# A simulator to simulate all compnents of a gantry based plasma cutting table with THC

# Load realtime wcomp components
loadrt wcomp count=6

# Add components to servo-thread
addf and2.9 servo-thread
addf and2.10 servo-thread
addf and2.11 servo-thread
addf not.3 servo-thread
addf or2.9 servo-thread
addf wcomp.0 servo-thread
addf wcomp.1 servo-thread
addf wcomp.2 servo-thread
addf wcomp.3 servo-thread
addf wcomp.4 servo-thread
addf wcomp.5 servo-thread

# Use machine position feedback for simulated limit calculations
net PosX-fb => wcomp.0.in
net PosY-fb => wcomp.1.in
net PosZ-fb => wcomp.2.in
net PosA-fb => wcomp.3.in
net PosZ-fb => wcomp.4.in

# Use the time left from oneshot1 to determine when to simulate ArcOK along with TorchOn
net TimeLeft oneshot.1.time-left => wcomp.5.in

# Simulate limits with wcomps
net LimitX wcomp.0.out => axis.0.neg-lim-sw-in axis.0.pos-lim-sw-in axis.0.home-sw-in
net LimitY wcomp.1.out => axis.1.neg-lim-sw-in axis.1.pos-lim-sw-in axis.1.home-sw-in
net LimitZ or2.9.out => or2.2.in0
net LimitA wcomp.3.out => axis.3.neg-lim-sw-in axis.3.pos-lim-sw-in axis.3.home-sw-in

# Hook up other simulated signals
net FloatSwitch and2.9.out => or2.1.in1 and2.4.in0 and2.5.in1 and2.6.in1
net ArcOK and2.10.out => or2.4.in1 xor2.1.in1 oneshot.2.in
net IgnDebugTimer wcomp.5.out and2.10.in0
net ArcOKSwitch and2.11.out and2.10.in1

# Fix the problem with the float switch being triggered during homing because machine starts at pos 0
net MachineIsHoming axis.2.homing = not.3.in
net InvertedMachineIsHoming not.3.out => and2.9.in0
net OriginalFloatSignal wcomp.4.out => and2.9.in1

# Set defaults to pass signals through as normal so that ArcOK lights
net HomeAndLimitZ wcomp.2.out => or2.9.in0
net TorchOn => and2.11.in0

# To test what happens when ArcOK never arrives we can set and2.11.in1 to 0
setp and2.11.in1 1
# To simulate the float switch triggering at other machine coordinates than standard we use or2.9.in0 and set it manually
setp or2.9.in1 0

# Set windows for comparison
setp wcomp.0.max -10
setp wcomp.0.min -15
setp wcomp.1.max -10
setp wcomp.1.min -15
setp wcomp.2.max 50 
setp wcomp.2.min 40 
setp wcomp.3.max -10
setp wcomp.3.min -15
setp wcomp.4.max 15
setp wcomp.4.min 10
# ArcOK comarator, uses ignition timeout
setp wcomp.5.max 4
setp wcomp.5.min -1