loadrt trivkins

# core HAL config file for steppers

# first load the stepper module
loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD traj_period_nsec=[EMCMOT]TRAJ_PERIOD

loadrt stepgen step_type=0,0,0,0,0,0

# hook its functions to realtime threads
addf stepgen.capture-position servo-thread
addf stepgen.update-freq servo-thread
addf stepgen.make-pulses base-thread 

#add motion controller to the threads
addf motion-command-handler servo-thread
addf motion-controller servo-thread


# connect position commands from motion module to step generator
net Xpos-cmd <= axis.0.motor-pos-cmd
net Xpos-cmd => stepgen.0.position-cmd
net Ypos-cmd <= axis.1.motor-pos-cmd
net Ypos-cmd => stepgen.1.position-cmd
net Zpos-cmd <= axis.2.motor-pos-cmd
net Zpos-cmd => stepgen.2.position-cmd
net Apos-cmd <= axis.3.motor-pos-cmd
net Apos-cmd => stepgen.3.position-cmd
net Bpos-cmd <= axis.4.motor-pos-cmd
net Bpos-cmd => stepgen.4.position-cmd
net Cpos-cmd <= axis.5.motor-pos-cmd
net Cpos-cmd => stepgen.5.position-cmd

# connect position feedback from step generators
# to motion module
net Xpos-fb <= stepgen.0.position-fb
net Xpos-fb => axis.0.motor-pos-fb
net Ypos-fb <= stepgen.1.position-fb
net Ypos-fb => axis.1.motor-pos-fb
net Zpos-fb <= stepgen.2.position-fb
net Zpos-fb => axis.2.motor-pos-fb
net Apos-fb <= stepgen.3.position-fb
net Apos-fb => axis.3.motor-pos-fb
net Bpos-fb <= stepgen.4.position-fb
net Bpos-fb => axis.4.motor-pos-fb
net Cpos-fb <= stepgen.5.position-fb
net Cpos-fb => axis.5.motor-pos-fb

# connect enable signals for step generators
net Xen <= axis.0.amp-enable-out
net Xen => stepgen.0.enable
net Yen <= axis.1.amp-enable-out
net Yen => stepgen.1.enable
net Zen <= axis.2.amp-enable-out
net Zen => stepgen.2.enable
net Aen <= axis.3.amp-enable-out
net Aen => stepgen.3.enable
net Ben <= axis.4.amp-enable-out
net Ben => stepgen.4.enable
net Cen <= axis.5.amp-enable-out
net Cen => stepgen.5.enable


# connect signals to step pulse generator outputs
net Xstep stepgen.0.step
net Xdir stepgen.0.dir
net Ystep stepgen.1.step
net Ydir stepgen.1.dir
net Zstep stepgen.2.step
net Zdir stepgen.2.dir
net Astep stepgen.3.step
net Adir stepgen.3.dir
net Bstep stepgen.4.step
net Bdir stepgen.4.dir
net Cstep stepgen.5.step
net Cdir stepgen.5.dir

# set stepgen module scaling - get values from ini file
setp stepgen.0.position-scale [AXIS_0]INPUT_SCALE
setp stepgen.1.position-scale [AXIS_1]INPUT_SCALE
setp stepgen.2.position-scale [AXIS_2]INPUT_SCALE
setp stepgen.3.position-scale [AXIS_3]INPUT_SCALE
setp stepgen.4.position-scale [AXIS_4]INPUT_SCALE
setp stepgen.5.position-scale [AXIS_5]INPUT_SCALE

# set stepgen module velocity limits - get values from ini file
setp stepgen.0.maxvel [AXIS_0]STEPGEN_MAXVEL
setp stepgen.1.maxvel [AXIS_1]STEPGEN_MAXVEL
setp stepgen.2.maxvel [AXIS_2]STEPGEN_MAXVEL
setp stepgen.3.maxvel [AXIS_3]STEPGEN_MAXVEL
setp stepgen.4.maxvel [AXIS_4]STEPGEN_MAXVEL
setp stepgen.5.maxvel [AXIS_5]STEPGEN_MAXVEL

# set stepgen module accel limits - get values from ini file
setp stepgen.0.maxaccel [AXIS_0]STEPGEN_MAXACCEL
setp stepgen.1.maxaccel [AXIS_1]STEPGEN_MAXACCEL
setp stepgen.2.maxaccel [AXIS_2]STEPGEN_MAXACCEL
setp stepgen.3.maxaccel [AXIS_3]STEPGEN_MAXACCEL
setp stepgen.4.maxaccel [AXIS_4]STEPGEN_MAXACCEL
setp stepgen.5.maxaccel [AXIS_5]STEPGEN_MAXACCEL

# load realtime portion of scope, just to have it handy
loadrt scope_rt