_intf/pncconf/pncconf.glade:64555 #: src/emc/usr_intf/pncconf/pncconf.glade:65752 #: emc/usr_intf/pncconf/pncconf.glade:21014 #, fuzzy msgid "Step Space:" msgstr "Zeit zwischen zwei _Schritten:" #: src/emc/usr_intf/pncconf/pncconf.glade:61424 #: src/emc/usr_intf/pncconf/pncconf.glade:62359 #: src/emc/usr_intf/pncconf/pncconf.glade:63606 #: src/emc/usr_intf/pncconf/pncconf.glade:64545 #: src/emc/usr_intf/pncconf/pncconf.glade:65762 #: emc/usr_intf/pncconf/pncconf.glade:21004 #, fuzzy msgid "Step Time:" msgstr "_Länge eines Schritts:" #: src/emc/usr_intf/pncconf/pncconf.glade:61439 #: src/emc/usr_intf/pncconf/pncconf.glade:62528 #: src/emc/usr_intf/pncconf/pncconf.glade:63621 #: src/emc/usr_intf/pncconf/pncconf.glade:64714 #: src/emc/usr_intf/pncconf/pncconf.glade:65777 #: emc/usr_intf/pncconf/pncconf.glade:21173 #, fuzzy msgid "Step Timing" msgstr "_Länge eines Schritts:" #: src/emc/usr_intf/pncconf/pncconf.glade:63830 msgid "enable" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:65798 #, fuzzy msgid "spindle" msgstr "Spindel:" #: src/emc/usr_intf/pncconf/pncconf.glade:65881 #, fuzzy msgid "Help Page" msgstr "Bilddateien" #: src/emc/usr_intf/pncconf/pncconf.glade:65911 msgid "" "X axis:\n" "Total Travel = 10\n" "Home Offset = Origin to Home Switch distance = 0\n" "Neg Travel Distance = Origin to neg limit distance = 0\n" "Pos Travel Distance = Total Travel - neg travel distance = 10\n" "Home Position = Origin to Home Position distance = 6\n" "\n" "Y axis:\n" "Total Travel = 8\n" "Home Offset = Origin to Home Switch distance = 0\n" "Neg Travel Distance = Origin to neg limit distance = -8\n" "Pos Travel Distance = Total Travel - neg travel distance = 0\n" "Home Position = Origin to Home Position distance = 0\n" "\n" "Z axis:\n" "Total Travel = 12\n" "Home Offset = Origin to Home Switch distance = 0\n" "Neg Travel Distance = Origin to neg limit distance = -12\n" "Pos Travel Distance = Total Travel - neg travel distance = 0\n" "Home Position = Origin to Home Position distance = 0\n" "\n" "Note that the direction indicators on the top right show \n" "movement of the TOOL and on the actual machine,\n" "often it is the table that actually moves. In that case the \n" "directions are opposite of shown.\n" "\n" "Note this is an example, Many other combinations are \n" "possible" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:65951 msgid "Mill" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:65970 msgid "" "Total Travel = 4 + 6 = 10\n" "Z Home Offset = Origin to Home Switch distance = 10\n" "Z Neg Travel Distance = Origin to neg limit distance = 0\n" "Z Pos Travel Distance = Total Travel - neg travel distance = 10\n" "Z Home Position = Origin to Home Position distance = 4\n" "\n" "X axis would be similar but not shown fully for clarity.\n" "This is just a sample reference other switch combinations are\n" "possible." msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:65994 msgid "Lathe" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66010 msgid "Diagram" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66043 #, fuzzy msgid "Output" msgstr "Unbenutzt" #: src/emc/usr_intf/pncconf/pncconf.glade:66123 #: emc/usr_intf/pncconf/pncconf.glade:15310 #: emc/usr_intf/pncconf/pncconf.glade:17537 #, fuzzy msgid "Motor steps per revolution:" msgstr "_Motorschritte pro Umdrehung:" #: src/emc/usr_intf/pncconf/pncconf.glade:66173 #: src/emc/usr_intf/pncconf/pncconf.glade:66459 #, fuzzy msgid "Leadscrew Metric Pitch" msgstr "_Spindelsteigung:" #: src/emc/usr_intf/pncconf/pncconf.glade:66186 msgid "Microstep Multiplication Factor:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66199 #: src/emc/usr_intf/pncconf/pncconf.glade:66481 msgid "Worm turn ratio (Input:Outputl)" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66212 #, fuzzy msgid "Pulley teeth (motor:Leadscrew):" msgstr "_Untersetzung (Zähnezahl am Motor:Spindel):" #: src/emc/usr_intf/pncconf/pncconf.glade:66356 msgid "TPI " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66372 msgid "Step Motor Scale" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66472 #, fuzzy msgid "Pulley teeth (encoder:Leadscrew):" msgstr "_Untersetzung (Zähnezahl am Motor:Spindel):" #: src/emc/usr_intf/pncconf/pncconf.glade:66537 #, fuzzy msgid "Encoder lines per revolution:" msgstr "Encoder-_Takte pro Spindel-Umdrehung:" #: src/emc/usr_intf/pncconf/pncconf.glade:66547 msgid "X 4 = Pulses/Rev" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66651 #, fuzzy msgid "TPI" msgstr "MAXIMAL" #: src/emc/usr_intf/pncconf/pncconf.glade:66667 msgid "Encoder Scale" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66711 #, fuzzy msgid "motor steps per unit:" msgstr "_Motorschritte pro Umdrehung:" #: src/emc/usr_intf/pncconf/pncconf.glade:66721 msgid "encoder pulses per unit:" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66756 msgid " " msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66770 msgid "Calculated Scale" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66848 msgid "xmaxrpm" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66864 msgid "RPM" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:66877 #, fuzzy msgid "Motor RPM at max speed:" msgstr "Schrittfrequenz bei maximaler Geschwindigkeit:" #: src/emc/usr_intf/pncconf/pncconf.glade:66921 #, fuzzy msgid "Calculated Axis SCALE:" msgstr "Maßstab der Achse:" #: src/emc/usr_intf/pncconf/pncconf.glade:66934 #, fuzzy msgid "Khz" msgstr "kHz" #: src/emc/usr_intf/pncconf/pncconf.glade:66949 #: emc/usr_intf/pncconf/pncconf.glade:15968 #: emc/usr_intf/pncconf/pncconf.glade:18099 msgid "sec" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:67049 #: emc/usr_intf/pncconf/pncconf.glade:16068 #, fuzzy msgid "Distance to acheave max speed:" msgstr "Weg bis zum erreichend der maximalen Geschwindigkeit:" #: src/emc/usr_intf/pncconf/pncconf.glade:67077 #: emc/usr_intf/pncconf/pncconf.glade:16113 #: emc/usr_intf/pncconf/pncconf.glade:18195 #, fuzzy msgid "Resolution:" msgstr "Position:" #: src/emc/usr_intf/pncconf/pncconf.glade:67105 #: emc/usr_intf/pncconf/pncconf.py:3315 #: emc/usr_intf/pncconf/pncconf.glade:16141 #: emc/usr_intf/pncconf/pncconf.glade:18223 msgid "mm / encoder pulse" msgstr "" #: src/emc/usr_intf/pncconf/pncconf.glade:67123 #, fuzzy msgid "Motion Data" msgstr "Re_ferenzfahrt" #: src/emc/usr_intf/pncconf/pncconf.glade:67151 #, fuzzy msgid "gtk-cancel" msgstr "Abbrechen" #: src/emc/task/emctaskmain.cc:427 src/emc/task/emctaskmain.cc:460 #: src/emc/task/emctaskmain.cc:467 src/emc/task/emctaskmain.cc:500 #: emc/task/emctaskmain.cc:416 emc/task/emctaskmain.cc:449 #, c-format msgid "%s exceeds +X limit" msgstr "%s überschreitet X+ Limit" #: src/emc/task/emctaskmain.cc:432 src/emc/task/emctaskmain.cc:465 #: src/emc/task/emctaskmain.cc:472 src/emc/task/emctaskmain.cc:505 #: emc/task/emctaskmain.cc:421 emc/task/emctaskmain.cc:454 #, c-format msgid "%s exceeds +Y limit" msgstr "%s überschreitet Y+ Limit" #: src/emc/task/emctaskmain.cc:437 src/emc/task/emctaskmain.cc:470 #: src/emc/task/emctaskmain.cc:477 src/emc/task/emctaskmain.cc:510 #: emc/task/emctaskmain.cc:426 emc/task/emctaskmain.cc:459 #, c-format msgid "%s exceeds +Z limit" msgstr "%s überschreitet Z+ Limit" #: src/emc/task/emctaskmain.cc:442 src/emc/task/emctaskmain.cc:475 #: src/emc/task/emctaskmain.cc:482 src/emc/task/emctaskmain.cc:515 #: emc/task/emctaskmain.cc:431 emc/task/emctaskmain.cc:464 #, c-format msgid "%s exceeds -X limit" msgstr "%s überschreitet X- Limit" #: src/emc/task/emctaskmain.cc:447 src/emc/task/emctaskmain.cc:480 #: src/emc/task/emctaskmain.cc:487 src/emc/task/emctaskmain.cc:520 #: emc/task/emctaskmain.cc:436 emc/task/emctaskmain.cc:469 #, c-format msgid "%s exceeds -Y limit" msgstr "%s überschreitet Y- Limit" #: src/emc/task/emctaskmain.cc:452 src/emc/task/emctaskmain.cc:485 #: src/emc/task/emctaskmain.cc:492 src/emc/task/emctaskmain.cc:525 #: emc/task/emctaskmain.cc:441 emc/task/emctaskmain.cc:474 #, c-format msgid "%s exceeds -Z limit" msgstr "%s überschreitet Z- Limit" #: src/emc/task/emctaskmain.cc:810 src/emc/task/emctaskmain.cc:853 #: emc/task/emctaskmain.cc:746 #, c-format msgid "" "command (%s) cannot be executed until the machine is out of E-stop and " "turned on" msgstr "" "%s kann nicht ausgeführt werden, solange der Notaus aktiv ist und die " "Maschine nicht eingeschaltet ist" #: src/emc/task/emctaskmain.cc:930 src/emc/task/emctaskmain.cc:973 #: emc/task/emctaskmain.cc:863 #, c-format msgid "can't do that (%s) in manual mode" msgstr "%s kann im manuellen Modus nicht ausgeführt werden" #: src/emc/task/emctaskmain.cc:1027 src/emc/task/emctaskmain.cc:1072 #: emc/task/emctaskmain.cc:962 #, c-format msgid "can't do that (%s) in auto mode with the interpreter idle" msgstr "" "%s kann im automatischen Modus nicht ausgeführt werden, wenn der Interpreter " "stillsteht" #: src/emc/task/emctaskmain.cc:1087 src/emc/task/emctaskmain.cc:1132 #: emc/task/emctaskmain.cc:1024 #, c-format msgid "can't do that (%s) in auto mode with the interpreter reading" msgstr "" "%s kann im automatischen Modus nicht ausgeführt werden, wenn der Interpreter " "liest" #: src/emc/task/emctaskmain.cc:1169 src/emc/task/emctaskmain.cc:1216 #: emc/task/emctaskmain.cc:1108 #, c-format msgid "can't do that (%s) in auto mode with the interpreter paused" msgstr "" "%s kann im automatischen Modus nicht ausgeführt werden, wenn der Interpreter " "Pause macht" #: src/emc/task/emctaskmain.cc:1231 src/emc/task/emctaskmain.cc:1278 #: emc/task/emctaskmain.cc:1172 #, c-format msgid "can't do that (%s) in auto mode with the interpreter waiting" msgstr "" "%s kann im automatischen Modus nicht ausgeführt werden, wenn der Interpreter " "wartet" #: src/emc/task/emctaskmain.cc:1321 src/emc/task/emctaskmain.cc:1370 #: emc/task/emctaskmain.cc:1261 #, c-format msgid "can't do that (%s) in MDI mode" msgstr "%s kann im MDI-Modus nicht ausgeführt werden" #: src/emc/task/emctaskmain.cc:1943 src/emc/task/emctaskmain.cc:2015 #: emc/task/emctaskmain.cc:1873 msgid "Can't switch mode while mode is AUTO and interpreter is not IDLE" msgstr "" "Modus kann nicht gewechselt werden, solange er auf AUTO ist und der " "Interpreter stillsteht" #: src/emc/task/emctaskmain.cc:2012 src/emc/task/emctaskmain.cc:2084 #: emc/task/emctaskmain.cc:1942 msgid "Can't issue MDI command when not homed" msgstr "MDI-Befehl kann ohne vorherige Refernzfahrt nicht ausgeführt werden" #: src/emc/task/emctaskmain.cc:2017 src/emc/task/emctaskmain.cc:2089 #: emc/task/emctaskmain.cc:1947 msgid "Must be in MDI mode to issue MDI command" msgstr "MDI-Befehl kann nur im MDI-Modus ausgeführt werden" #: src/emc/task/emctaskmain.cc:2078 src/emc/task/emctaskmain.cc:2151 #: emc/task/emctaskmain.cc:1976 msgid "Can't run a program when not homed" msgstr "Programm kann ohne vorherige Referenzfahrt nicht ausgeführt werden" #: src/emc/rs274ngc/interp_arc.cc:108 src/emc/rs274ngc/rs274ngc_return.hh:160 #: emc/rs274ngc/interp_arc.cc:106 emc/rs274ngc/rs274ngc_return.hh:196 msgid "Zero radius arc" msgstr "Kreis mit Radius Null" #: src/emc/rs274ngc/interp_arc.cc:112 src/emc/rs274ngc/interp_arc.cc:279 #, fuzzy, c-format msgid "" "Radius to end of arc differs from radius to start: start=(%c%.4f,%c%.4f) " "center=(%c%.4f,%c%.4f) end=(%c%.4f,%c%.4f) r1=%.4f r2=%.4f abs_err=%.4g " "rel_err=%.4f%%" msgstr "" "Radius am Kreisanfang unterscheidet sich vom Radius am Kreisende: Anfang=(%c" "%.4f,%c%.4f), Mittelpunkt=(%c%.4f,%c%.4f), Ende=(%c%.4f,%c%.4f), Radius 1=" "%.4f, Radius 2=%.4f" #: src/emc/rs274ngc/interp_check.cc:89 src/emc/rs274ngc/interp_check.cc:90 msgid "G4 not allowed with G2 or G3 because they both use P" msgstr "" #: src/emc/rs274ngc/interp_check.cc:92 src/emc/rs274ngc/interp_check.cc:93 #, fuzzy msgid "Line with G10 does not have L1, L10, L11, L2, or L20" msgstr "Zeile mit G10 enthält kein L2" #: src/emc/rs274ngc/interp_check.cc:93 src/emc/rs274ngc/interp_check.cc:94 #, fuzzy msgid "P value not an integer with G10" msgstr "P-Wert bei Verwendung von G10 L2 ist keine Ganzzahl" #: src/emc/rs274ngc/interp_check.cc:94 src/emc/rs274ngc/interp_check.cc:95 #, fuzzy msgid "P value out of range (0-9) with G10 L2 or L20" msgstr "P-Wert ausserhalb des gültigen Bereichs bei G10 L2" #: src/emc/rs274ngc/interp_check.cc:95 src/emc/rs274ngc/interp_check.cc:96 #, fuzzy msgid "P value out of range with G10 L1 or G10 L10" msgstr "P-Wert ausserhalb des gültigen Bereichs bei G10 L2" #: src/emc/rs274ngc/interp_check.cc:99 src/emc/rs274ngc/interp_check.cc:100 #: emc/rs274ngc/interp_check.cc:97 msgid "Between G5.2 and G5.3 codes, only additional G5.2 codes are allowed." msgstr "" #: src/emc/rs274ngc/interp_check.cc:248 src/emc/rs274ngc/interp_check.cc:258 #, fuzzy msgid "D word with no G41, G41.1, G42, G42.1, or G96 to use it" msgstr "E-Wort ohne zugehörige Angabe von G76 oder M66" #: src/emc/rs274ngc/interp_check.cc:254 src/emc/rs274ngc/interp_check.cc:264 #, fuzzy msgid "E word with no G76, M66, M67 or M68 to use it" msgstr "E-Wort ohne zugehörige Angabe von G76 oder M66" #: src/emc/rs274ngc/interp_check.cc:259 src/emc/rs274ngc/interp_check.cc:269 #, fuzzy msgid "H word with no G43 or G76 to use it" msgstr "E-Wort ohne zugehörige Angabe von G76 oder M66" #: src/emc/rs274ngc/interp_check.cc:265 src/emc/rs274ngc/interp_check.cc:275 #, fuzzy msgid "I word with no G2, G3, G5, G5.1, G10, G76, or G87 to use it" msgstr "" "K-Wort ohne zugehörige Angabe von G2, G3, G33, G33.1, G76, G87, oder G43.1" #: src/emc/rs274ngc/interp_check.cc:271 src/emc/rs274ngc/interp_check.cc:281 #, fuzzy msgid "J word with no G2, G3, G5, G5.1, G10, G76 or G87 to use it" msgstr "J-Wörters ohne zugehörige Angabe von G2, G3 oder G87" #: src/emc/rs274ngc/interp_check.cc:277 src/emc/rs274ngc/interp_check.cc:287 #, fuzzy msgid "K word with no G2, G3, G33, G33.1, G76, or G87 to use it" msgstr "" "K-Wort ohne zugehörige Angabe von G2, G3, G33, G33.1, G76, G87, oder G43.1" #: src/emc/rs274ngc/interp_check.cc:287 src/emc/rs274ngc/interp_check.cc:297 msgid "" "L word with no G10, cutter compensation, canned cycle, digital/analog input, " "or NURBS code" msgstr "" #: src/emc/rs274ngc/interp_check.cc:299 src/emc/rs274ngc/interp_check.cc:309 msgid "" "P word with no G2 G3 G4 G10 G64 G5 G5.2 G76 G82 G86 G88 G89 or M50 M51 M52 " "M53 M62 M63 M64 M65 M66 or user M code to use it" msgstr "" #: src/emc/rs274ngc/interp_check.cc:302 #, fuzzy msgid "P value not an integer with G2 or G3" msgstr "P-Wert bei Verwendung von G10 L2 ist keine Ganzzahl" #: src/emc/rs274ngc/interp_check.cc:304 src/emc/rs274ngc/interp_check.cc:318 #, fuzzy msgid "P value should be 1 or greater with G2 or G3" msgstr "P-Wert ausserhalb des gültigen Bereichs bei G10 L2" #: src/emc/rs274ngc/interp_check.cc:311 #, fuzzy msgid "" "Q word with no G5, G10, G64, G73, G76, G83, M66, M67, M68 or user M code " "that uses it" msgstr "E-Wort ohne zugehörige Angabe von G76 oder M66" #: src/emc/rs274ngc/interp_convert.cc:138 msgid "You must specify both X and Y coordinates for Control Points" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:141 msgid "Can specify P without X and Y only for the first control point" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:144 msgid "Must specify positive weight P for every Control Point" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:147 #, fuzzy msgid "Cannot make a NURBS with 0 feedrate" msgstr "" "Ein Kreisbogen mit einer Vorschubgeschwindigkeit von 0 ist nicht möglich" #: src/emc/rs274ngc/interp_convert.cc:182 #, fuzzy msgid "Cannot use G5.3 without G5.2 first" msgstr "G53 kann nicht mit aktiver Werkzeugbahnkorrektur verwendet werden" #: src/emc/rs274ngc/interp_convert.cc:183 emc/rs274ngc/interp_convert.cc:191 #, c-format msgid "" "You must specify a number of control points at least equal to the order L = %" "d" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:212 emc/rs274ngc/interp_convert.cc:220 #, fuzzy msgid "Cannot convert spline with cutter radius compensation" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:222 emc/rs274ngc/interp_convert.cc:230 msgid "Splines must be in the XY plane" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:227 msgid "Splines may not have motion in Z, A, B, or C" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:231 msgid "Must specify both I and J with G5.1" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:250 msgid "Must specify both I and J, or neither" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:261 msgid "Must specify both P and Q with G5" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:362 emc/rs274ngc/interp_convert.cc:350 msgid "" "The move just after exiting cutter compensation mode must be straight, not " "an arc" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:370 msgid "Cannot do an arc in planes G17.1, G18.1, or G19.1" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:382 #: src/emc/rs274ngc/interp_convert.cc:3909 #: src/emc/rs274ngc/interp_convert.cc:4266 msgid "Cannot feed with zero spindle speed in feed per rev mode" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:393 #: src/emc/rs274ngc/interp_convert.cc:399 #: src/emc/rs274ngc/interp_convert.cc:408 #: src/emc/rs274ngc/interp_convert.cc:414 #: src/emc/rs274ngc/interp_convert.cc:423 #: src/emc/rs274ngc/interp_convert.cc:429 #, fuzzy, c-format msgid "%c word missing in absolute center arc" msgstr "" "Angabe eines F-Wörters zum Fahren eines Kreisbogens im zeitreziproken " "Vorschub-Modus fehlt" #: src/emc/rs274ngc/interp_convert.cc:649 msgid "" "Radius of cutter compensation entry arc is not greater than the tool radius" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:868 #: src/emc/rs274ngc/interp_convert.cc:878 src/emc/rs274ngc/interp_queue.cc:541 #: src/emc/rs274ngc/interp_queue.cc:592 emc/rs274ngc/interp_convert.cc:850 #: emc/rs274ngc/interp_convert.cc:860 emc/rs274ngc/interp_queue.cc:514 msgid "" "Arc move in concave corner cannot be reached by the tool without gouging" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:904 emc/rs274ngc/interp_convert.cc:886 msgid "Arc to arc motion is invalid because the arcs have the same center" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:907 emc/rs274ngc/interp_convert.cc:889 msgid "" "Arc to arc motion makes a corner the compensated tool can't fit in without " "gouging" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:1036 #: src/emc/rs274ngc/interp_convert.cc:1037 #: src/emc/rs274ngc/interp_convert.cc:1038 #: src/emc/rs274ngc/interp_convert.cc:3376 #: src/emc/rs274ngc/interp_convert.cc:3379 #: src/emc/rs274ngc/interp_convert.cc:3382 src/emc/rs274ngc/interp_find.cc:97 #: src/emc/rs274ngc/interp_convert.cc:3733 #: src/emc/rs274ngc/interp_convert.cc:3736 #: src/emc/rs274ngc/interp_convert.cc:3739 #, c-format msgid "Invalid absolute position %5.2f for wrapped rotary axis %c" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:1466 #: src/emc/rs274ngc/interp_convert.cc:1494 emc/rs274ngc/interp_convert.cc:1447 msgid "Cannot change control mode with cutter radius compensation on" msgstr "Modus kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:1579 #: src/emc/rs274ngc/interp_convert.cc:1607 emc/rs274ngc/interp_convert.cc:1560 msgid "Cannot change coordinate systems with cutter radius compensation on" msgstr "" "Koordinatensystem kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt " "werden" #: src/emc/rs274ngc/interp_convert.cc:1823 #: src/emc/rs274ngc/interp_convert.cc:1851 emc/rs274ngc/interp_convert.cc:1807 #, c-format msgid "G%d.1 with no D word" msgstr "G%S.1 ohne D-Wort" #: src/emc/rs274ngc/interp_convert.cc:1826 #: src/emc/rs274ngc/interp_convert.cc:1854 emc/rs274ngc/interp_convert.cc:1810 #, c-format msgid "G%d.1 with L word, but plane is not G18" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:1837 #: src/emc/rs274ngc/interp_convert.cc:1865 emc/rs274ngc/interp_convert.cc:1821 #, c-format msgid "G%d requires D word to be a whole number" msgstr "D-Wort bei G%d muss eine Ganzzahl sein" #: src/emc/rs274ngc/interp_convert.cc:1844 #: src/emc/rs274ngc/interp_convert.cc:1872 emc/rs274ngc/interp_convert.cc:1829 #, c-format msgid "G%d with lathe tool, but plane is not G18" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2228 #: src/emc/rs274ngc/interp_convert.cc:2271 #, fuzzy msgid "Cannot set reference point with cutter compensation in effect" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:2628 #: src/emc/rs274ngc/interp_convert.cc:2885 emc/rs274ngc/interp_convert.cc:2546 #: emc/rs274ngc/interp_convert.cc:2550 #, fuzzy msgid "Cannot set motion output with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:2629 #: src/emc/rs274ngc/interp_convert.cc:2886 msgid "No valid P word with M62" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2633 #: src/emc/rs274ngc/interp_convert.cc:2890 #, fuzzy msgid "Cannot set motion digital output with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:2634 #: src/emc/rs274ngc/interp_convert.cc:2891 msgid "No valid P word with M63" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2638 #: src/emc/rs274ngc/interp_convert.cc:2643 #: src/emc/rs274ngc/interp_convert.cc:2895 #: src/emc/rs274ngc/interp_convert.cc:2900 #, fuzzy msgid "Cannot set auxiliary digital output with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:2639 #: src/emc/rs274ngc/interp_convert.cc:2896 msgid "No valid P word with M64" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2644 #: src/emc/rs274ngc/interp_convert.cc:2901 msgid "No valid P word with M65" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2673 #: src/emc/rs274ngc/interp_convert.cc:2931 msgid "invalid P-word with M66" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2688 #: src/emc/rs274ngc/interp_convert.cc:2946 emc/rs274ngc/interp_convert.cc:2602 #, fuzzy msgid "Cannot wait for digital input with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:2700 #: src/emc/rs274ngc/interp_convert.cc:2958 emc/rs274ngc/interp_convert.cc:2614 #, fuzzy msgid "Cannot wait for analog input with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:2714 #: src/emc/rs274ngc/interp_convert.cc:2973 #, fuzzy msgid "Cannot set motion analog output with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:2715 #: src/emc/rs274ngc/interp_convert.cc:2974 msgid "Invalid analog index with M67" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2721 #: src/emc/rs274ngc/interp_convert.cc:2980 #, fuzzy msgid "Cannot set auxiliary analog output with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:2722 #: src/emc/rs274ngc/interp_convert.cc:2981 msgid "Invalid analog index with M68" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2733 emc/rs274ngc/interp_convert.cc:2633 msgid "Need positive Q-word to specify tool number with M61" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2806 #: src/emc/rs274ngc/interp_convert.cc:2823 #: src/emc/rs274ngc/interp_convert.cc:2837 #: src/emc/rs274ngc/interp_convert.cc:2851 #: src/emc/rs274ngc/interp_convert.cc:2865 #: src/emc/rs274ngc/interp_convert.cc:3156 #: src/emc/rs274ngc/interp_convert.cc:3173 #: src/emc/rs274ngc/interp_convert.cc:3188 #: src/emc/rs274ngc/interp_convert.cc:3202 #: src/emc/rs274ngc/interp_convert.cc:3216 emc/rs274ngc/interp_convert.cc:2706 #: emc/rs274ngc/interp_convert.cc:2723 emc/rs274ngc/interp_convert.cc:2737 #: emc/rs274ngc/interp_convert.cc:2751 emc/rs274ngc/interp_convert.cc:2765 #, fuzzy msgid "Cannot enable overrides with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:2813 #: src/emc/rs274ngc/interp_convert.cc:2828 #: src/emc/rs274ngc/interp_convert.cc:2842 #: src/emc/rs274ngc/interp_convert.cc:2856 #: src/emc/rs274ngc/interp_convert.cc:2870 #: src/emc/rs274ngc/interp_convert.cc:3163 #: src/emc/rs274ngc/interp_convert.cc:3178 #: src/emc/rs274ngc/interp_convert.cc:3193 #: src/emc/rs274ngc/interp_convert.cc:3207 #: src/emc/rs274ngc/interp_convert.cc:3221 emc/rs274ngc/interp_convert.cc:2713 #: emc/rs274ngc/interp_convert.cc:2728 emc/rs274ngc/interp_convert.cc:2742 #: emc/rs274ngc/interp_convert.cc:2756 emc/rs274ngc/interp_convert.cc:2770 #, fuzzy msgid "Cannot disable overrides with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:2970 #: src/emc/rs274ngc/interp_convert.cc:2971 #: src/emc/rs274ngc/interp_convert.cc:2972 #: src/emc/rs274ngc/interp_convert.cc:3325 #: src/emc/rs274ngc/interp_convert.cc:3326 #: src/emc/rs274ngc/interp_convert.cc:3327 #, c-format msgid "Indexing axis %c can only be moved with G0" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2979 #: src/emc/rs274ngc/interp_convert.cc:2981 #: src/emc/rs274ngc/interp_convert.cc:2983 #: src/emc/rs274ngc/interp_convert.cc:3334 #: src/emc/rs274ngc/interp_convert.cc:3336 #: src/emc/rs274ngc/interp_convert.cc:3338 #, c-format msgid "Indexing axis %c can only be moved alone" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:3076 #: src/emc/rs274ngc/interp_convert.cc:3433 #, fuzzy msgid "Cannot probe with feed per rev mode" msgstr "Abtast-Fahrt mit einer Verfahrgeschwindigkeit von 0 nicht möglich" #: src/emc/rs274ngc/interp_convert.cc:3124 #: src/emc/rs274ngc/interp_convert.cc:3481 emc/rs274ngc/interp_convert.cc:3010 #, fuzzy msgid "Cannot change retract mode with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:3158 #: src/emc/rs274ngc/interp_convert.cc:3515 msgid "G10 L1 without offsets has no effect" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:3264 #: src/emc/rs274ngc/interp_convert.cc:3621 msgid "Q number in G10 is not an integer" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:3265 #: src/emc/rs274ngc/interp_convert.cc:3622 msgid "Invalid tool orientation" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:3364 #: src/emc/rs274ngc/interp_convert.cc:3721 #, fuzzy msgid "I J words not allowed with G10 L2" msgstr "" "Befehle G43.1, G41 R, und G42 R dürfen keine X-, Y-, Z-, A-, B-, C-. oder J-" "Wörter enthalten" #: src/emc/rs274ngc/interp_convert.cc:3385 #: src/emc/rs274ngc/interp_convert.cc:3742 #, fuzzy msgid "" "Cannot change the active coordinate system with cutter radius compensation on" msgstr "" "Koordinatensystem kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt " "werden" #: src/emc/rs274ngc/interp_convert.cc:3393 #: src/emc/rs274ngc/interp_convert.cc:3750 msgid "R not allowed in G10 L20" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:3966 #: src/emc/rs274ngc/interp_convert.cc:4323 #, fuzzy msgid "Spindle not turning in G33" msgstr "G86, aber Werkzeug-Spindel nicht in Rotation" #: src/emc/rs274ngc/interp_convert.cc:3976 #: src/emc/rs274ngc/interp_convert.cc:4333 #, fuzzy msgid "Spindle not turning in G33.1" msgstr "G86, aber Werkzeug-Spindel nicht in Rotation" #: src/emc/rs274ngc/interp_convert.cc:4019 #: src/emc/rs274ngc/interp_convert.cc:4376 msgid "BUG: An axis incorrectly moved along with an indexer" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:4032 #: src/emc/rs274ngc/interp_convert.cc:4389 msgid "BUG: trying to index incorrect axis" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:4124 #: src/emc/rs274ngc/interp_convert.cc:4481 emc/rs274ngc/interp_convert.cc:3745 #, fuzzy msgid "Cannot use G76 threading cycle with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:4127 #: src/emc/rs274ngc/interp_convert.cc:4484 msgid "In G76, I must not be 0" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:4129 #: src/emc/rs274ngc/interp_convert.cc:4486 #, fuzzy msgid "In G76, J must be greater than 0" msgstr "Zeilennummer größer als 99999" #: src/emc/rs274ngc/interp_convert.cc:4131 #: src/emc/rs274ngc/interp_convert.cc:4488 #, fuzzy msgid "In G76, K must be greater than J" msgstr "Zeilennummer größer als 99999" #: src/emc/rs274ngc/interp_convert.cc:4274 #: src/emc/rs274ngc/interp_convert.cc:4631 msgid "" "Length of cutter compensation entry move is not greater than the tool radius" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:4493 #: src/emc/rs274ngc/interp_convert.cc:4850 emc/rs274ngc/interp_convert.cc:4107 msgid "Zero degree inside corner is invalid for cutter compensation" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:4531 #: src/emc/rs274ngc/interp_convert.cc:4539 #: src/emc/rs274ngc/interp_convert.cc:4888 #: src/emc/rs274ngc/interp_convert.cc:4896 emc/rs274ngc/interp_convert.cc:4145 #: emc/rs274ngc/interp_convert.cc:4153 msgid "" "Arc to straight motion makes a corner the compensated tool can't fit in " "without gouging" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:4623 #: src/emc/rs274ngc/interp_convert.cc:4980 emc/rs274ngc/interp_convert.cc:4237 #, fuzzy msgid "Cannot change tools with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_convert.cc:4743 #: src/emc/rs274ngc/interp_convert.cc:5101 emc/rs274ngc/interp_convert.cc:4346 #, fuzzy msgid "Cannot change tool offset with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_queue.cc:539 src/emc/rs274ngc/interp_queue.cc:590 #: emc/rs274ngc/interp_queue.cc:512 #, c-format msgid "" "BUG: cutter compensation has generated an invalid arc with mismatched radii " "r1 %f r2 %f\n" msgstr "" #: src/emc/rs274ngc/interp_queue.cc:561 src/emc/rs274ngc/interp_queue.cc:612 #: emc/rs274ngc/interp_queue.cc:534 msgid "BUG: Unsupported plane in cutter compensation" msgstr "Nicht untersützte Ebene in Werkzeugradiuskorrektur" #: src/emc/rs274ngc/interp_queue.cc:571 src/emc/rs274ngc/interp_queue.cc:622 #: emc/rs274ngc/interp_queue.cc:544 msgid "" "Straight traverse in concave corner cannot be reached by the tool without " "gouging" msgstr "" #: src/emc/rs274ngc/interp_queue.cc:599 src/emc/rs274ngc/interp_queue.cc:650 #: emc/rs274ngc/interp_queue.cc:572 #, fuzzy, c-format msgid "BUG: Unsupported plane [%d] in cutter compensation" msgstr "Nicht untersützte Ebene in Werkzeugradiuskorrektur" #: src/emc/rs274ngc/interp_queue.cc:610 src/emc/rs274ngc/interp_queue.cc:661 #: emc/rs274ngc/interp_queue.cc:583 msgid "" "Straight feed in concave corner cannot be reached by the tool without gouging" msgstr "" #: src/emc/rs274ngc/interp_cycles.cc:628 #, fuzzy msgid "Cannot feed with zero feed rate" msgstr "" "G1 kann nicht mit einer Vorschubgeschwindigkeit von 0 ausgeführt werden" # Anmerkung:FJ: Who the fuck is "inverse time feed mode"? :-))) # Angabe des Weges, der in einer Minuten zurückgelegt werden soll??? # Anmerkung Thomas: Wird benutzt beim Fünfachsfräsen (3 Linearachsen und 2 Rundachsen zusammen). # F100 -> 60/100 = Weg im Raum wird in 0,6s zurückgelegt. Einige CAM Systeme erzeugen solchen Code... # Anmerkung:FJ: DIN66025 nennt das "Zeitreziproke Vorschubverschlüsselung". Was es nicht alles gibt :-) !!!!! #: src/emc/rs274ngc/interp_cycles.cc:629 #, fuzzy msgid "Cannot use inverse time feed with canned cycles" msgstr "Abtast-Fahrten sind im zeitreziproken Vorschub-Modus nicht möglich" #: src/emc/rs274ngc/interp_cycles.cc:630 #, fuzzy msgid "Cannot use canned cycles with cutter compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_cycles.cc:818 msgid "G17 canned cycle is not possible on a machine without Z axis" msgstr "" #: src/emc/rs274ngc/interp_cycles.cc:1001 #: src/emc/rs274ngc/interp_cycles.cc:1004 msgid "G17.1 canned cycle is not possible on a machine without W axis" msgstr "" #: src/emc/rs274ngc/interp_cycles.cc:1217 #: src/emc/rs274ngc/interp_cycles.cc:1220 msgid "G19 canned cycle is not possible on a machine without X axis" msgstr "" #: src/emc/rs274ngc/interp_cycles.cc:1385 #: src/emc/rs274ngc/interp_cycles.cc:1388 msgid "G19.1 canned cycle is not possible on a machine without U axis" msgstr "" #: src/emc/rs274ngc/interp_cycles.cc:1610 #: src/emc/rs274ngc/interp_cycles.cc:1613 msgid "G18 canned cycle is not possible on a machine without Y axis" msgstr "" #: src/emc/rs274ngc/interp_cycles.cc:1777 #: src/emc/rs274ngc/interp_cycles.cc:1780 msgid "G18.1 canned cycle is not possible on a machine without V axis" msgstr "" #: src/emc/rs274ngc/interp_find.cc:170 #, fuzzy msgid "Cannot use polar coordinates with G53" msgstr "Rotations-Achse kann nicht mit G76 bewegt werden" #: src/emc/rs274ngc/interp_find.cc:266 src/emc/rs274ngc/interp_find.cc:271 #: src/emc/rs274ngc/interp_find.cc:278 src/emc/rs274ngc/interp_find.cc:337 #: src/emc/rs274ngc/interp_find.cc:347 msgid "Cannot specify X or Y words with polar coordinate" msgstr "" #: src/emc/rs274ngc/interp_find.cc:272 msgid "Must specify angle in polar coordinate if at the origin" msgstr "" #: src/emc/rs274ngc/interp_find.cc:338 msgid "" "Incremental motion with polar coordinates is indeterminate when at the origin" msgstr "" #: src/emc/rs274ngc/interp_find.cc:348 msgid "G91 motion with polar coordinates is indeterminate when at the origin" msgstr "" #: src/emc/rs274ngc/interp_find.cc:720 #, c-format msgid "Requested tool %d not found in the tool table" msgstr "" #: src/emc/rs274ngc/interp_internal.cc:151 #: src/emc/rs274ngc/interp_internal.cc:154 msgid "Cannot use polar coordinate on a machine lacking X or Y axes" msgstr "" #: src/emc/rs274ngc/interp_internal.cc:152 #: src/emc/rs274ngc/interp_internal.cc:155 msgid "Cannot use polar coordinate except in G17 plane" msgstr "" #: src/emc/rs274ngc/interp_internal.cc:153 #: src/emc/rs274ngc/interp_internal.cc:156 msgid "Cannot specify both polar coordinate and X word" msgstr "" #: src/emc/rs274ngc/interp_internal.cc:154 #: src/emc/rs274ngc/interp_internal.cc:157 msgid "Cannot specify both polar coordinate and Y word" msgstr "" #: src/emc/rs274ngc/interp_internal.cc:175 #: src/emc/rs274ngc/interp_internal.cc:187 #: src/emc/rs274ngc/interp_internal.cc:200 #: src/emc/rs274ngc/interp_internal.cc:178 #: src/emc/rs274ngc/interp_internal.cc:190 #: src/emc/rs274ngc/interp_internal.cc:203 msgid "Polar coordinates can only be used for motion" msgstr "" #: src/emc/rs274ngc/interp_read.cc:1112 src/emc/rs274ngc/interp_read.cc:1116 #: src/emc/rs274ngc/interp_read.cc:1143 src/emc/rs274ngc/interp_read.cc:1147 #: emc/rs274ngc/interp_read.cc:1097 emc/rs274ngc/interp_read.cc:1101 #, c-format msgid "Bad character '\\%03o' used" msgstr "Ungültiges Zeichen »\\%03o« benutzt" #: src/emc/rs274ngc/interp_read.cc:1116 src/emc/rs274ngc/interp_read.cc:1147 #: emc/rs274ngc/interp_read.cc:1101 #, c-format msgid "Bad character '%c' used" msgstr "Ungültiges Zeichen »%c« benutzt" # Anmerkung:FJ: Schrägstrich, atan? Klären? Division wie bei c-Funktion atan2(x,y) ??? #: src/emc/rs274ngc/interp_read.cc:1623 src/emc/rs274ngc/interp_read.cc:1671 #, fuzzy msgid "Left bracket missing after 'while'" msgstr "Fehlende linke Klammer nach Schrägstrich bei atan" #: src/emc/rs274ngc/interp_read.cc:1638 src/emc/rs274ngc/interp_read.cc:1686 #, fuzzy msgid "Left bracket missing after 'repeat'" msgstr "Fehlende linke Klammer nach unärem Befehlssnamen" # Anmerkung:FJ: Schrägstrich, atan? Klären? Division wie bei c-Funktion atan2(x,y) ??? #: src/emc/rs274ngc/interp_read.cc:1653 src/emc/rs274ngc/interp_read.cc:1701 #, fuzzy msgid "Left bracket missing after 'if'" msgstr "Fehlende linke Klammer nach Schrägstrich bei atan" # Anmerkung:FJ: Schrägstrich, atan? Klären? Division wie bei c-Funktion atan2(x,y) ??? #: src/emc/rs274ngc/interp_read.cc:1668 src/emc/rs274ngc/interp_read.cc:1716 #, fuzzy msgid "Left bracket missing after 'elseif'" msgstr "Fehlende linke Klammer nach Schrägstrich bei atan" #: src/emc/rs274ngc/interp_read.cc:1858 #, c-format msgid "Cannot change #<%s>" msgstr "" #: src/emc/rs274ngc/interp_read.cc:1889 src/emc/rs274ngc/interp_read.cc:1932 #: src/emc/rs274ngc/interp_namedparams.cc:370 emc/rs274ngc/interp_read.cc:1865 #, c-format msgid "Internal error: Could not assign #<%s>" msgstr "" #: src/emc/rs274ngc/interp_read.cc:1906 #, c-format msgid "init_named_parameter must be global #<%s>" msgstr "" #: src/emc/rs274ngc/interp_read.cc:2093 #: src/emc/rs274ngc/interp_namedparams.cc:161 emc/rs274ngc/interp_read.cc:2021 #, c-format msgid "Named parameter #<%s> not defined" msgstr "" #: src/emc/rs274ngc/interp_read.cc:2174 src/emc/rs274ngc/interp_read.cc:1919 #, fuzzy msgid "Cannot read current position with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/interp_read.cc:2189 src/emc/rs274ngc/interp_read.cc:1934 #, fuzzy msgid "Expected # reading parameter" msgstr "Parameters aufklappen" #: src/emc/rs274ngc/interp_read.cc:2191 src/emc/rs274ngc/interp_read.cc:1936 msgid "Expected ] reading bracketed parameter" msgstr "" #: src/emc/rs274ngc/interp_read.cc:2881 src/emc/rs274ngc/interp_read.cc:2608 #, c-format msgid "bad number format (conversion failed) parsing '%s'" msgstr "" #: src/emc/rs274ngc/interp_read.cc:2882 src/emc/rs274ngc/interp_read.cc:2609 #, c-format msgid "bad number format (trailing characters) parsing '%s'" msgstr "" #: src/emc/rs274ngc/interp_read.cc:2972 src/emc/rs274ngc/interp_read.cc:2699 msgid "Calculation resulted in 'not a number'" msgstr "" #: src/emc/rs274ngc/interp_read.cc:2974 src/emc/rs274ngc/interp_read.cc:2701 msgid "Calculation resulted in 'infinity'" msgstr "" #: src/emc/rs274ngc/interp_read.cc:3268 src/emc/rs274ngc/interp_read.cc:2994 #, c-format msgid "EOF in file:%s seeking o-word: o<%s> from line: %d" msgstr "" #: src/emc/rs274ngc/interp_read.cc:3391 src/emc/rs274ngc/interp_read.cc:3106 #: emc/rs274ngc/interp_read.cc:3264 msgid "Multiple U words on one line" msgstr "Mehrere U-Wörter in einem Satz" #: src/emc/rs274ngc/interp_read.cc:3407 src/emc/rs274ngc/interp_read.cc:3122 #: emc/rs274ngc/interp_read.cc:3280 msgid "Multiple V words on one line" msgstr "Mehrere V-Wörter in einem Satz" #: src/emc/rs274ngc/interp_read.cc:3423 src/emc/rs274ngc/interp_read.cc:3138 #: emc/rs274ngc/interp_read.cc:3296 msgid "Multiple W words on one line" msgstr "Mehrere W-Wörter in einem Satz" #: src/emc/rs274ngc/interp_o_word.cc:104 src/emc/rs274ngc/interp_o_word.cc:95 #, c-format msgid "File:%s line:%d redefining sub: o|%s| already defined in file:%s" msgstr "" #: src/emc/rs274ngc/rs274ngc_pre.cc:897 src/emc/rs274ngc/rs274ngc_pre.cc:1269 #: src/emc/rs274ngc/rs274ngc_pre.cc:1344 emc/rs274ngc/rs274ngc_pre.cc:770 msgid "Queue is not empty after tool change" msgstr "Warteschlange ist nach Werkzeugwechsel nicht leer" #: src/emc/rs274ngc/rs274ngc_pre.cc:1145 src/emc/rs274ngc/rs274ngc_pre.cc:1648 #, fuzzy, c-format msgid "Unable to open parameter file: '%s'" msgstr "Datei kann nicht geöffnet werden" #: src/emc/rs274ngc/rs274ngc_return.hh:4 emc/rs274ngc/rs274ngc_return.hh:4 msgid "A file is already open" msgstr "Datei ist bereits geöffnet" #: src/emc/rs274ngc/rs274ngc_return.hh:5 emc/rs274ngc/rs274ngc_return.hh:5 msgid "All axes missing with g92" msgstr "Keine Weginformation für G92 angegeben" #: src/emc/rs274ngc/rs274ngc_return.hh:6 emc/rs274ngc/rs274ngc_return.hh:6 msgid "All axes missing with motion code" msgstr "Keine Koordinaten für Wegbedingung angegeben" #: src/emc/rs274ngc/rs274ngc_return.hh:7 emc/rs274ngc/rs274ngc_return.hh:7 msgid "Arc radius too small to reach end point" msgstr "Kreisradius zu klein zum Erreichen des Endpunktes" #: src/emc/rs274ngc/rs274ngc_return.hh:8 emc/rs274ngc/rs274ngc_return.hh:8 msgid "Argument to acos out of range" msgstr "Argument von acos außerhalb des gültigen Bereiches" #: src/emc/rs274ngc/rs274ngc_return.hh:9 emc/rs274ngc/rs274ngc_return.hh:9 msgid "Argument to asin out of range" msgstr "Argument von asin außerhalb des gültigen Bereiches" #: src/emc/rs274ngc/rs274ngc_return.hh:10 emc/rs274ngc/rs274ngc_return.hh:10 msgid "Attempt to divide by zero" msgstr "Division durch Null" #: src/emc/rs274ngc/rs274ngc_return.hh:11 emc/rs274ngc/rs274ngc_return.hh:11 msgid "Attempt to raise negative to non integer power" msgstr "" "Negative Zahl kann nicht mit einem nicht ganzzahligem Wert potenziert werden" #: src/emc/rs274ngc/rs274ngc_return.hh:12 emc/rs274ngc/rs274ngc_return.hh:13 msgid "Bad format unsigned integer" msgstr "Falsches Format bei positiver Ganzzahl" #: src/emc/rs274ngc/rs274ngc_return.hh:13 emc/rs274ngc/rs274ngc_return.hh:14 msgid "Bad number format" msgstr "Falsches Zahlenformat" #: src/emc/rs274ngc/rs274ngc_return.hh:14 emc/rs274ngc/rs274ngc_return.hh:15 msgid "Bug bad g code modal group 0" msgstr "Falsches G-Wort in Modal-Gruppe 0" #: src/emc/rs274ngc/rs274ngc_return.hh:15 emc/rs274ngc/rs274ngc_return.hh:16 msgid "Bug code not g0 or g1" msgstr "Wort ist nicht G0 oder G1" #: src/emc/rs274ngc/rs274ngc_return.hh:16 emc/rs274ngc/rs274ngc_return.hh:17 msgid "Bug code not g17 g18 or g19" msgstr "Wort ist nicht G17, G18 oder G19" #: src/emc/rs274ngc/rs274ngc_return.hh:17 emc/rs274ngc/rs274ngc_return.hh:18 msgid "Bug code not g20 or g21" msgstr "Wort ist nicht G20 oder G21" #: src/emc/rs274ngc/rs274ngc_return.hh:18 emc/rs274ngc/rs274ngc_return.hh:19 msgid "Bug code not g28 or g30" msgstr "Wort ist nicht G28 oder G30" #: src/emc/rs274ngc/rs274ngc_return.hh:19 emc/rs274ngc/rs274ngc_return.hh:20 msgid "Bug code not g2 or g3" msgstr "Wort ist nicht G2 oder G3" #: src/emc/rs274ngc/rs274ngc_return.hh:20 emc/rs274ngc/rs274ngc_return.hh:23 msgid "Bug code not g4 g10 g28 g30 g53 or g92 series" msgstr "Wort ist nicht G4, G10, G28, G30, G53 oder aus G92-Serie" #: src/emc/rs274ngc/rs274ngc_return.hh:21 emc/rs274ngc/rs274ngc_return.hh:24 msgid "Bug code not g61 g61.1 or g64" msgstr "Wort ist nicht G61, G61.1 oder G64" #: src/emc/rs274ngc/rs274ngc_return.hh:22 emc/rs274ngc/rs274ngc_return.hh:25 msgid "Bug code not g90 or g91" msgstr "Wort ist nicht G90 oder G91" #: src/emc/rs274ngc/rs274ngc_return.hh:23 emc/rs274ngc/rs274ngc_return.hh:27 msgid "Bug code not g98 or g99" msgstr "Wort ist nicht G98 oder G99" #: src/emc/rs274ngc/rs274ngc_return.hh:24 emc/rs274ngc/rs274ngc_return.hh:28 msgid "Bug code not in g92 series" msgstr "Wort ist nicht aus G92-Serie" # Anmerkung:FJ: g593 ???? WM: wahrscheinlich g59.3 #: src/emc/rs274ngc/rs274ngc_return.hh:25 emc/rs274ngc/rs274ngc_return.hh:29 msgid "Bug code not in range g54 to g593" msgstr "Wort ist nicht im Bereich G54 bis G59.3" #: src/emc/rs274ngc/rs274ngc_return.hh:26 emc/rs274ngc/rs274ngc_return.hh:30 msgid "Bug code not m0 m1 m2 m30 m60" msgstr "Wort ist nicht M0, M1, M2, M30 oder M60" # Anmerkung:FJ: distance mode? -> incremental oder absolut? Oder was ist hier gemeint!? # Anmerkung:FJ: Kettenmaß oder Absolutmaß -->> Bemaßungs-Modus, Maßmodus ... # Vielleicht doch mal DIN66025 aus der Uni-Bib besorgen!? # WM: wie wärs denn damit? -> Koordinaten Interpretationsmodus # Anmerkung:FJ: DIN66025 spricht bei g90/g91 von absoluter/inkrementaler Maßangabe # Was ausser abs. oder inkr. gibt es dort noch, daß diese Fehlermeldung # benötigt wird :-))) # msgstr "Koordinaten Interpretationsmodus nicht g90 oder g91" #: src/emc/rs274ngc/rs274ngc_return.hh:27 emc/rs274ngc/rs274ngc_return.hh:31 msgid "Bug distance mode not g90 or g91" msgstr "Maßangabe-Modus ist nicht G90 oder G91" #: src/emc/rs274ngc/rs274ngc_return.hh:28 emc/rs274ngc/rs274ngc_return.hh:32 msgid "Bug function should not have been called" msgstr "Funktion sollte besser nicht aufgerufen werden" # Anmerkung:FJ: Werkzeugradius-Kompensation in DIN66025: Werkzeugbahnkorrektur! #: src/emc/rs274ngc/rs274ngc_return.hh:29 emc/rs274ngc/rs274ngc_return.hh:33 msgid "Bug in tool radius comp" msgstr "Fehler bei Werkzeugbahnkorrektur" #: src/emc/rs274ngc/rs274ngc_return.hh:30 emc/rs274ngc/rs274ngc_return.hh:34 msgid "Bug plane not xy yz or xz" msgstr "Fläche nicht in XY-, YZ- oder XZ-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:31 emc/rs274ngc/rs274ngc_return.hh:35 msgid "Bug side not right or left" msgstr "Seite nicht rechts oder links" # Anmerkung:FJ: Verfahrkommando laut DIN66025: Wegbedingung #: src/emc/rs274ngc/rs274ngc_return.hh:32 emc/rs274ngc/rs274ngc_return.hh:36 msgid "Bug unknown motion code" msgstr "Unbekannte Wegbedingung" #: src/emc/rs274ngc/rs274ngc_return.hh:33 emc/rs274ngc/rs274ngc_return.hh:37 msgid "Bug unknown operation" msgstr "Unbekannter Befehl" #: src/emc/rs274ngc/rs274ngc_return.hh:34 emc/rs274ngc/rs274ngc_return.hh:38 msgid "Cannot change axis offsets with cutter radius comp" msgstr "" "Der Offset einer Achse kann nicht geändert werden, wenn " "Werkzeugbahnkorrektur aktiv ist" #: src/emc/rs274ngc/rs274ngc_return.hh:35 emc/rs274ngc/rs274ngc_return.hh:40 msgid "Cannot create backup file" msgstr "Backup Datei kann nicht erzeugt werden." #: src/emc/rs274ngc/rs274ngc_return.hh:36 emc/rs274ngc/rs274ngc_return.hh:41 msgid "Cannot do g1 with zero feed rate" msgstr "" "G1 kann nicht mit einer Vorschubgeschwindigkeit von 0 ausgeführt werden" #: src/emc/rs274ngc/rs274ngc_return.hh:37 emc/rs274ngc/rs274ngc_return.hh:42 msgid "Cannot do zero repeats of cycle" msgstr "Null Wiederholungen eines Arbeitszyklus" #: src/emc/rs274ngc/rs274ngc_return.hh:38 emc/rs274ngc/rs274ngc_return.hh:43 msgid "Cannot make arc with zero feed rate" msgstr "" "Ein Kreisbogen mit einer Vorschubgeschwindigkeit von 0 ist nicht möglich" #: src/emc/rs274ngc/rs274ngc_return.hh:39 emc/rs274ngc/rs274ngc_return.hh:45 msgid "Cannot open backup file" msgstr "Backup-Datei kann nicht geöffnet werden" #: src/emc/rs274ngc/rs274ngc_return.hh:40 emc/rs274ngc/rs274ngc_return.hh:46 msgid "Cannot open variable file" msgstr "Variablen-Datei kann nicht geöffnet werden" #: src/emc/rs274ngc/rs274ngc_return.hh:41 emc/rs274ngc/rs274ngc_return.hh:48 msgid "Cannot probe with cutter radius comp on" msgstr "Abtast-Fahrt bei aktiver Werkzeugbahnkorrektur nicht möglich" #: src/emc/rs274ngc/rs274ngc_return.hh:42 emc/rs274ngc/rs274ngc_return.hh:49 msgid "Cannot probe with zero feed rate" msgstr "Abtast-Fahrt mit einer Verfahrgeschwindigkeit von 0 nicht möglich" #: src/emc/rs274ngc/rs274ngc_return.hh:43 emc/rs274ngc/rs274ngc_return.hh:50 msgid "Cannot put a b in canned cycle" msgstr "" "Angabe der Koordinaten-Wörter A und B in Arbeitszyklen ist nicht erlaubt" #: src/emc/rs274ngc/rs274ngc_return.hh:44 emc/rs274ngc/rs274ngc_return.hh:51 msgid "Cannot put a c in canned cycle" msgstr "" "Angabe der Koordinaten-Wörter A und C in Arbeitszyklen ist nicht erlaubt" #: src/emc/rs274ngc/rs274ngc_return.hh:45 emc/rs274ngc/rs274ngc_return.hh:52 msgid "Cannot put an a in canned cycle" msgstr "Angabe des Koordinaten-Wörters A in Arbeitszyklen ist nicht erlaubt" #: src/emc/rs274ngc/rs274ngc_return.hh:46 emc/rs274ngc/rs274ngc_return.hh:54 msgid "Cannot turn cutter radius comp on when on" msgstr "Werkzeugbahnkorrektur kann nicht aktiviert werden wenn schon aktiv" #: src/emc/rs274ngc/rs274ngc_return.hh:47 emc/rs274ngc/rs274ngc_return.hh:56 msgid "Cannot use axis values with g80" msgstr "Keine Koordinaten-Angabe zusammen mit G80 möglich" #: src/emc/rs274ngc/rs274ngc_return.hh:48 emc/rs274ngc/rs274ngc_return.hh:57 msgid "Cannot use axis values without a g code that uses them" msgstr "" "Koordinaten-Angaben können nur zusammen mit einer passenden Wegbedingung " "verwendet werden" #: src/emc/rs274ngc/rs274ngc_return.hh:49 emc/rs274ngc/rs274ngc_return.hh:60 msgid "Cannot use g28 or g30 with cutter radius comp" msgstr "" "G28 oder G30 kann nicht mit aktiver Werkzeugbahnkorrektur verwendet werden" #: src/emc/rs274ngc/rs274ngc_return.hh:50 emc/rs274ngc/rs274ngc_return.hh:61 msgid "Cannot use g53 incremental" msgstr "G53 kann nicht im inkrementalen Maßangabe-Modus benutzt werden" #: src/emc/rs274ngc/rs274ngc_return.hh:51 emc/rs274ngc/rs274ngc_return.hh:62 msgid "Cannot use g53 with cutter radius comp" msgstr "G53 kann nicht mit aktiver Werkzeugbahnkorrektur verwendet werden" #: src/emc/rs274ngc/rs274ngc_return.hh:52 emc/rs274ngc/rs274ngc_return.hh:63 msgid "Cannot use two g codes that both use axis values" msgstr "" "Es darf maximal eine Wegbedingung mit einer Koordinaten-Angabe pro Satz " "verwendet werden" #: src/emc/rs274ngc/rs274ngc_return.hh:53 emc/rs274ngc/rs274ngc_return.hh:66 msgid "Command too long" msgstr "Befehl zu lang" #: src/emc/rs274ngc/rs274ngc_return.hh:54 emc/rs274ngc/rs274ngc_return.hh:69 msgid "Current point same as end point of arc" msgstr "" "Aktueller Koordinaten-Punkt ist identisch mit dem Endpunkt des Kreisbogens" #: src/emc/rs274ngc/rs274ngc_return.hh:55 emc/rs274ngc/rs274ngc_return.hh:72 msgid "Dwell time missing with g4" msgstr "Verweilzeit-Angabe fehlt bei G4" #: src/emc/rs274ngc/rs274ngc_return.hh:56 emc/rs274ngc/rs274ngc_return.hh:73 msgid "Dwell time p word missing with g82" msgstr "Verweilzeit-Angabe durch P-Wort fehlt bei G82" #: src/emc/rs274ngc/rs274ngc_return.hh:57 emc/rs274ngc/rs274ngc_return.hh:74 msgid "Dwell time p word missing with g86" msgstr "Verweilzeit-Angabe durch P-Wort fehlt bei G86" #: src/emc/rs274ngc/rs274ngc_return.hh:58 emc/rs274ngc/rs274ngc_return.hh:75 msgid "Dwell time p word missing with g88" msgstr "Verweilzeit-Angabe durch P-Wort fehlt bei G88" #: src/emc/rs274ngc/rs274ngc_return.hh:59 emc/rs274ngc/rs274ngc_return.hh:76 msgid "Dwell time p word missing with g89" msgstr "Verweilzeit-Angabe durch P-Wort fehlt bei G89" #: src/emc/rs274ngc/rs274ngc_return.hh:60 emc/rs274ngc/rs274ngc_return.hh:77 msgid "Equal sign missing in parameter setting" msgstr "Gleichheitszeichen beim Setzen eines Parameters fehlt" #: src/emc/rs274ngc/rs274ngc_return.hh:61 emc/rs274ngc/rs274ngc_return.hh:78 msgid "F word missing with inverse time arc move" msgstr "" "Angabe eines F-Wörters zum Fahren eines Kreisbogens im zeitreziproken " "Vorschub-Modus fehlt" #: src/emc/rs274ngc/rs274ngc_return.hh:62 emc/rs274ngc/rs274ngc_return.hh:79 msgid "F word missing with inverse time g1 move" msgstr "" "Angabe eines F-Wörters zum Verfahren mit G1 im zeitreziproken Vorschub-Modus " "fehlt" #: src/emc/rs274ngc/rs274ngc_return.hh:63 emc/rs274ngc/rs274ngc_return.hh:80 msgid "File ended with no percent sign" msgstr "Es fehlt ein Prozent-Zeichen am Ende der Datei" #: src/emc/rs274ngc/rs274ngc_return.hh:64 emc/rs274ngc/rs274ngc_return.hh:81 msgid "File ended with no percent sign or program end" msgstr "" "Es fehlt ein Prozent-Zeichen oder ein Programm-Ende-Wort am Ende der Datei" #: src/emc/rs274ngc/rs274ngc_return.hh:65 emc/rs274ngc/rs274ngc_return.hh:82 msgid "File name too long" msgstr "Dateiname zu lang" #: src/emc/rs274ngc/rs274ngc_return.hh:66 emc/rs274ngc/rs274ngc_return.hh:83 msgid "G code out of range" msgstr "G-Wort außerhalb des erlaubten Bereiches" #: src/emc/rs274ngc/rs274ngc_return.hh:67 emc/rs274ngc/rs274ngc_return.hh:85 msgid "I word given for arc in yz plane" msgstr "Angabe eines I-Wörters für einen Kreisbogen in der YZ-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:68 emc/rs274ngc/rs274ngc_return.hh:86 msgid "I word missing with g87" msgstr "I-Wort fehlt bei G87" #: src/emc/rs274ngc/rs274ngc_return.hh:69 emc/rs274ngc/rs274ngc_return.hh:88 msgid "J word given for arc in xz plane" msgstr "Angabe eines J-Wörters für einen Kreisbogen in der XZ-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:70 emc/rs274ngc/rs274ngc_return.hh:89 msgid "J word missing with g87" msgstr "Es fehlt ein J-Wort für G87" #: src/emc/rs274ngc/rs274ngc_return.hh:71 emc/rs274ngc/rs274ngc_return.hh:91 msgid "K word given for arc in xy plane" msgstr "Angabe eines K-Wörters für einen Kreisbogen in der XY-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:72 emc/rs274ngc/rs274ngc_return.hh:92 msgid "K word missing with g87" msgstr "Es fehlt ein J-Wort für G87" # Anmerkung:FJ: Schrägstrich, atan? Klären? Division wie bei c-Funktion atan2(x,y) ??? #: src/emc/rs274ngc/rs274ngc_return.hh:73 emc/rs274ngc/rs274ngc_return.hh:95 msgid "Left bracket missing after slash with atan" msgstr "Fehlende linke Klammer nach Schrägstrich bei atan" #: src/emc/rs274ngc/rs274ngc_return.hh:74 emc/rs274ngc/rs274ngc_return.hh:96 msgid "Left bracket missing after unary operation name" msgstr "Fehlende linke Klammer nach unärem Befehlssnamen" #: src/emc/rs274ngc/rs274ngc_return.hh:75 emc/rs274ngc/rs274ngc_return.hh:99 msgid "M code greater than 199" msgstr "M-Wort größer als 199" #: src/emc/rs274ngc/rs274ngc_return.hh:76 emc/rs274ngc/rs274ngc_return.hh:100 msgid "Mixed radius ijk format for arc" msgstr "Radius- und IJK-Format durcheinandergewürfelt" #: src/emc/rs274ngc/rs274ngc_return.hh:77 emc/rs274ngc/rs274ngc_return.hh:101 msgid "Multiple a words on one line" msgstr "Mehrere A-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:78 emc/rs274ngc/rs274ngc_return.hh:102 msgid "Multiple b words on one line" msgstr "Mehrere B-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:79 emc/rs274ngc/rs274ngc_return.hh:103 msgid "Multiple c words on one line" msgstr "Mehrere C-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:80 emc/rs274ngc/rs274ngc_return.hh:104 msgid "Multiple d words on one line" msgstr "Mehrere D-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:81 emc/rs274ngc/rs274ngc_return.hh:105 msgid "Multiple f words on one line" msgstr "Mehrere F-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:82 emc/rs274ngc/rs274ngc_return.hh:106 msgid "Multiple h words on one line" msgstr "Mehrere H-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:83 emc/rs274ngc/rs274ngc_return.hh:107 msgid "Multiple i words on one line" msgstr "Mehrere I-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:84 emc/rs274ngc/rs274ngc_return.hh:108 msgid "Multiple j words on one line" msgstr "Mehrere J-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:85 emc/rs274ngc/rs274ngc_return.hh:109 msgid "Multiple k words on one line" msgstr "Mehrere K-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:86 emc/rs274ngc/rs274ngc_return.hh:110 msgid "Multiple l words on one line" msgstr "Mehrere L-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:87 emc/rs274ngc/rs274ngc_return.hh:111 msgid "Multiple p words on one line" msgstr "Mehrere P-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:88 emc/rs274ngc/rs274ngc_return.hh:112 msgid "Multiple q words on one line" msgstr "Mehrere Q-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:89 emc/rs274ngc/rs274ngc_return.hh:113 msgid "Multiple r words on one line" msgstr "Mehrere R-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:90 emc/rs274ngc/rs274ngc_return.hh:114 msgid "Multiple s words on one line" msgstr "Mehrere S-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:91 emc/rs274ngc/rs274ngc_return.hh:115 msgid "Multiple t words on one line" msgstr "Mehrere T-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:92 emc/rs274ngc/rs274ngc_return.hh:116 msgid "Multiple x words on one line" msgstr "Mehrere X-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:93 emc/rs274ngc/rs274ngc_return.hh:117 msgid "Multiple y words on one line" msgstr "Mehrere Y-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:94 emc/rs274ngc/rs274ngc_return.hh:118 msgid "Multiple z words on one line" msgstr "Mehrere Z-Wörter in einem Satz" #: src/emc/rs274ngc/rs274ngc_return.hh:95 emc/rs274ngc/rs274ngc_return.hh:119 msgid "Must use g0 or g1 with g53" msgstr "G53 muß immer zusammen mit G0 oder G1 benutzt werden" #: src/emc/rs274ngc/rs274ngc_return.hh:96 emc/rs274ngc/rs274ngc_return.hh:120 msgid "Negative argument to sqrt" msgstr "Wurzel (sqrt-Befehl) mit negativem Argument" #: src/emc/rs274ngc/rs274ngc_return.hh:97 emc/rs274ngc/rs274ngc_return.hh:121 msgid "Negative d word tool radius index used" msgstr "" "Negative Zahl bei bei D-Wort (Werkzeug-Radius als Index in der Werkzeug-" "Tabelle)" #: src/emc/rs274ngc/rs274ngc_return.hh:98 emc/rs274ngc/rs274ngc_return.hh:122 msgid "Negative f word used" msgstr "F-Wort mit negativer Zahl" #: src/emc/rs274ngc/rs274ngc_return.hh:99 emc/rs274ngc/rs274ngc_return.hh:123 msgid "Negative g code used" msgstr "G-Wort mit negativer Zahl" #: src/emc/rs274ngc/rs274ngc_return.hh:100 emc/rs274ngc/rs274ngc_return.hh:124 msgid "Negative h word used" msgstr "H-Wort mit negativer Zahl" #: src/emc/rs274ngc/rs274ngc_return.hh:101 emc/rs274ngc/rs274ngc_return.hh:125 msgid "Negative l word used" msgstr "L-Wort mit negativer Zahl" #: src/emc/rs274ngc/rs274ngc_return.hh:102 emc/rs274ngc/rs274ngc_return.hh:126 msgid "Negative m code used" msgstr "M-Wort mit negativer Zahl" #: src/emc/rs274ngc/rs274ngc_return.hh:103 emc/rs274ngc/rs274ngc_return.hh:127 msgid "Negative or zero q value used" msgstr "Q-Wert kleiner oder gleich Null" #: src/emc/rs274ngc/rs274ngc_return.hh:104 emc/rs274ngc/rs274ngc_return.hh:128 msgid "Negative p word used" msgstr "P-Wort mit negativer Zahl" #: src/emc/rs274ngc/rs274ngc_return.hh:105 emc/rs274ngc/rs274ngc_return.hh:129 msgid "Negative spindle speed used" msgstr "Geschwindigkeit der Werkzeug-Spindel kleiner Null" #: src/emc/rs274ngc/rs274ngc_return.hh:106 emc/rs274ngc/rs274ngc_return.hh:130 msgid "Negative tool id used" msgstr "Negative Werkzeugnummer verwendet" #: src/emc/rs274ngc/rs274ngc_return.hh:107 emc/rs274ngc/rs274ngc_return.hh:131 msgid "Nested comment found" msgstr "Verschachtelter Kommentar entdeckt" #: src/emc/rs274ngc/rs274ngc_return.hh:108 emc/rs274ngc/rs274ngc_return.hh:132 msgid "No characters found in reading real value" msgstr "Reelle Zahl erwartet, aber keinerlei Zeichen gefunden" #: src/emc/rs274ngc/rs274ngc_return.hh:109 emc/rs274ngc/rs274ngc_return.hh:134 msgid "Non integer value for integer" msgstr "" "Angabe eines nicht-ganzzahligen Wertes, obwohl eine Ganzzahl erwartet wurde" #: src/emc/rs274ngc/rs274ngc_return.hh:110 emc/rs274ngc/rs274ngc_return.hh:135 msgid "Null missing after newline" msgstr "Fehlende Null nach Zeilenumbruch" #: src/emc/rs274ngc/rs274ngc_return.hh:111 emc/rs274ngc/rs274ngc_return.hh:140 msgid "Parameter file out of order" msgstr "Parameter-Datei nicht in Ordnung" #: src/emc/rs274ngc/rs274ngc_return.hh:112 emc/rs274ngc/rs274ngc_return.hh:141 msgid "Parameter number out of range" msgstr "Parameter-Nummer ausserhalb des gültigen Bereichs" #: src/emc/rs274ngc/rs274ngc_return.hh:113 #, fuzzy msgid "Parameter is readonly" msgstr "Parameterdatei" #: src/emc/rs274ngc/rs274ngc_return.hh:114 emc/rs274ngc/rs274ngc_return.hh:142 msgid "Q word missing with g83" msgstr "Q-Wort fehlt bei G83" #: src/emc/rs274ngc/rs274ngc_return.hh:115 emc/rs274ngc/rs274ngc_return.hh:144 msgid "Queue is not empty after probing" msgstr "Warteschlange ist nach Abtast-Fahrt nicht leer" #: src/emc/rs274ngc/rs274ngc_return.hh:116 emc/rs274ngc/rs274ngc_return.hh:145 msgid "R clearance plane unspecified in cycle" msgstr "Angabe einer R-Abstands-Ebene für den Zklyus fehlt" #: src/emc/rs274ngc/rs274ngc_return.hh:117 emc/rs274ngc/rs274ngc_return.hh:146 msgid "R i j k words all missing for arc" msgstr "Angabe von R, I, J oder K fehlt bei einem Kreisbogen" #: src/emc/rs274ngc/rs274ngc_return.hh:118 emc/rs274ngc/rs274ngc_return.hh:147 msgid "R less than x in cycle in yz plane" msgstr "R ist kleiner als X während eines Arbeitszyklus in der YZ-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:119 emc/rs274ngc/rs274ngc_return.hh:148 msgid "R less than y in cycle in xz plane" msgstr "R ist kleiner als Y während eines Arbeitszyklus in der XZ-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:120 emc/rs274ngc/rs274ngc_return.hh:149 msgid "R less than z in cycle in xy plane" msgstr "R ist kleiner als Z während eines Arbeitszyklus in der XY-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:121 emc/rs274ngc/rs274ngc_return.hh:150 msgid "R word with no g code that uses it" msgstr "Koordinaten-Wort R ohne zugehörige Wegbedingung (G)" #: src/emc/rs274ngc/rs274ngc_return.hh:122 emc/rs274ngc/rs274ngc_return.hh:155 msgid "Slash missing after first atan argument" msgstr "Fehlender Schrägstrich nach dem ersten Argument in einer atan-Funktion" #: src/emc/rs274ngc/rs274ngc_return.hh:123 emc/rs274ngc/rs274ngc_return.hh:156 msgid "Spindle not turning clockwise in g84" msgstr "G84, aber Werkzeug-Spindel dreht sich nicht im Uhrzeigersinn" #: src/emc/rs274ngc/rs274ngc_return.hh:124 emc/rs274ngc/rs274ngc_return.hh:157 msgid "Spindle not turning in g86" msgstr "G86, aber Werkzeug-Spindel nicht in Rotation" #: src/emc/rs274ngc/rs274ngc_return.hh:125 emc/rs274ngc/rs274ngc_return.hh:158 msgid "Spindle not turning in g87" msgstr "G87, aber Werkzeug-Spindel nicht in Rotation" #: src/emc/rs274ngc/rs274ngc_return.hh:126 emc/rs274ngc/rs274ngc_return.hh:159 msgid "Spindle not turning in g88" msgstr "G88, aber Werkzeug-Spindel nicht in Rotation" #: src/emc/rs274ngc/rs274ngc_return.hh:127 emc/rs274ngc/rs274ngc_return.hh:160 msgid "Sscanf failed" msgstr "Fehler in Funktion sscanf()" #: src/emc/rs274ngc/rs274ngc_return.hh:128 emc/rs274ngc/rs274ngc_return.hh:161 msgid "Start point too close to probe point" msgstr "Startpunkt zu dicht am Abtast-Punkt" #: src/emc/rs274ngc/rs274ngc_return.hh:129 emc/rs274ngc/rs274ngc_return.hh:162 msgid "Too many m codes on line" msgstr "Zu viele M-Wörter in einer Zeile" # Anmerkung:FJ: Tool max? Was das? # Anmerkung:AJ: sollte "Index in tool table file too large" sein #: src/emc/rs274ngc/rs274ngc_return.hh:130 #, fuzzy msgid "Pocket max too large" msgstr "Werkzeug-Datei-Index zu groß" #: src/emc/rs274ngc/rs274ngc_return.hh:131 emc/rs274ngc/rs274ngc_return.hh:166 msgid "Tool radius not less than arc radius with comp" msgstr "" "Werkzeug-Radius bei der Werkzeugbahnkorrektur ist größer als der " "Kreisbogenradius" #: src/emc/rs274ngc/rs274ngc_return.hh:132 emc/rs274ngc/rs274ngc_return.hh:167 msgid "Two g codes used from same modal group" msgstr "" "Benutzung von zwei G-Wörtern aus der selben modalen Gruppe in einer Zeile" #: src/emc/rs274ngc/rs274ngc_return.hh:133 emc/rs274ngc/rs274ngc_return.hh:168 msgid "Two m codes used from same modal group" msgstr "" "Benutzung von zwei M-Wörtern aus der selben modalen Gruppe in einer Zeile" #: src/emc/rs274ngc/rs274ngc_return.hh:134 #, fuzzy, c-format msgid "Unable to open file <%s>" msgstr "Datei kann nicht geöffnet werden" #: src/emc/rs274ngc/rs274ngc_return.hh:135 emc/rs274ngc/rs274ngc_return.hh:170 msgid "Unclosed comment found" msgstr "Nicht abgeschlossener Kommentar" #: src/emc/rs274ngc/rs274ngc_return.hh:136 emc/rs274ngc/rs274ngc_return.hh:171 msgid "Unclosed expression" msgstr "Nicht abgeschlossener Ausdruck" #: src/emc/rs274ngc/rs274ngc_return.hh:137 emc/rs274ngc/rs274ngc_return.hh:172 msgid "Unknown g code used" msgstr "Unbekanntes G-Wort" #: src/emc/rs274ngc/rs274ngc_return.hh:138 emc/rs274ngc/rs274ngc_return.hh:173 msgid "Unknown m code used" msgstr "Unbekanntes M-Wort" #: src/emc/rs274ngc/rs274ngc_return.hh:139 emc/rs274ngc/rs274ngc_return.hh:174 msgid "Unknown operation" msgstr "Unbekannter Befehl" #: src/emc/rs274ngc/rs274ngc_return.hh:140 emc/rs274ngc/rs274ngc_return.hh:175 msgid "Unknown operation name starting with a" msgstr "Unbekannter Befehl beginnend mit A" #: src/emc/rs274ngc/rs274ngc_return.hh:141 emc/rs274ngc/rs274ngc_return.hh:176 msgid "Unknown operation name starting with m" msgstr "Unbekannter Befehl beginnend mit M" #: src/emc/rs274ngc/rs274ngc_return.hh:142 emc/rs274ngc/rs274ngc_return.hh:177 msgid "Unknown operation name starting with o" msgstr "Unbekannter Befehl beginnend mit O" #: src/emc/rs274ngc/rs274ngc_return.hh:143 emc/rs274ngc/rs274ngc_return.hh:178 msgid "Unknown operation name starting with x" msgstr "Unbekannter Befehl beginnend mit X" #: src/emc/rs274ngc/rs274ngc_return.hh:144 emc/rs274ngc/rs274ngc_return.hh:179 msgid "Unknown word starting with a" msgstr "Unbekanntes Wort beginnend mit A" #: src/emc/rs274ngc/rs274ngc_return.hh:145 emc/rs274ngc/rs274ngc_return.hh:180 msgid "Unknown word starting with c" msgstr "Unbekanntes Wort beginnend mit C" #: src/emc/rs274ngc/rs274ngc_return.hh:146 emc/rs274ngc/rs274ngc_return.hh:181 msgid "Unknown word starting with e" msgstr "Unbekanntes Wort beginnend mit E" #: src/emc/rs274ngc/rs274ngc_return.hh:147 emc/rs274ngc/rs274ngc_return.hh:182 msgid "Unknown word starting with f" msgstr "Unbekanntes Wort beginnend mit F" #: src/emc/rs274ngc/rs274ngc_return.hh:148 emc/rs274ngc/rs274ngc_return.hh:183 msgid "Unknown word starting with l" msgstr "Unbekanntes Wort beginnend mit L" #: src/emc/rs274ngc/rs274ngc_return.hh:149 emc/rs274ngc/rs274ngc_return.hh:184 msgid "Unknown word starting with r" msgstr "Unbekanntes Wort beginnend mit R" #: src/emc/rs274ngc/rs274ngc_return.hh:150 emc/rs274ngc/rs274ngc_return.hh:185 msgid "Unknown word starting with s" msgstr "Unbekanntes Wort beginnend mit S" #: src/emc/rs274ngc/rs274ngc_return.hh:151 emc/rs274ngc/rs274ngc_return.hh:186 msgid "Unknown word starting with t" msgstr "Unbekanntes Wort beginnend mit T" #: src/emc/rs274ngc/rs274ngc_return.hh:152 emc/rs274ngc/rs274ngc_return.hh:187 msgid "Unknown word where unary operation could be" msgstr "Unbekanntes Wort, wo unärer Befehl erwartet" #: src/emc/rs274ngc/rs274ngc_return.hh:153 emc/rs274ngc/rs274ngc_return.hh:188 msgid "X and y words missing for arc in xy plane" msgstr "X- und Y-Wörter fehlen für Kreisbogen in der XY-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:154 emc/rs274ngc/rs274ngc_return.hh:189 msgid "X and z words missing for arc in xz plane" msgstr "X- und Z-Wörter fehlen für Kreisbogen in XZ-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:155 emc/rs274ngc/rs274ngc_return.hh:190 msgid "X value unspecified in yz plane canned cycle" msgstr "Keine Angabe eines X-Wertes bei Arbeitszyklus in XZ-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:156 emc/rs274ngc/rs274ngc_return.hh:192 msgid "Y and z words missing for arc in yz plane" msgstr "Y- und Z-Wort fehlt für Kreisbogen in YZ-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:157 emc/rs274ngc/rs274ngc_return.hh:193 msgid "Y value unspecified in xz plane canned cycle" msgstr "Keine Angabe eines Y-Wertes bei Arbeitszyklus in XZ-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:158 emc/rs274ngc/rs274ngc_return.hh:194 msgid "Z value unspecified in xy plane canned cycle" msgstr "Keine Angabe eines Z-Wertes bei Arbeitszyklus in XY-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:159 emc/rs274ngc/rs274ngc_return.hh:195 msgid "Zero or negative argument to ln" msgstr "Argument der ln-Funktion kleiner oder gleich Null" #: src/emc/rs274ngc/rs274ngc_return.hh:161 emc/rs274ngc/rs274ngc_return.hh:197 msgid "K word missing with g33/g33.1" msgstr "Es fehlt ein K-Wort für G33/G33.1" #: src/emc/rs274ngc/rs274ngc_return.hh:162 emc/rs274ngc/rs274ngc_return.hh:198 msgid "F word used with a g33/g33.1" msgstr "Benutzung eines F-Wörters mit G33/G33.1" #: src/emc/rs274ngc/rs274ngc_return.hh:163 emc/rs274ngc/rs274ngc_return.hh:201 msgid "Unknown operation name starting with e" msgstr "Unbekannter Befehl beginnend mit E" #: src/emc/rs274ngc/rs274ngc_return.hh:164 emc/rs274ngc/rs274ngc_return.hh:202 msgid "Unknown operation name starting with n" msgstr "Unbekannter Befehl beginnend mit N" #: src/emc/rs274ngc/rs274ngc_return.hh:165 emc/rs274ngc/rs274ngc_return.hh:203 msgid "Unknown operation name starting with g" msgstr "Unbekannter Befehl beginnend mit G" #: src/emc/rs274ngc/rs274ngc_return.hh:166 emc/rs274ngc/rs274ngc_return.hh:204 msgid "Unknown operation name starting with l" msgstr "Unbekannter Befehl beginnend mit L" #: src/emc/rs274ngc/rs274ngc_return.hh:167 emc/rs274ngc/rs274ngc_return.hh:205 msgid "Too many subroutine parameters" msgstr "Zu viele Parameter für die Unterfunktion" #: src/emc/rs274ngc/rs274ngc_return.hh:168 emc/rs274ngc/rs274ngc_return.hh:206 msgid "Too many subroutine levels" msgstr "Zu viele Ebenen für die Unterfunktion" #: src/emc/rs274ngc/rs274ngc_return.hh:169 #: src/emc/rs274ngc/rs274ngc_return.hh:170 emc/rs274ngc/rs274ngc_return.hh:207 msgid "Unknown control command in o word" msgstr "Unbekannter Befehl im O-Wort" #: src/emc/rs274ngc/rs274ngc_return.hh:170 #: src/emc/rs274ngc/rs274ngc_return.hh:171 emc/rs274ngc/rs274ngc_return.hh:208 msgid "Too many oword labels" msgstr "Zu viele O-Wort Bezeichner" #: src/emc/rs274ngc/rs274ngc_return.hh:171 #: src/emc/rs274ngc/rs274ngc_return.hh:172 emc/rs274ngc/rs274ngc_return.hh:209 msgid "Unknown oword number" msgstr "Unbekannte O-Wort-Nummer" #: src/emc/rs274ngc/rs274ngc_return.hh:172 #: src/emc/rs274ngc/rs274ngc_return.hh:173 emc/rs274ngc/rs274ngc_return.hh:210 msgid "Nested subroutine definition" msgstr "Verschachtelte Definition einer Unterfunktion" #: src/emc/rs274ngc/rs274ngc_return.hh:173 #: src/emc/rs274ngc/rs274ngc_return.hh:174 emc/rs274ngc/rs274ngc_return.hh:211 msgid "Not in subroutine definition" msgstr "" #: src/emc/rs274ngc/rs274ngc_return.hh:174 #: src/emc/rs274ngc/rs274ngc_return.hh:175 emc/rs274ngc/rs274ngc_return.hh:213 msgid "File not open" msgstr "Datei ist nicht geöffnet" #: src/emc/rs274ngc/rs274ngc_return.hh:175 #: src/emc/rs274ngc/rs274ngc_return.hh:176 emc/rs274ngc/rs274ngc_return.hh:214 msgid "Need tool prepared -Txx- for toolchange" msgstr "" #: src/emc/rs274ngc/rs274ngc_return.hh:176 #: src/emc/rs274ngc/rs274ngc_return.hh:177 emc/rs274ngc/rs274ngc_return.hh:215 msgid "Cannot change planes with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: src/emc/rs274ngc/rs274ngc_return.hh:177 #: src/emc/rs274ngc/rs274ngc_return.hh:178 emc/rs274ngc/rs274ngc_return.hh:216 msgid "Cutter radius compensation allowed only in XY, XZ planes" msgstr "Werkzeugradiuskorrektur ist nur in XY- und XZ-Ebenen erlaubt" #: src/emc/rs274ngc/rs274ngc_return.hh:178 #: src/emc/rs274ngc/rs274ngc_return.hh:179 emc/rs274ngc/rs274ngc_return.hh:217 msgid "P word missing with G76" msgstr "P-Wort fehlt bei G87" #: src/emc/rs274ngc/rs274ngc_return.hh:179 #: src/emc/rs274ngc/rs274ngc_return.hh:180 emc/rs274ngc/rs274ngc_return.hh:218 msgid "I J or K words missing with G76" msgstr "I-, J- oder K-Wort fehlt bei G76" #: src/emc/rs274ngc/rs274ngc_return.hh:180 #: src/emc/rs274ngc/rs274ngc_return.hh:181 emc/rs274ngc/rs274ngc_return.hh:219 msgid "Cannot move rotary axes with G76" msgstr "Rotations-Achse kann nicht mit G76 bewegt werden" #: src/emc/rs274ngc/rs274ngc_return.hh:181 #: src/emc/rs274ngc/rs274ngc_return.hh:182 emc/rs274ngc/rs274ngc_return.hh:220 msgid "Multiple e words on one line" msgstr "Mehrere E-Wörter in einer einzelnen Zeile" #: src/emc/rs274ngc/rs274ngc_return.hh:182 #: src/emc/rs274ngc/rs274ngc_return.hh:183 emc/rs274ngc/rs274ngc_return.hh:222 msgid "Named parameter not terminated" msgstr "" #: src/emc/rs274ngc/rs274ngc_return.hh:183 #: src/emc/rs274ngc/rs274ngc_return.hh:184 emc/rs274ngc/rs274ngc_return.hh:225 msgid "Out of memory" msgstr "Platz im Hauptspeicher reicht nicht aus" #: src/emc/rs274ngc/rs274ngc_return.hh:184 #: src/emc/rs274ngc/rs274ngc_return.hh:185 emc/rs274ngc/rs274ngc_return.hh:227 msgid "S word missing with G96" msgstr "S-Wort fehlt bei G96" #: src/emc/rs274ngc/rs274ngc_return.hh:185 #: src/emc/rs274ngc/rs274ngc_return.hh:186 emc/rs274ngc/rs274ngc_return.hh:228 msgid "Queue is not empty after external input" msgstr "Warteschlange ist nach externer Eingabe nicht leer" #: src/emc/rs274ngc/rs274ngc_return.hh:186 #: src/emc/rs274ngc/rs274ngc_return.hh:187 emc/rs274ngc/rs274ngc_return.hh:229 msgid "Can't select analog input with wait type != immediate return" msgstr "" #: src/emc/rs274ngc/rs274ngc_return.hh:187 #: src/emc/rs274ngc/rs274ngc_return.hh:188 emc/rs274ngc/rs274ngc_return.hh:230 msgid "Zero timeout with wait type != immediate return" msgstr "" #: src/emc/rs274ngc/rs274ngc_return.hh:188 #: src/emc/rs274ngc/rs274ngc_return.hh:189 emc/rs274ngc/rs274ngc_return.hh:231 msgid "Invalid to select both a digital and an analog input with M66" msgstr "" "Befehl M66 kann nicht gleichtzeitig einen Analog- und Digitaleingang " "auswählen" #: src/emc/rs274ngc/rs274ngc_return.hh:189 #: src/emc/rs274ngc/rs274ngc_return.hh:190 emc/rs274ngc/rs274ngc_return.hh:232 msgid "Need to have either a valid P or a valid E word with M66" msgstr "Befehl M66 muss ein gültiges P- oder E-Wort enthalten" #: src/emc/rs274ngc/rs274ngc_return.hh:190 #: src/emc/rs274ngc/rs274ngc_return.hh:191 emc/rs274ngc/rs274ngc_return.hh:233 msgid "Q word missing with g73" msgstr "Q-Wort fehlt bei G73" #: src/emc/rs274ngc/rs274ngc_return.hh:191 #: src/emc/rs274ngc/rs274ngc_return.hh:192 emc/rs274ngc/rs274ngc_return.hh:234 msgid "Digital input selected out of bounds" msgstr "Gewählter Digitaleingang liegt außerhalb des gültigen Bereichs" #: src/emc/rs274ngc/rs274ngc_return.hh:192 #: src/emc/rs274ngc/rs274ngc_return.hh:193 emc/rs274ngc/rs274ngc_return.hh:235 msgid "Analog input selected out of bounds" msgstr "Gewählter Analogeingang liegt außerhalb des gültigen Bereichs" #: src/emc/rs274ngc/rs274ngc_return.hh:193 #: src/emc/rs274ngc/rs274ngc_return.hh:194 emc/rs274ngc/rs274ngc_return.hh:236 msgid "W value unspecified in UV plane canned cycle" msgstr "Keine Angabe eines W-Wertes bei Arbeitszyklus in UV-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:194 #: src/emc/rs274ngc/rs274ngc_return.hh:195 emc/rs274ngc/rs274ngc_return.hh:237 msgid "U value unspecified in VW plane canned cycle" msgstr "Keine Angabe eines U-Wertes bei Arbeitszyklus in VW-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:195 #: src/emc/rs274ngc/rs274ngc_return.hh:196 emc/rs274ngc/rs274ngc_return.hh:238 msgid "V value unspecified in UW plane canned cycle" msgstr "Keine Angabe eines V-Wertes bei Arbeitszyklus in UW-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:196 #: src/emc/rs274ngc/rs274ngc_return.hh:197 emc/rs274ngc/rs274ngc_return.hh:239 msgid "R less than W in cycle in UV plane" msgstr "R ist kleiner als W während Arbeitszyklus in UV-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:197 #: src/emc/rs274ngc/rs274ngc_return.hh:198 emc/rs274ngc/rs274ngc_return.hh:240 msgid "R less than U in cycle in VW plane" msgstr "R ist kleiner als U während Arbeitszyklus in VW-Ebene" #: src/emc/rs274ngc/rs274ngc_return.hh:198 #: src/emc/rs274ngc/rs274ngc_return.hh:199 emc/rs274ngc/rs274ngc_return.hh:241 msgid "R less than V in cycle in UW plane" msgstr "R ist kleiner als V während Arbeitszyklus in UW-Ebene" #: src/emc/rs274ngc/interp_check.cc:316 #, fuzzy msgid "P value must be 0,1,or 2 with M19" msgstr "P-Wert ausserhalb des gültigen Bereichs bei G10 L2" #: src/emc/rs274ngc/interp_namedparams.cc:191 #, fuzzy, c-format msgid "cant open ini file '%s'" msgstr "Die Datei »%s« kann nicht geöffnet werden." #: src/emc/motion/control.c:578 #, c-format msgid "fault %d during orient in progress" msgstr "" #: src/emc/rs274ngc/interp_check.cc:314 #, fuzzy msgid "P value not an integer with M19 G2 or G3" msgstr "P-Wert bei Verwendung von G10 L2 ist keine Ganzzahl" #: src/emc/rs274ngc/interp_check.cc:326 #, fuzzy msgid "" "Q word with no G5, G10, G64, G73, G76, G83, M19, M66, M67, M68 or user M " "code that uses it" msgstr "E-Wort ohne zugehörige Angabe von G76 oder M66" #: src/emc/rs274ngc/interp_check.cc:336 #, fuzzy msgid "R value must be within 0..360 with M19" msgstr "P-Wert ausserhalb des gültigen Bereichs bei G10 L2" #: src/emc/rs274ngc/interp_convert.cc:2786 #, c-format msgid "" "BUG: cannot restore from a lower call level (%d) to a higher call level (%d)" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2787 #, c-format msgid "BUG: restore from level %d !?" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2788 #, c-format msgid "BUG: restore to level %d !?" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2807 #, c-format msgid "M7x: restore_settings G20/G21 failed: '%s'" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:2819 #, c-format msgid "M7x: restore_settings failed executing: '%s': %s" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:3012 msgid "Need non-negative Q-word to specify tool number with M61" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:3087 msgid "Q word with M19 requires a value > 0" msgstr "" #: src/emc/rs274ngc/interp_convert.cc:3115 msgid "Cannot restore context from invalid stack frame - missing M70/M73?" msgstr "" #: src/emc/rs274ngc/interp_namedparams.cc:208 #, c-format msgid "Named ini parameter #<%s> not found in inifile '%s': error=0x%x" msgstr "" #: src/emc/rs274ngc/interp_namedparams.cc:232 #, c-format msgid "fetch_hal_param: hal_init(%s): %d" msgstr "" #: src/emc/rs274ngc/interp_namedparams.cc:233 #, c-format msgid "fetch_hal_param: hal_ready(): %d" msgstr "" #: src/emc/rs274ngc/interp_namedparams.cc:378 #, c-format msgid "Cannot assign to read-only parameter #<%s>" msgstr "" #: src/emc/rs274ngc/interp_namedparams.cc:682 #, c-format msgid "BUG: lookup_named_param(%s): unhandled index=%fn" msgstr "" #: src/emc/rs274ngc/rs274ngc_return.hh:169 msgid "Bug: call stack underrun" msgstr "" #: hal/utils/meter.c:193 #, c-format msgid "ERROR: -s option needs pin/signal/parameter type and name designated\n" msgstr "" "FEHLER: »-s«-Option benötigt einen Pin, ein Signal oder einen Parameter mit " "Namen\n" #: hal/utils/meter.c:327 msgid "Select item to display" msgstr "Element zum Anzeigen auswählen" #: ../tcl/bin/pickconfig.tcl:177 msgid "ERROR: must specify a path to search for configurations" msgstr "FEHLER: Es muss ein Pfad zu den Konfigurationen angegeben werden." #: ../tcl/bin/pickconfig.tcl:366 msgid "No" msgstr "Nein" #: ../tcl/tkemc.tcl:423 msgid "About TkEmc" msgstr "Über TkEmc" #: ../tcl/tkemc.tcl:456 msgid "Length:" msgstr "Länge:" #: ../tcl/tkemc.tcl:460 msgid "Diameter:" msgstr "Durchmesser:" #: ../tcl/tkemc.tcl:791 msgid "Tools..." msgstr "Werkzeugtabelle..." #: emc/usr_intf/axis/scripts/axis.py:212 msgid "Switch between preview and DRO" msgstr "Zwischen Vorschau und DRO wechseln" #: emc/usr_intf/stepconf/stepconf.glade:371 msgid "Out" msgstr "Ausgang" #: emc/usr_intf/pncconf/pncconf.py:277 #, fuzzy msgid "X PWM Direction" msgstr "X Richtung" #: emc/usr_intf/pncconf/pncconf.py:277 #, fuzzy msgid "Y PWM Direction" msgstr "Y Richtung" #: emc/usr_intf/pncconf/pncconf.py:277 #, fuzzy msgid "Z PWM Direction" msgstr "Z Richtung" #: emc/usr_intf/pncconf/pncconf.py:278 #, fuzzy msgid "A PWM Direction" msgstr "A Richtung" #: emc/usr_intf/pncconf/pncconf.py:278 #, fuzzy msgid "Spindle PWM Pulse Stream" msgstr "Spindel PWM" #: emc/usr_intf/pncconf/pncconf.py:278 #, fuzzy msgid "Spindle PWM Enable" msgstr "Spindel PWM" #: emc/usr_intf/pncconf/pncconf.py:301 #, fuzzy msgid "Spindle Encoder-B Phase" msgstr "Spindelencoder Kanal A" #: emc/usr_intf/pncconf/pncconf.py:301 #, fuzzy msgid "Spindle Encoder-I Phase" msgstr "Spindelencoder Kanal A" #: emc/usr_intf/pncconf/pncconf.py:301 #, fuzzy msgid "Spindle Encoder-M Phase" msgstr "Spindelencoder Kanal A" #: emc/usr_intf/pncconf/pncconf.py:320 #, fuzzy msgid "X StepGen-Direction" msgstr "X Richtung" #: emc/usr_intf/pncconf/pncconf.py:321 #, fuzzy msgid "Y StepGen-Step" msgstr "Y Schritt" #: emc/usr_intf/pncconf/pncconf.py:321 #, fuzzy msgid "Y StepGen-Direction" msgstr "Y Richtung" #: emc/usr_intf/pncconf/pncconf.py:322 #, fuzzy msgid "Z StepGen-Step" msgstr "Z Schritt" #: emc/usr_intf/pncconf/pncconf.py:322 #, fuzzy msgid "Z StepGen-Direction" msgstr "Z Richtung" #: emc/usr_intf/pncconf/pncconf.py:323 #, fuzzy msgid "A StepGen-Step" msgstr "A Schritt" #: emc/usr_intf/pncconf/pncconf.py:323 #, fuzzy msgid "A StepGen-Direction" msgstr "A Richtung" #: emc/usr_intf/pncconf/pncconf.py:324 #, fuzzy msgid "spindle StepGen-Direction" msgstr "X Richtung" #: emc/usr_intf/pncconf/pncconf.py:324 #, fuzzy msgid "spindle reserved c" msgstr "Spindel zurück" #: emc/usr_intf/pncconf/pncconf.py:324 #, fuzzy msgid "spindle reserved d" msgstr "Spindel zurück" #: emc/usr_intf/pncconf/pncconf.py:324 #, fuzzy msgid "spindle reserved e" msgstr "Spindel zurück" #: emc/usr_intf/pncconf/pncconf.py:3286 #, fuzzy msgid "degrees / rev" msgstr "Grad / Umdrehung" #: emc/usr_intf/pncconf/pncconf.py:3288 #, fuzzy msgid "degrees / sec²" msgstr "Grad / s²" #: emc/usr_intf/pncconf/pncconf.py:3294 #, fuzzy msgid "degree / Step" msgstr "Grad / Umdrehung" #: emc/usr_intf/pncconf/pncconf.py:3295 #, fuzzy msgid "Steps / degree" msgstr "Schritte / Grad" #: emc/usr_intf/pncconf/pncconf.py:3304 #, fuzzy msgid "(mm / rev)" msgstr "mm / Umdrehung" #: emc/usr_intf/pncconf/pncconf.py:3323 #, fuzzy msgid "(rev / inch)" msgstr "Umdrehungen / in" #: emc/usr_intf/pncconf/pncconf.py:3324 emc/usr_intf/pncconf/pncconf.py:3326 #: emc/usr_intf/pncconf/pncconf.py:3327 emc/usr_intf/pncconf/pncconf.py:3328 #, fuzzy msgid "inches / min" msgstr "inch" #: emc/usr_intf/pncconf/pncconf.py:3325 #, fuzzy msgid "inches / sec²" msgstr "in / s²" #: emc/usr_intf/pncconf/pncconf.py:3331 #, fuzzy msgid "inches / Step" msgstr "inch" #: emc/usr_intf/pncconf/pncconf.py:3332 #, fuzzy msgid "Steps / inch" msgstr "Schritte / in" #: emc/usr_intf/pncconf/pncconf.glade:464 #, fuzzy msgid "Base Period Maximum Jitter:" msgstr "Maximale Systemtakt-Abweichung (_Jitter):" #: emc/usr_intf/pncconf/pncconf.glade:893 #, fuzzy msgid "Switch and index" msgstr "Spindelencoder Index" #: emc/usr_intf/pncconf/pncconf.glade:1151 #, fuzzy msgid "TKemc" msgstr "Anwenden" #: emc/usr_intf/pncconf/pncconf.glade:4599 #: emc/usr_intf/pncconf/pncconf.glade:4611 #: emc/usr_intf/pncconf/pncconf.glade:4795 #: emc/usr_intf/pncconf/pncconf.glade:4809 #: emc/usr_intf/pncconf/pncconf.glade:7380 #: emc/usr_intf/pncconf/pncconf.glade:7394 #: emc/usr_intf/pncconf/pncconf.glade:10121 #: emc/usr_intf/pncconf/pncconf.glade:10135 #, fuzzy msgid "Pin" msgstr "in" #: emc/usr_intf/pncconf/pncconf.glade:15325 #: emc/usr_intf/pncconf/pncconf.glade:17552 #, fuzzy msgid "Driver Microstepping:" msgstr "M_ikroschritte (Vollschritt:1, Halbschritt:2, usw.):" #: emc/usr_intf/pncconf/pncconf.glade:16574 #, fuzzy msgid "to" msgstr "_bis" #: emc/usr_intf/pncconf/pncconf.glade:16605 #, fuzzy msgid "Table Travel:" msgstr "V_erfahrweg:" #: emc/usr_intf/pncconf/pncconf.glade:16742 #, fuzzy msgid "Home Switch location:" msgstr "Re_ferenzschalter:" #: emc/usr_intf/pncconf/pncconf.glade:18238 #, fuzzy msgid "Speed 1:" msgstr "_Drehzahl 1:" #: emc/usr_intf/pncconf/pncconf.glade:18282 #, fuzzy msgid "Speed 2:" msgstr "D_rehzahl 2:" #: emc/usr_intf/pncconf/pncconf.glade:18295 #, fuzzy msgid "PWM 1:" msgstr "entspricht _PWM 1:" #: emc/usr_intf/pncconf/pncconf.glade:18310 #, fuzzy msgid "PWM 2:" msgstr "entspricht P_WM 2:" #: emc/usr_intf/pncconf/pncconf.glade:19281 #, fuzzy msgid "Realtime Components" msgstr "Erweiterte Konfiguration" #: emc/usr_intf/pncconf/pncconf.glade:19485 #, fuzzy msgid "Step generator" msgstr "Programm schrittweise ausführen" #: emc/usr_intf/pncconf/pncconf.glade:23393 #, fuzzy msgid "button" msgstr "Auto" #: emc/task/emctaskmain.cc:3082 #, c-format msgid "Minimum Software Limit on axis %d exceeded." msgstr "Unteres Software-Limit der Achse %d ist erreicht." #: emc/task/emctaskmain.cc:3091 #, c-format msgid "Maximum Software Limit on axis %d exceeded." msgstr "Oberes Software-Limit der Achse %d ist erreicht." #: emc/rs274ngc/interp_convert.cc:2780 #, fuzzy msgid "Cannot call user-defined M code with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" #: emc/rs274ngc/rs274ngc_return.hh:12 msgid "Bad character used" msgstr "Ungültiges Zeichen benutzt" #: emc/rs274ngc/rs274ngc_return.hh:21 msgid "Bug code not g40 g41 or g42" msgstr "Wort ist nicht G40, G41 oder G42" #: emc/rs274ngc/rs274ngc_return.hh:22 msgid "Bug code not g43 or g49" msgstr "Wort ist nicht G43 oder G49" #: emc/rs274ngc/rs274ngc_return.hh:26 msgid "Bug code not g93 or g94" msgstr "Wort ist nicht G93 oder G94" #: emc/rs274ngc/rs274ngc_return.hh:39 msgid "Cannot change units with cutter radius comp" msgstr "" "Die aktuelle verwendete Maßeinheit (Inch oder mm) kann nicht bei aktiver " "Werkzeugbahnkorrektur geändert werden" # Anmerkung:FJ: Probing? Abtast-Fahrt? Tast-Fahrt? Abtast-Arbeitszyklus? Tast-Arbeitszyklus? Andere Vorschläge? # Anmerkung Thomas: Antasten vielleicht ? # Anmerkung:FJ: Ne, ist wohl mehr als nur Antasten. EMC kann Werkstücke abtasten (-> Digitalisieren) # Einen passenden Messtaster vorausgesetzt ... #: emc/rs274ngc/rs274ngc_return.hh:44 msgid "Cannot move rotary axes during probing" msgstr "Rotations-Achse kann während einer Abtast-Fahrt nicht bewegt werden " #: emc/rs274ngc/rs274ngc_return.hh:53 msgid "Cannot turn cutter radius comp on out of xy plane" msgstr "Werkzeugbahnkorrektur funktioniert nur innerhalb der XY-Ebene" #: emc/rs274ngc/rs274ngc_return.hh:55 msgid "Cannot use a word" msgstr "Das Koordinaten-Wort A kann hier nicht verwendet werden" #: emc/rs274ngc/rs274ngc_return.hh:58 msgid "Cannot use b word" msgstr "Das Koordinaten-Wort B kann hier nicht verwendet werden" # Anmerkung:FJ: Hmmmm .... #: emc/rs274ngc/rs274ngc_return.hh:59 msgid "Cannot use c word" msgstr "Das Koordinaten-Wort C kann hier nicht verwendet werden" #: emc/rs274ngc/rs274ngc_return.hh:64 msgid "Cannot use xz plane with cutter radius comp" msgstr "" "XZ-Ebene kann nicht zusammen mit aktiver Werkzeugbahnkorrektur benutzt werden" #: emc/rs274ngc/rs274ngc_return.hh:65 msgid "Cannot use yz plane with cutter radius comp" msgstr "" "YZ-Ebene kann nicht zusammen mit aktiver Werkzeugbahnkorrektur benutzt werden" #: emc/rs274ngc/rs274ngc_return.hh:67 msgid "Concave corner with cutter radius comp" msgstr "Konkave Ecke mit aktiver Werkzeugbahnkorrektur" #: emc/rs274ngc/rs274ngc_return.hh:68 msgid "Coordinate system index parameter 5220 out of range" msgstr "" "Koordinaten-System Index-Parameter 5220 ausserhalb des gültigen Bereichs" # Anmerkung:FJ: gouging -> Furche / Riefe! Kontext checken ... #: emc/rs274ngc/rs274ngc_return.hh:70 msgid "Cutter gouging with cutter radius comp" msgstr "Konturverletzung bei Werkzeugbahnkorrektur" #: emc/rs274ngc/rs274ngc_return.hh:71 msgid "D word with no g41 or g42" msgstr "Benutzung eines D-Wörters ohne Angabe von G41 oder G42" #: emc/rs274ngc/rs274ngc_return.hh:84 msgid "H word with no g43" msgstr "Benutzung eines H-Wörters ohne G43" #: emc/rs274ngc/rs274ngc_return.hh:87 msgid "I word with no g2, g3, g87, or g43 to use it" msgstr "I-Wörters ohne zugehörige Angabe von G2, G3, G43 oder G87" #: emc/rs274ngc/rs274ngc_return.hh:94 msgid "L word with no canned cycle, g10, or g76 to use it" msgstr "Angabe eines L-Wörters ohne zugehörigen Arbeitszyklus G10 oder G76" #: emc/rs274ngc/rs274ngc_return.hh:133 msgid "No digits found where real number should be" msgstr "Reelle Zahl erwartet, aber keinerlei Ziffern gefunden" #: emc/rs274ngc/rs274ngc_return.hh:136 msgid "Offset index missing" msgstr "Offset-Index fehlt" #: emc/rs274ngc/rs274ngc_return.hh:139 msgid "P word with no g4 g10 g64 g76 g82 g86 g88 g89" msgstr "" "Benutzung eines P-Wörters ohne zugehörigen Befehl G4, G10, G64, G76, G82, " "G86, G88, oder G89" #: emc/rs274ngc/rs274ngc_return.hh:143 msgid "Q word with no g83 or m66" msgstr "Angabe eines Q-Wörters ohne G83, oder M66" #: emc/rs274ngc/rs274ngc_return.hh:151 msgid "Radius to end of arc differs from radius to start" msgstr "" "Radius zum Ende des Kreisbogens unterscheidet sich vom Radius am Start des " "Kreisbogens" #: emc/rs274ngc/rs274ngc_return.hh:152 msgid "Radius too small to reach end point" msgstr "Radius zu klein zum Erreichen des Endpunktes" #: emc/rs274ngc/rs274ngc_return.hh:153 msgid "Required parameter missing" msgstr "Benötigter Parameter fehlt" #: emc/rs274ngc/rs274ngc_return.hh:154 msgid "Selected tool slot number too large" msgstr "Angegebene Werkzeug-Nummer zu groß" #: emc/rs274ngc/rs274ngc_return.hh:165 msgid "Tool radius index too big" msgstr "Werkzeug-Tabellen-Index zu groß" #: emc/rs274ngc/rs274ngc_return.hh:191 msgid "X, y, z, a, b, c, u, v, and w words all missing with g38.2" msgstr "" "Keine Angabe eines X-, Y-, Z-, A-, B-, C-, U-, V-, und W-Wörters bei g38.2" #: emc/rs274ngc/rs274ngc_return.hh:199 msgid "G33 not supported" msgstr "G33 wird nicht unterstützt" #: emc/rs274ngc/rs274ngc_return.hh:200 msgid "Canned cycles not supported" msgstr "Abeitszyklen werden nicht unterstützt" #: ../tcl/bin/emccalib.tcl:80 msgid "EMC2 Servo Axis Calibration" msgstr "EMC2 Achsen-Kalibrierung" #: ../tcl/bin/emcdebug.tcl:166 ../tcl/bin/emcdebug.tcl:177 msgid "EMC Debug" msgstr "EMC2 Debug" #: ../tcl/bin/halconfig.tcl:1281 msgid "" "Copyright Raymond E Henry. 2006\n" "License: GPL Version 2\n" "\n" "Halconfig is an EMC2 configuration tool. It should be started from the emc2 " "directory and will require that you have started an instance of emc2 or work " "up a new configuration starting with a demo rt script.\n" "\n" "This script is not for the faint hearted and carries no warranty or " "liability for its use to the extent allowed by law." msgstr "" #: ../tcl/bin/pickconfig.tcl:189 msgid "EMC2 Configuration Selector" msgstr "EMC2 Konfigurationsassistent" #: ../tcl/bin/pickconfig.tcl:210 msgid "" "Welcome to EMC2.\n" "\n" "Select a machine configuration from the list on the left.\n" "Details about the selected configuration will appear in the display on the " "right.\n" "Click 'OK' to run the selected configuration" msgstr "" "Willkommen zu EMC2.\n" "\n" "Wählen Sie eine Maschinenkonfiguration aus der Liste.\n" "Eine Beschreibung der gewählte Konfiguration wird auf der rechten Seite " "angezeigt.\n" "Bestätigen Sie mit »OK«, um die gewählte Konfiguration zu laden." #: ../tcl/bin/pickconfig.tcl:401 #, tcl-format msgid "" "The configuration file has been copied to %s. Next time, choose this " "location when starting EMC2." msgstr "" "Die Konfiguration wurde erfolgreich in das Verzeichnis »%s« kopiert. Beim " "nächsten Start von EMC2 kann diese ausgewählt werden." #: ../tcl/bin/tkbackplot.tcl:110 msgid "TkEmc BackPlot" msgstr "TkEMC Backplot" #: ../tcl/show_errors.tcl:41 msgid "EMC2 Errors" msgstr "Fehler" #: ../tcl/show_errors.tcl:44 msgid "" "EMC2 terminated with an error. When reporting problems, please include all " "the information below in your message." msgstr "" "EMC2 wurde mit einem Fehler beendet. Falls Sie den Fehler melden wollen, " "fügen Sie bitte Ihrer Mitteilung die unten stehenden Informationen bei." #: ../tcl/tkemc.tcl:259 msgid "Load Tool Table" msgstr "Speichern" #: ../tcl/tkemc.tcl:334 msgid "EMC Diagnostics" msgstr "EMC2 Diagnose" #: ../tcl/tkemc.tcl:424 msgid "" "TkEmc\n" "\n" "Tcl/Tk GUI for Enhanced Machine Controller version 2 (EMC2)\n" "\n" "GPL Version 2 (2006)" msgstr "" "TkEmc\n" "\n" "Grafische Oberfläche in Tcl/Tk für den\n" "»Enhanced Machine Controller«, Version 2 (EMC2)\n" "\n" "\n" "GPL Version 2 (2006)" #: ../tcl/scripts/Set_Coordinates.tcl:23 msgid "EMC Set Coordinate" msgstr "EMC2 Koordinaten-Setup" #: emc/usr_intf/axis/scripts/axis.py:3144 #, python-format msgid "Enter %s coordinate relative to workpiece:" msgstr "%s-Koordinate relativ zum Werkstück" #: emc/usr_intf/axis/scripts/debuglevel.py:22 msgid "EMC2 Debug Level" msgstr "Debug-Stufe" #: ../share/axis/tcl/axis.tcl:180 msgid "Sho_w EMC Status" msgstr "EM_C-Status..." #: ../share/axis/tcl/axis.tcl:1667 msgid "" "EMC2/AXIS version $version\n" "\n" "Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009 Jeff Epler and Chris " "Radek.\n" "\n" "This is free software, and you are welcome to redistribute it under certain " "conditions. See the file COPYING, included with EMC2.\n" "\n" "Visit the EMC web site: " msgstr "" "EMC2/AXIS Version $version\n" "\n" "Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009 Jeff Epler und Chris " "Radek.\n" "\n" "Dieses Programm ist freie Software. Sie sind eingeladen, es unter bestimmten " "Bedingungen weiter zu verbreiten. Lesen Sie hierzu die Datei COPYING, die " "EMC2 beigelegt ist.\n" "\n" "Deutsche Übersetzung: Alex Joni, Florian Hahn, Ingrid Kirst\n" "\n" "Besuchen Sie die EMC-Webseite: " #: emc/usr_intf/stepconf/stepconf.py:989 emc/usr_intf/pncconf/pncconf.py:1570 msgid "" "# **** Setup of spindle speed and tool number display using pyvcp -START ****" msgstr "" #: emc/usr_intf/stepconf/stepconf.py:992 emc/usr_intf/pncconf/pncconf.py:1573 msgid "" "# **** spindle-velocity is signed so we use absolute compoent to remove sign" msgstr "" #: emc/usr_intf/stepconf/stepconf.py:1000 emc/usr_intf/pncconf/pncconf.py:1581 msgid "" "# **** Use COMMANDED spindle velocity from EMC because no spindle encoder " "was specified" msgstr "" #: emc/usr_intf/stepconf/stepconf.py:1095 msgid "Desktop Launcher for EMC config made by Stepconf" msgstr "" "Verknüpfung zum starten von EMC mit einer festgelegten Konfiguration, " "erstellt von Stepconf" #: emc/usr_intf/stepconf/stepconf.py:1208 msgid "EMC2 'stepconf' configuration files" msgstr ".stepconf Dateien" #: emc/usr_intf/stepconf/stepconf.glade:22 msgid "" "This program creates configuration files (.ini and .hal) for \"step and " "direction\" milling machines and lathes connected to the PC parallel port." msgstr "" "Dieses Programm erstellt Konfigurationsdateien (.ini und .hal) für Fräs- und " "Drehmaschinen mit »Schritt- und Richtung«-Schnittstelle, die über den " "Druckeranschluss mit dem PC verbunden sind." #: emc/usr_intf/stepconf/stepconf.glade:565 msgid "" "Driver characteristics: (Multiply by 1000 for times specified in µs or " "microseconds)\n" "\n" "Additional signal conditioning or isolation such as optocouplers and RC " "filters\n" "can impose timing constraints of their own, in addition to those of the " "driver." msgstr "" "Einstellungen für Endstufe (alle Zeiten in Nanosekunden = 10^-9 s):\n" "Zusätzliche Signalverarbeitungsbausteine oder Maßnahmen zur galvanischen \n" "Trennung, wie Optokoppler oder RC-Filter, können zusätzliche Zeit benötigen." #: emc/usr_intf/stepconf/stepconf.glade:3420 #: emc/usr_intf/pncconf/pncconf.glade:1263 #, fuzzy msgid "Spindle speed/tool position display " msgstr "Spindel-Drehzahl- / Werkzeug-Positions-Anzeige" #: emc/usr_intf/stepconf/stepconf.glade:3518 #, fuzzy msgid "Pyvcp Example Options" msgstr "PyVCP-Beispiele" #: emc/usr_intf/stepconf/stepconf.glade:3908 msgid "PLC Options" msgstr "SPS-Optionen" #: emc/usr_intf/stepconf/stepconf.glade:3935 #: emc/usr_intf/pncconf/pncconf.glade:19852 msgid "" "All the necessary information has now been gathered. Click \"Apply\" to " "write your configuration files to disk.\n" "If you experience lockups while running emc, you will need to decrease the " "maximum velocity which will have the effect of increasing BASE_PERIOD.\n" "\n" "If you experience lost steps while running emc, first verify that you " "entered the proper timings for your stepper drivers. If that does not fix " "the problem, then run a more thorough latency test as described on the " "linuxcnc.org wiki:\n" " http;//wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TroubleShooting\n" "\n" "If you experience the \"Unexpected Realtime Delay\" message, run a more " "thorough latency test as described on the linuxcnc.org wiki: \n" " http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TroubleShooting" msgstr "" "Alle notwendigen Informationen wurden erfasst. Bestätigen Sie mit »Anwenden«, " "um die Konfiguration zu speichern.\n" "Falls EMC2 nicht mehr reagieren sollte, verkleinern Sie die maximale " "Geschwindigkeit, was die Zeit für einen Systemtakt (BASE_PERIOD) " "vergrößert.\n" "\n" "Falls Sie Schrittverluste bemerken sollten, überprüfen Sie zuerst die " "Zeiteinstellungen für ihre Endstufe. Wird das Problem hierdurch nicht " "behoben, dann führen bitte weiter Maßnahmen durch, wie sie im EMC2-Wiki " "beschrieben werden:\n" " http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TroubleShooting\n" "\n" "Falls Sie die Fehlermeldung »Unexpected Realtime Delay« erhalten, dann führen " "bitte weiter Maßnahmen durch, wie sie im EMC2-Wiki beschrieben werden:\n" " http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TroubleShooting" #: emc/usr_intf/pncconf/pncconf.py:114 msgid "HDW Encoder-A" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:114 msgid "HDW Encoder-B" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:114 msgid "HDW Encoder-I" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:114 msgid "HDW Encoder-M" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:115 msgid "HDW Step Gen-A" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:115 msgid "HDW Step Gen-B" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:116 msgid "HDW PWM Gen-P" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:116 msgid "HDW PWM Gen-D" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:116 msgid "HDW PWM Gen-E" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:117 msgid "HDW PDM Gen-P" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:117 msgid "HDW PDM Gen-D" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:117 msgid "HDW PDM Gen-E" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:252 #, fuzzy msgid "Jog select input A" msgstr "Aktive Achse verfahren" #: emc/usr_intf/pncconf/pncconf.py:252 #, fuzzy msgid "Jog select input B" msgstr "Aktive Achse verfahren" #: emc/usr_intf/pncconf/pncconf.py:252 #, fuzzy msgid "Jog select input C" msgstr "Aktive Achse verfahren" #: emc/usr_intf/pncconf/pncconf.py:253 msgid "Axis select input A" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:253 msgid "Axis select input B" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:253 msgid "Axis select input C" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:253 msgid "Axis select input D" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:277 msgid "X PWM Pulse Stream" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:277 msgid "X PWM Enable" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:277 msgid "Y PWM Pulse Stream" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:277 msgid "Y PWM Enable" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:277 msgid "Z PWM Pulse Stream" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:277 msgid "Z PWM Enable" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:277 msgid "A PWM Pulse Stream" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:278 msgid "A PWM Enable" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:278 #, fuzzy msgid "Spindle PWM Direction" msgstr "Spindel PWM" #: emc/usr_intf/pncconf/pncconf.py:298 msgid "X Encoder-A Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:298 msgid "X Encoder-B Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:298 msgid "X Encoder-I Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:298 msgid "X Encoder-M Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:299 msgid "Y Encoder-A Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:299 msgid "Y Encoder-B Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:299 msgid "Y Encoder-I Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:299 msgid "Y Encoder-M Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:299 msgid "Z Encoder-A Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:299 msgid "Z Encoder-B Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:300 msgid "Z Encoder-I Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:300 msgid "Z Encoder-M Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:300 msgid "A Encoder-A Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:300 msgid "A Encoder-B Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:300 msgid "A Encoder-I Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:300 msgid "A Encoder-M Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:301 #, fuzzy msgid "Spindle Encoder-A Phase" msgstr "Spindelencoder Kanal A" #: emc/usr_intf/pncconf/pncconf.py:301 msgid "X Hand Wheel-A Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:302 msgid "X Hand Wheel-B Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:302 msgid "X Hand Wheel-I Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:302 msgid "X Hand Wheel-M Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:302 msgid "Y Hand wheel-A Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:302 msgid "Y Hand Wheel-B Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:303 msgid "Y Hand Wheel-I Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:303 msgid "Y Hand Wheel-M Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:303 msgid "Z Hand Wheel-A Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:303 msgid "Z Hand Wheel-B Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:303 msgid "Z Hand Wheel-I Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:304 msgid "Z Hand Wheel-M Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:304 msgid "A Hand Wheel-A Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:304 msgid "A Hand Wheel-B Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:304 msgid "A Hand Wheel-I Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:304 msgid "A Hand Wheel-M Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:305 msgid "Multi Hand Wheel-A Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:305 msgid "Multi Hand Wheel-B Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:305 msgid "Multi Hand Wheel-I Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:305 msgid "Multi Hand Wheel-M Phase" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:320 #, fuzzy msgid "X StepGen-Step" msgstr "X Schritt" #: emc/usr_intf/pncconf/pncconf.py:320 msgid "X reserved c" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:320 msgid "X reserved d" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:321 msgid "X reserved e" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:321 msgid "X reserved f" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:321 msgid "Y reserved c" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:321 msgid "Y reserved d" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:321 msgid "Y reserved e" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:322 msgid "Y reserved f" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:322 msgid "Z reserved c" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:322 msgid "Z reserved d" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:322 msgid "Z reserved e" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:322 msgid "Z reserved f" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:323 msgid "A reserved c" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:323 msgid "A reserved d" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:323 msgid "A reserved e" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:323 msgid "A reserved f" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:324 #, fuzzy msgid "spindle StepGen-Step" msgstr "X Schritt" #: emc/usr_intf/pncconf/pncconf.py:325 #, fuzzy msgid "spindle reserved f" msgstr "Spindel zurück" #: emc/usr_intf/pncconf/pncconf.py:351 #, fuzzy msgid "my_EMC_machine" msgstr "_Maschine" #: emc/usr_intf/pncconf/pncconf.py:1510 msgid "# estop signals" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:1588 msgid "" "# **** Setup of spindle speed and tool number display using pyvcp -END ****" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:1590 msgid "" "# **** Setup of pyvcp buttons and MDI commands using HAL_UI and pyvcp - " "START ****" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:1606 msgid "" "# **** The following mdi-comands are specified in the machine named INI file " "under [HALUI] heading" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:1620 msgid "" "# **** Setup of pyvcp buttons and MDI commands using HAL_UI and pyvcp - END " "****" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:1645 msgid "configures EMC2 as:" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:1647 msgid "type CNC" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:1656 msgid "Mesa 5i20 connector 2 \n" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:1667 msgid "Mesa 5i20 connector 3 \n" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:1678 msgid "Mesa 5i20 connector 4 \n" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:1782 #, fuzzy msgid "Desktop Launcher for EMC config made by PNCconf" msgstr "" "Verknüpfung zum starten von EMC mit einer festgelegten Konfiguration, " "erstellt von Stepconf" #: emc/usr_intf/pncconf/pncconf.py:2080 #, fuzzy msgid "EMC2 'PNCconf' configuration files" msgstr ".stepconf Dateien" #: emc/usr_intf/pncconf/pncconf.py:3287 emc/usr_intf/pncconf/pncconf.py:3289 #: emc/usr_intf/pncconf/pncconf.py:3290 emc/usr_intf/pncconf/pncconf.py:3291 #, fuzzy msgid "degrees / min" msgstr "Grad / Umdrehung" #: emc/usr_intf/pncconf/pncconf.py:3297 #, fuzzy msgid "degrees / encoder pulse" msgstr "Grad / Umdrehung" #: emc/usr_intf/pncconf/pncconf.py:3298 msgid "Encoder pulses / degree" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:3306 #, fuzzy msgid "mm / sec²" msgstr "mm / s²" #: emc/usr_intf/pncconf/pncconf.py:3312 #, fuzzy msgid "mm / Step" msgstr "mm / Umdrehung" #: emc/usr_intf/pncconf/pncconf.py:3316 msgid "Encoder pulses / mm" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:3334 msgid "inches / encoder pulse" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:3335 msgid "Encoder pulses / inch" msgstr "" #: emc/usr_intf/pncconf/pncconf.py:3909 msgid "" " The test panel for this board and/or firmware should work fine for GPIO but " "maybe not so fine for other components.\n" " work in progress. \n" " You must have the board installed for it to work." msgstr "" #: emc/usr_intf/pncconf/pncconf.py:4365 msgid "" " You must designate a ENCODER signal and a PWM signal for this axis test" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:8 #, fuzzy msgid "EMC2 Point And Click Configuration" msgstr "EMC2 Maschinenkonfiguration" #: emc/usr_intf/pncconf/pncconf.glade:23 #, fuzzy msgid "EMC2 Configuration Wizard Alpha Version" msgstr "EMC2 Konfigurationsassistent" #: emc/usr_intf/pncconf/pncconf.glade:566 msgid "Mesa PCI / Parport Card:" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:826 msgid "Physical switches" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:840 msgid "" "Physical switches\n" "shared with home" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:858 msgid "Limit" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:907 msgid "Switch only" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:921 msgid "Index only" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:955 msgid "Limit And Homing Switches" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:990 msgid "External MPG Scale settings:" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:1124 #, fuzzy msgid "Onscreen prompt for tool change" msgstr "_Bildschirmmitteilung bei Werkzeugwechsel" #: emc/usr_intf/pncconf/pncconf.glade:1185 msgid "GUI list" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:1577 msgid "Mesa I/O setup\n" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:1596 msgid "" "Click on each page tab to configure signal names for each connector port.\n" "\n" "The spin buttons below on this page allow you to select the amouns of \n" "different types of components. Press the button to make the tabbed pages\n" "accept the changes.\n" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:1781 #: emc/usr_intf/pncconf/pncconf.glade:1969 msgid "htz" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:1891 msgid "Num of GPIO:" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:4629 msgid "" "Input / Output\n" " Connector 2" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:7266 msgid "" "Input / Output \n" " Connector 3" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:9903 msgid "" "Input / Output\n" " Connector 4" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:12540 msgid "" "Input / Output\n" " Connector 5" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:14711 #: emc/usr_intf/pncconf/pncconf.glade:16942 msgid "" "Open\n" "Loop\n" "Servo\n" "Test" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:14735 #: emc/usr_intf/pncconf/pncconf.glade:16966 #, fuzzy msgid "pulses / rev" msgstr "mm / Umdrehung" #: emc/usr_intf/pncconf/pncconf.glade:14754 #: emc/usr_intf/pncconf/pncconf.glade:16985 msgid "x 4 =" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:14802 #: emc/usr_intf/pncconf/pncconf.glade:17032 msgid "Encoder lines / Rev" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:14834 #: emc/usr_intf/pncconf/pncconf.glade:17063 msgid "Dac Output Offset:" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:15505 #: emc/usr_intf/pncconf/pncconf.glade:15522 #: emc/usr_intf/pncconf/pncconf.glade:17721 msgid "123" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:16547 #, fuzzy msgid "Home location:" msgstr "_Referenzpunkt:" #: emc/usr_intf/pncconf/pncconf.glade:19408 msgid "Add realtime components with this page." msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:19446 #, fuzzy msgid "Encoder" msgstr "Ende" #: emc/usr_intf/pncconf/pncconf.glade:19473 msgid "PWM generator" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:19554 #, fuzzy msgid "and" msgstr "Ende" #: emc/usr_intf/pncconf/pncconf.glade:19565 msgid "or" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:19686 #: emc/usr_intf/pncconf/pncconf.glade:19699 #: emc/usr_intf/pncconf/pncconf.glade:19712 #: emc/usr_intf/pncconf/pncconf.glade:19725 #: emc/usr_intf/pncconf/pncconf.glade:19738 #: emc/usr_intf/pncconf/pncconf.glade:19780 msgid "" "fast (base)\n" "slow (servo)" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:19761 msgid "Add to thread command" msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:19819 #, fuzzy msgid "Test Page" msgstr "Testbereich:" #: emc/usr_intf/pncconf/pncconf.glade:19828 msgid "Use this page to test / tune the configuration." msgstr "" #: emc/usr_intf/pncconf/pncconf.glade:19996 #, fuzzy msgid "estop" msgstr "Ausprobieren" #: emc/usr_intf/pncconf/pncconf.glade:21870 #: emc/usr_intf/pncconf/pncconf.glade:22570 #: emc/usr_intf/pncconf/pncconf.glade:23270 msgid "PID tuning" msgstr "" #: emc/rs274ngc/interp_arc.cc:108 emc/rs274ngc/interp_arc.cc:270 #, c-format msgid "" "Radius to end of arc differs from radius to start: start=(%c%.4f,%c%.4f) " "center=(%c%.4f,%c%.4f) end=(%c%.4f,%c%.4f) r1=%.4f r2=%.4f" msgstr "" "Radius am Kreisanfang unterscheidet sich vom Radius am Kreisende: Anfang=(%c" "%.4f,%c%.4f), Mittelpunkt=(%c%.4f,%c%.4f), Ende=(%c%.4f,%c%.4f), Radius 1=" "%.4f, Radius 2=%.4f" #: emc/rs274ngc/interp_convert.cc:2554 emc/rs274ngc/interp_convert.cc:2558 #, fuzzy msgid "Cannot set auxiliary output with cutter radius compensation on" msgstr "Ebene kann nicht bei aktiver Werkzeugradiuskorrektur gewechselt werden" # Anmerkung:FJ: Who the fuck is "inverse time feed mode"? :-))) # Angabe des Weges, der in einer Minuten zurückgelegt werden soll??? # Anmerkung Thomas: Wird benutzt beim Fünfachsfräsen (3 Linearachsen und 2 Rundachsen zusammen). # F100 -> 60/100 = Weg im Raum wird in 0,6s zurückgelegt. Einige CAM Systeme erzeugen solchen Code... # Anmerkung:FJ: DIN66025 nennt das "Zeitreziproke Vorschubverschlüsselung". Was es nicht alles gibt :-) !!!!! #: emc/rs274ngc/rs274ngc_return.hh:47 msgid "Cannot probe in inverse time feed mode" msgstr "Abtast-Fahrten sind im zeitreziproken Vorschub-Modus nicht möglich" #: emc/rs274ngc/rs274ngc_return.hh:90 msgid "J word with no g2, g3 or g87 to use it" msgstr "J-Wörters ohne zugehörige Angabe von G2, G3 oder G87" #: emc/rs274ngc/rs274ngc_return.hh:93 msgid "K word with no g2, g3, g33, g33.1, g76, g87, or g43.1 to use it" msgstr "" "K-Wort ohne zugehörige Angabe von G2, G3, G33, G33.1, G76, G87, oder G43.1" #: emc/rs274ngc/rs274ngc_return.hh:97 msgid "Line number greater than 99999" msgstr "Zeilennummer größer als 99999" #: emc/rs274ngc/rs274ngc_return.hh:98 msgid "Line with g10 does not have l2" msgstr "Zeile mit G10 enthält kein L2" #: emc/rs274ngc/rs274ngc_return.hh:137 msgid "P value not an integer with g10 l2" msgstr "P-Wert bei Verwendung von G10 L2 ist keine Ganzzahl" #: emc/rs274ngc/rs274ngc_return.hh:138 msgid "P value out of range with g10 l2" msgstr "P-Wert ausserhalb des gültigen Bereichs bei G10 L2" #: emc/rs274ngc/rs274ngc_return.hh:163 msgid "Tool length offset index too big" msgstr "Werkzeug-Längen-Index zu groß" # Anmerkung:FJ: Tool max? Was das? # Anmerkung:AJ: sollte "Index in tool table file too large" sein #: emc/rs274ngc/rs274ngc_return.hh:164 msgid "Tool max too large" msgstr "Werkzeug-Datei-Index zu groß" #: emc/rs274ngc/rs274ngc_return.hh:169 msgid "Unable to open file" msgstr "Datei kann nicht geöffnet werden" #: emc/rs274ngc/rs274ngc_return.hh:212 msgid "Return outside of subroutine" msgstr "" #: emc/rs274ngc/rs274ngc_return.hh:221 msgid "E word with no G76 or M66 to use it" msgstr "E-Wort ohne zugehörige Angabe von G76 oder M66" #: emc/rs274ngc/rs274ngc_return.hh:223 msgid "Named oword not terminated" msgstr "" #: emc/rs274ngc/rs274ngc_return.hh:224 msgid "Named oword not defined" msgstr "" #: emc/rs274ngc/rs274ngc_return.hh:226 msgid "X Y Z A B C J words not allowed with G43.1, G41 R, or G42 R" msgstr "" "Befehle G43.1, G41 R, und G42 R dürfen keine X-, Y-, Z-, A-, B-, C-. oder J-" "Wörter enthalten" #: share/axis/tcl/axis.tcl:1711 #, fuzzy msgid "" "LinuxCNC/AXIS version $version\n" "\n" "Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009 Jeff Epler and Chris " "Radek.\n" "\n" "This is free software, and you are welcome to redistribute it under certain " "conditions. See the file COPYING, included with LinuxCNC.\n" "\n" "Visit the LinuxCNC web site: " msgstr "" "EMC2/AXIS Version $version\n" "\n" "Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009 Jeff Epler und Chris " "Radek.\n" "\n" "Dieses Programm ist freie Software. Sie sind eingeladen, es unter bestimmten " "Bedingungen weiter zu verbreiten. Lesen Sie hierzu die Datei COPYING, die " "EMC2 beigelegt ist.\n" "\n" "Deutsche Übersetzung: Alex Joni, Florian Hahn, Ingrid Kirst\n" "\n" "Besuchen Sie die EMC-Webseite: " #~ msgid "_Modify a configuration already created with this program" #~ msgstr "" #~ "Eine bestehende, mit diesem Programm erstellte, Konfiguration _bearbeiten" #~ msgid "" #~ "Display\n" #~ "sample\n" #~ "panel" #~ msgstr "Beispiel-Panel anzeigen" #~ msgid "Spindle speed/tool position display" #~ msgstr "Spindel-Drehzahl- / Werkzeug-Positions-Anzeige" #~ msgid "Include Classicladder PLC" #~ msgstr "SPS (Classicladder) einbinden" #~ msgid "Number of analog (float) out pins:" #~ msgstr "Analoge Ausgänge (float):" #~ msgid "Number of analog (float) in pins:" #~ msgstr "Analoge Eingänge (float):" #~ msgid "Number of analog (s32) out pins:" #~ msgstr "Analoge Ausgänge (s32):" #~ msgid "Number of analog (s32) in pins:" #~ msgstr "Analoge Eingänge (s32):" #~ msgid "Number of digital out pins:" #~ msgstr "Digitale Ausgänge:" #~ msgid "" #~ "Edit\n" #~ "ladder\n" #~ "program" #~ msgstr "SPS-Programm bearbeiten" #, fuzzy #~ msgid "EMC2 Servo Configuration" #~ msgstr "EMC2 Maschinenkonfiguration" #, fuzzy #~ msgid "PWM Rate:" #~ msgstr "PWM-_Frequenz:" #~ msgid "Axis Speed:" #~ msgstr "Schrittgeschwindigkeit:" #~ msgid "Xylotex" #~ msgstr "Xylotex" #~ msgid "Exis_ting custom program" #~ msgstr "Bestehendes benutzerdefiniertes Programm" #~ msgid "mm / s^2" #~ msgstr "mm / s²" #~ msgid "" #~ "Include your PyVCP panel here.\n" #~ "The contents of this file will not be overwritten when you run stepconf " #~ "again." #~ msgstr "" #~ "Hier kann ein benutzerdefiniertes PyVCP-Panel eingebunden werden.\n" #~ "Diese Datei wird beim erneuten Aufruf von stepconf nicht überschrieben." #~ msgid "" #~ "Gecko\n" #~ "L297\n" #~ "PMDX-150\n" #~ "Sherline\n" #~ "Xylotex\n" #~ "Parker-oem750\n" #~ "Other" #~ msgstr "" #~ "Gecko\n" #~ "L297\n" #~ "PMDX-150\n" #~ "Sherline\n" #~ "Xylotex\n" #~ "Parker-oem750\n" #~ "Andere" #~ msgid "Test Now" #~ msgstr "Testen" #~ msgid "Space, Ctrl-Space" #~ msgstr "Leertaste, Strg-Leertaste" #~ msgid "Include custom _HAL configuration" #~ msgstr "Benutzerdefinierte _HAL-Konfiguration einbinden" #~ msgid "Unknown error" #~ msgstr "Unbekannter Fehler" #~ msgid "The End" #~ msgstr "Ende" #, fuzzy #~ msgid "expander" #~ msgstr "Menübaum aufklappen" #, fuzzy #~ msgid "Spindle Info" #~ msgstr "Spindelencoder Index" #, fuzzy #~ msgid "Cycles per revolution:" #~ msgstr "Encoder-_Takte pro Spindel-Umdrehung:" #~ msgid "No error" #~ msgstr "Kein Fehler"