979 750 gmoccapy images/Logo.png True True True False 0 True True False True True True True False True True True True False False False False 0 True 13 5 48 48 True True True clear plot True images/clear.png 12 13 GTK_SHRINK GTK_SHRINK 48 48 True True True Zoom in img_zoom_in 8 9 GTK_SHRINK GTK_SHRINK 48 48 True True True Zoom out img_zoom_out 9 10 GTK_SHRINK GTK_SHRINK 48 48 True True False view perspective True False True images/toolaxisp.png GTK_SHRINK GTK_SHRINK 48 48 True True False view along the X axis from positive to negative False rbt_view_p True images/toolaxisx.png 1 2 GTK_SHRINK GTK_SHRINK 48 48 True True False view along the Y axis from positive to negative False rbt_view_p True images/toolaxisy.png 2 3 GTK_SHRINK GTK_SHRINK 48 48 True True False view along the Z axis from positive to negative 0.44999998807907104 False rbt_view_p 48 48 True images/toolaxisz.png 3 4 GTK_SHRINK GTK_SHRINK 48 48 True True True Show or hide tool path True images/toolpath.png 11 12 GTK_SHRINK GTK_SHRINK 48 48 True True True Show or hide dimensions True images/dimensions.png 10 11 GTK_SHRINK GTK_SHRINK 48 48 True True False view along the Y axis from positive to negative as viewn for a back tool lathe False rbt_view_p 48 48 True images/toolaxisy2.png 4 5 GTK_SHRINK GTK_SHRINK False 1 True Preview False True #ffff00000000 #adadd8d8e6e6 1 True Offset Page 1 False True 2 True Tooledit 2 False True ngc,py,bmp 3 True File Selection 3 False 2 0 0 360 True True 1 True 3 mm 48 48 True True True Toggle between metric and imperial units 2 3 GTK_SHRINK GTK_EXPAND | GTK_SHRINK DTG 48 48 True True True Switch DRO to DTG mode 1 2 GTK_SHRINK GTK_EXPAND | GTK_SHRINK Rel 48 48 True True True Toggle between machine and relative coordinates True GTK_SHRINK GTK_EXPAND | GTK_SHRINK False False 0 True 1 True Klick to toggle through the DRO modes 28 #0000ffff0000 #ffff00000000 #00000000ffff #ffffffff0000 #000000000000 0 True Klick to toggle through the DRO modes 28 #0000ffff0000 #ffff00000000 #00000000ffff #ffffffff0000 #000000000000 1 1 True Klick to toggle through the DRO modes 28 #0000ffff0000 #ffff00000000 #00000000ffff #ffffffff0000 #000000000000 2 2 True Klick to toggle through the DRO modes 28 #0000ffff0000 #ffff00000000 #00000000ffff #ffffffff0000 #000000000000 3 3 end 1 0 True False True 50 True 85 True Jog. Vel. False 0 True True adj_jog_vel 0 1 False 0 True 240 True True 0.5 True 5 5 5 5 True 5 3 4 3 3 True Y+ 50 50 True True True 1 2 GTK_SHRINK GTK_SHRINK Y- 50 50 True True True 1 2 2 3 GTK_SHRINK GTK_SHRINK X- 50 50 True True True 1 2 GTK_SHRINK GTK_SHRINK X+ 50 50 True True True 2 3 1 2 GTK_SHRINK GTK_SHRINK Z+ 50 50 True True True 3 4 GTK_SHRINK GTK_SHRINK 4+ 50 50 True True 2 3 GTK_SHRINK GTK_SHRINK Z- 50 50 True True True 3 4 2 3 GTK_SHRINK GTK_SHRINK 4- 50 50 True True 0.47999998927116394 2 3 2 3 GTK_SHRINK GTK_SHRINK True <b>Jogging</b> True 0 1 120 True 0.5 True 5 5 5 5 50 True 3 True <b>Jog Rates</b> True False 2 end 0 1 Ignore limits True True False True False False 2 3 True Manuell False True 1 True MDI 1 False True True automatic automatic True True 2 2 True True 3 True True 81 True 2 True Auto 2 False 2 1 False 1 0 200 True True True False 200 True True True Information over the tool in spindle 0.5 True 5 5 5 5 True 3 4 True True Tool no. 8 True 0 center 8 1 2 True Diameter 8 1 2 True 0 center 8 1 2 1 2 True offset z 8 2 3 True 0 center 8 2 3 1 2 True offset x 8 3 4 True 0 center 8 3 4 1 2 True No tool description available 4 2 3 True <b>Tool information</b> True 0 True G and M code information as well as speed and feed 0.5 True 5 5 5 5 True True True 0 active_mcodes_label 0 True 1 F 1 50 True 1 10000 False 2 0 True True 0 active_gcodes_label 0 True 1 3 S 1 50 True 1 3 10000 False 2 1 True <b>G-Code</b> True end 2 True The name and location of the loaded program 0.5 True 5 5 5 5 True No Program loaded True <b>Program</b> True end 1 0 False 2 175 True True 0.5 True 5 5 5 5 True True True Vel. 0 True Displays the current velocity 5 5 10000 center 1 0 True True adjust max vel of machine adj_max_vel True 0 1 True <b>Max. Velocity</b> True end 1 200 True 0.5 True 5 5 5 5 True True True Displayes the programmed feed rate F 275 0 100% 48 48 True True True reset feed override to 100 % False False 1 0 True True adjust feed override adj_feed on on True False 0 1 True <b>Feed Override [%]</b> True end 0 False 3 False 4 True True 100 True 0.5 True 0 0 5 5 5 5 True 2 True 56 56 True True True img_coolant_off GTK_SHRINK GTK_SHRINK 5 56 56 True True True img_mist_off 1 2 GTK_SHRINK GTK_SHRINK 5 True <b>Cooling</b> True False False 0 0 False 1 True 200 True 0.5 True 5 5 5 5 True True True True S 3500 0 100% 48 48 True True True False False 1 False 0 True True adj_spindle 0 False 1 False False 0 True 2 True 3 8 True 56 56 True True False False rbt_stop 48 48 True images/reverse.png GTK_SHRINK GTK_SHRINK 56 56 True True False False rbt_stop 48 48 True images/forward.png 2 3 GTK_SHRINK GTK_SHRINK 56 56 True True False True False 48 48 True images/stop.gif 1 2 GTK_SHRINK GTK_SHRINK False 5 0 True True 0.40000000596046448 #0000ffff0000 6000 #0000ffff0000 #0000ffff0000 #bebebebebebe %i -0.039999999105930328 #0000ffff0000 0.80000001192092896 0 True green False False 2 1 False 2 1 1 True <b>Spindle [rpm]</b> True False end 0 2 False 3 False False end 1 True Info False True 1 True Embeded keyboard 1 False 0 50 7 True True ● 3 4 GTK_SHRINK undo 48 True True True GTK_SHRINK GTK_SHRINK search back 48 True True True 2 3 GTK_SHRINK GTK_SHRINK search fwd 48 True True True 4 5 GTK_SHRINK GTK_SHRINK redo 48 True True True 6 7 GTK_SHRINK GTK_SHRINK True 1 2 True 5 6 False 1 False 1 True Main False True True True True never out True Debug False True True left 20 5 5 True True True True 0.5 True 5 5 3 3 True Start as fullscreen True True False True True False 0 Start maximized True True False True rbtn_fullscreen False 1 Start as window True True False True rbtn_fullscreen False 2 True 4 2 True 0 5 5 X Pos. GTK_SHRINK | GTK_FILL GTK_SHRINK True 0 5 5 Y Pos. 1 2 GTK_SHRINK | GTK_FILL GTK_SHRINK True 0 5 5 Width 2 3 GTK_SHRINK | GTK_FILL GTK_SHRINK True 0 5 5 Height 3 4 GTK_SHRINK | GTK_FILL GTK_SHRINK True False True ● 1 adj_x_pos 1 2 GTK_SHRINK 5 2 True False True ● 1 adj_y_pos 1 2 1 2 GTK_SHRINK 5 2 True False True ● 1 adj_width 1 2 2 3 GTK_SHRINK 5 2 True False True ● 1 adj_height 1 2 3 4 GTK_SHRINK 5 2 3 hide cursor True True False True 10 4 True <b>Main Window</b> True False False 0 True 0.5 True 5 5 3 3 True Show keyboard on offset True True False True True 0 Show keyboard on tooledit True True False True True 1 Show keyboard on MDI True True False True True 2 Show keyboard on EDIT True True False True True 3 Show keyboard on load file True True False True 4 True <b>Keyboard</b> True False False 5 1 True 0.5 True 5 5 3 3 True show preview True True False True True 0 show offsets True True False True rbtn_show_preview 1 True <b>On Touch off</b> True False False 5 2 True 0.5 True 5 5 3 3 True True 0 Grid size 0 True True ● 1 adj_grid_size 3 1 True <b>Preview</b> True False False 3 Display Aux Screen 100 56 True True True False False 4 False False 3 0 True True 0.5 True 5 5 3 3 True 9 2 3 True 0 Relative Color GTK_SHRINK | GTK_FILL GTK_SHRINK 5 True True True #000000000000 1 2 GTK_SHRINK 2 True 0 Absolute Color 1 2 GTK_SHRINK | GTK_FILL GTK_SHRINK 5 True True True #00000000ffff 1 2 1 2 GTK_SHRINK 2 True 0 DTG Color 2 3 GTK_SHRINK | GTK_FILL GTK_SHRINK 5 True True True #ffffffff0000 1 2 2 3 GTK_SHRINK 2 Use Auto Units True True False 1 True True 2 7 8 GTK_SHRINK | GTK_FILL GTK_SHRINK 5 Show the DRO Button True True False 1 True 2 6 7 GTK_SHRINK | GTK_FILL GTK_SHRINK 5 True 2 5 6 True 0 Homed color 3 4 GTK_SHRINK | GTK_FILL GTK_SHRINK 5 True 0 Unhomed color 4 5 GTK_SHRINK | GTK_FILL GTK_SHRINK 5 True True True #0000ffff0000 1 2 3 4 GTK_SHRINK 2 True True True #ffff00000000 1 2 4 5 GTK_SHRINK 2 True True 0 5 5 Size False 3 0 True True ● 1 adj_dro_size 1 True 1 2 8 9 True <b>DRO</b> True False False 0 True True 0.5 True 5 5 5 5 True Show offsets True True False True False 0 Show DRO True True False True False 1 Show DTG True True False 1 True False 2 True False 3 True <b>Mouse Button mode</b> True False False 4 True lst_button_mode 4 1 False False 5 True <b>Preview</b> True False False 0 True 1 1 False False 3 1 True True 0.5 True 5 5 3 3 True True ff_file_to_load False False 0 True current file 56 True False True True False False 5 0 none True True True False False 5 1 False False 5 1 True <b>File to load on start</b> True False False 0 True 0.5 True 5 5 3 3 True select-folder Select user dir True <b>Select jump to dir</b> True False False 5 1 True 0.5 True 5 5 3 3 True 4 2 True Themes 2 GTK_SHRINK 5 True lstst_themes 0 2 1 2 GTK_SHRINK 5 True 0 Warning Audio 2 3 GTK_SHRINK | GTK_FILL GTK_SHRINK True 0 Alert Audio 3 4 GTK_SHRINK | GTK_FILL GTK_SHRINK True 1 2 2 3 GTK_SHRINK | GTK_FILL GTK_SHRINK True 1 2 3 4 GTK_SHRINK | GTK_FILL GTK_SHRINK True <b>Themes and sound</b> True False False 5 2 True 3 False 3 2 True Apearance False True True True 0.5 True 5 5 3 3 True You can select a scale for the MPG to be applied, as default a value of (MAX - MIN) / 100 will be used 4 2 True 0 5 5 Scale max velocity GTK_SHRINK | GTK_FILL GTK_SHRINK | GTK_FILL True 0 5 5 Scale jog velocity 1 2 GTK_SHRINK | GTK_FILL GTK_SHRINK | GTK_FILL True 0 5 5 Scale feed override 2 3 GTK_SHRINK | GTK_FILL GTK_SHRINK | GTK_FILL True 0 5 5 Scale spindle override 3 4 GTK_SHRINK | GTK_FILL GTK_SHRINK | GTK_FILL True True ● 1 adj_scale_max_vel 1 1 2 5 2 True True ● 1 adj_scale_jog_vel 1 1 2 1 2 5 2 True True ● 1 adj_scale_feed_override 1 1 2 2 3 5 2 True True ● 1 adj_scale_spindle_override 1 1 2 3 4 5 2 True <b>Hardware MPG Scale</b> True False False 0 True 0.5 True 5 5 3 3 Use keyboard shortcuts True True False Do you want to use keyboard shortcuts to control the machine? True True <b>Keyboard shortcuts</b> True False False 1 True Select the way to unlock the settings page 0.5 True 5 5 3 3 True Use unlock code True True False True True False False 0 Do not use unlock code True True False True rbt_use_unlock False False 1 Use hal pin to unlock True True False True rbt_use_unlock False False 2 True <b>Unlock settings</b> True False False 5 2 True 0.5 True 5 5 3 3 True 3 2 True 0 Starting RPM GTK_SHRINK | GTK_FILL GTK_SHRINK 5 True True Select the speed to start the spindle with, when no spindle speed has been given. ● True 1 etched-in adj_start_spindle_RPM 1 True 1 2 GTK_SHRINK 2 True True Set the Min limit of the spindle feedback bar, this settings will not afect the INI values. ● True 1 etched-in adj_spindle_bar_min 1 True 1 2 1 2 GTK_SHRINK 2 True True Set the Max limit of the spindle feedback bar, this settings will not afect the INI values. ● True 1 etched-in adj_spindle_bar_max 1 True 1 2 2 3 GTK_SHRINK 2 True 0 Spindle bar min 1 2 GTK_SHRINK | GTK_FILL GTK_SHRINK 5 True 0 Spindle bar max 2 3 GTK_SHRINK | GTK_FILL GTK_SHRINK 5 True <b>Spindle</b> True False 3 False 0 True 1 1 True Hardware 1 False True True True True 0.5 True 5 5 3 3 True Use auto tool measurement True True False True False False 0 True False 0.5 True 5 5 3 3 True 5 2 True 0 X Pos. GTK_SHRINK | GTK_FILL GTK_SHRINK True 0 Y Pos. 1 2 GTK_SHRINK | GTK_FILL GTK_SHRINK True 0 Probe Height 4 5 GTK_SHRINK | GTK_FILL GTK_SHRINK True True ● 1 adj_probe_height 3 1 2 4 5 GTK_SHRINK 5 2 True 1 0.000 1 2 5 2 True 1 0.000 1 2 1 2 GTK_SHRINK 5 2 True 0 Z Pos. 2 3 GTK_SHRINK | GTK_FILL GTK_SHRINK True 1 0.000 1 2 2 3 GTK_SHRINK 5 2 True 0 Max. Probe 3 4 GTK_SHRINK | GTK_FILL GTK_SHRINK True 1 0.000 1 2 3 4 GTK_SHRINK 5 2 True <b>Probe Informations</b> True False False 1 True False 0.5 True 5 5 3 3 True 2 2 True 0 Search Vel. GTK_SHRINK | GTK_FILL GTK_SHRINK True 0 Probe Vel. 1 2 GTK_SHRINK | GTK_FILL GTK_SHRINK True True ● 1 adj_search_vel 1 2 GTK_SHRINK 5 2 True True ● 1 adf_probe_vel 1 2 1 2 GTK_SHRINK 5 2 True <b>Probe velocitys</b> True False False 2 True No valid configuration found in your INI file, please take a look at the WIKI to check how to configure the settings. True False False 3 True <b>Tool Measurement</b> True False False 0 True 0.5 True 5 5 3 3 True True 0 If the 4'th axis is used for a tool changer, you hide the DRO and jog buttons. False 0 Hide 4'th axis True True False True False 10 1 True <b>Tool Changer</b> True False False 5 1 False 0 True True 0.5 True 5 5 5 5 True 7 2 Use frames True True False True 2 5 6 True 0 5 5 Font 4 5 True 0 5 5 max. 3 4 GTK_SHRINK | GTK_FILL GTK_SHRINK True 0 5 5 Width 2 3 GTK_SHRINK | GTK_FILL GTK_SHRINK True True True Sans 10 1 2 4 5 True True ● 1 adj_max_messages True 1 2 3 4 GTK_SHRINK 5 2 True True ● 1 0.0099999997764825821 adj_width_popup True 1 2 2 3 GTK_SHRINK 5 2 True 0 5 5 Y Pos. 1 2 GTK_SHRINK | GTK_FILL GTK_SHRINK True 0 5 5 X Pos. GTK_SHRINK | GTK_FILL GTK_SHRINK True True ● 1 adj_x_pos_popup True 1 2 GTK_SHRINK 5 2 True True ● 1 adj_y_pos_popup True 1 2 1 2 GTK_SHRINK 5 2 Launch test message True True True 2 6 7 True <b> gmoccapy message behavior and appearance </b> True False False 0 False 5 1 True True Select if you want to use the "Run from line" option. This is not recommended at all! It is very dangerous, because LinucCNC will not take aware of any settings before that line. No offsets, no coordinate system change of feed or spindle speed changes will be noticed. 0.5 True 5 5 5 5 True Do not use run from line True True False True True False False 0 Use run from line True True False True rbtn_no_run_from_line False False 1 True <b>Run from line</b> True False False 5 0 True Log actions 48 48 True True True Log all actions to the history board, this is very usefull for debugging. False False 0 False False 1 False 5 2 5 0 2 True Advanced Settings 2 False 1 False True Settings 1 False True True automatic automatic True True False False alarm_buffer 2 True Alarm History 2 False 1 True Settings 1 False True True True True User tab 1 False 2 True User tabs 2 False 1 True False 2 100 True 3 True spread True True True Estop the machine True images/estopred.png False False 0 True True True Turn the machine on/off True images/machine_off.png False False 1 True True True True enter manual mode to jog axis by hand or touch off True img_manual True False rbt_auto False False 2 True True False enter MDI mode to launch g-code commands img_mdi False rbt_auto False False 3 True True False enter auto mode to run programs img_auto False False False 4 True True True Enter the settings page, the default code is "123" True images/configure-2.png False False 5 True True False show user tabs img_user_tabs False False 6 False 3 0 True False False True True 56 56 True True True open homing button list img_ref_al False False 0 56 56 True True True open touch off button list img_touch_off False False 1 56 56 True False False 2 56 56 True True True Open the tooleditor page top True images/tools.png False False 3 56 56 True False False 4 56 56 True False False 5 56 56 True False False 6 56 56 True True True make the preview as large as possible img_fullsize_preview False False 7 56 56 True False False 8 56 56 True True True Close moccapy / leave the program img_close False False 9 False True manuel button list False True True 56 56 True True True This button will show or hide the Keyboard True images/keyboard.png False False end 9 True 1 True MDI button list 1 False True True 56 56 True True True Load a new program img_open False False 0 56 56 True True True Run the loaded program img_run False False 1 56 56 True True True Stop the running program img_stop False False 2 56 56 True True True Pause the running program 48 48 True pause the running program images/pause.png False False 3 56 56 True True True Run the loaded program step by step img_step False False 4 56 56 True True True run the program from a certain line, attention, that is dangerous, because the previous lines will not checed! img_run_from False False 5 56 56 True True True Machine or not the optional blocks of the program. If the button is pressed, the optional blocks will not be machined. The button will indicate this by a yellow background. 48 48 True images/tool_blockdelete.gif False False 6 M1 56 56 True True True Make optional stops or not. if an M1 is programed and the button is pressed (is active) the programm will pause if it found a M1 False False 7 56 56 True True True img_fullsize_preview1 False False 8 56 56 True True True Edit the loaded program img_editor False False 9 2 True Auto button list 2 False True True 56 56 True False False 0 56 56 True True True home all axis 48 48 True images/refall.png False False 1 56 56 True False False 2 56 56 True True True home x axis 48 48 True images/refx.png False False 3 56 56 True True True home y axis 48 48 True images/refy.png False False 4 False False 5 56 56 True True True home z axis 48 48 True images/refz.png False False 6 56 56 True True 48 48 True images/refa.png False False 7 56 56 True False False 8 56 56 True True True Unhome all axis 48 48 True images/unhome.png False False 9 56 56 True False False 10 56 56 True True True go back to main button list img_back_ref False False 11 3 homing button 3 False True True edit offsets 56 56 True True True Edit offsets False False 0 56 56 True True True touch off X / set X to 0 48 48 True images/touchoffx.png False False 1 56 56 True True True touch off Y / set Y to 0 48 48 True images/touchoffy.png False False 2 56 56 False False 3 56 56 True True True touch off Z / set Z to 0 48 48 True touch off z / set z to 0 images/touchoffz.png False False 4 zero G92 56 56 True True Zero all G92 offsets False False 5 Block Height True True True False False 6 56 56 True True True touch off X / set X to an desired value 48 48 True images/touchoffx_value.png False False 7 56 56 True True True touch off Y / set Y to an desired value 48 48 True images/touchoffy_value.png False False 8 56 56 False False 9 56 56 True True True touch off Z / set Z to an desired value 48 48 True images/touchoffz_value.png False False 10 set selected 56 56 True True True set the selected coordinate system to be the active one False False 11 56 56 True True True Go back to main view img_back_zero False False 12 4 True touch_off button 4 False True True delete MDI 56 56 True True True delete MDI history False False 0 56 56 True False False 1 56 56 True <b>gmoccapy 1.0.3</b> True False False 2 56 56 True False False 3 Cl.-ladder 56 56 True True True Open classicladder False False 4 Hal-Scope 56 56 True True True launch hal scope False False 5 Status 56 56 True True True launch linuxcnc status False False 6 Hal Meter 56 56 True True True launch hal meter 0.51999998092651367 False False 7 Calibration 56 56 True True True launch calibration False False 8 Halshow 56 56 True True True opens the show hal tool False False 9 5 True setup button list 5 False True True 56 56 True False False 0 56 56 True False False 1 56 56 True True True save the file with the original name hal_action_save right 48 48 True gtk-save False False 2 56 56 True True True save the file with a new name hal_action_saveas 48 48 True gtk-save-as False False 3 56 56 True True True save the program reload it and run it 48 48 True gtk-media-play False False 4 56 56 True False False 5 56 56 True True True clear the edit field and make a new file 48 48 True gtk-new False False 6 56 56 True False False 7 56 56 True True True Show or hide the virtual keyboard 48 48 True images/keyboard.png False False 8 56 56 True True True Go back to main button list img_back_zero1 False False 9 6 True edit buttons 6 False True Delete 56 56 True True True delete selected tool or tools False False 0 Add 56 56 True True True add a new tool to tool table False False 1 Reload 56 56 True True True reload tool table from file False False 2 Apply 56 56 True True True apply the changes you made, G43 will be excecuted only if it is active g-code False False 3 56 56 True True True Select a tool by number True images/tool_by_no.svg False False 4 56 56 True True True change tool with the command M61 Q?, no machine move will be done True images/index_tool.svg False False 5 56 56 True True True change tool to the selected one img_toolchange False False 6 touchoff tool x 56 56 True False True True touch off the tool and set the value to the tool table False False 7 56 56 True False False 8 touchoff tool z 56 56 True False True True touch off the tool and set the value to the tool table False False 9 56 56 True True True Go back to main button list img_back_tool False False 10 7 True tool 7 False True True 56 56 True True True Move to your home directory img_home False False 0 56 56 True True True Move to parrent directory img_dir_up False False 1 56 56 True False False 2 56 56 True True True Select the previos file img_sel_prev top False False 3 56 56 True True True Select the next file img_sel_next top False False 4 56 56 True True True Jump to user defined directory img_jump_to top False False 5 56 56 True False False 6 56 56 True True True select the highlighted file and return the path img_select top False False 7 56 56 True False False 8 56 56 True True True Close without returning a file path img_back_file_load False False 9 8 True Load File 8 False False False end 1 1500 10500 50 48 48 True images/E-Stop.gif 100 150 1 100 200 1 1800 8500 100 True images/machine_on.png True images/refall.png True images/unhome.png 48 48 True images/forward.png 48 48 True images/forward_on.gif 48 48 True images/reverse_on.gif 48 48 True images/stop_on.gif 48 48 True images/stop.gif True images/exit_application.png True images/editor.png True images/touchoffwz.png test test2 100 0.10000000000000001 300 50 10000 25 True 3 edit-undo gtk-save gcode_view gtk-save-as document-save gcode_view True images/coolant_on.gif True images/mist_on.gif True images/toolchange.png True images/stop.png True images/manual_mode.png True images/auto_mode.png True images/refb.png True images/zoom-in.png True images/zoom-out.png True images/fullscreen_preview.png True images/user_tabs.png 10000 50 6000 100000 50 1 0.10000000022351742 1000 0.10000000000000001 1 0.10000000000000001 1000 0.10000000000000001 1 0.10000000000000001 10 0.10000000000000001 1 0.10000000000000001 10 0.10000000000000001 10 1024 1 10 768 1 979 979 1280 1 750 750 2000 1 True edit-undo True images/toolchange.png True edit-undo True edit-undo True images/refall.png True images/touchoffwz.png True images/exit_application.png True gtk-home True gtk-sort-ascending True gtk-go-back True gtk-go-forward True gtk-jump-to True gtk-ok True images/refc.png True images/refu.png True images/refv.png True images/refw.png True images/mdi_mode.png True gtk-open True images/start.png True images/stop.png True False images/runfrom.png True images/fullscreen_preview.png True edit-undo 10 2000 1 10 2000 1 200 100 1280 1 10 1 25 1 32.429000000000002 100 0.001 100 10000 1 10 100 1 True images/step.png True images/coolant_off.png True images/mist_off.png 0 left rotate, middle move, right zoom 1 left zoom, middle move, right rotate 2 left move, middle rotate, right zoom 3 left zoom, middle rotate, right move 4 left move, middle zoom, right rotate 5 left rotate, middle zoom, right move 28 20 56 1