FDA inconveniences
# reasons hplusroadmap has been banned by the Federal Death Administration
* Distribution and manufacture of antibodies
* Personal ultrasound imaging using finger snaps
* Ultrasound imaging without a prescription
* Manufacture of unapproved sound-emitting devices
* nootropics
* vitamins (isn't there an exemption?)
* cryopreservation
* prosthetics
* exoskeletons
* wheelchairs
* software, apps, etc.
* diagnostics, such as dna sequencing and single nucleotide polymorphisms
# sensor pads
from
An especially absurd example of device delay occurred to the Sensor Pad. The Sensor Pad is so simple it hardly justifies the term device: it is two sheets of sealed plastic that sandwich a silicon lubricant. With the Sensor Pad, a woman can more easily detect unusual breast lumps in a self-examination. Although the product is simple, it is quite useful and can save lives through early detection of breast cancer. The Sensor Pad was invented in 1986 by Earl Wright of Inventive Products and was submitted to the FDA for approval. The FDA, however, could find no other substantially equivalent product on the market and thus automatically classified the Sensor Pad as a high-risk, Class III device. Before being allowed to sell the Sensor Pad, Inventive Products had to submit a premarket approval application to the FDA.
Inventive Products submitted hundreds of pages documenting the safety and effectiveness of the Sensor Pad (both of which were evident to anyone who used the product for sixty seconds), yet years went by, and still the FDA wanted more documents. As it turned out, the FDA decided that in order for the device to be approved, Inventive Products needed to show not simply that the Sensor Pad helped women to detect breast lumps but that it reduced the mortality of breast cancer. Proof of this kind would require extensive clinical trials involving thousands of women tracked over many years—all this in order to get permission to sell a device substantially less complicated and less dangerous than a toaster oven.
Canada, western Europe, Japan, and other countries quickly approved the Sensor Pad. In Canada, a country that is hardly known as the Wild West of medical devices, the Sensor Pad was approved in thirty days with approximately half a dozen pages of documentation. Frustrated at the delay, Inventive Products defied the FDA and in 1988 began selling the Sensor Pad to hospitals.
Hospitals bought several hundred thousand Sensor Pads and gave them to women, some of whom would later testify in Congress that the product had saved their lives. Doctors too began to use the device and reported positive results. In 1989, however, the FDA raided Inventive Products and a number of hospitals (!) and “on behalf of American women” confiscated the Sensor Pads. Several lawsuits and several years later the product was still not available in the United States.
In April 1994, the situation began to change when the Wall Street Journal ran a story on the Sensor Pad that was later discussed in Congress by Representative John Duncan of Tennessee (the Congressional Record contains Duncan’s remarks and the Wall Street Journal story). Later that same year, ABC’s 20/20 did an investigative report on the FDA highlighting the Sensor Pad fiasco as well as other examples of device delay (see, for example, the Baby Ventilator Incident). The next year, Congress held hearings at which a number of women and doctors testified in favor of the Sensor Pad. Finally, after nearly ten years of delay and several million dollars in legal and other costs, the Sensor Pad was approved in December 1995. But the mandarins at the FDA had the last word: they decreed that the Sensor Pad was to be used only with a doctor’s prescription!
The lesson of the Sensor Pad is not simply one of FDA intransigence. The larger lesson reveals itself when we consider that if Inventive Products had not defied the FDA, there would have been no women ready and able to testify in Congress that the Sensor Pad saved their lives. The media paid attention because it could place a human face on the Sensor Pad story. If Inventive Products had not defied the FDA, knowledge of the Sensor Pad would not have leaked out from behind the FDA’s wall of silence. (It’s noteworthy that, since the Safe Medical Devices Act of 1990, the FDA can fine companies up to $1 million for an alleged violation of the Food, Drug, and Cosmetic Act of 1938 related to medical devices. Inventive Products probably could not afford to defy the FDA today.) Tragically, the usual situation is for information to remain locked behind FDA doors. We rarely get to try products that the FDA fails to approve, and we never get to try products that are never brought into existence because FDA rules and regulations have made research and development uneconomic. As a result, the public remains ignorant of the true costs of FDA power. (The section FDA Incentives discusses this problem at greater length.) It is only in rare cases, when the FDA withdraws approval from a product (recall the lotronex example) or bans an already existing product, that the true costs become clearer.