### This file is needed to signal Classicladder to initialize modbus master/server
### and can be used to set the following items:

### if serial port name is blank => IP mode used
MODBUS_MASTER_SERIAL_PORT=/dev/ttyS0
###MODBUS_MASTER_SERIAL_PORT=
MODBUS_MASTER_SERIAL_SPEED=38400
MODBUS_MASTER_SERIAL_USE_RTS_TO_SEND=0
MODBUS_MASTER_TIME_INTER_FRAME=200
MODBUS_MASTER_TIME_OUT_RECEIPT=500
MODBUS_MASTER_TIME_AFTER_TRANSMIT=0