# EMC controller parameters for a simulated machine.
[TOUCHY]
MACRO=increment xinc yinc
MACRO=probe-hole maxradius

[EMC]

# Name of machine, for use with display, etc.
MACHINE =  pyngcgui-touchy demo

# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
#DEBUG =               0x7FFFFFFF
DEBUG = 0x0

[DISPLAY]
EMBED_TAB_NAME = Pyngcgui
EMBED_TAB_COMMAND = gladevcp -x {XID} pyngcgui_touchy_popupkeyboard.ui

EMBED_TAB_NAME = Gremlinview
EMBED_TAB_COMMAND = gladevcp -x {XID} gremlin_view.ui

# these are interpreted by ngcgui:
#NGCGUI_OPTIONS   = opt1 opt2 ...
# opt items:
#   nonew      -- disallow making   new tab page
#   noremove   -- disallow removing any tab page
#   noauto     -- no autosend (makeFile, then manually send)
#   noiframe   -- no internal image, image  on separate toplevel
#   nom2       -- no m2 terminator (use %)
# these are interpreted by touchy:
NGCGUI_PREAMBLE   = in_std.ngc
NGCGUI_SUBFILE    = simp.ngc
NGCGUI_SUBFILE    = db25.ngc
NGCGUI_SUBFILE    = gosper.ngc
NGCGUI_SUBFILE    = xyz.ngc
NGCGUI_SUBFILE    = ihex.ngc
NGCGUI_SUBFILE    = slot.ngc
NGCGUI_SUBFILE    = rectangle_probe.ngc
NGCGUI_SUBFILE    = arc2.ngc
NGCGUI_SUBFILE    = iquad.ngc
NGCGUI_SUBFILE    = qpocket.ngc
NGCGUI_SUBFILE    = ""

DISPLAY = touchy

PROGRAM_PREFIX = ../../nc_files/

INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5

[TASK]

TASK =                  milltask
CYCLE_TIME =            0.001

[RS274NGC]
SUBROUTINE_PATH   = ../../nc_files/ngcgui_lib:../../nc_files/ngcgui_lib/utilitysubs
USER_M_PATH       = ../../nc_files/ngcgui_lib/mfiles

# File containing interpreter variables
PARAMETER_FILE =        sim.var

[EMCMOT]

EMCMOT =              motmod

# Timeout for comm to emcmot, in seconds
COMM_TIMEOUT =          1.0

# Interval between tries to emcmot, in seconds
COMM_WAIT =             0.010

# BASE_PERIOD is unused in this configuration but specified in core_sim.hal
BASE_PERIOD  =               0
# Servo task period, in nano-seconds
SERVO_PERIOD =               1000000

[HAL]

HALFILE = core_sim.hal
HALFILE = touchy_sim.tcl


[TRAJ]

AXES =                  3
COORDINATES =           X Y Z
HOME =                  0 0 0
LINEAR_UNITS =          inch
ANGULAR_UNITS =         degree
CYCLE_TIME =            0.010
DEFAULT_VELOCITY =      1.2
MAX_LINEAR_VELOCITY =   4

# Axes sections ---------------------------------------------------------------

# First axis
[AXIS_0]

TYPE =                          LINEAR
HOME =                          0.000
MAX_VELOCITY =                  4
MAX_ACCELERATION =              100.0
BACKLASH = 0.000
INPUT_SCALE =                   4000
OUTPUT_SCALE = 1.000
MIN_LIMIT =                     -40.0
MAX_LIMIT =                     40.0
FERROR = 0.050
MIN_FERROR = 0.010
HOME_OFFSET =                    0.0
HOME_SEARCH_VEL =                0.0
HOME_LATCH_VEL =                 0.0
HOME_USE_INDEX =                 NO
HOME_IGNORE_LIMITS =             NO
HOME_SEQUENCE = 1

# Second axis
[AXIS_1]

TYPE =                          LINEAR
HOME =                          0.000
MAX_VELOCITY =                  4
MAX_ACCELERATION =              100.0
BACKLASH = 0.000
INPUT_SCALE =                   4000
OUTPUT_SCALE = 1.000
MIN_LIMIT =                     -40.0
MAX_LIMIT =                     40.0
FERROR = 0.050
MIN_FERROR = 0.010
HOME_OFFSET =                    0.0
HOME_SEARCH_VEL =                0.0
HOME_LATCH_VEL =                 0.0
HOME_USE_INDEX =                 NO
HOME_IGNORE_LIMITS =             NO
HOME_SEQUENCE = 1

# Third axis
[AXIS_2]

TYPE =                          LINEAR
HOME =                          0.0
MAX_VELOCITY =                  4
MAX_ACCELERATION =              100.0
BACKLASH = 0.000
INPUT_SCALE =                   4000
OUTPUT_SCALE = 1.000
MIN_LIMIT =                     -4.0
MAX_LIMIT =                     4.0
FERROR = 0.050
MIN_FERROR = 0.010
HOME_OFFSET =                    1.0
HOME_SEARCH_VEL =                0.0
HOME_LATCH_VEL =                 0.0
HOME_USE_INDEX =                 NO
HOME_IGNORE_LIMITS =             NO
HOME_SEQUENCE = 0

# section for main IO controller parameters -----------------------------------
[EMCIO]

# Name of IO controller program, e.g., io
EMCIO = 		io

# cycle time, in seconds
CYCLE_TIME =    0.100

# tool table file
TOOL_TABLE =    sim.tbl
TOOL_CHANGE_POSITION = 0 0 2