= Point n Click Configurator Wizard[[cha:PNCconf-Wizard]]
(((PNCconf Wizard)))

The Point n Click Configurator covers Mesa cards and parallel port
stepper configurations. If you have a simple parallel port stepper
machine the StepConf Wizard might be a better choice. The Point n Click
Configurator can generate some advanced configurations without knowing
anything about HAL.

Start the PnCConf program from the CNC menu or from a terminal window
with `pncconf`. For more information on the terminal window see the
Linux FAQ section.

[float]
Step by Step Instructions
=========================

.PnCConf Splash

image::images/pncconf-splash.png[]

== Basic Machine Information

Machine Name::
    What you want to call your machine and must not have any spaces.

.PnCConf Basic

image::images/pncconf-basic.png[]

== GUI Configuration

Here you can select from different GUIs and options for each one.

.GUI Configuration

image::images/pncconf-gui.png[]

== Mesa Configuration

.Mesa Configuration

image::images/pncconf-mesa-config.png[]

== Mesa I/O Setup

.Mesa I/O C2

image::images/pncconf-mesa-io2.png[]

.Mesa I/O C3

image::images/pncconf-mesa-io3.png[]

.Mesa I/O C4

image::images/pncconf-mesa-io4.png[]

== Axis Configuration

.Axis Drive Configuration

image::images/pncconf-axis-drive.png[]

.Axis Configuration

image::images/pncconf-axis-config.png[]

== Advanced Options

.Advanced Options

image::images/pncconf-advanced.png[]

== HAL Components

On this page you can add additional HAL components you might need.

.HAL Components

image::images/pncconf-hal.png[]


// vim: set syntax=asciidoc: