# EMC controller parameters for a simulated machine. # General note: Comments can either be preceded with a # or ; - either is # acceptable, although # is in keeping with most linux config files. # General section ------------------------------------------------------------- [EMC] # Version of this INI file VERSION = $Revision$ # Name of machine, for use with display, etc. MACHINE = LinuxCNC-HAL-SIM-LATHE # Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others # DEBUG = 0x7FFFFFFF DEBUG = 0 # Sections for display options ------------------------------------------------ [DISPLAY] # Name of display program, e.g., xemc DISPLAY = axis PYVCP = lathe.xml LATHE = 1 EDITOR = gedit # Cycle time, in seconds, that display will sleep between polls CYCLE_TIME = 0.100 # Path to help file HELP_FILE = doc/help.txt # Initial display setting for position, RELATIVE or MACHINE POSITION_OFFSET = RELATIVE # Initial display setting for position, COMMANDED or ACTUAL POSITION_FEEDBACK = ACTUAL # Highest value that will be allowed for feed override, 1.0 = 100% MAX_FEED_OVERRIDE = 1.2 MAX_SPINDLE_OVERRIDE = 1.0 # Prefix to be used PROGRAM_PREFIX = ../../nc_files/ # Introductory graphic INTRO_GRAPHIC = linuxcnc.gif INTRO_TIME = 5 USER_COMMAND_FILE = ~/.axisrc [FILTER] PROGRAM_EXTENSION = .png,.gif,.jpg Grayscale Depth Image PROGRAM_EXTENSION = .py Python Script png = image-to-gcode gif = image-to-gcode jpg = image-to-gcode py = python # Task controller section ----------------------------------------------------- [TASK] # Name of task controller program, e.g., milltask TASK = milltask # Cycle time, in seconds, that task controller will sleep between polls CYCLE_TIME = 0.001 # Part program interpreter section -------------------------------------------- [RS274NGC] # File containing interpreter variables PARAMETER_FILE = sim-lathe.var # Motion control section ------------------------------------------------------ [EMCMOT] EMCMOT = motmod # Timeout for comm to emcmot, in seconds COMM_TIMEOUT = 1.0 # Interval between tries to emcmot, in seconds COMM_WAIT = 0.010 # Base task period, in nano-seconds - this is the fastest thread in the machine BASE_PERIOD = 50000 # Servo task period, in nano-seconds - will be rounded to an integer multiple # of BASE_PERIOD SERVO_PERIOD = 1000000 # Hardware Abstraction Layer section -------------------------------------------------- [HAL] # The run script first uses halcmd to execute any HALFILE # files, and then to execute any individual HALCMD commands. # # list of hal config files to run through halcmd # files are executed in the order in which they appear HALFILE = core_sim.hal HALFILE = axis_manualtoolchange.hal HALFILE = simulated_home.hal HALFILE = lathe.hal # list of halcmd commands to execute # commands are executed in the order in which they appear #HALCMD = save neta # Single file that is executed after the GUI has started. Only supported by # AXIS at this time (only AXIS creates a HAL component of its own) POSTGUI_HALFILE = lathe_postgui.hal # Trajectory planner section -------------------------------------------------- [TRAJ] AXES = 3 COORDINATES = X Z LINEAR_UNITS = inch ANGULAR_UNITS = degree CYCLE_TIME = 0.010 DEFAULT_VELOCITY = 1.0 MAX_VELOCITY = 3.333334 DEFAULT_ACCELERATION = 20.0 MAX_ACCELERATION = 20.0 # Axes sections --------------------------------------------------------------- # First axis [AXIS_0] TYPE = LINEAR HOME = 0.000 MAX_VELOCITY = 3.333334 MAX_ACCELERATION = 20.0 BACKLASH = 0.000 INPUT_SCALE = 4000 OUTPUT_SCALE = 1.000 MIN_LIMIT = -10.0 MAX_LIMIT = 10.0 FERROR = 0.050 MIN_FERROR = 0.010 HOME_OFFSET = 1.0 HOME_SEARCH_VEL = 5.0 HOME_LATCH_VEL = 1.0 HOME_USE_INDEX = NO HOME_IGNORE_LIMITS = NO HOME_SEQUENCE = 0 HOME_IS_SHARED = 1 [AXIS_2] TYPE = LINEAR HOME = 0.0 MAX_VELOCITY = 3.333334 MAX_ACCELERATION = 20.0 BACKLASH = 0.000 INPUT_SCALE = 4000 OUTPUT_SCALE = 1.000 MIN_LIMIT = -2.0 MAX_LIMIT = 4.0 FERROR = 0.050 MIN_FERROR = 0.010 HOME_OFFSET = 1.0 HOME_SEARCH_VEL = 5.0 HOME_LATCH_VEL = 1.0 HOME_USE_INDEX = NO HOME_IGNORE_LIMITS = NO HOME_SEQUENCE = 1 HOME_IS_SHARED = 1 # section for main IO controller parameters ----------------------------------- [EMCIO] # Name of IO controller program, e.g., io EMCIO = io # cycle time, in seconds CYCLE_TIME = 0.100 # tool table file TOOL_TABLE = lathe.tbl TOOL_CHANGE_POSITION = 2 0 1 TOOL_CHANGE_WITH_SPINDLE_ON = 1